Jack Humbert
7 years ago
committed by
GitHub
parent
0c335270bd
commit
32d6a8b7ec
@ -0,0 +1,54 @@
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x2260
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER KBDFans
|
||||
#define PRODUCT DZ60
|
||||
#define DESCRIPTION DZ60 Keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_PIN B6
|
||||
#define BACKLIGHT_LEVELS 5
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,9 @@
|
||||
#include "dz60.h"
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
|
||||
} else {
|
||||
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,65 @@
|
||||
#ifndef DZ60_H
|
||||
#define DZ60_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// 标准配列
|
||||
#define KEYMAP( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
|
||||
K400, K401, K403, K404, K406, K408, K410, K411, K412, K413, K414 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||
{ K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
|
||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \
|
||||
{ K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_HHKB( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
|
||||
K401, K403, K406, K410, K411 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||
{ K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
|
||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \
|
||||
{ KC_NO, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, KC_NO, KC_NO } \
|
||||
}
|
||||
|
||||
#define KEYMAP_2_SHIFTS( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
|
||||
K400, K401, K403, K404, K406, K408, K410, K411, K412, K413, K414 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||
{ K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
|
||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \
|
||||
{ K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \
|
||||
}
|
||||
|
||||
// 带方向配列
|
||||
#define KEYMAP_DIRECTIONAL( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K312, K313, K314, \
|
||||
K400, K401, K403, K404, K406, K408, K410, K411, K412, K413, K414 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||
{ K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
|
||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, KC_NO, K312, K313, K314 }, \
|
||||
{ K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,61 @@
|
||||
#include "dz60.h"
|
||||
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(2), KC_NO, MO(1), KC_RCTL),
|
||||
|
||||
KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
KEYMAP(
|
||||
KC_TRNS, M(1), M(2), M(3), M(4), M(5), M(6), M(7), M(8), M(9), M(10), M(11), M(12), KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
SHIFT_ESC,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
switch (id) {
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,15 @@
|
||||
# DZ60
|
||||
|
||||
|
||||
|
||||
A customizable 60% keyboard.
|
||||
|
||||
Keyboard Maintainer: QMK Community
|
||||
Hardware Supported: DZ60
|
||||
Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/collections/pcb/products/dz60-60-pcb?variant=40971616717)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make dz60-default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
@ -0,0 +1,56 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
Loading…
Reference in new issue