Minor documentation fixes to correct formatting and typos.

LUFA/ChangeLog.txt

@@ -42,7 +42,7 @@
   *  - Removed AVRISP_Programmer project due to code quality concerns
   *  - Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incomming data
   *  - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg)
-  *  - Fixed USBTask.h not conditionally including HostChapter9.h only when CAN_BE_DEVICE is defined (thanks to Ian Gregg)
+  *  - Fixed USBTask.h not conditionally including HostChapter9.h only when USB_CAN_BE_HOST is defined (thanks to Ian Gregg)
   *  - Fixed incorrect ADC driver init register manipulation (thanks to Tobias)
   *  - Added new GenericHID device demo application
   *

LUFA/CompileTimeTokens.txt

@@ -10,6 +10,7 @@
  *  compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour,
  *  or remove features unused by a given application in order to save flash space.
  *
+ *
  *  \section Sec_SummaryNonUSBTokens Non USB Related Tokens
  *  This section describes compile tokens which affect non-USB sections of the LUFA library.
  *
@@ -31,6 +32,7 @@
  *  Sets the maximum number of managed memory handles which can be handed out by the dynamic memory allocation driver
  *  simultaneously, before a handle (and its associated allocated memory) must be freed.
  *
+ *
  *  \section Sec_SummaryUSBClassTokens USB Class Driver Related Tokens
  *  This section describes compile tokens which affect USB class-specific drivers in the LUFA library.
  *
@@ -73,6 +75,7 @@
  *  If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed seperately in the
  *  processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation.
  *
+ *
  *  \section Sec_SummaryUSBTokens USB Driver Related Tokens
  *  This section describes compile tokens which affect USB driver stack as a whole in the LUFA library.
  *

LUFA/Drivers/USB/LowLevel/StreamCallbacks.h

@@ -62,7 +62,7 @@
 			 *
 			 *  //...
 			 *  // Inside some routine:
-			 *  if (Endpoint_Write_CStream_LE(DataBuffer, sizeof(DataBuffer), GlobalNotSet) == 
+			 *  if (Endpoint_Write_Stream_LE(DataBuffer, sizeof(DataBuffer), GlobalNotSet) == 
 			 *                               ENDPOINT_RWSTREAM_ERROR_CallbackAborted)
 			 *  {
 			 *      // Do something when the callback aborted the transfer early
@@ -81,7 +81,7 @@
 			enum StreamCallback_Return_ErrorCodes_t
 			{
 				STREAMCALLBACK_Continue            = 0, /**< Continue sending or receiving the stream. */
-				STREAMCALLBACK_Abort               = 1, /**< Abort the stream send or reciving process. */
+				STREAMCALLBACK_Abort               = 1, /**< Abort the stream send or receiving process. */
 			};
 			
 #endif

LUFA/GettingStarted.txt

@@ -12,12 +12,14 @@
  *  This is due to two reasons; one, it is the hardware the author posesses, and two, it is the most popular Atmel
  *  USB demonstration board to date.
  *
+ *
  *  \section Sec_Prerequisites Prerequisites
  *  Before you can compile any of the LUFA library code or demos, you will need a recent distribution of avr-libc (1.6.2+)
  *  and the AVR-GCC (4.2+) compiler. For Windows users, the best way to obtain these is the WinAVR project
  *  (http://winavr.sourceforge.net) as this provides a single-file setup for everything required to compile your
  *  own AVR projects.
  *
+ *
  *  \section Sec_Configuring Configuring the Demos, Bootloaders and Projects
  *  If the target AVR model, clock speed, board or other settings are different to the current settings, they must be changed
  *  and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project
@@ -84,6 +86,7 @@
  *  interface speed (Low or Full speed) and other LUFA configuration options can be set here - refer to the library documentation for details on the
  *  configuration parameters.
  *
+ *
  *  \section Sec_Compiling Compiling a LUFA Application
  *  Compiling the LUFA demos, applications and/or bootloaders is very simple. LUFA comes with makefile scripts for
  *  each individual demo, bootloader and project folder, as well as scripts in the /Demos/, /Bootloaders/, /Projects/
@@ -104,6 +107,7 @@
  *  in AVRStudio, the project can be built and cleaned using the GUI buttons or menus. Note that the AVRStudio project files make
  *  use of the external project makefile, thus the procedure for configuring a demo remains the same regardless of the build environment.
  *
+ *
  *  \section Sec_Programming Programming a USB AVR
  *  Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your
  *  application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the

LUFA/MainPage.txt

@@ -23,6 +23,7 @@
  *  library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package, 
  *  from the the WinAVR website.
  *
+ *
  *  \section Sec_Links Library Links
  *  Project Homepage: http://www.fourwalledcubicle.com/LUFA.php \n
  *  Development Blog: http://www.fourwalledcubicle.com/blog \n
@@ -35,6 +36,7 @@
  *
  *  USB-IF Website: http://www.usb.org \n
  *
+ *
  *  \section Sec_License License
  *  The LUFA library is currently released under the MIT licence, included below.
  *
@@ -64,6 +66,7 @@
  *  this software.
  *  \endverbatim
  *
+ *
  *  \section Sec_Demos Demos and Bootloaders
  *  The LUFA library ships with several different host and device demos, located in the /Demos/ subdirectory.
  *  If this directory is missing, please re-download the project from the project homepage.
@@ -72,6 +75,7 @@
  *  The DFU class bootloader is compatible with Atmel's FLIP software or the open source dfu-programmer project, and
  *  the CDC class (AVR109 protocol) is compatible with such open source software as AVRDUDE and AVR-OSP.
  *
+ *
  *  \section Sec_Donations Donate
  *  I am a 20 year old University student studying for a double degree in Computer Science and Electronics
  *  Engineering. This leaves little time for any sort of work or leisure. Please consider donating a small amount

LUFA/MigrationInformation.txt

@@ -36,6 +36,7 @@
  *      NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the FEATURELESS_CONTROL_ONLY_DEVICE token with no further
  *      modifications required.
  *
+ *
  * \section Sec_Migration090209 Migrating from 081217 to 090209
  *
  *  <b>Device Mode</b>
@@ -64,6 +65,7 @@
  *    - Most library demos have been enhanced and/or had errors corrected. All users of all demos should upgrade their codebase to
  *      the latest demo versions.
  *
+ *
  * \section Sec_Migration171208 Migrating from V1.5.3 to 081217
  *
  *  <b>All</b>