Short UUIDs are measured in bytes, not bits -- update Service Discovery Protocol code so that it can now correctly match against UUIDs in the service table.

pull/1469/head
Dean Camera 15 years ago
parent 141d94fa98
commit 3e515cdfa8

@ -55,6 +55,8 @@
/** Bluetooth specification defined channel number for connectionless data */
#define BT_CHANNEL_CONNECTIONLESS 0x0002
#define BT_ACL_FIRST_AUTOFLUSH (1 << 13)
#define BT_SIGNAL_COMMAND_REJECT 0x01
#define BT_SIGNAL_CONNECTION_REQUEST 0x02
#define BT_SIGNAL_CONNECTION_RESPONSE 0x03
@ -83,8 +85,6 @@
#define BT_CONFIG_OPTION_MTU 1
#define BT_ACL_FIRST_AUTOFLUSH (1 << 13)
/* Type Defines: */
/** Bluetooth ACL header structure, common to all ACL data packets. */
typedef struct

@ -76,10 +76,17 @@ const ServiceTable_t SDP_Services_Table[] =
},
};
/* Base UUID value common to all standardized Bluetooth services */
/** Base UUID value common to all standardized Bluetooth services */
const uint8_t BaseUUID[] = {BASE_96BIT_UUID, 0x00, 0x00, 0x00, 0x00};
/** Main Service Discovery Protocol packet processing routine. This function processes incomming SDP packets from
* a connected Bluetooth device, and sends back appropriate responses to allow other devices to determine the
* services the local device exposes.
*
* \param[in] Data Incomming packet data containing the SDP request
* \param[in] Channel Channel the request was issued to by the remote device
*/
void ServiceDiscovery_ProcessPacket(void* Data, Bluetooth_Channel_t* Channel)
{
SDP_PDUHeader_t* SDPHeader = (SDP_PDUHeader_t*)Data;
@ -209,7 +216,7 @@ static uint8_t ServiceDiscovery_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES],
uint8_t UUIDLength = ServiceDiscovery_GetDataElementSize(CurrentParameter, &ElementHeaderSize);
memcpy(CurrentUUID, BaseUUID, sizeof(BaseUUID));
memcpy(&CurrentUUID[(UUIDLength <= 32) ? (sizeof(BaseUUID) - 32) : 0], *CurrentParameter, UUIDLength);
memcpy(&CurrentUUID[(UUIDLength <= 4) ? (UUID_SIZE_BYTES - 4) : 0], *CurrentParameter, UUIDLength);
BT_SDP_DEBUG(2, "-- UUID (%d): 0x%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X",
UUIDLength,

@ -59,7 +59,10 @@
#define SDP_ATTRIBUTE_PROVIDER 0x0002
#define SDP_ATTRIBUTE_AVAILABILITY 0x0008
/** Size of a full 128 bit UUID, in bytes */
#define UUID_SIZE_BYTES 16
/** First 96 bits common to all standadized Bluetooth services */
#define BASE_96BIT_UUID 0xFB, 0x34, 0x9B, 0x5F, 0x80, 0x00, 0x00, 0x80, 0x00, 0x10, 0x00, 0x00
/** Defines a service attribute as a string of characters.

@ -115,7 +115,7 @@
* <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>
*
* \section Sec_PDI PDI Connections
* Connections to the device for PDI programming<b><sup>1</sup></b> (when enabled):
* Connections to the device for PDI programming (when enabled):
*
* <table>
* <tr>
@ -159,7 +159,7 @@
* <b><sup>2</sup></b> <i>The AVR's Tx and Rx become the DATA line when connected together via a pair of 220 ohm resistors</i> \n
*
* \section Sec_TPI TPI Connections
* Connections to the device for TPI programming<b><sup>1</sup></b> (when enabled):
* Connections to the device for TPI programming (when enabled):
*
* <table>
* <tr>
@ -241,7 +241,8 @@
* <tr>
* <td>VTARGET_ADC_CHANNEL</td>
* <td>Makefile CDEFS</td>
* <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.</td>
* <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.
* <i>Ignored when compiled for targets lacking an ADC.</i></td>
* </tr>
* <tr>
* <td>ENABLE_ISP_PROTOCOL</td>
@ -257,7 +258,8 @@
* <td>NO_VTARGET_DETECT</td>
* <td>Makefile CDEFS</td>
* <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer
* to report a fixed 5V target voltage to the host regardless of the real target voltage.</td>
* to report a fixed 5V target voltage to the host regardless of the real target voltage. <i>Ignored when compiled for
* targets lacking an ADC.</i></td>
* </tr>
* <tr>
* <td>LIBUSB_DRIVER_COMPAT</td>

Loading…
Cancel
Save