forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add Makefile.lufa to keyboard/hhkb and hbkb.

Browse Source
pull/12/head
tmk 13 years ago
parent f427529a30
commit 2c5d3ac76f
13 changed files with 322 additions and 71 deletions
Show Stats Download Patch File Download Diff File

1
common/bootloader.c
Unescape View File

@ -9,6 +9,7 @@
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html * http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html
*/ */
// TODO: support usbasp
/* Boot Section Size in bytes /* Boot Section Size in bytes
* Teensy halfKay 512 * Teensy halfKay 512
* Atmel DFU loader 4096 * Atmel DFU loader 4096

56
keyboard/hbkb/Makefile
Unescape View File

@ -1,56 +0,0 @@
# Target file name (without extension).
TARGET = hbk
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
SRC = main.c \
keymap.c \
matrix.c \
led.c
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
EXTRAKEY_ENABLE = yes # Audio control and System control
#NKRO_ENABLE = yes # USB Nkey Rollover
#---------------- Programming Options --------------------------
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

1
keyboard/hbkb/Makefile
Unescape View File

@ -0,0 +1 @@
Makefile.lufa

119
keyboard/hbkb/Makefile.lufa
Unescape View File

@ -0,0 +1,119 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = hbkb_lufa
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# List C source files here. (C dependencies are automatically generated.)
SRC += keymap.c \
matrix.c \
led.c
CONFIG_H = config.h
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
#NKRO_ENABLE = yes # USB Nkey Rollover
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOT_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

56
keyboard/hbkb/Makefile.pjrc
Unescape View File

@ -0,0 +1,56 @@
# Target file name (without extension).
TARGET = hbkb
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
SRC = main.c \
keymap.c \
matrix.c \
led.c
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
EXTRAKEY_ENABLE = yes # Audio control and System control
#NKRO_ENABLE = yes # USB Nkey Rollover
#---------------- Programming Options --------------------------
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

3
keyboard/hbkb/config.h
Unescape View File

@ -24,7 +24,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED #define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xBB00 #define PRODUCT_ID 0xBB00
#define MANUFACTURER t.m.k. #define MANUFACTURER t.m.k.
#define DEVICE_VER 0x0100
#define PRODUCT Happy Buckling Keyboard #define PRODUCT Happy Buckling Keyboard
#define DESCRIPTION mod version of IBM Model M keyboard #define DESCRIPTION mod version of IBM Model M keyboard

119
keyboard/hhkb/Makefile.lufa
Unescape View File

@ -0,0 +1,119 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = hhkb_lufa
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# List C source files here. (C dependencies are automatically generated.)
SRC += keymap.c \
matrix.c \
led.c
CONFIG_H = config.h
# MCU name
MCU = at90usb1286
#MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
#NKRO_ENABLE = yes # USB Nkey Rollover
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
#OPT_DEFS += -DBOOT_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

7
keyboard/hhkb/Makefile.pjrc
Unescape View File

@ -13,12 +13,11 @@ TOP_DIR = ../..
TARGET_DIR = . TARGET_DIR = .
# keyboard dependent files # keyboard dependent files
SRC = main.c \ SRC = keymap.c \
keymap.c \
matrix.c \ matrix.c \
led.c led.c
CONFIG_H = config_pjrc.h CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using # MCU name, you MUST set this to match the board you are using
@ -53,8 +52,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path # Search Path
VPATH = $(TARGET_DIR) VPATH = $(TARGET_DIR)
VPATH = $(TOP_DIR)
include $(TOP_DIR)/protocol/pjrc.mk include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk include $(TOP_DIR)/rules.mk

5
keyboard/hhkb/config_pjrc.h → keyboard/hhkb/config.h
Unescape View File

@ -21,11 +21,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* controller configuration */ /* controller configuration */
#include "controller_teensy.h" #include "controller_teensy.h"
#define VENDOR_ID 0xFEED #define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xCAFE #define PRODUCT_ID 0xCAFF
#define DEVICE_VER 0x0101 #define DEVICE_VER 0x0101
#define MANUFACTURER t.m.k. #define MANUFACTURER t.m.k.
#define PRODUCT HHKB mod #define PRODUCT HHKB mod
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod #define DESCRIPTION t.m.k. keyboard firmware for HHKB mod

10
keyboard/hhkb/matrix.c
Unescape View File

@ -68,8 +68,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
// key: on: 0/off: 1 // key: on: 0/off: 1
// prev: unknown: output previous key state(negated)? // prev: unknown: output previous key state(negated)?
#ifdef HOST_PJRC #if defined(__AVR_AT90USB1286__)
// Ports for Teensy // Ports for Teensy++
// row: PB0-2 // row: PB0-2
// col: PB3-5,6 // col: PB3-5,6
// key: PE6(pull-uped) // key: PE6(pull-uped)
@ -90,7 +90,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) #define KEY_PREV_OFF() (PORTE &= ~(1<<7))
#define KEY_POWER_ON() #define KEY_POWER_ON()
#define KEY_POWER_OFF() #define KEY_POWER_OFF()
#else
#elif defined(__AVR_ATmega328P__)
// Ports for V-USB // Ports for V-USB
// key: PB0(pull-uped) // key: PB0(pull-uped)
// prev: PB1 // prev: PB1
@ -126,6 +127,9 @@ static bool matrix_has_ghost_in_row(uint8_t row);
DDRC &= ~0x0F; \ DDRC &= ~0x0F; \
PORTC &= ~0x0F; \ PORTC &= ~0x0F; \
} while (0) } while (0)
#else
# error "define code for matrix scan"
#endif #endif

4
keyboard/macway/Makefile.lufa
Unescape View File

@ -107,9 +107,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control
# Teensy halfKay 512 # Teensy halfKay 512
# Atmel DFU loader 4096 # Atmel DFU loader 4096
# LUFA bootloader 4096 # LUFA bootloader 4096
#ifndef BOOT_SIZE #OPT_DEFS += -DBOOT_SIZE=4096
#define BOOT_SIZE 512
#endif
# Search Path # Search Path

3
keyboard/macway/Makefile.pjrc
Unescape View File

@ -48,8 +48,7 @@ TOP_DIR = ../..
TARGET_DIR = . TARGET_DIR = .
# keyboard dependent files # keyboard dependent files
SRC = protocol/pjrc/main.c \ SRC = keymap.c \
keymap.c \
matrix.c \ matrix.c \
led.c led.c

3
protocol/pjrc.mk
Unescape View File

@ -2,7 +2,8 @@ PJRC_DIR = protocol/pjrc
OPT_DEFS += -DHOST_PJRC OPT_DEFS += -DHOST_PJRC
SRC += $(PJRC_DIR)/pjrc.c \ SRC += $(PJRC_DIR)/main.c \
$(PJRC_DIR)/pjrc.c \
$(PJRC_DIR)/usb_keyboard.c \ $(PJRC_DIR)/usb_keyboard.c \
$(PJRC_DIR)/usb_debug.c \ $(PJRC_DIR)/usb_debug.c \
$(PJRC_DIR)/usb.c $(PJRC_DIR)/usb.c

6
rules.mk
Unescape View File

@ -416,6 +416,10 @@ dfu: $(TARGET).hex
dfu-programmer $(MCU) erase dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash $(TARGET).hex dfu-programmer $(MCU) flash $(TARGET).hex
dfu-programmer $(MCU) reset dfu-programmer $(MCU) reset
dfu-start:
dfu-programmer $(MCU) reset
dfu-programmer $(MCU) start
flip-ee: $(TARGET).hex $(TARGET).eep flip-ee: $(TARGET).hex $(TARGET).eep
$(COPY) $(TARGET).eep $(TARGET)eep.hex $(COPY) $(TARGET).eep $(TARGET)eep.hex
@ -599,4 +603,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \ .PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \ build elf hex eep lss sym coff extcoff \
clean clean_list debug gdb-config show_path \ clean clean_list debug gdb-config show_path \
program teensy dfu flip dfu-ee flip-ee program teensy dfu flip dfu-ee flip-ee dfu-start

Write Preview
Loading…
Cancel
Save