William Wilson
7 years ago
committed by
Jack Humbert
parent
8c10b60c5f
commit
38da7795f4
@ -0,0 +1,31 @@
|
||||
#include "chimera_ortho.h"
|
||||
|
||||
void uart_init(void) {
|
||||
SERIAL_UART_INIT();
|
||||
}
|
||||
|
||||
void led_init(void) {
|
||||
DDRD |= (1<<1);
|
||||
PORTD |= (1<<1);
|
||||
DDRF |= (1<<4) | (1<<5);
|
||||
PORTF |= (1<<4) | (1<<5);
|
||||
}
|
||||
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
uart_init();
|
||||
led_init();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
@ -0,0 +1,66 @@
|
||||
#ifndef CHIMERA_ORTHO_H
|
||||
#define CHIMERA_ORTHO_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include "backlight.h"
|
||||
#include <stddef.h>
|
||||
|
||||
#define red_led_off PORTF |= (1<<5)
|
||||
#define red_led_on PORTF &= ~(1<<5)
|
||||
#define blu_led_off PORTF |= (1<<4)
|
||||
#define blu_led_on PORTF &= ~(1<<4)
|
||||
#define grn_led_off PORTD |= (1<<1)
|
||||
#define grn_led_on PORTD &= ~(1<<1)
|
||||
|
||||
#define set_led_off red_led_off; grn_led_off; blu_led_off
|
||||
#define set_led_red red_led_on; grn_led_off; blu_led_off
|
||||
#define set_led_blue red_led_off; grn_led_off; blu_led_on
|
||||
#define set_led_green red_led_off; grn_led_on; blu_led_off
|
||||
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
|
||||
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
|
||||
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
|
||||
#define set_led_white red_led_on; grn_led_on; blu_led_on
|
||||
|
||||
/*
|
||||
#define LED_B 5
|
||||
#define LED_R 6
|
||||
#define LED_G 7
|
||||
|
||||
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
|
||||
#define red_led_on PORTF |= (1<<LED_R)
|
||||
#define red_led_off PORTF &= ~(1<<LED_R)
|
||||
#define grn_led_on PORTF |= (1<<LED_G)
|
||||
#define grn_led_off PORTF &= ~(1<<LED_G)
|
||||
#define blu_led_on PORTF |= (1<<LED_B)
|
||||
#define blu_led_off PORTF &= ~(1<<LED_B)
|
||||
|
||||
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
|
||||
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
|
||||
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
*/
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \
|
||||
k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, \
|
||||
k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42, k43, k44,\
|
||||
k45, k46, k47, k48 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k08, KC_##k09, KC_##k10, KC_##k11, KC_##k12 }, \
|
||||
{ KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26 }, \
|
||||
{ KC_##k29, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k37, KC_##k38, KC_##k41, KC_##k42, KC_##k43 }, \
|
||||
{ KC_NO, KC_##k06, KC_##k20, KC_##k35, KC_##k46, KC_##k47, KC_##k36, KC_##k21, KC_##k07, KC_NO }, \
|
||||
{ KC_NO, KC_##k28, KC_##k14, KC_##k00, KC_##k45, KC_##k48, KC_##k13, KC_##k27, KC_##k44, KC_NO }, \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,87 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER unknown
|
||||
#define PRODUCT Chimera Ortho
|
||||
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ortho
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 10
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
//#define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define ONESHOT_TIMEOUT 500
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
//UART settings for communication with the RF microcontroller
|
||||
#define SERIAL_UART_BAUD 1000000
|
||||
#define SERIAL_UART_DATA UDR1
|
||||
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
|
||||
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
||||
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
|
||||
#define SERIAL_UART_INIT() do { \
|
||||
/* baud rate */ \
|
||||
UBRR1L = SERIAL_UART_UBRR; \
|
||||
/* baud rate */ \
|
||||
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
||||
/* enable TX and RX */ \
|
||||
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
|
||||
/* 8-bit data */ \
|
||||
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
||||
} while(0)
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,193 @@
|
||||
// this is the style you want to emulate.
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
|
||||
#include "chimera_ortho.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum chimera_ortho_layers
|
||||
{
|
||||
_QWERTY,
|
||||
_CAPS,
|
||||
_NUMPAD,
|
||||
_SYMBOLS,
|
||||
_MACROS,
|
||||
_NAV
|
||||
};
|
||||
|
||||
#define KC_NMPD TG(_NUMPAD)
|
||||
#define KC_SYMB TG(_SYMBOLS)
|
||||
#define KC_SPFN LT(_NAV,KC_EQL)
|
||||
#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
|
||||
#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
|
||||
#define KC_SPLT MT(MOD_LALT, KC_MINS)
|
||||
#define KC_SPRT MT(MOD_LALT, KC_1)
|
||||
#define KC_GBRC MT(MOD_RGUI, KC_8)
|
||||
#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
|
||||
#define KC_MESC LT(_MACROS, KC_ESC)
|
||||
#define KC_INCL M(0)
|
||||
#define KC_PULL M(1)
|
||||
#define KC_PUSH M(2)
|
||||
#define KC_SCAP M(3)
|
||||
#define KC_SCOF M(4)
|
||||
#define KC_CAD LALT(LCTL(KC_DEL))
|
||||
|
||||
#define LONGPRESS_DELAY 150
|
||||
//#define LAYER_TOGGLE_DELAY 300
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
#define KC_ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
MESC, Q , W , E , R , T ,SCTL, SCTR, Y , U , I , O , P ,QUOT,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G ,SPLT, SPRT, H , J , K , L ,SCLN,ENT ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSPO, Z , X , C , V , B ,SPFN, GBRC, N , M ,COMM,DOT ,SLSH,RSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
NMPD,BSPC, SPC ,SYMB
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_CAPS] = KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , ,UNDS, , , , , ,COLN, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
SCOF, , , , , , , , , , , , ,SCOF,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , ,
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_NUMPAD] = KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, ,COLN , , , , , , , 7 , 8 , 9 ,ASTR,MINS,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, ,DOT , , , , , , , 4 , 5 , 6 ,PLUS, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , , , 1 , 2 , 3 ,SLSH, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , 0
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_SYMBOLS] = KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, , ,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, F1 , F2 , F3 , F4 , F5 , , ,TILD,COLN,UNDS,LCBR,RCBR, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, F6 , F7 , F8 , F9 ,F10 , , ,GRV ,SCLN,MINS,LBRC,RBRC, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
PIPE, , ,
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_NAV] = KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , , , , , , , , UP , ,PSCR, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , , ,LEFT,DOWN,RGHT, , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , , ,PGUP,PGDN, , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
,DEL , ,
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_MACROS] = KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , , , , , , , ,INCL, , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , ,CAD , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
SCAP, , , , , , , , , ,PULL,PUSH, ,SCAP,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , ,
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
/* include some kind of library or header */
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("#include <>");
|
||||
return MACRO( T(LEFT), END);
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("git pull");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
if (record->event.pressed){
|
||||
SEND_STRING("git push");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
if (record->event.pressed){
|
||||
layer_on(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
case 4:
|
||||
if (record->event.pressed){
|
||||
layer_off(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
switch (layer) {
|
||||
case _QWERTY:
|
||||
set_led_green;
|
||||
break;
|
||||
case _CAPS:
|
||||
set_led_white;
|
||||
break;
|
||||
case _NUMPAD:
|
||||
set_led_blue;
|
||||
break;
|
||||
case _SYMBOLS:
|
||||
set_led_red;
|
||||
break;
|
||||
case _NAV:
|
||||
set_led_magenta;
|
||||
break;
|
||||
case _MACROS:
|
||||
set_led_cyan;
|
||||
break;
|
||||
default:
|
||||
set_led_green;
|
||||
break;
|
||||
}
|
||||
};
|
||||
@ -0,0 +1,164 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako
|
||||
Copyright 2014 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#if defined(__AVR__)
|
||||
#include <avr/io.h>
|
||||
#endif
|
||||
#include "wait.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "timer.h"
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#elif (MATRIX_COLS <= 16)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop16(matrix[i])
|
||||
# define ROW_SHIFTER ((uint16_t)1)
|
||||
#elif (MATRIX_COLS <= 32)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop32(matrix[i])
|
||||
# define ROW_SHIFTER ((uint32_t)1)
|
||||
#endif
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_quantum(void) {
|
||||
matrix_init_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_quantum(void) {
|
||||
matrix_scan_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void) {
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void) {
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void) {
|
||||
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
SERIAL_UART_INIT();
|
||||
|
||||
uint32_t timeout = 0;
|
||||
|
||||
//the s character requests the RF slave to send the matrix
|
||||
SERIAL_UART_DATA = 's';
|
||||
|
||||
//trust the external keystates entirely, erase the last data
|
||||
uint8_t uart_data[11] = {0};
|
||||
|
||||
//there are 10 bytes corresponding to 10 columns, and an end byte
|
||||
for (uint8_t i = 0; i < 11; i++) {
|
||||
//wait for the serial data, timeout if it's been too long
|
||||
//this only happened in testing with a loose wire, but does no
|
||||
//harm to leave it in here
|
||||
while(!SERIAL_UART_RXD_PRESENT){
|
||||
timeout++;
|
||||
if (timeout > 10000){
|
||||
break;
|
||||
}
|
||||
}
|
||||
uart_data[i] = SERIAL_UART_DATA;
|
||||
}
|
||||
|
||||
//check for the end packet, the key state bytes use the LSBs, so 0xE0
|
||||
//will only show up here if the correct bytes were recieved
|
||||
if (uart_data[10] == 0xE0)
|
||||
{
|
||||
//shifting and transferring the keystates to the QMK matrix variable
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
matrix_scan_quantum();
|
||||
return 1;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & ((matrix_row_t)1<col));
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print_matrix_header();
|
||||
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row); print(": ");
|
||||
print_matrix_row(row);
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += matrix_bitpop(i);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
@ -0,0 +1,78 @@
|
||||
|
||||
OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO
|
||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||
CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
|
||||
# # project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB = /dev/ttyACM0
|
||||
Loading…
Reference in new issue