Xyverz
8 years ago
commit
303bc6999e
@ -0,0 +1,72 @@
|
||||
#include "atomic.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* QWERTY - MIT ENHANCED / GRID COMPATIBLE
|
||||
* .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
|
||||
* | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
|
||||
* | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
|
||||
* | LCTRL1 | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
|
||||
* | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN |
|
||||
* |--------+--------+--------+--------+--------+- 6.25u ---------+--------+--------+--------+--------+-----------------+--------+--------|
|
||||
* | BRITE | LALT | FN | XXXXXX . SPACE | RCTRL | RALT | FN | LEFT | DOWN | RIGHT |
|
||||
* '--------------------------------------------------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[0] = { /* QWERTY */
|
||||
{ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC },
|
||||
{ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL },
|
||||
{ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP },
|
||||
{ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN },
|
||||
{ M(0), KC_ALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RCTL, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT },
|
||||
},
|
||||
|
||||
|
||||
/* FUNCTION
|
||||
* .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
|
||||
* | GRV | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
|
||||
* | SCR LK | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | PAUSE | PR SCR |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
|
||||
* | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT | VOL+ | VOL- | PLAY | | XXXXXX . | WHEEL+ |
|
||||
* |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
|
||||
* | NUM LK | | | | | | | | INSERT | END1 | HOME | XXXXXX . | MOUS U | WHEEL- |
|
||||
* |--------+--------+--------+--------+--------+- 6.25 ------------+--------+--------+------+--------+-----------------+--------+--------|
|
||||
* | | | FN | XXXXXX . MS BT1 | | | FN | MOUS L | MOUS D | MOUS R |
|
||||
* '--------------------------------------------------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[1] = { /* FUNCTION LAYER*/
|
||||
{ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ },
|
||||
{ KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR },
|
||||
{ KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U },
|
||||
{ KC_NLCK, _______, _______, _______, _______, _______, _______, _______, KC_INSERT, KC_END, KC_HOME, ___T___, ___T___, KC_MS_U, KC_WH_D },
|
||||
{ _______, _______, MO(1), _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, MO(1), KC_MS_L, KC_MS_D, KC_MS_R },
|
||||
},
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[1] = ACTION_LAYER_MOMENTARY(1),
|
||||
[2] = ACTION_LAYER_MOMENTARY(1),
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
backlight_step();
|
||||
#endif
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
@ -0,0 +1,111 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable RGB Underglow
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,88 @@
|
||||
#include "gh60.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define _DEFAULT 0
|
||||
#define _FN 1
|
||||
|
||||
int esc_led = 0;
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define ______ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Qwerty gui/alt/space/alt/gui
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* |LGUI | LAlt | Space | RAlt |RGUI |
|
||||
* `-----------------------------------------------------------------'
|
||||
*/
|
||||
[_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \
|
||||
______, KC_LGUI, KC_LALT, KC_SPC, ______, KC_RALT, KC_RGUI, ______ \
|
||||
),
|
||||
|
||||
/* FN Layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | Led | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | CAPS | | | | | | | | Psc | Slck| Paus| Up | | |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | Prev| Play| Next| | | + | - | End |PgDn| Down| | |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | | | Stop | |
|
||||
* `-----------------------------------------------------------------'
|
||||
*/
|
||||
[_FN] = KEYMAP_HHKB( /* Layer 1 */
|
||||
F(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
|
||||
KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
|
||||
______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \
|
||||
______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \
|
||||
______, ______, ______, ______, ______, KC_MSTP, ______, ______ \
|
||||
)
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
LED_TOGGLE
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(LED_TOGGLE)
|
||||
};
|
||||
|
||||
void esc_led_toggle(void) {
|
||||
if (esc_led == 0){
|
||||
esc_led = 1;
|
||||
gh60_esc_led_on();
|
||||
} else {
|
||||
esc_led = 0;
|
||||
gh60_esc_led_off();
|
||||
}
|
||||
}
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
switch (id) {
|
||||
case LED_TOGGLE:
|
||||
if (record->event.pressed) {
|
||||
esc_led_toggle();
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,167 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER fudanchii
|
||||
#define PRODUCT kbod
|
||||
#define DESCRIPTION Keyboard of Disapproval
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 }
|
||||
#define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
#undef TAPPING_TOGGLE
|
||||
#define TAPPING_TOGGLE 2
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,28 @@
|
||||
#include "kbod.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
@ -0,0 +1,21 @@
|
||||
#ifndef KBOD_H
|
||||
#define KBOD_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07 }, { k08, k09, k0A, k0B, k0C, k0D, KC_NO, KC_NO }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17 }, { k18, k19, k1A, k1B, k1C, k1D, KC_NO, k3B }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27 }, { k28, k29, k2A, k2B, k2C, k38, k39, k3A }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37 }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47 }, \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,21 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,104 @@
|
||||
#include "kbod.h"
|
||||
|
||||
#define _____ KC_TRNS
|
||||
|
||||
#define MODS_PRESSED(btn) (get_mods() & (MOD_BIT(KC_L##btn)|MOD_BIT(KC_R##btn)))
|
||||
|
||||
#define SET_WHETHER(mask, btn1, btn2) \
|
||||
if (record->event.pressed) { \
|
||||
if (mask) { \
|
||||
add_key(btn2); \
|
||||
send_keyboard_report(); \
|
||||
} else { \
|
||||
add_key(btn1); \
|
||||
send_keyboard_report(); \
|
||||
} \
|
||||
} else { \
|
||||
if (mask) { \
|
||||
del_key(btn2); \
|
||||
send_keyboard_report(); \
|
||||
} else { \
|
||||
del_key(btn1); \
|
||||
send_keyboard_report(); \
|
||||
} \
|
||||
} \
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
KEYMAP( /* Base */
|
||||
F(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT,
|
||||
TT(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL
|
||||
),
|
||||
KEYMAP( /* Cursor layer */
|
||||
KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
TT(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT,
|
||||
TT(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, _____,
|
||||
_____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_END, KC_UP,
|
||||
_____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT
|
||||
),
|
||||
KEYMAP( /* Keypad layer */
|
||||
TO(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_P7, KC_P8, KC_P9, KC_P0, KC_PMNS, KC_PPLS, KC_BSPC,
|
||||
_____, _____, _____, _____, _____, _____, _____, KC_P4, KC_P5, KC_P6, _____, _____, _____, _____,
|
||||
_____, _____, _____, _____, _____, _____, _____, KC_P1, KC_P2, KC_P3, _____, _____, _____,
|
||||
_____, _____, _____, _____, _____, _____, _____, KC_P0, KC_PDOT, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2,
|
||||
_____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3
|
||||
),
|
||||
KEYMAP( /* Multimedia layer */
|
||||
TO(0), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____,
|
||||
_____, _____, KC_WAKE, _____, _____, _____, _____, _____, _____, _____, KC_MSTP, KC_MPRV, KC_MNXT, _____,
|
||||
_____, _____, KC_SLEP, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____,
|
||||
_____, _____, KC_PWR, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, KC_MS_BTN2,
|
||||
_____, _____, _____, KC_MPLY, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3
|
||||
),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(0),
|
||||
[1] = ACTION_FUNCTION(1),
|
||||
};
|
||||
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_mask;
|
||||
static uint8_t alt_mask;
|
||||
switch (id) {
|
||||
case 0:
|
||||
shift_esc_mask = MODS_PRESSED(SHIFT);
|
||||
SET_WHETHER(shift_esc_mask, KC_ESC, KC_GRAVE);
|
||||
break;
|
||||
case 1:
|
||||
alt_mask = MODS_PRESSED(ALT);
|
||||
SET_WHETHER(alt_mask, KC_4, KC_F4);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
if (usb_led & _BV(USB_LED_CAPS_LOCK)) {
|
||||
PORTB |= _BV(PB0);
|
||||
} else {
|
||||
PORTB &= ~_BV(PB0);
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
DDRB |= _BV(PB0);
|
||||
DDRC |= _BV(PC7);
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t layer = biton32(layer_state);
|
||||
if (layer) {
|
||||
PORTC |= _BV(PC7);
|
||||
} else {
|
||||
PORTC &= ~_BV(PC7);
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,5 @@
|
||||
# The default keymap for kbod
|
||||
|
||||
This is the default keymap for kbod,
|
||||
|
||||
it consists of a base layer with QWERTY layout, a momentary cursor-layer, and mouse-keys and multimedia layers.
|
||||
@ -0,0 +1,21 @@
|
||||
KBOD keyboard firmware
|
||||
======================
|
||||
|
||||
KBOD is a 60% Keyboard kit, hand-wired, with Arduino Micro as its controller. It's utilize 8x8 matrix and has layout similar to GH-60
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent readme](/).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and use ```make handwired-kbod-default``` to generate the .hex file. You may flash it with avrdude
|
||||
|
||||
## Flashing
|
||||
Something along this line:
|
||||
|
||||
```
|
||||
avrdude -p m32u4 -c avr109 -P <COM PORT> -C <avrdude conf file> -e -u flash:w:handwired_kbod_default.hex
|
||||
```
|
||||
|
||||
[More info](https://github.com/fudanchii/keyboard_of_disapproval)
|
||||
@ -0,0 +1,68 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
|
||||
@ -0,0 +1,17 @@
|
||||
#ifndef SSD1306_H
|
||||
#define SSD1306_H
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
|
||||
bool iota_gfx_init(void);
|
||||
void iota_gfx_task(void);
|
||||
bool iota_gfx_off(void);
|
||||
bool iota_gfx_on(void);
|
||||
void iota_gfx_flush(void);
|
||||
void iota_gfx_write_char(uint8_t c);
|
||||
void iota_gfx_write(const char *data);
|
||||
void iota_gfx_write_P(const char *data);
|
||||
void iota_gfx_clear_screen(void);
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,170 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Bigtuna.io
|
||||
#define PRODUCT Miuni32
|
||||
#define DESCRIPTION A custom keyboard for writers
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 3
|
||||
#define MATRIX_COLS 11
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F0, F4, D7}
|
||||
#define MATRIX_COL_PINS { C6, C7, F7, F6, F1, E6, B7, B3, B2, B1, B0}
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#define RGBLIGHT_TIMER
|
||||
#define RGB_DI_PIN D0 // The pin your RGB strip is wired to
|
||||
#define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio)
|
||||
#define RGBLED_NUM 7 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,21 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,49 @@
|
||||
#include "miuni32.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] ={
|
||||
{KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
|
||||
{KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_RSFT, KC_ENT},
|
||||
{KC_Z, KC_X, KC_C, KC_V, KC_V, KC_SPC, KC_B, KC_N, KC_M , MO(1), KC_RCTL}
|
||||
},
|
||||
[1] ={
|
||||
{KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL},
|
||||
{KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, KC_TRNS},
|
||||
{RGB_TOG, RGB_HUI, RGB_HUD, RGB_SAI, KC_TRNS, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, RGB_MOD},
|
||||
}
|
||||
};
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
@ -0,0 +1 @@
|
||||
# The default keymap for miuni32
|
||||
@ -0,0 +1,28 @@
|
||||
#include "miuni32.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
@ -0,0 +1,15 @@
|
||||
#ifndef MIUNI32_H
|
||||
#define MIUNI32_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A ) { \
|
||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A } \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,28 @@
|
||||
miuni32 keyboard firmware
|
||||
======================
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent readme](/).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/miuni32 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, simply run `make default`.
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
|
||||
|
||||
```
|
||||
$ make [default|jack|<name>]
|
||||
```
|
||||
|
||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
||||
@ -0,0 +1,67 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
@ -0,0 +1,21 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,12 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#define BACKLIGHT_PIN B2
|
||||
#define BACKLIGHT_LEVELS 7
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,138 @@
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
//Author: tong92 <tong92power@gmail.com>
|
||||
|
||||
#include "tv44.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#include "backlight.h"
|
||||
#endif
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define LOWER F(1)
|
||||
#define RAISE F(2)
|
||||
#define FTN MO(4)
|
||||
#define MOUSE M(10)
|
||||
#define GO_DEFT M(99)
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Qwerty
|
||||
* ,--------------------------------------------------------------------------.
|
||||
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
|
||||
* |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
* | Ctrl | A | S | D | F | G | H | J | K | L | ; | Enter|
|
||||
* |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
* | Shift | Z | X | C | V | B | N | M | , | . | / |Shift|
|
||||
* |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
* | Ftn1 | GUI | Alt | Space/LOWER | Space/RAISE | ' | [ | ] | Alt |
|
||||
* `--------------------------------------------------------------------------'
|
||||
*/
|
||||
[0] = {
|
||||
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
|
||||
{KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_ENT},
|
||||
{KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT },
|
||||
{FTN ,KC_LGUI,KC_LALT,LOWER,XXXXXXX,XXXXXXX,XXXXXXX,RAISE,KC_QUOT,KC_LBRC,KC_RBRC,KC_RALT}
|
||||
},
|
||||
/* LOWER
|
||||
* ,--------------------------------------------------------------------------.
|
||||
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | |
|
||||
* |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ |
|
||||
* |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo|
|
||||
* |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
* | | | | | | END | LEFT| Down|RIGHT|
|
||||
* `--------------------------------------------------------------------------'
|
||||
*/
|
||||
[1] = {
|
||||
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______},
|
||||
{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS },
|
||||
{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN },
|
||||
{XXXXXXX,_______,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT}
|
||||
},
|
||||
/* RAISE
|
||||
* ,--------------------------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | |
|
||||
* |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | |
|
||||
* |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo|
|
||||
* |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
* | | | | | | END | LEFT| Down|RIGHT|
|
||||
* `--------------------------------------------------------------------------'
|
||||
*/
|
||||
[2] ={
|
||||
{KC_TILD,KC_EXLM,KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,_______ },
|
||||
{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS,KC_EQL, KC_LCBR,KC_RCBR,KC_PIPE },
|
||||
{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN },
|
||||
{XXXXXXX,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT}
|
||||
},
|
||||
/* FTN
|
||||
* ,--------------------------------------------------------------------------.
|
||||
* | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DELET |
|
||||
* |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
* | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | |
|
||||
* |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
* | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | Ctrl|
|
||||
* |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
* | | DeskL | DeskR| Task Manager| DeskX | MOUSE| | | LED |
|
||||
* `--------------------------------------------------------------------------'
|
||||
*/
|
||||
[4] = {
|
||||
{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT},
|
||||
{_______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT) ,XXXXXXX ,LALT(KC_CAPS),KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX},
|
||||
{_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX ,LCTL(KC_CAPS),KC_SLCK,KC_HOME,XXXXXXX,KC_END,XXXXXXX,KC_RCTL},
|
||||
{_______,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LCTL(LALT(KC_DELT)),XXXXXXX,XXXXXXX,XXXXXXX,LGUI(LCTL(KC_F4)),MOUSE,XXXXXXX,XXXXXXX,M(0)}
|
||||
},
|
||||
/* MOUSE
|
||||
* ,--------------------------------------------------------------------------.
|
||||
* | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| | RESET |
|
||||
* |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
* | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | |
|
||||
* |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
* | | | | | | | |M_AC0|M_AC1|M_AC2| | |
|
||||
* |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
* | | | | GO_DEFAULT | GO_DEFAULT | | | | |
|
||||
* `--------------------------------------------------------------------------'
|
||||
*/
|
||||
[10] ={
|
||||
{XXXXXXX,XXXXXXX,XXXXXXX,KC_MS_U,XXXXXXX,XXXXXXX,XXXXXXX,KC_WH_L,KC_WH_U,KC_WH_R,XXXXXXX,RESET},
|
||||
{XXXXXXX,XXXXXXX,KC_MS_L,KC_MS_D,KC_MS_R,XXXXXXX,XXXXXXX,KC_BTN1,KC_WH_D,KC_BTN2,XXXXXXX,XXXXXXX},
|
||||
{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_ACL0,KC_ACL1,KC_ACL2,XXXXXXX,XXXXXXX},
|
||||
{XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX}
|
||||
}
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[1] = ACTION_LAYER_TAP_KEY(1, KC_SPC),
|
||||
[2] = ACTION_LAYER_TAP_KEY(2, KC_SPC)
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
backlight_step();
|
||||
#endif
|
||||
}
|
||||
break;
|
||||
case 10:
|
||||
if (record->event.pressed) {
|
||||
layer_on(10);
|
||||
}
|
||||
break;
|
||||
case 99:
|
||||
if (record->event.pressed) {
|
||||
layer_off(10);
|
||||
layer_off(4);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
@ -0,0 +1,52 @@
|
||||
# The tong92's keymap for tv44
|
||||
|
||||
- Arrow Layout (45key)
|
||||
- my keymap for Window User
|
||||
- Mouse Layer : space -> Default Layer
|
||||
|
||||
## Qwerty
|
||||
,--------------------------------------------------------------------------.
|
||||
| Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
|
||||
|------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
| Ctrl | A | S | D | F | G | H | J | K | L | ; | Enter|
|
||||
|-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
| Shift | Z | X | C | V | B | N | M | , | . | / |Shift|
|
||||
|--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
| Ftn1 | GUI | Alt | Space/LOWER | Space/RAISE | ' | [ | ] | Alt |
|
||||
`--------------------------------------------------------------------------'
|
||||
|
||||
|
||||
## RAISE
|
||||
,--------------------------------------------------------------------------.
|
||||
| ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | |
|
||||
|------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
| | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | |
|
||||
|-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
| | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo|
|
||||
|--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
| | | | | | END | LEFT| Down|RIGHT|
|
||||
`--------------------------------------------------------------------------'
|
||||
|
||||
|
||||
## FTN
|
||||
,--------------------------------------------------------------------------.
|
||||
| ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DELET |
|
||||
|------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
| |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | |
|
||||
|-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
| |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | Ctrl|
|
||||
|--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
| | DeskL | DeskR| Task Manager| DeskX | MOUSE| | | LED |
|
||||
`--------------------------------------------------------------------------'
|
||||
|
||||
|
||||
## MOUSE
|
||||
,--------------------------------------------------------------------------.
|
||||
| | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| | RESET |
|
||||
|------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------|
|
||||
| | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | |
|
||||
|-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------|
|
||||
| | | | | | | |M_AC0|M_AC1|M_AC2| | |
|
||||
|--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----|
|
||||
| | | | GO_DEFAULT | GO_DEFAULT | | | | |
|
||||
`--------------------------------------------------------------------------'
|
||||
Loading…
Reference in new issue