tmk
12 years ago
parent
16a583d7fd
commit
208f6d7f91
@ -1,151 +0,0 @@
|
|||||||
Alternative Controller for HHKB
|
|
||||||
===============================
|
|
||||||
|
|
||||||
Feature
|
|
||||||
-------
|
|
||||||
- Mouse Keys
|
|
||||||
- NKRO on USB(PJRC Tennsy only)
|
|
||||||
- Keymap Layers
|
|
||||||
|
|
||||||
|
|
||||||
Customize Keymap
|
|
||||||
----------------
|
|
||||||
see keymap.c.
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
Build
|
|
||||||
=====
|
|
||||||
PJRC Teensy
|
|
||||||
-----------
|
|
||||||
0. Edit matrix.c.
|
|
||||||
adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
|
|
||||||
1. Define macros in config_pjrc.h.(Optional)
|
|
||||||
VENDOR_ID, PRODUCT_ID and string descriptor.
|
|
||||||
IS_COMMAND
|
|
||||||
2. Edit Makefile for MCU setting and build options.
|
|
||||||
MCU, F_CPU
|
|
||||||
MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, NKRO_ENABLE
|
|
||||||
3. Build hex file.
|
|
||||||
$ make -f Makefile.pjrc
|
|
||||||
4. Program MCU.
|
|
||||||
$ make -f Makefile.pjrc program
|
|
||||||
|
|
||||||
|
|
||||||
V-USB
|
|
||||||
-----
|
|
||||||
0. Edit matrix.c and usbconfig.h.
|
|
||||||
adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
|
|
||||||
define macros for V-USB in usbconfig.h.
|
|
||||||
1. Define macros in config_vusb.h.(Optional)
|
|
||||||
IS_COMMAND
|
|
||||||
2. Edit Makefile.vusb for MCU setting and build options.
|
|
||||||
MCU, F_CPU
|
|
||||||
MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
|
|
||||||
3. Build hex file.
|
|
||||||
$ make -f Makefile.vusb
|
|
||||||
4. Program MCU.
|
|
||||||
$ make -f Makefile.vusb program
|
|
||||||
|
|
||||||
Using a bootloader to program for convenience is recommended.
|
|
||||||
Once program this V-USB bootloader at first, you can program MCU without
|
|
||||||
extra programmer. You should have reset switch to start up as bootloader
|
|
||||||
mode in this case.
|
|
||||||
USBaspLoader:
|
|
||||||
http://www.obdev.at/products/vusb/usbasploader.html
|
|
||||||
|
|
||||||
|
|
||||||
iWRAP
|
|
||||||
-----
|
|
||||||
0. Edit matrix.c and usbconfig.h.
|
|
||||||
adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
|
|
||||||
define macros for V-USB in usbconfig.h.
|
|
||||||
1. Define macros in config_iwrap.h.(Optional)
|
|
||||||
IS_COMMAND
|
|
||||||
2. Edit Makefile.iwrap for MCU setting and build options.
|
|
||||||
MCU, F_CPU
|
|
||||||
MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
|
|
||||||
3. Build hex file.
|
|
||||||
$ make -f Makefile.iwrap
|
|
||||||
4. Program MCU.
|
|
||||||
$ make -f Makefile.iwrap program
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
Hardware
|
|
||||||
========
|
|
||||||
PJRC Teensy
|
|
||||||
-----------
|
|
||||||
+---------------+
|
|
||||||
| Teensy++ |
|
|
||||||
| |
|
|
||||||
| | HHKB
|
|
||||||
| | ~~~~
|
|
||||||
| PB0-2|------->ROW(6-8)
|
|
||||||
| PB3-5|------->COL(9-11)
|
|
||||||
| PB6|------->ENABLE(12)
|
|
||||||
| PE6|<-------KEY(4)
|
|
||||||
| PE7|------->PREV(5)
|
|
||||||
| |
|
|
||||||
| |
|
|
||||||
| |
|
|
||||||
+---------------+
|
|
||||||
|
|
||||||
|
|
||||||
V-USB
|
|
||||||
-----
|
|
||||||
+---+ +---------------+
|
|
||||||
USB GND | | ATmega168 |
|
|
||||||
~~~ C3 | |
|
|
||||||
5V <-------+--------+---|Vcc,AVCC | HHKB
|
|
||||||
R1 | | ~~~~
|
|
||||||
D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8)
|
|
||||||
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
|
||||||
Z1 Z2 | PC3|------->ENABLE(12)
|
|
||||||
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
|
||||||
| PB1|------->PREV(5)
|
|
||||||
| |
|
|
||||||
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
|
||||||
X1 | TXD|<-------Debug Console
|
|
||||||
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
|
||||||
+---------------+
|
|
||||||
R1: 1.5K Ohm
|
|
||||||
R2,R3: 68 Ohm
|
|
||||||
Z1,Z2: Zener 3.6V
|
|
||||||
C1,C2: 22pF
|
|
||||||
C3: 0.1uF
|
|
||||||
X1: Crystal 20MHz(16MHz/12MHz)
|
|
||||||
SW: Push Switch(Optional for bootloader)
|
|
||||||
|
|
||||||
|
|
||||||
iWRAP
|
|
||||||
-----
|
|
||||||
+---------------+ WT12
|
|
||||||
5V | ATmega168 | 5V/3.3V~~~~
|
|
||||||
+-----+---|Vcc,AVCC PC4|---/--->iWRAP(RxD)
|
|
||||||
USB | C3 | PC5|<--/----iWRAP(TxD)
|
|
||||||
~~~ | + | |
|
|
||||||
5V <--BATT + GND | | HHKB
|
|
||||||
R1 | | ~~~~
|
|
||||||
D- <----+-----+--R2-----|INT1 PB2-4|------->ROW(6-8)
|
|
||||||
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
|
||||||
Z1 Z2 | PC3|------->ENABLE(12)
|
|
||||||
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
|
||||||
| PB1|------->PREV(5)
|
|
||||||
| |
|
|
||||||
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
|
||||||
X1 | TXD|<-------Debug Console
|
|
||||||
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
|
||||||
+---------------+
|
|
||||||
|
|
||||||
R1: 1.5K Ohm
|
|
||||||
R2,R3: 68 Ohm
|
|
||||||
Z1,Z2: Zener 3.6V
|
|
||||||
C1,C2: 22pF
|
|
||||||
C3: 0.1uF
|
|
||||||
X1: Crystal 12MHz
|
|
||||||
SW: Push Switch(Optional)
|
|
||||||
BATT: Li-Po Battery, Battery Charger and Voltage Regulator(5V and 3.3V).
|
|
||||||
|
|
||||||
|
|
||||||
EOF
|
|
||||||
@ -0,0 +1,135 @@
|
|||||||
|
Alternative Controller for HHKB Pro
|
||||||
|
===================================
|
||||||
|
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
|
||||||
|
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
|
||||||
|
controller with programmable one. For this purpose I used PJRC [Teensy++][Teensy] as alternative controller.
|
||||||
|
|
||||||
|
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
|
||||||
|
[Teensy]: http://www.pjrc.com/teensy/
|
||||||
|
|
||||||
|
|
||||||
|
My keyboard firmware source tree is here: http://github.com/tmk/tmk_keyboard
|
||||||
|
See directory keyboard/hhkb to build firmware for HHKB.
|
||||||
|
|
||||||
|
|
||||||
|
##Features
|
||||||
|
* Customizable keymap
|
||||||
|
* More keymap layers(more Fn keys)
|
||||||
|
* Mouse keys
|
||||||
|
* USB NKRO
|
||||||
|
|
||||||
|
###Pros
|
||||||
|
* Without PCB trace cutting, case mod or any destructives
|
||||||
|
* Can keep original controller intact
|
||||||
|
* Can change all HHKB behaviour as you like
|
||||||
|
|
||||||
|
###Cons
|
||||||
|
* Void your warranty
|
||||||
|
* Lose USB hub function in case of Pro2
|
||||||
|
|
||||||
|
##DISCLAIMER
|
||||||
|
I'm not a professional of electronics or MCU programming. This may damage your HHKB.
|
||||||
|
And my English writing is poor, I'm not sure I can convey my notions accurately.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
##Build Firmware
|
||||||
|
You can choose some combination of MCU and USB protocol stack.
|
||||||
|
|
||||||
|
### Teensy++(AVR USB family) with [LUFA]
|
||||||
|
0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
|
||||||
|
|
||||||
|
1. Edit **keymap.c** to use your favoirte keymap.
|
||||||
|
|
||||||
|
2. Edit **Makefile** if you want to use other `MCU` than Teensy++ 2.0.
|
||||||
|
|
||||||
|
3. Build firmware binary file:
|
||||||
|
`$ make -f Makefile.lufa`
|
||||||
|
|
||||||
|
4. Program MCU with PJRC [Teensy Loader] tool. If you install command line version of the loader just run:
|
||||||
|
`$ make -f Makefile.lufa teensy`
|
||||||
|
|
||||||
|
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
|
||||||
|
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
|
||||||
|
|
||||||
|
|
||||||
|
###AVR Mega with [V-USB]
|
||||||
|
Follow below if you want to use AVR with V-USB as .
|
||||||
|
|
||||||
|
0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
|
||||||
|
|
||||||
|
1. Edit **keymap.c** to use your favoirte keymap.
|
||||||
|
|
||||||
|
2. Edit **usbconfig.h** to configure V-USB options.
|
||||||
|
|
||||||
|
3. Edit **Makefile.vusb** to define `MCU` and `F_CPU`.
|
||||||
|
|
||||||
|
4. Build firmware binary file:
|
||||||
|
`$ make -f Makefile.vusb`
|
||||||
|
|
||||||
|
5. Program MCU with AVR programmer like AVRISPmkII. If you already have [USBaspLoader] on MCU just run:
|
||||||
|
`$ make -f Makefile.vusb program`
|
||||||
|
|
||||||
|
[V-USB]: http://www.obdev.at/products/vusb/index.html
|
||||||
|
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
|
||||||
|
|
||||||
|
|
||||||
|
###How to Customize Keymap
|
||||||
|
Later...
|
||||||
|
See **keymap.c**.
|
||||||
|
|
||||||
|
|
||||||
|
##Hardware
|
||||||
|
|
||||||
|
###Teensy++ installation
|
||||||
|
Angled USB mini B adapter is used to install Teensy++ laterally.
|
||||||
|
![doc/HHKB_img/teensy_install.jpg]
|
||||||
|
|
||||||
|
Bread baord wires are used to connect Teensy++.
|
||||||
|
![doc/HHKB_img/teensy_wiring.jpg]
|
||||||
|
![doc/HHKB_img/connector_contact.jpg]
|
||||||
|
|
||||||
|
|
||||||
|
###PJRC Teensy++ 2.0 connection
|
||||||
|
+---------------+
|
||||||
|
| Teensy++ |
|
||||||
|
| |
|
||||||
|
| | HHKB
|
||||||
|
| | ~~~~
|
||||||
|
| PB0-2|------->ROW(6-8)
|
||||||
|
| PB3-5|------->COL(9-11)
|
||||||
|
| PB6|------->ENABLE(12)
|
||||||
|
| PE6|<-------KEY(4)
|
||||||
|
| PE7|------->PREV(5)
|
||||||
|
| |
|
||||||
|
| |
|
||||||
|
| |
|
||||||
|
+---------------+
|
||||||
|
|
||||||
|
|
||||||
|
###V-USB circuit
|
||||||
|
+---+ +---------------+
|
||||||
|
USB GND | | ATmega168 |
|
||||||
|
~~~ C3 | |
|
||||||
|
5V <-------+--------+---|Vcc,AVCC | HHKB
|
||||||
|
R1 | | ~~~~
|
||||||
|
D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8)
|
||||||
|
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
||||||
|
Z1 Z2 | PC3|------->ENABLE(12)
|
||||||
|
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
||||||
|
| PB1|------->PREV(5)
|
||||||
|
| |
|
||||||
|
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
||||||
|
X1 | TXD|<-------Debug Console
|
||||||
|
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
||||||
|
+---------------+
|
||||||
|
R1: 1.5K Ohm
|
||||||
|
R2,R3: 68 Ohm
|
||||||
|
Z1,Z2: Zener 3.6V
|
||||||
|
C1,C2: 22pF
|
||||||
|
C3: 0.1uF
|
||||||
|
X1: Crystal 20MHz(16MHz/12MHz)
|
||||||
|
SW: Push Switch(Optional for bootloader)
|
||||||
@ -0,0 +1,32 @@
|
|||||||
|
|
||||||
|
iWRAP
|
||||||
|
-----
|
||||||
|
+---------------+ WT12
|
||||||
|
5V | ATmega168 | 5V/3.3V~~~~
|
||||||
|
+-----+---|Vcc,AVCC PC4|---/--->iWRAP(RxD)
|
||||||
|
USB | C3 | PC5|<--/----iWRAP(TxD)
|
||||||
|
~~~ | + | |
|
||||||
|
5V <--BATT + GND | | HHKB
|
||||||
|
R1 | | ~~~~
|
||||||
|
D- <----+-----+--R2-----|INT1 PB2-4|------->ROW(6-8)
|
||||||
|
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
||||||
|
Z1 Z2 | PC3|------->ENABLE(12)
|
||||||
|
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
||||||
|
| PB1|------->PREV(5)
|
||||||
|
| |
|
||||||
|
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
||||||
|
X1 | TXD|<-------Debug Console
|
||||||
|
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
||||||
|
+---------------+
|
||||||
|
|
||||||
|
R1: 1.5K Ohm
|
||||||
|
R2,R3: 68 Ohm
|
||||||
|
Z1,Z2: Zener 3.6V
|
||||||
|
C1,C2: 22pF
|
||||||
|
C3: 0.1uF
|
||||||
|
X1: Crystal 12MHz
|
||||||
|
SW: Push Switch(Optional)
|
||||||
|
BATT: Li-Po Battery, Battery Charger and Voltage Regulator(5V and 3.3V).
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
Loading…
Reference in new issue