Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander).

pull/1469/head
Dean Camera 16 years ago
parent 619b0b7b6b
commit 37b2130fb2

@ -43,10 +43,10 @@
* current encoding options, including baud rate, character format, parity mode and total number of
* bits in each data chunk.
*/
CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
ParityType: Parity_None,
DataBits: 8 };
CDC_Line_Coding_t LineCoding = { .BaudRateBPS = 9600,
.CharFormat = OneStopBit,
.ParityType = Parity_None,
.DataBits = 8 };
/** Current address counter. This stores the current address of the FLASH or EEPROM as set by the host,
* and is used when reading or writing to the AVRs memory (either FLASH or EEPROM depending on the issued

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x02,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x02,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: FIXED_CONTROL_ENDPOINT_SIZE,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
VendorID: 0x03EB,
ProductID: 0x204A,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x204A,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: NO_DESCRIPTOR,
ProductStrIndex: 0x01,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = NO_DESCRIPTOR,
.ProductStrIndex = 0x01,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in SRAM memory, describes the usage
@ -71,113 +71,113 @@ USB_Descriptor_Device_t DeviceDescriptor =
*/
USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 2,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
CCI_Interface:
.CCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x02,
SubClass: 0x02,
Protocol: 0x01,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
CDC_Functional_IntHeader:
.CDC_Functional_IntHeader =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x00,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x00,
Data: {0x10, 0x01}
.Data = {0x10, 0x01}
},
CDC_Functional_CallManagement:
.CDC_Functional_CallManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x01,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x01,
Data: {0x03, 0x01}
.Data = {0x03, 0x01}
},
CDC_Functional_AbstractControlManagement:
.CDC_Functional_AbstractControlManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), Type: 0x24},
SubType: 0x02,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
.SubType = 0x02,
Data: {0x06}
.Data = {0x06}
},
CDC_Functional_Union:
.CDC_Functional_Union =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x06,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x06,
Data: {0x00, 0x01}
.Data = {0x00, 0x01}
},
ManagementEndpoint:
.ManagementEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: CDC_NOTIFICATION_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0x02
},
DCI_Interface:
.DCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x0A,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
DataOutEndpoint:
.DataOutEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
DataInEndpoint:
.DataInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
}
};
@ -187,9 +187,9 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
*/
USB_Descriptor_String_t LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -198,9 +198,9 @@ USB_Descriptor_String_t LanguageString =
*/
USB_Descriptor_String_t ProductString =
{
Header: {Size: USB_STRING_LEN(15), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String},
UnicodeString: L"AVR CDC Bootloader"
.UnicodeString = L"AVR CDC Bootloader"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -225,7 +225,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket)
{
uint16_t Words[2];
uint32_t Long;
} CurrFlashAddress = {Words: {StartAddr, Flash64KBPage}};
} CurrFlashAddress = {.Words = {StartAddr, Flash64KBPage}};
uint32_t CurrFlashPageStartAddress = CurrFlashAddress.Long;
uint8_t WordsInFlashPage = 0;
@ -336,7 +336,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket)
{
uint16_t Words[2];
uint32_t Long;
} CurrFlashAddress = {Words: {StartAddr, Flash64KBPage}};
} CurrFlashAddress = {.Words = {StartAddr, Flash64KBPage}};
while (WordsRemaining--)
{
@ -531,8 +531,8 @@ static void LoadStartEndAddresses(void)
{
uint8_t Bytes[2];
uint16_t Word;
} Address[2] = {{Bytes: {SentCommand.Data[2], SentCommand.Data[1]}},
{Bytes: {SentCommand.Data[4], SentCommand.Data[3]}}};
} Address[2] = {{.Bytes = {SentCommand.Data[2], SentCommand.Data[1]}},
{.Bytes = {SentCommand.Data[4], SentCommand.Data[3]}}};
/* Load in the start and ending read addresses from the sent data packet */
StartAddr = Address[0].Word;
@ -557,7 +557,7 @@ static void ProcessMemProgCommand(void)
{
uint16_t Words[2];
uint32_t Long;
} CurrFlashAddress = {Words: {StartAddr, Flash64KBPage}};
} CurrFlashAddress = {.Words = {StartAddr, Flash64KBPage}};
/* Erase the current page's temp buffer */
boot_page_erase(CurrFlashAddress.Long);
@ -639,7 +639,7 @@ static void ProcessWriteCommand(void)
{
uint8_t Bytes[2];
AppPtr_t FuncPtr;
} Address = {Bytes: {SentCommand.Data[4], SentCommand.Data[3]}};
} Address = {.Bytes = {SentCommand.Data[4], SentCommand.Data[3]}};
AppStartPtr = Address.FuncPtr;

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: FIXED_CONTROL_ENDPOINT_SIZE,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
VendorID: 0x03EB,
ProductID: PRODUCT_ID_CODE,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = PRODUCT_ID_CODE,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: NO_DESCRIPTOR,
ProductStrIndex: 0x01,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = NO_DESCRIPTOR,
.ProductStrIndex = 0x01,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,47 +71,47 @@ USB_Descriptor_Device_t DeviceDescriptor =
*/
USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
DFUInterface:
.DFUInterface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 0,
.TotalEndpoints = 0,
Class: 0xFE,
SubClass: 0x01,
Protocol: 0x02,
.Class = 0xFE,
.SubClass = 0x01,
.Protocol = 0x02,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
DFUFunctional:
.DFUFunctional =
{
Header: {Size: sizeof(USB_DFU_Functional_Descriptor_t), Type: DTYPE_DFUFunctional},
.Header = {.Size = sizeof(USB_DFU_Functional_Descriptor_t), .Type = DTYPE_DFUFunctional},
Attributes: (ATTR_CAN_UPLOAD | ATTR_CAN_DOWNLOAD),
.Attributes = (ATTR_CAN_UPLOAD | ATTR_CAN_DOWNLOAD),
DetatchTimeout: 0x0000,
TransferSize: 0x0c00,
.DetatchTimeout = 0x0000,
.TransferSize = 0x0c00,
DFUSpecification: VERSION_BCD(01.01)
.DFUSpecification = VERSION_BCD(01.01)
}
};
@ -121,9 +121,9 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
*/
USB_Descriptor_String_t LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -132,9 +132,9 @@ USB_Descriptor_String_t LanguageString =
*/
USB_Descriptor_String_t ProductString =
{
Header: {Size: USB_STRING_LEN(18), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},
UnicodeString: L"AVR DFU Bootloader"
.UnicodeString = L"AVR DFU Bootloader"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -64,24 +64,24 @@ USB_Descriptor_HIDReport_Datatype_t HIDReport[] =
*/
USB_Descriptor_Device_t DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x16C0,
ProductID: 0x0478,
ReleaseNumber: 0x0010,
.VendorID = 0x16C0,
.ProductID = 0x0478,
.ReleaseNumber = 0x0010,
ManufacturerStrIndex: NO_DESCRIPTOR,
ProductStrIndex: 0x01,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = NO_DESCRIPTOR,
.ProductStrIndex = 0x01,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -91,56 +91,56 @@ USB_Descriptor_Device_t DeviceDescriptor =
*/
USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
Interface:
.Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0x00,
AlternateSetting: 0x00,
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x03,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x03,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
HIDDescriptor:
.HIDDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
.Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
HIDSpec: VERSION_BCD(01.11),
CountryCode: 0x00,
TotalHIDReports: 0x01,
HIDReportType: DTYPE_Report,
HIDReportLength: sizeof(HIDReport)
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalHIDReports = 0x01,
.HIDReportType = DTYPE_Report,
.HIDReportLength = sizeof(HIDReport)
},
HIDEndpoint:
.HIDEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | HID_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: HID_EPSIZE,
PollingIntervalMS: 0x40
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | HID_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = HID_EPSIZE,
.PollingIntervalMS = 0x40
},
};
@ -150,9 +150,9 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
*/
USB_Descriptor_String_t LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -161,9 +161,9 @@ USB_Descriptor_String_t LanguageString =
*/
USB_Descriptor_String_t ProductString =
{
Header: {Size: USB_STRING_LEN(21), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(21), .Type = DTYPE_String},
UnicodeString: L"AVR Teensy Bootloader"
.UnicodeString = L"AVR Teensy Bootloader"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Audio_Task , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Audio_Task , .TaskStatus = TASK_STOP },
};

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(02.00),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(02.00),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2047,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2047,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,164 +71,164 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 2,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
AudioControlInterface:
.AudioControlInterface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 0,
.TotalEndpoints = 0,
Class: 0x01,
SubClass: 0x01,
Protocol: 0x00,
.Class = 0x01,
.SubClass = 0x01,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
AudioControlInterface_SPC:
.AudioControlInterface_SPC =
{
Header: {Size: sizeof(USB_AudioInterface_AC_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_Header,
.Header = {.Size = sizeof(USB_AudioInterface_AC_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_Header,
ACSpecification: VERSION_BCD(01.00),
TotalLength: (sizeof(USB_AudioInterface_AC_t) +
.ACSpecification = VERSION_BCD(01.00),
.TotalLength = (sizeof(USB_AudioInterface_AC_t) +
sizeof(USB_AudioInputTerminal_t) +
sizeof(USB_AudioOutputTerminal_t)),
InCollection: 1,
InterfaceNumbers: {1},
.InCollection = 1,
.InterfaceNumbers = {1},
},
InputTerminal:
.InputTerminal =
{
Header: {Size: sizeof(USB_AudioInputTerminal_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_InputTerminal,
.Header = {.Size = sizeof(USB_AudioInputTerminal_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_InputTerminal,
TerminalID: 0x01,
TerminalType: TERMINAL_IN_MIC,
AssociatedOutputTerminal: 0x00,
.TerminalID = 0x01,
.TerminalType = TERMINAL_IN_MIC,
.AssociatedOutputTerminal = 0x00,
TotalChannels: 1,
ChannelConfig: 0,
.TotalChannels = 1,
.ChannelConfig = 0,
ChannelStrIndex: NO_DESCRIPTOR,
TerminalStrIndex: NO_DESCRIPTOR
.ChannelStrIndex = NO_DESCRIPTOR,
.TerminalStrIndex = NO_DESCRIPTOR
},
OutputTerminal:
.OutputTerminal =
{
Header: {Size: sizeof(USB_AudioOutputTerminal_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_OutputTerminal,
.Header = {.Size = sizeof(USB_AudioOutputTerminal_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_OutputTerminal,
TerminalID: 0x02,
TerminalType: TERMINAL_STREAMING,
AssociatedInputTerminal: 0x00,
.TerminalID = 0x02,
.TerminalType = TERMINAL_STREAMING,
.AssociatedInputTerminal = 0x00,
SourceID: 0x01,
.SourceID = 0x01,
TerminalStrIndex: NO_DESCRIPTOR
.TerminalStrIndex = NO_DESCRIPTOR
},
AudioStreamInterface_Alt0:
.AudioStreamInterface_Alt0 =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 0,
.TotalEndpoints = 0,
Class: 0x01,
SubClass: 0x02,
Protocol: 0x00,
.Class = 0x01,
.SubClass = 0x02,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
AudioStreamInterface_Alt1:
.AudioStreamInterface_Alt1 =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 1,
.InterfaceNumber = 1,
.AlternateSetting = 1,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x01,
SubClass: 0x02,
Protocol: 0x00,
.Class = 0x01,
.SubClass = 0x02,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
AudioStreamInterface_SPC:
.AudioStreamInterface_SPC =
{
Header: {Size: sizeof(USB_AudioInterface_AS_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_General,
.Header = {.Size = sizeof(USB_AudioInterface_AS_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_General,
TerminalLink: 0x02,
.TerminalLink = 0x02,
FrameDelay: 1,
AudioFormat: 0x0001
.FrameDelay = 1,
.AudioFormat = 0x0001
},
AudioFormat:
.AudioFormat =
{
Header: {Size: sizeof(USB_AudioFormat_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_Format,
.Header = {.Size = sizeof(USB_AudioFormat_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_Format,
FormatType: 0x01,
Channels: 0x01,
.FormatType = 0x01,
.Channels = 0x01,
SubFrameSize: 0x02,
BitResolution: 16,
SampleFrequencyType: (sizeof(ConfigurationDescriptor.AudioFormat.SampleFrequencies) / sizeof(AudioSampleFreq_t)),
.SubFrameSize = 0x02,
.BitResolution = 16,
.SampleFrequencyType = (sizeof(ConfigurationDescriptor.AudioFormat.SampleFrequencies) / sizeof(AudioSampleFreq_t)),
SampleFrequencies: {SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)}
.SampleFrequencies = {SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)}
},
AudioEndpoint:
.AudioEndpoint =
{
Endpoint:
.Endpoint =
{
Header: {Size: sizeof(USB_AudioStreamEndpoint_Std_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_AudioStreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | AUDIO_STREAM_EPNUM),
Attributes: (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
EndpointSize: AUDIO_STREAM_EPSIZE,
PollingIntervalMS: 1
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | AUDIO_STREAM_EPNUM),
.Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AUDIO_STREAM_EPSIZE,
.PollingIntervalMS = 1
},
Refresh: 0,
SyncEndpointNumber: 0
.Refresh = 0,
.SyncEndpointNumber = 0
},
AudioEndpoint_SPC:
.AudioEndpoint_SPC =
{
Header: {Size: sizeof(USB_AudioStreamEndpoint_Spc_t), Type: DTYPE_AudioEndpoint},
Subtype: DSUBTYPE_General,
.Header = {.Size = sizeof(USB_AudioStreamEndpoint_Spc_t), .Type = DTYPE_AudioEndpoint},
.Subtype = DSUBTYPE_General,
Attributes: 0x00,
.Attributes = 0x00,
LockDelayUnits: 0x00,
LockDelay: 0x0000
.LockDelayUnits = 0x00,
.LockDelay = 0x0000
}
};
@ -238,9 +238,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -249,9 +249,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -260,9 +260,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(18), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},
UnicodeString: L"LUFA Audio In Demo"
.UnicodeString = L"LUFA Audio In Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Audio_Task , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Audio_Task , .TaskStatus = TASK_STOP },
};

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(02.00),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(02.00),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2046,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2046,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,164 +71,164 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 2,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
AudioControlInterface:
.AudioControlInterface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 0,
.TotalEndpoints = 0,
Class: 0x01,
SubClass: 0x01,
Protocol: 0x00,
.Class = 0x01,
.SubClass = 0x01,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
AudioControlInterface_SPC:
.AudioControlInterface_SPC =
{
Header: {Size: sizeof(USB_AudioInterface_AC_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_Header,
.Header = {.Size = sizeof(USB_AudioInterface_AC_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_Header,
ACSpecification: VERSION_BCD(01.00),
TotalLength: (sizeof(USB_AudioInterface_AC_t) +
.ACSpecification = VERSION_BCD(01.00),
.TotalLength = (sizeof(USB_AudioInterface_AC_t) +
sizeof(USB_AudioInputTerminal_t) +
sizeof(USB_AudioOutputTerminal_t)),
InCollection: 1,
InterfaceNumbers: {1},
.InCollection = 1,
.InterfaceNumbers = {1},
},
InputTerminal:
.InputTerminal =
{
Header: {Size: sizeof(USB_AudioInputTerminal_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_InputTerminal,
.Header = {.Size = sizeof(USB_AudioInputTerminal_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_InputTerminal,
TerminalID: 0x01,
TerminalType: TERMINAL_STREAMING,
AssociatedOutputTerminal: 0x00,
.TerminalID = 0x01,
.TerminalType = TERMINAL_STREAMING,
.AssociatedOutputTerminal = 0x00,
TotalChannels: 2,
ChannelConfig: (CHANNEL_LEFT_FRONT | CHANNEL_RIGHT_FRONT),
.TotalChannels = 2,
.ChannelConfig = (CHANNEL_LEFT_FRONT | CHANNEL_RIGHT_FRONT),
ChannelStrIndex: NO_DESCRIPTOR,
TerminalStrIndex: NO_DESCRIPTOR
.ChannelStrIndex = NO_DESCRIPTOR,
.TerminalStrIndex = NO_DESCRIPTOR
},
OutputTerminal:
.OutputTerminal =
{
Header: {Size: sizeof(USB_AudioOutputTerminal_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_OutputTerminal,
.Header = {.Size = sizeof(USB_AudioOutputTerminal_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_OutputTerminal,
TerminalID: 0x02,
TerminalType: TERMINAL_OUT_SPEAKER,
AssociatedInputTerminal: 0x00,
.TerminalID = 0x02,
.TerminalType = TERMINAL_OUT_SPEAKER,
.AssociatedInputTerminal = 0x00,
SourceID: 0x01,
.SourceID = 0x01,
TerminalStrIndex: NO_DESCRIPTOR
.TerminalStrIndex = NO_DESCRIPTOR
},
AudioStreamInterface_Alt0:
.AudioStreamInterface_Alt0 =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 0,
.TotalEndpoints = 0,
Class: 0x01,
SubClass: 0x02,
Protocol: 0x00,
.Class = 0x01,
.SubClass = 0x02,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
AudioStreamInterface_Alt1:
.AudioStreamInterface_Alt1 =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 1,
.InterfaceNumber = 1,
.AlternateSetting = 1,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x01,
SubClass: 0x02,
Protocol: 0x00,
.Class = 0x01,
.SubClass = 0x02,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
AudioStreamInterface_SPC:
.AudioStreamInterface_SPC =
{
Header: {Size: sizeof(USB_AudioInterface_AS_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_General,
.Header = {.Size = sizeof(USB_AudioInterface_AS_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_General,
TerminalLink: 0x01,
.TerminalLink = 0x01,
FrameDelay: 1,
AudioFormat: 0x0001
.FrameDelay = 1,
.AudioFormat = 0x0001
},
AudioFormat:
.AudioFormat =
{
Header: {Size: sizeof(USB_AudioFormat_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_Format,
.Header = {.Size = sizeof(USB_AudioFormat_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_Format,
FormatType: 0x01,
Channels: 0x02,
.FormatType = 0x01,
.Channels = 0x02,
SubFrameSize: 0x02,
BitResolution: 16,
.SubFrameSize = 0x02,
.BitResolution = 16,
SampleFrequencyType: (sizeof(ConfigurationDescriptor.AudioFormat.SampleFrequencies) / sizeof(AudioSampleFreq_t)),
SampleFrequencies: {SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)}
.SampleFrequencyType = (sizeof(ConfigurationDescriptor.AudioFormat.SampleFrequencies) / sizeof(AudioSampleFreq_t)),
.SampleFrequencies = {SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)}
},
AudioEndpoint:
.AudioEndpoint =
{
Endpoint:
.Endpoint =
{
Header: {Size: sizeof(USB_AudioStreamEndpoint_Std_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_AudioStreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | AUDIO_STREAM_EPNUM),
Attributes: (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
EndpointSize: AUDIO_STREAM_EPSIZE,
PollingIntervalMS: 1
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | AUDIO_STREAM_EPNUM),
.Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = AUDIO_STREAM_EPSIZE,
.PollingIntervalMS = 1
},
Refresh: 0,
SyncEndpointNumber: 0
.Refresh = 0,
.SyncEndpointNumber = 0
},
AudioEndpoint_SPC:
.AudioEndpoint_SPC =
{
Header: {Size: sizeof(USB_AudioStreamEndpoint_Spc_t), Type: DTYPE_AudioEndpoint},
Subtype: DSUBTYPE_General,
.Header = {.Size = sizeof(USB_AudioStreamEndpoint_Spc_t), .Type = DTYPE_AudioEndpoint},
.Subtype = DSUBTYPE_General,
Attributes: EP_ACCEPTS_SMALL_PACKETS,
.Attributes = EP_ACCEPTS_SMALL_PACKETS,
LockDelayUnits: 0x00,
LockDelay: 0x0000
.LockDelayUnits = 0x00,
.LockDelay = 0x0000
}
};
@ -238,9 +238,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -249,9 +249,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -260,9 +260,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(19), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String},
UnicodeString: L"LUFA Audio Out Demo"
.UnicodeString = L"LUFA Audio Out Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: CDC_Task , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = CDC_Task , .TaskStatus = TASK_STOP },
};
/* Globals: */
@ -52,10 +52,10 @@ TASK_LIST
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
* serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
ParityType: Parity_None,
DataBits: 8 };
CDC_Line_Coding_t LineCoding = { .BaudRateBPS = 9600,
.CharFormat = OneStopBit,
.ParityType = Parity_None,
.DataBits = 8 };
/** String to print through the virtual serial port when the joystick is pressed upwards. */
char JoystickUpString[] = "Joystick Up\r\n";
@ -256,11 +256,11 @@ TASK(CDC_Task)
*/
USB_Notification_Header_t Notification = (USB_Notification_Header_t)
{
NotificationType: (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
Notification: NOTIF_SerialState,
wValue: 0,
wIndex: 0,
wLength: sizeof(uint16_t),
.NotificationType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
.Notification = NOTIF_SerialState,
.wValue = 0,
.wIndex = 0,
.wLength = sizeof(uint16_t),
};
uint16_t LineStateMask;

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x02,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x02,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2044,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2044,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,113 +71,113 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 2,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
CCI_Interface:
.CCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x02,
SubClass: 0x02,
Protocol: 0x01,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
CDC_Functional_IntHeader:
.CDC_Functional_IntHeader =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x00,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x00,
Data: {0x01, 0x10}
.Data = {0x01, 0x10}
},
CDC_Functional_CallManagement:
.CDC_Functional_CallManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x01,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x01,
Data: {0x03, 0x01}
.Data = {0x03, 0x01}
},
CDC_Functional_AbstractControlManagement:
.CDC_Functional_AbstractControlManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), Type: 0x24},
SubType: 0x02,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
.SubType = 0x02,
Data: {0x06}
.Data = {0x06}
},
CDC_Functional_Union:
.CDC_Functional_Union =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x06,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x06,
Data: {0x00, 0x01}
.Data = {0x00, 0x01}
},
ManagementEndpoint:
.ManagementEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: CDC_NOTIFICATION_EPSIZE,
PollingIntervalMS: 0xFF
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
DCI_Interface:
.DCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x0A,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
DataOutEndpoint:
.DataOutEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
DataInEndpoint:
.DataInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
}
};
@ -187,9 +187,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -198,9 +198,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -209,9 +209,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(13), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
UnicodeString: L"LUFA CDC Demo"
.UnicodeString = L"LUFA CDC Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0xEF,
SubClass: 0x02,
Protocol: 0x01,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0xEF,
.SubClass = 0x02,
.Protocol = 0x01,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x204E,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x204E,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,235 +71,235 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 4,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 4,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
IAD1:
.IAD1 =
{
Header: {Size: sizeof(USB_Descriptor_Interface_Association_t), Type: DTYPE_InterfaceAssociation},
.Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
FirstInterfaceIndex: 0,
TotalInterfaces: 2,
.FirstInterfaceIndex = 0,
.TotalInterfaces = 2,
Class: 0x02,
SubClass: 0x02,
Protocol: 0x01,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
IADStrIndex: NO_DESCRIPTOR
.IADStrIndex = NO_DESCRIPTOR
},
CDC1_CCI_Interface:
.CDC1_CCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x02,
SubClass: 0x02,
Protocol: 0x01,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
CDC1_Functional_IntHeader:
.CDC1_Functional_IntHeader =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x00,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x00,
Data: {0x01, 0x10}
.Data = {0x01, 0x10}
},
CDC1_Functional_CallManagement:
.CDC1_Functional_CallManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x01,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x01,
Data: {0x03, 0x01}
.Data = {0x03, 0x01}
},
CDC1_Functional_AbstractControlManagement:
.CDC1_Functional_AbstractControlManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), Type: 0x24},
SubType: 0x02,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
.SubType = 0x02,
Data: {0x06}
.Data = {0x06}
},
CDC1_Functional_Union:
.CDC1_Functional_Union =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x06,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x06,
Data: {0x00, 0x01}
.Data = {0x00, 0x01}
},
CDC1_ManagementEndpoint:
.CDC1_ManagementEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_NOTIFICATION_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: CDC_NOTIFICATION_EPSIZE,
PollingIntervalMS: 0xFF
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_NOTIFICATION_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
CDC1_DCI_Interface:
.CDC1_DCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x0A,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
CDC1_DataOutEndpoint:
.CDC1_DataOutEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC1_RX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC1_RX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
CDC1_DataInEndpoint:
.CDC1_DataInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_TX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_TX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
IAD2:
.IAD2 =
{
Header: {Size: sizeof(USB_Descriptor_Interface_Association_t), Type: DTYPE_InterfaceAssociation},
.Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
FirstInterfaceIndex: 2,
TotalInterfaces: 2,
.FirstInterfaceIndex = 2,
.TotalInterfaces = 2,
Class: 0x02,
SubClass: 0x02,
Protocol: 0x01,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
IADStrIndex: NO_DESCRIPTOR
.IADStrIndex = NO_DESCRIPTOR
},
CDC2_CCI_Interface:
.CDC2_CCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 2,
AlternateSetting: 0,
.InterfaceNumber = 2,
.AlternateSetting = 0,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x02,
SubClass: 0x02,
Protocol: 0x01,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
CDC2_Functional_IntHeader:
.CDC2_Functional_IntHeader =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x00,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x00,
Data: {0x01, 0x10}
.Data = {0x01, 0x10}
},
CDC2_Functional_CallManagement:
.CDC2_Functional_CallManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x01,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x01,
Data: {0x03, 0x03}
.Data = {0x03, 0x03}
},
CDC2_Functional_AbstractControlManagement:
.CDC2_Functional_AbstractControlManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), Type: 0x24},
SubType: 0x02,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
.SubType = 0x02,
Data: {0x06}
.Data = {0x06}
},
CDC2_Functional_Union:
.CDC2_Functional_Union =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x06,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x06,
Data: {0x02, 0x03}
.Data = {0x02, 0x03}
},
CDC2_ManagementEndpoint:
.CDC2_ManagementEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_NOTIFICATION_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: CDC_NOTIFICATION_EPSIZE,
PollingIntervalMS: 0xFF
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_NOTIFICATION_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
CDC2_DCI_Interface:
.CDC2_DCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 3,
AlternateSetting: 0,
.InterfaceNumber = 3,
.AlternateSetting = 0,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x0A,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
CDC2_DataOutEndpoint:
.CDC2_DataOutEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC2_RX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC2_RX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
CDC2_DataInEndpoint:
.CDC2_DataInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_TX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_TX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
}
};
@ -309,9 +309,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -320,9 +320,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -331,9 +331,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(13), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
UnicodeString: L"LUFA Dual CDC Demo"
.UnicodeString = L"LUFA Dual CDC Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -39,9 +39,9 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: CDC1_Task , TaskStatus: TASK_STOP },
{ Task: CDC2_Task , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = CDC1_Task , .TaskStatus = TASK_STOP },
{ .Task = CDC2_Task , .TaskStatus = TASK_STOP },
};
/* Globals: */
@ -53,10 +53,10 @@ TASK_LIST
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
* serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding1 = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
ParityType: Parity_None,
DataBits: 8 };
CDC_Line_Coding_t LineCoding1 = { .BaudRateBPS = 9600,
.CharFormat = OneStopBit,
.ParityType = Parity_None,
.DataBits = 8 };
/** Contains the current baud rate and other settings of the second virtual serial port. While this demo does not use
* the physical USART and thus does not use these settings, they must still be retained and returned to the host
@ -66,10 +66,10 @@ CDC_Line_Coding_t LineCoding1 = { BaudRateBPS: 9600,
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
* serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding2 = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
ParityType: Parity_None,
DataBits: 8 };
CDC_Line_Coding_t LineCoding2 = { .BaudRateBPS = 9600,
.CharFormat = OneStopBit,
.ParityType = Parity_None,
.DataBits = 8 };
/** String to print through the first virtual serial port when the joystick is pressed upwards. */
char JoystickUpString[] = "Joystick Up\r\n";

@ -70,24 +70,24 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x204F,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x204F,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -97,66 +97,66 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
Interface:
.Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0x00,
AlternateSetting: 0x00,
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x03,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x03,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
GenericHID:
.GenericHID =
{
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
.Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
HIDSpec: VERSION_BCD(01.11),
CountryCode: 0x00,
TotalHIDReports: 0x01,
HIDReportType: DTYPE_Report,
HIDReportLength: sizeof(GenericReport)
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalHIDReports = 0x01,
.HIDReportType = DTYPE_Report,
.HIDReportLength = sizeof(GenericReport)
},
GenericINEndpoint:
.GenericINEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: GENERIC_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = GENERIC_EPSIZE,
.PollingIntervalMS = 0x02
},
GenericOUTEndpoint:
.GenericOUTEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | GENERIC_OUT_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: GENERIC_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | GENERIC_OUT_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = GENERIC_EPSIZE,
.PollingIntervalMS = 0x02
}
};
@ -166,9 +166,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -177,9 +177,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -188,9 +188,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(13), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(21), .Type = DTYPE_String},
UnicodeString: L"LUFA HID Demo"
.UnicodeString = L"LUFA Generic HID Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -40,11 +40,11 @@
TASK_LIST
{
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
#endif
#if !defined(INTERRUPT_DATA_ENDPOINT)
{ Task: USB_HID_Report , TaskStatus: TASK_STOP },
{ .Task = USB_HID_Report , .TaskStatus = TASK_STOP },
#endif
};

@ -80,24 +80,24 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2043,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2043,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -107,56 +107,56 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
Interface:
.Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0x00,
AlternateSetting: 0x00,
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x03,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x03,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
JoystickHID:
.JoystickHID =
{
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
.Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
HIDSpec: VERSION_BCD(01.11),
CountryCode: 0x00,
TotalHIDReports: 0x01,
HIDReportType: DTYPE_Report,
HIDReportLength: sizeof(JoystickReport)
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalHIDReports = 0x01,
.HIDReportType = DTYPE_Report,
.HIDReportLength = sizeof(JoystickReport)
},
JoystickEndpoint:
.JoystickEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | JOYSTICK_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: JOYSTICK_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | JOYSTICK_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = JOYSTICK_EPSIZE,
.PollingIntervalMS = 0x02
}
};
@ -166,9 +166,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -177,9 +177,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -188,9 +188,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(18), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},
UnicodeString: L"LUFA Joystick Demo"
.UnicodeString = L"LUFA Joystick Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Joystick_Report , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Joystick_Report , .TaskStatus = TASK_STOP },
};
/** Main program entry point. This routine configures the hardware required by the application, then

@ -87,24 +87,24 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2042,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2042,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -114,66 +114,66 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
Interface:
.Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0x00,
AlternateSetting: 0x00,
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x03,
SubClass: 0x01,
Protocol: 0x01,
.Class = 0x03,
.SubClass = 0x01,
.Protocol = 0x01,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
KeyboardHID:
.KeyboardHID =
{
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
.Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
HIDSpec: VERSION_BCD(01.11),
CountryCode: 0x00,
TotalHIDReports: 0x01,
HIDReportType: DTYPE_Report,
HIDReportLength: sizeof(KeyboardReport)
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalHIDReports = 0x01,
.HIDReportType = DTYPE_Report,
.HIDReportLength = sizeof(KeyboardReport)
},
KeyboardEndpoint:
.KeyboardEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: KEYBOARD_EPSIZE,
PollingIntervalMS: 0x04
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = KEYBOARD_EPSIZE,
.PollingIntervalMS = 0x04
},
KeyboardLEDsEndpoint:
.KeyboardLEDsEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | KEYBOARD_LEDS_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: KEYBOARD_EPSIZE,
PollingIntervalMS: 0x04
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | KEYBOARD_LEDS_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = KEYBOARD_EPSIZE,
.PollingIntervalMS = 0x04
}
};
@ -183,9 +183,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -194,9 +194,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(16), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(16), .Type = DTYPE_String},
UnicodeString: L"Denver Gingerich"
.UnicodeString = L"Denver Gingerich"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -205,9 +205,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(18), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},
UnicodeString: L"LUFA Keyboard Demo"
.UnicodeString = L"LUFA Keyboard Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -41,11 +41,11 @@
TASK_LIST
{
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
#endif
#if !defined(INTERRUPT_DATA_ENDPOINT)
{ Task: USB_Keyboard_Report , TaskStatus: TASK_STOP },
{ .Task = USB_Keyboard_Report , .TaskStatus = TASK_STOP },
#endif
};

@ -120,24 +120,24 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x204D,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x204D,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -147,103 +147,103 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 2,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
KeyboardInterface:
.KeyboardInterface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0x00,
AlternateSetting: 0x00,
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x03,
SubClass: 0x01,
Protocol: 0x01,
.Class = 0x03,
.SubClass = 0x01,
.Protocol = 0x01,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
KeyboardHID:
.KeyboardHID =
{
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
.Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
HIDSpec: VERSION_BCD(01.11),
CountryCode: 0x00,
TotalHIDReports: 0x01,
HIDReportType: DTYPE_Report,
HIDReportLength: sizeof(KeyboardReport)
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalHIDReports = 0x01,
.HIDReportType = DTYPE_Report,
.HIDReportLength = sizeof(KeyboardReport)
},
KeyboardInEndpoint:
.KeyboardInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_IN_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: HID_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_IN_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = HID_EPSIZE,
.PollingIntervalMS = 0x02
},
KeyboardOutEndpoint:
.KeyboardOutEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | KEYBOARD_OUT_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: HID_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | KEYBOARD_OUT_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = HID_EPSIZE,
.PollingIntervalMS = 0x02
},
MouseInterface:
.MouseInterface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0x01,
AlternateSetting: 0x00,
.InterfaceNumber = 0x01,
.AlternateSetting = 0x00,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x03,
SubClass: 0x01,
Protocol: 0x02,
.Class = 0x03,
.SubClass = 0x01,
.Protocol = 0x02,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
MouseHID:
.MouseHID =
{
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
.Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
HIDSpec: VERSION_BCD(01.11),
CountryCode: 0x00,
TotalHIDReports: 0x01,
HIDReportType: DTYPE_Report,
HIDReportLength: sizeof(MouseReport)
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalHIDReports = 0x01,
.HIDReportType = DTYPE_Report,
.HIDReportLength = sizeof(MouseReport)
},
MouseInEndpoint:
.MouseInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | MOUSE_IN_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: HID_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MOUSE_IN_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = HID_EPSIZE,
.PollingIntervalMS = 0x02
}
};
@ -253,9 +253,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -264,9 +264,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -275,9 +275,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(28), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(28), .Type = DTYPE_String},
UnicodeString: L"LUFA Mouse and Keyboard Demo"
.UnicodeString = L"LUFA Mouse and Keyboard Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -40,9 +40,9 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Mouse , TaskStatus: TASK_RUN },
{ Task: USB_Keyboard , TaskStatus: TASK_RUN },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Mouse , .TaskStatus = TASK_RUN },
{ .Task = USB_Keyboard , .TaskStatus = TASK_RUN },
};
/* Global Variables */

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2048,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2048,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,175 +71,175 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 2,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
AudioControlInterface:
.AudioControlInterface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 0,
.TotalEndpoints = 0,
Class: 0x01,
SubClass: 0x01,
Protocol: 0x00,
.Class = 0x01,
.SubClass = 0x01,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
AudioControlInterface_SPC:
.AudioControlInterface_SPC =
{
Header: {Size: sizeof(USB_AudioInterface_AC_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_Header,
.Header = {.Size = sizeof(USB_AudioInterface_AC_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_Header,
ACSpecification: VERSION_BCD(01.00),
TotalLength: sizeof(USB_AudioInterface_AC_t),
.ACSpecification = VERSION_BCD(01.00),
.TotalLength = sizeof(USB_AudioInterface_AC_t),
InCollection: 1,
InterfaceNumbers: {1},
.InCollection = 1,
.InterfaceNumbers = {1},
},
AudioStreamInterface:
.AudioStreamInterface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x01,
SubClass: 0x03,
Protocol: 0x00,
.Class = 0x01,
.SubClass = 0x03,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
AudioStreamInterface_SPC:
.AudioStreamInterface_SPC =
{
Header: {Size: sizeof(USB_AudioInterface_MIDI_AS_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_General,
.Header = {.Size = sizeof(USB_AudioInterface_MIDI_AS_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_General,
AudioSpecification: VERSION_BCD(01.00),
.AudioSpecification = VERSION_BCD(01.00),
TotalLength: (sizeof(USB_Descriptor_Configuration_t) - offsetof(USB_Descriptor_Configuration_t, AudioStreamInterface_SPC))
.TotalLength = (sizeof(USB_Descriptor_Configuration_t) - offsetof(USB_Descriptor_Configuration_t, AudioStreamInterface_SPC))
},
MIDI_In_Jack_Emb:
.MIDI_In_Jack_Emb =
{
Header: {Size: sizeof(USB_MIDI_In_Jack_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_InputJack,
.Header = {.Size = sizeof(USB_MIDI_In_Jack_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_InputJack,
JackType: JACKTYPE_EMBEDDED,
JackID: 0x01,
.JackType = JACKTYPE_EMBEDDED,
.JackID = 0x01,
JackStrIndex: NO_DESCRIPTOR
.JackStrIndex = NO_DESCRIPTOR
},
MIDI_In_Jack_Ext:
.MIDI_In_Jack_Ext =
{
Header: {Size: sizeof(USB_MIDI_In_Jack_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_InputJack,
.Header = {.Size = sizeof(USB_MIDI_In_Jack_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_InputJack,
JackType: JACKTYPE_EXTERNAL,
JackID: 0x02,
.JackType = JACKTYPE_EXTERNAL,
.JackID = 0x02,
JackStrIndex: NO_DESCRIPTOR
.JackStrIndex = NO_DESCRIPTOR
},
MIDI_Out_Jack_Emb:
.MIDI_Out_Jack_Emb =
{
Header: {Size: sizeof(USB_MIDI_Out_Jack_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_OutputJack,
.Header = {.Size = sizeof(USB_MIDI_Out_Jack_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_OutputJack,
JackType: JACKTYPE_EMBEDDED,
JackID: 0x03,
.JackType = JACKTYPE_EMBEDDED,
.JackID = 0x03,
NumberOfPins: 1,
SourceJackID: {0x02},
SourcePinID: {0x01},
.NumberOfPins = 1,
.SourceJackID = {0x02},
.SourcePinID = {0x01},
JackStrIndex: NO_DESCRIPTOR
.JackStrIndex = NO_DESCRIPTOR
},
MIDI_Out_Jack_Ext:
.MIDI_Out_Jack_Ext =
{
Header: {Size: sizeof(USB_MIDI_Out_Jack_t), Type: DTYPE_AudioInterface},
Subtype: DSUBTYPE_OutputJack,
.Header = {.Size = sizeof(USB_MIDI_Out_Jack_t), .Type = DTYPE_AudioInterface},
.Subtype = DSUBTYPE_OutputJack,
JackType: JACKTYPE_EXTERNAL,
JackID: 0x04,
.JackType = JACKTYPE_EXTERNAL,
.JackID = 0x04,
NumberOfPins: 1,
SourceJackID: {0x01},
SourcePinID: {0x01},
.NumberOfPins = 1,
.SourceJackID = {0x01},
.SourcePinID = {0x01},
JackStrIndex: NO_DESCRIPTOR
.JackStrIndex = NO_DESCRIPTOR
},
MIDI_In_Jack_Endpoint:
.MIDI_In_Jack_Endpoint =
{
Endpoint:
.Endpoint =
{
Header: {Size: sizeof(USB_AudioStreamEndpoint_Std_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_AudioStreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | MIDI_STREAM_OUT_EPNUM),
Attributes: (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
EndpointSize: MIDI_STREAM_EPSIZE,
PollingIntervalMS: 0
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | MIDI_STREAM_OUT_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
.PollingIntervalMS = 0
},
Refresh: 0,
SyncEndpointNumber: 0
.Refresh = 0,
.SyncEndpointNumber = 0
},
MIDI_In_Jack_Endpoint_SPC:
.MIDI_In_Jack_Endpoint_SPC =
{
Header: {Size: sizeof(USB_MIDI_Jack_Endpoint_t), Type: DTYPE_AudioEndpoint},
Subtype: DSUBTYPE_General,
.Header = {.Size = sizeof(USB_MIDI_Jack_Endpoint_t), .Type = DTYPE_AudioEndpoint},
.Subtype = DSUBTYPE_General,
TotalEmbeddedJacks: 0x01,
AssociatedJackID: {0x01}
.TotalEmbeddedJacks = 0x01,
.AssociatedJackID = {0x01}
},
MIDI_Out_Jack_Endpoint:
.MIDI_Out_Jack_Endpoint =
{
Endpoint:
.Endpoint =
{
Header: {Size: sizeof(USB_AudioStreamEndpoint_Std_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_AudioStreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | MIDI_STREAM_IN_EPNUM),
Attributes: (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
EndpointSize: MIDI_STREAM_EPSIZE,
PollingIntervalMS: 0
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MIDI_STREAM_IN_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MIDI_STREAM_EPSIZE,
.PollingIntervalMS = 0
},
Refresh: 0,
SyncEndpointNumber: 0
.Refresh = 0,
.SyncEndpointNumber = 0
},
MIDI_Out_Jack_Endpoint_SPC:
.MIDI_Out_Jack_Endpoint_SPC =
{
Header: {Size: sizeof(USB_MIDI_Jack_Endpoint_t), Type: DTYPE_AudioEndpoint},
Subtype: DSUBTYPE_General,
.Header = {.Size = sizeof(USB_MIDI_Jack_Endpoint_t), .Type = DTYPE_AudioEndpoint},
.Subtype = DSUBTYPE_General,
TotalEmbeddedJacks: 0x01,
AssociatedJackID: {0x03}
.TotalEmbeddedJacks = 0x01,
.AssociatedJackID = {0x03}
}
};
@ -249,9 +249,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -260,9 +260,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -271,9 +271,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(14), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(14), .Type = DTYPE_String},
UnicodeString: L"LUFA MIDI Demo"
.UnicodeString = L"LUFA MIDI Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_MIDI_Task , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_MIDI_Task , .TaskStatus = TASK_STOP },
};
/** Main program entry point. This routine configures the hardware required by the application, then

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2045,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2045,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: 0x03,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = 0x03,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,55 +71,55 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: USB_CONFIG_ATTR_BUSPOWERED,
.ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED,
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
Interface:
.Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x08,
SubClass: 0x06,
Protocol: 0x50,
.Class = 0x08,
.SubClass = 0x06,
.Protocol = 0x50,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
DataInEndpoint:
.DataInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | MASS_STORAGE_IN_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: MASS_STORAGE_IO_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MASS_STORAGE_IN_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
.PollingIntervalMS = 0x00
},
DataOutEndpoint:
.DataOutEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: MASS_STORAGE_IO_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
.PollingIntervalMS = 0x00
}
};
@ -129,9 +129,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -140,9 +140,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -151,9 +151,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(22), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String},
UnicodeString: L"LUFA Mass Storage Demo"
.UnicodeString = L"LUFA Mass Storage Demo"
};
/** Serial number descriptor string. This is a Unicode string containing a string of HEX characters at least 12
@ -165,9 +165,9 @@ USB_Descriptor_String_t PROGMEM ProductString =
*/
USB_Descriptor_String_t PROGMEM SerialNumberString =
{
Header: {Size: USB_STRING_LEN(12), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(12), .Type = DTYPE_String},
UnicodeString: L"000000000000"
.UnicodeString = L"000000000000"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -40,7 +40,7 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_MassStorage , TaskStatus: TASK_STOP },
{ .Task = USB_MassStorage , .TaskStatus = TASK_STOP },
};
/* Global Variables */
@ -48,7 +48,7 @@ TASK_LIST
CommandBlockWrapper_t CommandBlock;
/** Structure to hold the latest Command Status Wrapper to return to the host, containing the status of the last issued command. */
CommandStatusWrapper_t CommandStatus = { Signature: CSW_SIGNATURE };
CommandStatusWrapper_t CommandStatus = { .Signature = CSW_SIGNATURE };
/** Flag to asynchronously abort any in-progress data transfers upon the reception of a mass storage reset command. */
volatile bool IsMassStoreReset = false;

@ -43,31 +43,31 @@
*/
SCSI_Inquiry_Response_t InquiryData =
{
DeviceType: 0,
PeripheralQualifier: 0,
.DeviceType = 0,
.PeripheralQualifier = 0,
Removable: true,
.Removable = true,
Version: 0,
.Version = 0,
ResponseDataFormat: 2,
NormACA: false,
TrmTsk: false,
AERC: false,
.ResponseDataFormat = 2,
.NormACA = false,
.TrmTsk = false,
.AERC = false,
AdditionalLength: 0x1F,
.AdditionalLength = 0x1F,
SoftReset: false,
CmdQue: false,
Linked: false,
Sync: false,
WideBus16Bit: false,
WideBus32Bit: false,
RelAddr: false,
.SoftReset = false,
.CmdQue = false,
.Linked = false,
.Sync = false,
.WideBus16Bit = false,
.WideBus32Bit = false,
.RelAddr = false,
VendorID: "LUFA",
ProductID: "Dataflash Disk",
RevisionID: {'0','.','0','0'},
.VendorID = "LUFA",
.ProductID = "Dataflash Disk",
.RevisionID = {'0','.','0','0'},
};
/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
@ -75,8 +75,8 @@ SCSI_Inquiry_Response_t InquiryData =
*/
SCSI_Request_Sense_Response_t SenseData =
{
ResponseCode: 0x70,
AdditionalLength: 0x0A,
.ResponseCode = 0x70,
.AdditionalLength = 0x0A,
};

@ -80,24 +80,24 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2041,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2041,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -107,56 +107,56 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
Interface:
.Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0x00,
AlternateSetting: 0x00,
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x03,
SubClass: 0x01,
Protocol: 0x02,
.Class = 0x03,
.SubClass = 0x01,
.Protocol = 0x02,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
MouseHID:
.MouseHID =
{
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
.Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
HIDSpec: VERSION_BCD(01.11),
CountryCode: 0x00,
TotalHIDReports: 0x01,
HIDReportType: DTYPE_Report,
HIDReportLength: sizeof(MouseReport)
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalHIDReports = 0x01,
.HIDReportType = DTYPE_Report,
.HIDReportLength = sizeof(MouseReport)
},
MouseEndpoint:
.MouseEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | MOUSE_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: MOUSE_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MOUSE_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = MOUSE_EPSIZE,
.PollingIntervalMS = 0x02
}
};
@ -166,9 +166,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -177,9 +177,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -188,9 +188,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(15), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String},
UnicodeString: L"LUFA Mouse Demo"
.UnicodeString = L"LUFA Mouse Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -40,11 +40,11 @@
TASK_LIST
{
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
#endif
#if !defined(INTERRUPT_DATA_ENDPOINT)
{ Task: USB_Mouse_Report , TaskStatus: TASK_STOP },
{ .Task = USB_Mouse_Report , .TaskStatus = TASK_STOP },
#endif
};

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x02,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x02,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x204C,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x204C,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,113 +71,113 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 2,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
CCI_Interface:
.CCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x02,
SubClass: 0x02,
Protocol: 0xFF,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0xFF,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
CDC_Functional_Header:
.CDC_Functional_Header =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x00,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x00,
Data: {0x01, 0x10}
.Data = {0x01, 0x10}
},
CDC_Functional_CallManagement:
.CDC_Functional_CallManagement=
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x01,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x01,
Data: {0x00, 0x00}
.Data = {0x00, 0x00}
},
CDC_Functional_AbstractControlManagement:
.CDC_Functional_AbstractControlManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), Type: 0x24},
SubType: 0x02,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
.SubType = 0x02,
Data: {0x00}
.Data = {0x00}
},
CDC_Functional_Union:
.CDC_Functional_Union =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x06,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x06,
Data: {0x00, 0x01}
.Data = {0x00, 0x01}
},
ManagementEndpoint:
.ManagementEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: CDC_NOTIFICATION_EPSIZE,
PollingIntervalMS: 0x02
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0x02
},
DCI_Interface:
.DCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x0A,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
DataOutEndpoint:
.DataOutEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
DataInEndpoint:
.DataInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
}
};
@ -187,9 +187,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -198,9 +198,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -209,9 +209,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(19), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String},
UnicodeString: L"LUFA RNDIS CDC Demo"
.UnicodeString = L"LUFA RNDIS CDC Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -39,10 +39,10 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: Ethernet_Task , TaskStatus: TASK_STOP },
{ Task: TCP_Task , TaskStatus: TASK_STOP },
{ Task: RNDIS_Task , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = Ethernet_Task , .TaskStatus = TASK_STOP },
{ .Task = TCP_Task , .TaskStatus = TASK_STOP },
{ .Task = RNDIS_Task , .TaskStatus = TASK_STOP },
};
/** Main program entry point. This routine configures the hardware required by the application, then
@ -245,11 +245,11 @@ TASK(RNDIS_Task)
{
USB_Notification_t Notification = (USB_Notification_t)
{
bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
bNotification: NOTIF_RESPONSE_AVAILABLE,
wValue: 0,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
.bNotification = NOTIF_RESPONSE_AVAILABLE,
.wValue = 0,
.wIndex = 0,
.wLength = 0,
};
/* Indicate that a message response is ready for the host */

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x02,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x02,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2044,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2044,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,113 +71,113 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 2,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 2,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
CCI_Interface:
.CCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0,
AlternateSetting: 0,
.InterfaceNumber = 0,
.AlternateSetting = 0,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x02,
SubClass: 0x02,
Protocol: 0x01,
.Class = 0x02,
.SubClass = 0x02,
.Protocol = 0x01,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
CDC_Functional_IntHeader:
.CDC_Functional_IntHeader =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x00,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x00,
Data: {0x01, 0x10}
.Data = {0x01, 0x10}
},
CDC_Functional_CallManagement:
.CDC_Functional_CallManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x01,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x01,
Data: {0x03, 0x01}
.Data = {0x03, 0x01}
},
CDC_Functional_AbstractControlManagement:
.CDC_Functional_AbstractControlManagement =
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), Type: 0x24},
SubType: 0x02,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
.SubType = 0x02,
Data: {0x06}
.Data = {0x06}
},
CDC_Functional_Union:
.CDC_Functional_Union=
{
Header: {Size: sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), Type: 0x24},
SubType: 0x06,
.Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
.SubType = 0x06,
Data: {0x00, 0x01}
.Data = {0x00, 0x01}
},
ManagementEndpoint:
.ManagementEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: CDC_NOTIFICATION_EPSIZE,
PollingIntervalMS: 0xFF
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = CDC_NOTIFICATION_EPSIZE,
.PollingIntervalMS = 0xFF
},
DCI_Interface:
.DCI_Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 2,
.TotalEndpoints = 2,
Class: 0x0A,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0x0A,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
DataOutEndpoint:
.DataOutEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS = 0x00
},
DataInEndpoint:
.DataInEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
Attributes: EP_TYPE_BULK,
EndpointSize: CDC_TXRX_EPSIZE,
PollingIntervalMS: 0x00
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.Attributes = EP_TYPE_BULK,
.EndpointSize = CDC_TXRX_EPSIZE,
.PollingIntervalMS= 0x00
}
};
@ -187,9 +187,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -198,9 +198,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -209,9 +209,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(19), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String},
UnicodeString: L"LUFA USB-RS232 Demo"
.UnicodeString = L"LUFA USB-RS232 Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -33,8 +33,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: CDC_Task , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = CDC_Task , .TaskStatus = TASK_STOP },
};
/* Globals: */
@ -43,10 +43,10 @@ TASK_LIST
* These values are set by the host via a class-specific request, and the physical USART should be reconfigured to match the
* new settings each time they are changed by the host.
*/
CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
ParityType: Parity_None,
DataBits: 8 };
CDC_Line_Coding_t LineCoding = { .BaudRateBPS = 9600,
.CharFormat = OneStopBit,
.ParityType = Parity_None,
.DataBits = 8 };
/** Ring (circular) buffer to hold the RX data - data from the host to the attached device on the serial port. */
RingBuff_t Rx_Buffer;
@ -224,11 +224,11 @@ TASK(CDC_Task)
USB_Notification_Header_t Notification = (USB_Notification_Header_t)
{
NotificationType: (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
Notification: NOTIF_SerialState,
wValue: 0,
wIndex: 0,
wLength: sizeof(uint16_t),
.NotificationType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
.Notification = NOTIF_SerialState,
.wValue = 0,
.wIndex = 0,
.wLength = sizeof(uint16_t),
};
uint16_t LineStateMask;
@ -244,6 +244,7 @@ TASK(CDC_Task)
/* Select the Serial Rx Endpoint */
Endpoint_SelectEndpoint(CDC_RX_EPNUM);
/* Check to see if a packet has been received from the host */
if (Endpoint_IsOUTReceived())
{
/* Read the bytes in from the endpoint into the buffer while space is available */

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_CDC_Host , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_CDC_Host , .TaskStatus = TASK_STOP },
};
@ -183,11 +183,11 @@ TASK(USB_CDC_Host)
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_HID_Host , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_HID_Host , .TaskStatus = TASK_STOP },
};
@ -259,11 +259,11 @@ void WriteNextReport(uint8_t* ReportOUTData, uint8_t ReportIndex, uint8_t Report
/* Class specific request to send a HID report to the device */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
bRequest: REQ_SetReport,
wValue: ((ReportType << 8) | ReportIndex),
wIndex: 0,
wLength: ReportLength,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SetReport,
.wValue = ((ReportType << 8) | ReportIndex),
.wIndex = 0,
.wLength = ReportLength,
};
/* Select the control pipe for the request transfer */
@ -288,11 +288,11 @@ TASK(USB_HID_Host)
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Keyboard_Host , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Keyboard_Host , .TaskStatus = TASK_STOP },
};
@ -255,11 +255,11 @@ TASK(USB_Keyboard_Host)
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
@ -305,11 +305,11 @@ TASK(USB_Keyboard_Host)
/* HID class request to set the keyboard protocol to the Boot Protocol */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
bRequest: REQ_SetProtocol,
wValue: 0,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SetProtocol,
.wValue = 0,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */

@ -49,11 +49,11 @@ uint8_t GetHIDReportData(void)
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
bRequest: REQ_GetDescriptor,
wValue: (DTYPE_Report << 8),
wIndex: 0,
wLength: HIDReportSize,
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Report << 8),
.wIndex = 0,
.wLength = HIDReportSize,
};
/* Select the control pipe for the request transfer */

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Keyboard_Host , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Keyboard_Host , .TaskStatus = TASK_STOP },
};
@ -186,11 +186,11 @@ TASK(USB_Keyboard_Host)
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_MassStore_Host , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_MassStore_Host , .TaskStatus = TASK_STOP },
};
/* Globals */
@ -157,11 +157,11 @@ TASK(USB_MassStore_Host)
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */

@ -252,11 +252,11 @@ uint8_t MassStore_ClearPipeStall(const uint8_t EndpointNum)
{
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
bRequest: REQ_ClearFeature,
wValue: FEATURE_ENDPOINT_HALT,
wIndex: EndpointNum,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
.bRequest = REQ_ClearFeature,
.wValue = FEATURE_ENDPOINT_HALT,
.wIndex = EndpointNum,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
@ -274,11 +274,11 @@ uint8_t MassStore_MassStorageReset(void)
{
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
bRequest: REQ_MassStorageReset,
wValue: 0,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_MassStorageReset,
.wValue = 0,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
@ -300,11 +300,11 @@ uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex)
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
bRequest: REQ_GetMaxLUN,
wValue: 0,
wIndex: 0,
wLength: 1,
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_GetMaxLUN,
.wValue = 0,
.wIndex = 0,
.wLength = 1,
};
/* Select the control pipe for the request transfer */
@ -337,17 +337,17 @@ uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_
/* Create a CBW with a SCSI command to issue REQUEST SENSE command */
SCSICommandBlock = (CommandBlockWrapper_t)
{
Header:
.Header =
{
Signature: CBW_SIGNATURE,
Tag: MassStore_Tag,
DataTransferLength: sizeof(SCSI_Request_Sense_Response_t),
Flags: COMMAND_DIRECTION_DATA_IN,
LUN: LUNIndex,
SCSICommandLength: 6
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = sizeof(SCSI_Request_Sense_Response_t),
.Flags = COMMAND_DIRECTION_DATA_IN,
.LUN = LUNIndex,
.SCSICommandLength = 6
},
SCSICommandData:
.SCSICommandData =
{
SCSI_CMD_REQUEST_SENSE,
0x00, // Reserved
@ -404,17 +404,17 @@ uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAd
/* Create a CBW with a SCSI command to read in the given blocks from the device */
SCSICommandBlock = (CommandBlockWrapper_t)
{
Header:
.Header =
{
Signature: CBW_SIGNATURE,
Tag: MassStore_Tag,
DataTransferLength: ((uint32_t)Blocks * BlockSize),
Flags: COMMAND_DIRECTION_DATA_IN,
LUN: LUNIndex,
SCSICommandLength: 10
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = ((uint32_t)Blocks * BlockSize),
.Flags = COMMAND_DIRECTION_DATA_IN,
.LUN = LUNIndex,
.SCSICommandLength = 10
},
SCSICommandData:
.SCSICommandData =
{
SCSI_CMD_READ_10,
0x00, // Unused (control bits, all off)
@ -475,17 +475,17 @@ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockA
/* Create a CBW with a SCSI command to write the given blocks to the device */
SCSICommandBlock = (CommandBlockWrapper_t)
{
Header:
.Header =
{
Signature: CBW_SIGNATURE,
Tag: MassStore_Tag,
DataTransferLength: ((uint32_t)Blocks * BlockSize),
Flags: COMMAND_DIRECTION_DATA_OUT,
LUN: LUNIndex,
SCSICommandLength: 10
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = ((uint32_t)Blocks * BlockSize),
.Flags = COMMAND_DIRECTION_DATA_OUT,
.LUN = LUNIndex,
.SCSICommandLength = 10
},
SCSICommandData:
.SCSICommandData =
{
SCSI_CMD_WRITE_10,
0x00, // Unused (control bits, all off)
@ -534,17 +534,17 @@ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
/* Create a CBW with a SCSI command to issue TEST UNIT READY command */
SCSICommandBlock = (CommandBlockWrapper_t)
{
Header:
.Header =
{
Signature: CBW_SIGNATURE,
Tag: MassStore_Tag,
DataTransferLength: 0,
Flags: COMMAND_DIRECTION_DATA_IN,
LUN: LUNIndex,
SCSICommandLength: 6
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = 0,
.Flags = COMMAND_DIRECTION_DATA_IN,
.LUN = LUNIndex,
.SCSICommandLength = 6
},
SCSICommandData:
.SCSICommandData =
{
SCSI_CMD_TEST_UNIT_READY,
0x00, // Reserved
@ -583,17 +583,17 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const Ca
/* Create a CBW with a SCSI command to issue READ CAPACITY command */
SCSICommandBlock = (CommandBlockWrapper_t)
{
Header:
.Header =
{
Signature: CBW_SIGNATURE,
Tag: MassStore_Tag,
DataTransferLength: 8,
Flags: COMMAND_DIRECTION_DATA_IN,
LUN: LUNIndex,
SCSICommandLength: 10
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = 8,
.Flags = COMMAND_DIRECTION_DATA_IN,
.LUN = LUNIndex,
.SCSICommandLength = 10
},
SCSICommandData:
.SCSICommandData =
{
SCSI_CMD_READ_CAPACITY_10,
0x00, // Reserved
@ -655,17 +655,17 @@ uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool P
/* Create a CBW with a SCSI command to issue PREVENT ALLOW MEDIUM REMOVAL command */
SCSICommandBlock = (CommandBlockWrapper_t)
{
Header:
.Header =
{
Signature: CBW_SIGNATURE,
Tag: MassStore_Tag,
DataTransferLength: 0,
Flags: COMMAND_DIRECTION_DATA_OUT,
LUN: LUNIndex,
SCSICommandLength: 6
.Signature = CBW_SIGNATURE,
.Tag = MassStore_Tag,
.DataTransferLength = 0,
.Flags = COMMAND_DIRECTION_DATA_OUT,
.LUN = LUNIndex,
.SCSICommandLength = 6
},
SCSICommandData:
.SCSICommandData =
{
SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL,
0x00, // Reserved

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Mouse_Host , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Mouse_Host , .TaskStatus = TASK_STOP },
};
@ -250,11 +250,11 @@ TASK(USB_Mouse_Host)
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
@ -300,11 +300,11 @@ TASK(USB_Mouse_Host)
/* HID class request to set the mouse protocol to the Boot Protocol */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
bRequest: REQ_SetProtocol,
wValue: 0,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SetProtocol,
.wValue = 0,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */

@ -49,11 +49,11 @@ uint8_t GetHIDReportData(void)
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
bRequest: REQ_GetDescriptor,
wValue: (DTYPE_Report << 8),
wIndex: 0,
wLength: HIDReportSize,
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Report << 8),
.wIndex = 0,
.wLength = HIDReportSize,
};
/* Select the control pipe for the request transfer */

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Mouse_Host , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Mouse_Host , .TaskStatus = TASK_STOP },
};
@ -187,11 +187,11 @@ TASK(USB_Mouse_Host)
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */

@ -265,11 +265,11 @@ uint8_t SImage_ClearPipeStall(const uint8_t EndpointNum)
{
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
bRequest: REQ_ClearFeature,
wValue: FEATURE_ENDPOINT_HALT,
wIndex: EndpointNum,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
.bRequest = REQ_ClearFeature,
.wValue = FEATURE_ENDPOINT_HALT,
.wIndex = EndpointNum,
.wLength = 0,
};
/* Select the control pipe for the request transfer */

@ -39,8 +39,8 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_SImage_Host , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_SImage_Host , .TaskStatus = TASK_STOP },
};
@ -153,11 +153,11 @@ TASK(USB_SImage_Host)
/* Standard request to set the device configuration to configuration 1 */
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetConfiguration,
wValue: 1,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = 1,
.wIndex = 0,
.wLength = 0,
};
/* Select the control pipe for the request transfer */
@ -211,11 +211,11 @@ TASK(USB_SImage_Host)
PIMA_SendBlock = (PIMA_Container_t)
{
DataLength: PIMA_COMMAND_SIZE(0),
Type: CType_CommandBlock,
Code: PIMA_OPERATION_GETDEVICEINFO,
TransactionID: 0x00000000,
Params: {},
.DataLength = PIMA_COMMAND_SIZE(0),
.Type = CType_CommandBlock,
.Code = PIMA_OPERATION_GETDEVICEINFO,
.TransactionID = 0x00000000,
.Params = {},
};
/* Send the GETDEVICEINFO block */
@ -290,11 +290,11 @@ TASK(USB_SImage_Host)
PIMA_SendBlock = (PIMA_Container_t)
{
DataLength: PIMA_COMMAND_SIZE(1),
Type: CType_CommandBlock,
Code: PIMA_OPERATION_OPENSESSION,
TransactionID: 0x00000000,
Params: {0x00000001},
.DataLength = PIMA_COMMAND_SIZE(1),
.Type = CType_CommandBlock,
.Code = PIMA_OPERATION_OPENSESSION,
.TransactionID = 0x00000000,
.Params = {0x00000001},
};
/* Send the OPENSESSION block, open a session with an ID of 0x0001 */
@ -318,11 +318,11 @@ TASK(USB_SImage_Host)
PIMA_SendBlock = (PIMA_Container_t)
{
DataLength: PIMA_COMMAND_SIZE(1),
Type: CType_CommandBlock,
Code: PIMA_OPERATION_CLOSESESSION,
TransactionID: 0x00000001,
Params: {0x00000001},
.DataLength = PIMA_COMMAND_SIZE(1),
.Type = CType_CommandBlock,
.Code = PIMA_OPERATION_CLOSESESSION,
.TransactionID = 0x00000001,
.Params = {0x00000001},
};
/* Send the CLOSESESSION block, close the session with an ID of 0x0001 */

@ -44,24 +44,24 @@
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2040,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2040,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -71,37 +71,37 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: ( sizeof(USB_Descriptor_Configuration_Header_t)
.TotalConfigurationSize = ( sizeof(USB_Descriptor_Configuration_Header_t)
+ sizeof(USB_Descriptor_Interface_t) ),
TotalInterfaces: 1,
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
Interface:
.Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 1,
AlternateSetting: 0,
.InterfaceNumber = 1,
.AlternateSetting = 0,
TotalEndpoints: 0,
.TotalEndpoints = 0,
Class: 0xFF,
SubClass: 0x00,
Protocol: 0x00,
.Class = 0xFF,
.SubClass = 0x00,
.Protocol = 0x00,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
};
@ -111,9 +111,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
*/
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -122,9 +122,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
UnicodeString: L"Dean Camera"
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -133,9 +133,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(9), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(9), .Type = DTYPE_String},
UnicodeString: L"LUFA Demo"
.UnicodeString = L"LUFA Demo"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -39,10 +39,10 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: TestApp_CheckJoystick, TaskStatus: TASK_RUN },
{ Task: TestApp_CheckHWB , TaskStatus: TASK_RUN },
{ Task: TestApp_CheckTemp , TaskStatus: TASK_RUN },
{ Task: USB_USBTask , TaskStatus: TASK_RUN },
{ .Task = TestApp_CheckJoystick, .TaskStatus = TASK_RUN },
{ .Task = TestApp_CheckHWB , .TaskStatus = TASK_RUN },
{ .Task = TestApp_CheckTemp , .TaskStatus = TASK_RUN },
{ .Task = USB_USBTask , .TaskStatus = TASK_RUN },
};
/** Main program entry point. This routine configures the hardware required by the application, then

@ -55,6 +55,7 @@
* - Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman)
* - Capitalised the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and
* DSearch_Comp_Return_ErrorCodes_t enums
* - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander)
*
*
* \section Sec_ChangeLog090401 Version 090401

@ -37,11 +37,11 @@ uint8_t USB_GetDeviceConfigDescriptor(uint16_t* const ConfigSizePtr, void* Buffe
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_GetDescriptor,
wValue: (DTYPE_Configuration << 8),
wIndex: 0,
wLength: sizeof(USB_Descriptor_Configuration_Header_t),
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Configuration << 8),
.wIndex = 0,
.wLength = sizeof(USB_Descriptor_Configuration_Header_t),
};
Pipe_SelectPipe(PIPE_CONTROLPIPE);

@ -171,11 +171,11 @@ static void USB_HostTask(void)
case HOST_STATE_Default:
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_GetDescriptor,
wValue: (DTYPE_Device << 8),
wIndex: 0,
wLength: PIPE_CONTROLPIPE_DEFAULT_SIZE,
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Device << 8),
.wIndex = 0,
.wLength = PIPE_CONTROLPIPE_DEFAULT_SIZE,
};
uint8_t DataBuffer[PIPE_CONTROLPIPE_DEFAULT_SIZE];
@ -216,11 +216,11 @@ static void USB_HostTask(void)
USB_HostRequest = (USB_Host_Request_Header_t)
{
bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_SetAddress,
wValue: USB_HOST_DEVICEADDRESS,
wIndex: 0,
wLength: 0,
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetAddress,
.wValue = USB_HOST_DEVICEADDRESS,
.wIndex = 0,
.wLength = 0,
};
if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)

@ -805,8 +805,8 @@
*
* \ingroup Group_PipeRW
*/
static inline void Pipe_Ignore_DWord(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Ignore_DWord(void)
static inline void Pipe_Discard_DWord(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Discard_DWord(void)
{
uint8_t Dummy;
@ -854,8 +854,6 @@
/** Spinloops until the currently selected non-control pipe is ready for the next packed of data
* to be read or written to it.
*
* \note This routine should not be called on CONTROL type pipes.
*
* \ingroup Group_PipeRW
*
* \return A value from the Pipe_WaitUntilReady_ErrorCodes_t enum.

@ -38,8 +38,8 @@ struct
uint8_t Mem_Block_Flags[(NUM_BLOCKS / 4) + ((NUM_BLOCKS % 4) ? 1 : 0)];
uint8_t FlagMaskLookupMask[4];
uint8_t FlagMaskLookupNum[4];
} Mem_MemData = {FlagMaskLookupMask: {(3 << 0), (3 << 2), (3 << 4), (3 << 6)},
FlagMaskLookupNum: { 0, 2, 4, 6}};
} Mem_MemData = {.FlagMaskLookupMask = {(3 << 0), (3 << 2), (3 << 4), (3 << 6)},
.FlagMaskLookupNum = { 0, 2, 4, 6}};
static uint8_t Mem_GetBlockFlags(const Block_Number_t BlockNum)
{

@ -54,7 +54,8 @@
* - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as Pipe_Read_Word()) have
* been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.
* - The Host_IsResetBusDone() macro has been renamed to Host_IsBusResetComplete().
* - The Pipe_Ignore_Word() function has been renamed to Pipe_Discard_Word() to remain consistent with the rest of the pipe API.
* - The Pipe_Ignore_Word() and Pipe_Ignore_DWord() functions have been renamed to Pipe_Discard_Word() and Pipe_Discard_DWord() to remain
* consistent with the rest of the pipe API.
* - It is no longer needed to manually include the headers from LUFA/Drivers/USB/Class, as they are now included along with the rest
* of the USB headers when LUFA/Drivers/USB/USB.h is included.
* - Functions in the ConfigDescriptor.h header file no longer have "Host_" as part of their names.

@ -55,8 +55,8 @@
*
* TASK_LIST
* {
* { Task: MyTask1, TaskStatus: TASK_RUN, GroupID: 1 },
* { Task: MyTask2, TaskStatus: TASK_RUN, GroupID: 1 },
* { .Task = MyTask1, .TaskStatus = TASK_RUN, .GroupID = 1 },
* { .Task = MyTask2, .TaskStatus = TASK_RUN, .GroupID = 1 },
* }
*
* int main(void)
@ -115,7 +115,7 @@
* \code
* TASK_LIST
* {
* { Task: MyTask1, TaskStatus: TASK_RUN, GroupID: 1 },
* { .Task = MyTask1, .TaskStatus = TASK_RUN, .GroupID = 1 },
* // More task entries here
* }
* \endcode

@ -78,24 +78,24 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
*/
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
USBSpecification: VERSION_BCD(01.10),
Class: 0x00,
SubClass: 0x00,
Protocol: 0x00,
.USBSpecification = VERSION_BCD(01.10),
.Class = 0x00,
.SubClass = 0x00,
.Protocol = 0x00,
Endpoint0Size: 8,
.Endpoint0Size = 8,
VendorID: 0x03EB,
ProductID: 0x2042,
ReleaseNumber: 0x0000,
.VendorID = 0x03EB,
.ProductID = 0x2042,
.ReleaseNumber = 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
SerialNumStrIndex: NO_DESCRIPTOR,
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
NumberOfConfigurations: 1
.NumberOfConfigurations = 1
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
@ -105,56 +105,56 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
*/
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
Config:
.Config =
{
Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
TotalInterfaces: 1,
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
ConfigurationNumber: 1,
ConfigurationStrIndex: NO_DESCRIPTOR,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
.ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
Interface:
.Interface =
{
Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
InterfaceNumber: 0x00,
AlternateSetting: 0x00,
.InterfaceNumber = 0x00,
.AlternateSetting = 0x00,
TotalEndpoints: 1,
.TotalEndpoints = 1,
Class: 0x03,
SubClass: 0x01,
Protocol: 0x01,
.Class = 0x03,
.SubClass = 0x01,
.Protocol = 0x01,
InterfaceStrIndex: NO_DESCRIPTOR
.InterfaceStrIndex = NO_DESCRIPTOR
},
KeyboardHID:
.KeyboardHID =
{
Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
.Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
HIDSpec: VERSION_BCD(01.11),
CountryCode: 0x00,
TotalHIDReports: 0x01,
HIDReportType: DTYPE_Report,
HIDReportLength: sizeof(KeyboardReport)
.HIDSpec = VERSION_BCD(01.11),
.CountryCode = 0x00,
.TotalHIDReports = 0x01,
.HIDReportType = DTYPE_Report,
.HIDReportLength = sizeof(KeyboardReport)
},
KeyboardEndpoint:
.KeyboardEndpoint =
{
Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
Attributes: EP_TYPE_INTERRUPT,
EndpointSize: KEYBOARD_EPSIZE,
PollingIntervalMS: 0x04
.EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
.Attributes = EP_TYPE_INTERRUPT,
.EndpointSize = KEYBOARD_EPSIZE,
.PollingIntervalMS = 0x04
},
};
@ -163,9 +163,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
* via the language ID table available at USB.org what languages the device supports for its string descriptors. */
USB_Descriptor_String_t PROGMEM LanguageString =
{
Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
UnicodeString: {LANGUAGE_ID_ENG}
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
@ -174,9 +174,9 @@ USB_Descriptor_String_t PROGMEM LanguageString =
*/
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
Header: {Size: USB_STRING_LEN(32), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(32), .Type = DTYPE_String},
UnicodeString: L"Dean Camera and Denver Gingerich"
.UnicodeString = L"Dean Camera and Denver Gingerich"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@ -185,9 +185,9 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
*/
USB_Descriptor_String_t PROGMEM ProductString =
{
Header: {Size: USB_STRING_LEN(20), Type: DTYPE_String},
.Header = {.Size = USB_STRING_LEN(20), .Type = DTYPE_String},
UnicodeString: L"Magnetic Card Reader"
.UnicodeString = L"Magnetic Card Reader"
};
/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h

@ -40,9 +40,9 @@
/* Scheduler Task List */
TASK_LIST
{
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
{ Task: USB_Keyboard_Report , TaskStatus: TASK_STOP },
{ Task: Magstripe_Read , TaskStatus: TASK_STOP },
{ .Task = USB_USBTask , .TaskStatus = TASK_STOP },
{ .Task = USB_Keyboard_Report , .TaskStatus = TASK_STOP },
{ .Task = Magstripe_Read , .TaskStatus = TASK_STOP },
};
/* Global Variables */

Loading…
Cancel
Save