Fix reversed descriptions for the AVR8 USB pad regulator enable/disable masks (thanks to Omar).

LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h

@@ -119,14 +119,15 @@
 			/** \name USB Controller Option Masks */
 			//@{
 			/** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
-			 *  regulator should be enabled to regulate the data pin voltages to within the USB standard.
+			 *  regulator should be disabled and the AVR's VCC level used for the data pads.
 			 *
 			 *  \note See USB AVR data sheet for more information on the internal pad regulator.
 			 */
 			#define USB_OPT_REG_DISABLED               (1 << 1)
 
 			/** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
-			 *  regulator should be disabled and the AVR's VCC level used for the data pads.
+			 *  regulator should be enabled to regulate the data pin voltages from the VBUS level down to a level within
+			 *  the range allowable by the USB standard.
 			 *
 			 *  \note See USB AVR data sheet for more information on the internal pad regulator.
 			 */

LUFA/ManPages/ChangeLog.txt

@@ -18,7 +18,7 @@
   *   - Added new Endpoint_Null_Stream() and Pipe_Null_Stream() functions
   *   - Added new ADC_GET_CHANNEL_MASK() convenience macro
   *   - Added new HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors
-  *   - Added new HID_DESCRIPTOR_MOUSE, HID_DESCRIPTOR_KEYBOARD, HID_DESCRIPTOR_JOYSTICK and HID_DESCRIPTOR_VENDOR macros
+  *   - Added new HID_DESCRIPTOR_MOUSE(), HID_DESCRIPTOR_KEYBOARD(), HID_DESCRIPTOR_JOYSTICK() and HID_DESCRIPTOR_VENDOR() macros
   *     for easy automatic creation of basic USB HID device reports
   *   - Added new MAX() and MIN() convenience macros
   *   - Added new Serial_SendData() function to the Serial driver

LUFA/ManPages/FutureChanges.txt

@@ -18,6 +18,7 @@
   *      -# Change makefiles to allow for absolute LUFA location to be used
   *      -# Re-add interrupt Pipe/Endpoint support
   *      -# Add makefile includes to reduce boilerplate in user makefiles
+  *      -# Update stream APIs to use DMA transfers on supported architectures
   *  - Documentation/Support
   *      -# Add detailed overviews of how each demo works
   *      -# Add board overviews