Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.

LUFA/ManPages/LUFAPoweredProjects.txt

@@ -20,10 +20,10 @@
  *
  *  - AVROpendous, an open design/source set of AVR USB development boards: http://avropendous.org/
  *  - Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/blog/feurig/benito_7_the_next_big_thing
- *  - USBFoo, an AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102
+ *  - Bumble-B, yet another AT90USB162 development board: http://fletchtronics.net/
  *  - USB10 AKA "The Ferret", a AT90USB162 development board: http://www.soc-machines.com
+ *  - USBFoo, an AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102
  *  - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
- *  - Bumble-B, yet another AT90USB162 development board: http://fletchtronics.net/
  * 
  *  \section Sec_LUFAProjects Projects Using LUFA (Hobbyist)
  *

Projects/Benito/Benito.c

@@ -45,6 +45,9 @@ volatile uint8_t TxPulseMSRemaining    = 0;
 /** Counter for the number of milliseconds remaining for the RX activity LED pulse being generated. */
 volatile uint8_t RxPulseMSRemaining    = 0;
 
+/** Counter for the number of milliseconds remaining for the enumeration LED ping-pong being generated. */
+volatile uint8_t PingPongMSRemaining   = 0;
+
 /** LUFA CDC Class driver interface configuration and state information. This structure is
  *  passed to all CDC Class driver functions, so that multiple instances of the same class
  *  within a device can be differentiated from one another.
@@ -78,8 +81,6 @@ int main(void)
 {
 	SetupHardware();
 
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-
 	for (;;)
 	{
 		/* Echo bytes from the host to the target via the hardware USART */
@@ -103,9 +104,19 @@ int main(void)
 		/* Check if the millisecond timer has elapsed */
 		if (TIFR0 & (1 << OCF0A))
 		{
+			/* Check if the LEDs should be ping-ponging (during enumeration) */
+			if (PingPongMSRemaining && !(--PingPongMSRemaining))
+			{
+				LEDs_ChangeLEDs(LEDMASK_BUSY, (~LEDs_GetLEDs() & LEDMASK_BUSY));
+				PingPongMSRemaining = PING_PONG_LED_PULSE_MS;
+			}
+		
 			/* Check if the reset pulse period has elapsed, if so tristate the target reset line */
 			if (ResetPulseMSRemaining && !(--ResetPulseMSRemaining))
-			  AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK;
+			{
+				LEDs_TurnOffLEDs(LEDMASK_BUSY);
+				AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK;
+			}
 			
 			/* Turn off TX LED(s) once the TX pulse period has elapsed */
 			if (TxPulseMSRemaining && !(--TxPulseMSRemaining))
@@ -151,22 +162,25 @@ void SetupHardware(void)
 /** Event handler for the library USB Connection event. */
 void EVENT_USB_Connect(void)
 {
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+	PingPongMSRemaining = PING_PONG_LED_PULSE_MS;
+	LEDs_SetAllLEDs(LEDMASK_TX);
 }
 
 /** Event handler for the library USB Disconnection event. */
 void EVENT_USB_Disconnect(void)
 {
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	PingPongMSRemaining = 0;
+	LEDs_TurnOffLEDs(LEDMASK_BUSY);
 }
 
 /** Event handler for the library USB Configuration Changed event. */
 void EVENT_USB_ConfigurationChanged(void)
 {
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+	PingPongMSRemaining = 0;
+	LEDs_TurnOffLEDs(LEDMASK_BUSY);
 
 	if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface)))
-	  LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	  LEDs_TurnOnLEDs(LEDMASK_ERROR);
 }
 
 /** Event handler for the library USB Unhandled Control Packet event. */
@@ -224,6 +238,8 @@ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const C
 	/* Check if the DTR line has been asserted - if so, start the target AVR's reset pulse */
 	if (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR)
 	{
+		LEDs_TurnOnLEDs(LEDMASK_BUSY);
+	
 		AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK;
 		ResetPulseMSRemaining = AVR_RESET_PULSE_MS;
 	}

Projects/Benito/Benito.h

@@ -51,24 +51,16 @@
 		#include <LUFA/Drivers/USB/Class/CDC.h>
 
 	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_NO_LEDS
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED1 | LEDS_LED2)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        LEDS_NO_LEDS
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED2)
-		
 		/** LED mask for the library LED driver, to indicate TX activity. */
 		#define LEDMASK_TX               LEDS_LED1
 
 		/** LED mask for the library LED driver, to indicate RX activity. */
 		#define LEDMASK_RX               LEDS_LED2
 		
+		#define LEDMASK_ERROR            (LEDS_LED1 | LEDS_LED2)
+		
+		#define LEDMASK_BUSY             (LEDS_LED1 | LEDS_LED2)
+
 	/* Function Prototypes: */
 		void SetupHardware(void);
 

Projects/Benito/Benito.txt

@@ -90,5 +90,10 @@
  *    <td>Makefile CDEFS</td>
  *    <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td>
  *   </tr>
+ *   <tr>
+ *    <td>PING_PONG_LED_PULSE_MS</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>Pulse length in milliseconds for the enumeration LED ping-poning between toggles.</td>
+ *   </tr>
  *  </table>
  */

Projects/Benito/makefile

@@ -196,7 +196,8 @@ CDEFS += -DAVR_RESET_LINE_PORT="PORTB"
 CDEFS += -DAVR_RESET_LINE_DDR="DDRB"
 CDEFS += -DAVR_RESET_LINE_MASK="(1 << 0)"
 CDEFS += -DAVR_RESET_PULSE_MS=10
-CDEFS += -DTX_RX_LED_PULSE_MS=10
+CDEFS += -DTX_RX_LED_PULSE_MS=30
+CDEFS += -DPING_PONG_LED_PULSE_MS=100
 
 # Place -D or -U options here for ASM sources
 ADEFS = -DF_CPU=$(F_CPU)