Merge branch 'hid_liber'

pull/12/head
tmk 12 years ago
commit 2ea4ee0ce6

@ -19,6 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define HOST_H #define HOST_H
#include <stdint.h> #include <stdint.h>
#include <stdbool.h>
#include "report.h" #include "report.h"
#include "host_driver.h" #include "host_driver.h"

@ -0,0 +1,120 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = hid_liber_lufa
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# List C source files here. (C dependencies are automatically generated.)
SRC += keymap.c \
matrix.c \
led.c
CONFIG_H = config.h
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Build Options
# comment out to disable the options.
#
#MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOT_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

@ -0,0 +1,90 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = hid_liber_pjrc
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
SRC = keymap.c \
matrix.c \
led.c
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
# Build Options
# comment out to disable the options.
#
#MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
EXTRAKEY_ENABLE = yes # Audio control and System control
NKRO_ENABLE = yes # USB Nkey Rollover
CONSOLE_ENABLE = yes # Console for debug
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

@ -0,0 +1,56 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xB919
#define DEVICE_VER 0x0001
#define MANUFACTURER t.m.k.
#define PRODUCT HID Liberation
/* message strings */
#define DESCRIPTION t.m.k. keyboard firmware for HID Liberation
/* matrix size */
#define MATRIX_ROWS 18
#define MATRIX_COLS 8
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if need no debouncing */
#define DEBOUNCE 7
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
// TODO: configurable
#define DEBUG_LED 0
#define DEBUG_LED_CONFIG
#define DEBUG_LED_ON
#define DEBUG_LED_OFF
#endif

@ -0,0 +1,184 @@
/*
Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* Keymap for HID Liberator controller
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
#include "keycode.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "keymap.h"
// Convert physical keyboard layout to matrix array.
// This is a macro to define keymap easily in keyboard layout form.
#define KEYMAP( \
KG1, KH7, KJ7, KJ6, KJ1, KO5, KL1, KA6, KA7, KD7, KD5, KD1, KD2, KB5, KB3, KO3, \
KG7, KG5, KH5, KJ5, KI5, KI7, KK7, KK5, KL5, KA5, KC5, KC7, KL7, KD6, KQ7, KN7, KM7, \
KG6, KG3, KH3, KJ3, KI3, KI6, KK6, KK3, KL3, KA3, KC3, KC6, KL6, KD4, KP7, KN5, KM5, \
KH6, KG4, KH4, KJ4, KI4, KI1, KK1, KK4, KL4, KA4, KC4, KC1, KD0, \
KF6, KQ0, KG0, KH0, KJ0, KI0, KI2, KK2, KK0, KL0, KA0, KC2, KF4, KN1, \
KO7, KE6, KB1, KP1, KB2, KR4, KA2, KO0, KN2, KP2, KQ2 \
) { \
/* 0 1 2 3 4 5 6 7 */ \
/* A */ { KC_##KA0, KC_NO , KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7 }, \
/* B */ { KC_NO , KC_##KB1, KC_##KB2, KC_##KB3, KC_NO , KC_##KB5, KC_NO , KC_NO }, \
/* C */ { KC_NO , KC_##KC1, KC_##KC2, KC_##KC3, KC_##KC4, KC_##KC5, KC_##KC6, KC_##KC7 }, \
/* D */ { KC_##KD0, KC_##KD1, KC_##KD2, KC_NO , KC_##KD4, KC_##KD5, KC_##KD6, KC_##KD7 }, \
/* E */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_##KE6, KC_NO }, \
/* F */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_##KF4, KC_NO , KC_##KF6, KC_NO }, \
/* G */ { KC_##KG0, KC_##KG1, KC_NO , KC_##KG3, KC_##KG4, KC_##KG5, KC_##KG6, KC_##KG7 }, \
/* H */ { KC_##KH0, KC_NO , KC_NO , KC_##KH3, KC_##KH4, KC_##KH5, KC_##KH6, KC_##KH7 }, \
/* I */ { KC_##KI0, KC_##KI1, KC_##KI2, KC_##KI3, KC_##KI4, KC_##KI5, KC_##KI6, KC_##KI7 }, \
/* J */ { KC_##KJ0, KC_##KJ1, KC_NO , KC_##KJ3, KC_##KJ4, KC_##KJ5, KC_##KJ6, KC_##KJ7 }, \
/* K */ { KC_##KK0, KC_##KK1, KC_##KK2, KC_##KK3, KC_##KK4, KC_##KK5, KC_##KK6, KC_##KK7 }, \
/* L */ { KC_##KL0, KC_##KL1, KC_NO , KC_##KL3, KC_##KL4, KC_##KL5, KC_##KL6, KC_##KL7 }, \
/* M */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_##KM5, KC_NO , KC_##KM7 }, \
/* N */ { KC_NO , KC_##KN1, KC_##KN2, KC_NO , KC_NO , KC_##KN5, KC_NO , KC_##KN7 }, \
/* O */ { KC_##KO0, KC_NO , KC_NO , KC_##KO3, KC_NO , KC_##KO5, KC_NO , KC_##KO7 }, \
/* P */ { KC_NO , KC_##KP1, KC_##KP2, KC_NO , KC_NO , KC_NO , KC_NO , KC_##KP7 }, \
/* Q */ { KC_NO , KC_NO , KC_##KQ2, KC_NO , KC_NO , KC_NO , KC_NO , KC_##KQ7 }, \
/* R */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_##KR4, KC_NO , KC_NO , KC_NO } \
}
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
static const uint8_t PROGMEM fn_layer[] = {
0, // Fn0
1, // Fn1
2, // Fn2
3, // Fn3
4, // Fn4
5, // Fn5
6, // Fn6
7 // Fn7
};
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
// See layer.c for details.
static const uint8_t PROGMEM fn_keycode[] = {
KC_NO, // Fn0
KC_NO, // Fn1
KC_NO, // Fn2
KC_NO, // Fn3
KC_NO, // Fn4
KC_NO, // Fn5
KC_NO, // Fn6
KC_NO // Fn7
};
/*
* Tenkeyless keyboard default layout, ISO & ANSI (ISO is next to right shift,
* not present on ANSI, other ISO switches move from ANSI layout but are same
* switch
*
* ,---. ,---------------. ,---------------. ,---------------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
* `---' `---------------' `---------------' `---------------' `-----------'
* ,-----------------------------------------------------------. ,-----------.
* |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU|
* |-----------------------------------------------------------| |-----------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD|
* |-----------------------------------------------------------| `-----------'
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
* |-----------------------------------------------------------| ,---.
* |Shft|ISO| Z| X| C| V| B| N| M| ,| .| /|Shift | |Up |
* |-----------------------------------------------------------| ,-----------.
* |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
* `-----------------------------------------------------------' `-----------'
*/
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default Layer
*
* ANSI:
*
* ,---. ,---------------. ,---------------. ,---------------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
* `---' `---------------' `---------------' `---------------' `-----------'
* ,-----------------------------------------------------------. ,-----------.
* |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU|
* |-----------------------------------------------------------| |-----------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD|
* |-----------------------------------------------------------| `-----------'
* |FN1 | A| S| D| F| G| H| J| K| L| ;| '|Return |
* |-----------------------------------------------------------| ,---.
* |Shft | Z| X| C| V| B| N| M| ,| .| /|Shift | |Up |
* |-----------------------------------------------------------| ,-----------.
* |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
* `-----------------------------------------------------------' `-----------'
*/
KEYMAP(\
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, BRK, \
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, INS, HOME, PGUP, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, END, PGDN, \
FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \
LSFT, 0, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, \
LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL, LEFT, DOWN, RGHT),
/*
* ,---. ,---------------. ,---------------. ,---------------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Slp|
* `---' `---------------' `---------------' `---------------' `-----------'
* ,-----------------------------------------------------------. ,-----------.
* |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9|Mut|V- |V+ |Backsp | |Ins|Hom|PgU|
* |-----------------------------------------------------------| |-----------|
* |Tab | Q| W| E| R| T| Y| U| I|MSt|Ply|Prv|Nxt|Media| |Del|End|PgD|
* |-----------------------------------------------------------| `-----------'
* |FN1 | A| S| D| F| G| H| J| K| L| ;| '|Return |
* |-----------------------------------------------------------| ,---.
* |Shft | Z| X|Clc| V| B| N| M| ,| .| /|Caps | |Up |
* |-----------------------------------------------------------| ,-----------.
* |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
* `-----------------------------------------------------------' `-----------'
*/
KEYMAP(\
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, SLEP, \
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9,MUTE, VOLD, VOLU, BSPC, INS, HOME, PGUP, \
TAB, Q, W, E, R, T, Y, U, I,MSTP,MPLY, MPRV, MNXT, MSEL, DEL, END, PGDN, \
FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \
LSFT, NO, Z, X,CALC, V, B, N, M, COMM, DOT, SLSH, CAPS, UP, \
LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL, LEFT, DOWN, RGHT),
};
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
{
return KEYCODE(layer, row, col);
}
uint8_t keymap_fn_layer(uint8_t index)
{
return pgm_read_byte(&fn_layer[index]);
}
uint8_t keymap_fn_keycode(uint8_t index)
{
return pgm_read_byte(&fn_keycode[index]);
}

@ -0,0 +1,34 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK))
PORTB &= ~(1<<5);
else
PORTB |= (1<<5);
if (usb_led & (1<<USB_LED_SCROLL_LOCK))
PORTB &= ~(1<<6);
else
PORTB |= (1<<6);
}

@ -0,0 +1,233 @@
/* Copyright 2012 Jun Wako <wakojun@gmail.com>
*
* This is heavily based on hid_liber/board.{c|h}.
* https://github.com/BathroomEpiphanies/AVR-Keyboard
*
* Copyright (c) 2012 Fredrik Atmer, Bathroom Epiphanies Inc
* http://bathroomepiphanies.com
*
* As for liscensing consult with the original files or its author.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#ifndef DEBOUNCE
# define DEBOUNCE 0
#endif
static uint8_t debouncing = DEBOUNCE;
// bit array of key state(1:on, 0:off)
static matrix_row_t *matrix;
static matrix_row_t *matrix_debounced;
static matrix_row_t _matrix0[MATRIX_ROWS];
static matrix_row_t _matrix1[MATRIX_ROWS];
#define _DDRA (uint8_t *const)&DDRA
#define _DDRB (uint8_t *const)&DDRB
#define _DDRC (uint8_t *const)&DDRC
#define _DDRD (uint8_t *const)&DDRD
#define _DDRE (uint8_t *const)&DDRE
#define _DDRF (uint8_t *const)&DDRF
#define _PINA (uint8_t *const)&PINA
#define _PINB (uint8_t *const)&PINB
#define _PINC (uint8_t *const)&PINC
#define _PIND (uint8_t *const)&PIND
#define _PINE (uint8_t *const)&PINE
#define _PINF (uint8_t *const)&PINF
#define _PORTA (uint8_t *const)&PORTA
#define _PORTB (uint8_t *const)&PORTB
#define _PORTC (uint8_t *const)&PORTC
#define _PORTD (uint8_t *const)&PORTD
#define _PORTE (uint8_t *const)&PORTE
#define _PORTF (uint8_t *const)&PORTF
#define _BIT0 0x01
#define _BIT1 0x02
#define _BIT2 0x04
#define _BIT3 0x08
#define _BIT4 0x10
#define _BIT5 0x20
#define _BIT6 0x40
#define _BIT7 0x80
/* Specifies the ports and pin numbers for the rows */
static
uint8_t *const row_ddr[MATRIX_ROWS] = {
_DDRB, _DDRB,
_DDRC, _DDRC,
_DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD,
_DDRF, _DDRF, _DDRF, _DDRF, _DDRF, _DDRF};
static
uint8_t *const row_port[MATRIX_ROWS] = {
_PORTB, _PORTB,
_PORTC, _PORTC,
_PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD,
_PORTF, _PORTF, _PORTF, _PORTF, _PORTF, _PORTF};
static
uint8_t *const row_pin[MATRIX_ROWS] = {
_PINB, _PINB,
_PINC, _PINC,
_PIND, _PIND, _PIND, _PIND, _PIND, _PIND, _PIND, _PIND,
_PINF, _PINF, _PINF, _PINF, _PINF, _PINF};
static
const uint8_t row_bit[MATRIX_ROWS] = {
_BIT4, _BIT7,
_BIT6, _BIT7,
_BIT0, _BIT1, _BIT2, _BIT3, _BIT4, _BIT5, _BIT6, _BIT7,
_BIT0, _BIT1, _BIT4, _BIT5, _BIT6, _BIT7};
static
const uint8_t mask = 0x0E;
/* Specifies the ports and pin numbers for the columns */
static
const uint8_t col_bit[MATRIX_COLS] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0E};
static
inline void pull_column(int col) {
PORTB = col_bit[col] | (PORTB & ~mask);
}
static
inline void release_column(int col) {
}
/* PORTB is set as input with pull-up resistors
PORTC,D,E,F are set to high output */
static
void setup_io_pins(void) {
uint8_t row;
DDRB |= 0x0E;
PORTB &= ~0x0E;
for(row = 0; row < MATRIX_ROWS; row++) {
*row_ddr[row] &= ~row_bit[row];
*row_port[row] &= ~row_bit[row];
}
}
static
void setup_leds(void) {
DDRB |= 0x60;
PORTB |= 0x60;
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
// initialize row and col
setup_io_pins();
setup_leds();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
matrix = _matrix0;
matrix_debounced = _matrix1;
}
uint8_t matrix_scan(void)
{
if (!debouncing) {
uint8_t *tmp = matrix_debounced;
matrix_debounced = matrix;
matrix = tmp;
}
for (uint8_t col = 0; col < MATRIX_COLS; col++) { // 0-7
pull_column(col); // output hi on theline
_delay_us(3); // without this wait it won't read stable value.
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { // 0-17
bool prev_bit = matrix[row] & (1<<col);
bool curr_bit = *row_pin[row] & row_bit[row];
if (prev_bit != curr_bit) {
matrix[row] ^= (1<<col);
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); print("\n");
}
debouncing = DEBOUNCE;
}
}
release_column(col);
}
if (debouncing) {
debouncing--;
}
return 1;
}
bool matrix_is_modified(void)
{
// NOTE: no longer used
return true;
}
inline
bool matrix_has_ghost(void)
{
return false;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix_debounced[row] & (1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix_debounced[row];
}
void matrix_print(void)
{
print("\nr/c 01234567\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
for (uint8_t j = 0; j < MATRIX_COLS; j++) {
if (matrix_is_on(i, j))
count++;
}
}
return count;
}

@ -128,7 +128,7 @@ static const uint8_t PROGMEM endpoint_config_table[] = {
// spec and relevant portions of any USB class specifications! // spec and relevant portions of any USB class specifications!
static uint8_t PROGMEM device_descriptor[] = { static const uint8_t PROGMEM device_descriptor[] = {
18, // bLength 18, // bLength
1, // bDescriptorType 1, // bDescriptorType
0x00, 0x02, // bcdUSB 0x00, 0x02, // bcdUSB
@ -146,7 +146,7 @@ static uint8_t PROGMEM device_descriptor[] = {
}; };
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60 // Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
static uint8_t PROGMEM keyboard_hid_report_desc[] = { static const uint8_t PROGMEM keyboard_hid_report_desc[] = {
0x05, 0x01, // Usage Page (Generic Desktop), 0x05, 0x01, // Usage Page (Generic Desktop),
0x09, 0x06, // Usage (Keyboard), 0x09, 0x06, // Usage (Keyboard),
0xA1, 0x01, // Collection (Application), 0xA1, 0x01, // Collection (Application),
@ -181,7 +181,7 @@ static uint8_t PROGMEM keyboard_hid_report_desc[] = {
0xc0 // End Collection 0xc0 // End Collection
}; };
#ifdef NKRO_ENABLE #ifdef NKRO_ENABLE
static uint8_t PROGMEM keyboard2_hid_report_desc[] = { static const uint8_t PROGMEM keyboard2_hid_report_desc[] = {
0x05, 0x01, // Usage Page (Generic Desktop), 0x05, 0x01, // Usage Page (Generic Desktop),
0x09, 0x06, // Usage (Keyboard), 0x09, 0x06, // Usage (Keyboard),
0xA1, 0x01, // Collection (Application), 0xA1, 0x01, // Collection (Application),
@ -222,7 +222,7 @@ static uint8_t PROGMEM keyboard2_hid_report_desc[] = {
// http://www.microchip.com/forums/tm.aspx?high=&m=391435&mpage=1#391521 // http://www.microchip.com/forums/tm.aspx?high=&m=391435&mpage=1#391521
// http://www.keil.com/forum/15671/ // http://www.keil.com/forum/15671/
// http://www.microsoft.com/whdc/device/input/wheel.mspx // http://www.microsoft.com/whdc/device/input/wheel.mspx
static uint8_t PROGMEM mouse_hid_report_desc[] = { static const uint8_t PROGMEM mouse_hid_report_desc[] = {
/* mouse */ /* mouse */
0x05, 0x01, // USAGE_PAGE (Generic Desktop) 0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x02, // USAGE (Mouse) 0x09, 0x02, // USAGE (Mouse)
@ -273,7 +273,7 @@ static uint8_t PROGMEM mouse_hid_report_desc[] = {
}; };
#endif #endif
static uint8_t PROGMEM debug_hid_report_desc[] = { static const uint8_t PROGMEM debug_hid_report_desc[] = {
0x06, 0x31, 0xFF, // Usage Page 0xFF31 (vendor defined) 0x06, 0x31, 0xFF, // Usage Page 0xFF31 (vendor defined)
0x09, 0x74, // Usage 0x74 0x09, 0x74, // Usage 0x74
0xA1, 0x53, // Collection 0x53 0xA1, 0x53, // Collection 0x53
@ -289,7 +289,7 @@ static uint8_t PROGMEM debug_hid_report_desc[] = {
#ifdef EXTRAKEY_ENABLE #ifdef EXTRAKEY_ENABLE
// audio controls & system controls // audio controls & system controls
// http://www.microsoft.com/whdc/archive/w2kbd.mspx // http://www.microsoft.com/whdc/archive/w2kbd.mspx
static uint8_t PROGMEM extra_hid_report_desc[] = { static const uint8_t PROGMEM extra_hid_report_desc[] = {
/* system control */ /* system control */
0x05, 0x01, // USAGE_PAGE (Generic Desktop) 0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x80, // USAGE (System Control) 0x09, 0x80, // USAGE (System Control)
@ -348,7 +348,7 @@ static uint8_t PROGMEM extra_hid_report_desc[] = {
#define NUM_INTERFACES (KBD2_HID_DESC_NUM + 1) #define NUM_INTERFACES (KBD2_HID_DESC_NUM + 1)
#define CONFIG1_DESC_SIZE (9+(9+9+7)*NUM_INTERFACES) #define CONFIG1_DESC_SIZE (9+(9+9+7)*NUM_INTERFACES)
static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = { static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10 // configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
9, // bLength; 9, // bLength;
2, // bDescriptorType; 2, // bDescriptorType;
@ -515,17 +515,17 @@ struct usb_string_descriptor_struct {
uint8_t bDescriptorType; uint8_t bDescriptorType;
int16_t wString[]; int16_t wString[];
}; };
static struct usb_string_descriptor_struct PROGMEM string0 = { static const struct usb_string_descriptor_struct PROGMEM string0 = {
4, 4,
3, 3,
{0x0409} {0x0409}
}; };
static struct usb_string_descriptor_struct PROGMEM string1 = { static const struct usb_string_descriptor_struct PROGMEM string1 = {
sizeof(STR_MANUFACTURER), sizeof(STR_MANUFACTURER),
3, 3,
STR_MANUFACTURER STR_MANUFACTURER
}; };
static struct usb_string_descriptor_struct PROGMEM string2 = { static const struct usb_string_descriptor_struct PROGMEM string2 = {
sizeof(STR_PRODUCT), sizeof(STR_PRODUCT),
3, 3,
STR_PRODUCT STR_PRODUCT
@ -533,7 +533,7 @@ static struct usb_string_descriptor_struct PROGMEM string2 = {
// This table defines which descriptor data is sent for each specific // This table defines which descriptor data is sent for each specific
// request from the host (in wValue and wIndex). // request from the host (in wValue and wIndex).
static struct descriptor_list_struct { static const struct descriptor_list_struct {
uint16_t wValue; // descriptor type uint16_t wValue; // descriptor type
uint16_t wIndex; uint16_t wIndex;
const uint8_t *addr; const uint8_t *addr;

Loading…
Cancel
Save