Remove potentially unaligned uint32_t access in HIDParser.c, replace with standard C bit shifts.

LUFA/DoxygenPages/ChangeLog.txt

@@ -7,7 +7,23 @@
  /** \page Page_ChangeLog Project Changelog
   *
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX
-  *  None.
+  *  <b>New:</b>
+  *  - Core:
+  *   - None
+  *  - Library Applications:
+  *   - None
+  *
+  *  <b>Changed:</b>
+  *  - Core:
+  *   - Android Accessory Host property strings changed from a struct of pointer to an array to prevent unaligned access on greater than 8-bit architectures
+  *  - Library Applications:
+  *   - None
+  *
+  *  <b>Fixed:</b>
+  *  - Core:
+  *   - None
+  *  - Library Applications:
+  *   - None
   *
   *  \section Sec_ChangeLog120219 Version 120219
   *  <b>New:</b>

LUFA/DoxygenPages/MigrationInformation.txt

@@ -11,7 +11,9 @@
  *  areas relevant to making older projects compatible with the API changes of each new release.
  *
  *  \section Sec_MigrationXXXXXX Migrating from 120219 to XXXXXX
- *  None.
+ *  <b>Host Mode</b>
+ *    - The Android Accessory Host class driver property strings are now a array of \c char* rather than a struct of named pointers. Existing applications
+ *      should use C99 Designated Initializers with the property string indexes located in \ref AOA_Strings_t instead.
  *
  *  \section Sec_Migration120219 Migrating from 111009 to 120219
  *  <b>USB Core</b>

LUFA/Drivers/USB/Class/Common/HIDParser.c

@@ -61,17 +61,18 @@ uint8_t USB_ProcessHIDReport(const uint8_t* ReportData,
 		switch (HIDReportItem & HID_RI_DATA_SIZE_MASK)
 		{
 			case HID_RI_DATA_BITS_32:
-				ReportItemData  = le32_to_cpu(*((uint32_t*)ReportData));
+				ReportItemData  = (((uint32_t)ReportData[3] << 24) | ((uint32_t)ReportData[2] << 16) |
+			                       ((uint16_t)ReportData[1] << 8)  | ReportData[0]);
 				ReportSize     -= 4;
 				ReportData     += 4;
 				break;
 			case HID_RI_DATA_BITS_16:
-				ReportItemData  = le16_to_cpu(*((uint16_t*)ReportData));
+				ReportItemData  = (((uint16_t)ReportData[1] << 8) | (ReportData[0]));
 				ReportSize     -= 2;
 				ReportData     += 2;
 				break;
 			case HID_RI_DATA_BITS_8:
-				ReportItemData  = *((uint8_t*)ReportData);
+				ReportItemData  = ReportData[0];
 				ReportSize     -= 1;
 				ReportData     += 1;
 				break;

LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c

@@ -233,7 +233,7 @@ static uint8_t AOA_Host_GetAccessoryProtocol(uint16_t* const Protocol)
 static uint8_t AOA_Host_SendPropertyString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
                                            const uint8_t StringIndex)
 {	
-	const char* String = ((char**)&AOAInterfaceInfo->Config.PropertyStrings)[StringIndex];
+	const char* String = AOAInterfaceInfo->Config.PropertyStrings[StringIndex];
 	
 	if (String == NULL)
 	  String = "";

LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h

@@ -91,16 +91,8 @@
 					uint8_t  DataOUTPipeNumber; /**< Pipe number of the AOA interface's OUT data pipe. */
 					bool     DataOUTPipeDoubleBank; /**< Indicates if the AOA interface's OUT data pipe should use double banking. */
 					
-					struct
+					char*    PropertyStrings[AOA_STRING_TOTAL_STRINGS]; /**< Android Accessory property strings, sent to identify the accessory when the
-					{
+					                                                     *   Android device is switched into Open Accessory mode. */
-						char* Manufacturer; /**< Device manufacturer string. */
-						char* Model; /**< Device model name string. */
-						char* Description; /**< Device description string. */
-						char* Version; /**< Device version string. */
-						char* URI; /**< Device URI information string. */
-						char* Serial; /**< Device serial number string. */
-					} ATTR_PACKED PropertyStrings; /**< Android Accessory property strings, sent to identify the accessory when the
-					                                *   Android device is switched into Open Accessory mode. */
 				} Config; /**< Config data for the USB class interface within the device. All elements in this section
 				           *   <b>must</b> be set or the interface will fail to enumerate and operate correctly.
 				           */

LUFA/Drivers/USB/Class/Host/PrinterClassHost.c

@@ -278,7 +278,7 @@ uint8_t PRNT_Host_SendByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
 }
 
 uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
-                             void* String)
+                             const char* const String)
 {
 	uint8_t ErrorCode;
 

LUFA/Drivers/USB/Class/Host/PrinterClassHost.h

@@ -190,7 +190,7 @@
 			 *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
 			 */
 			uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
-			                             void* String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+			                             const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 
 			/** Sends the given raw data stream to the attached printer's input endpoint. This should contain commands that the
 			 *  printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see

LUFA/Drivers/USB/Core/HostStandardReq.c

@@ -38,17 +38,16 @@
 
 uint8_t USB_Host_ConfigurationNumber;
 
-uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
+static uint8_t USB_Host_SendControlRequest_PRV(void* const BufferPtr)
 {
 	uint8_t* DataStream   = (uint8_t*)BufferPtr;
-	bool     BusSuspended = USB_Host_IsBusSuspended();
 	uint8_t  ReturnStatus = HOST_SENDCONTROL_Successful;
 	uint16_t DataLen      = USB_ControlRequest.wLength;
 
 	USB_Host_ResumeBus();
 
 	if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
-	  goto End_Of_Control_Send;
+	  return ReturnStatus;
 
 	Pipe_SetPipeToken(PIPE_TOKEN_SETUP);
 	Pipe_ClearError();
@@ -71,12 +70,12 @@ uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
 	Pipe_ClearSETUP();
 
 	if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_SetupSent)) != HOST_SENDCONTROL_Successful)
-	  goto End_Of_Control_Send;
+	  return ReturnStatus;
 
 	Pipe_Freeze();
 
 	if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
-	  goto End_Of_Control_Send;
+	  return ReturnStatus;
 
 	if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_DIRECTION) == REQDIR_DEVICETOHOST)
 	{
@@ -89,7 +88,7 @@ uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
 				Pipe_Unfreeze();
 
 				if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful)
-				  goto End_Of_Control_Send;
+				  return ReturnStatus;
 
 				if (!(Pipe_BytesInPipe()))
 				  DataLen = 0;
@@ -109,12 +108,12 @@ uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
 		Pipe_Unfreeze();
 
 		if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
-		  goto End_Of_Control_Send;
+		  return ReturnStatus;
 
 		Pipe_ClearOUT();
 
 		if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
-		  goto End_Of_Control_Send;
+		  return ReturnStatus;
 	}
 	else
 	{
@@ -126,7 +125,7 @@ uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
 			while (DataLen)
 			{
 				if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
-				  goto End_Of_Control_Send;
+				  return ReturnStatus;
 
 				while (DataLen && (Pipe_BytesInPipe() < USB_Host_ControlPipeSize))
 				{
@@ -138,7 +137,7 @@ uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
 			}
 
 			if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
-			  goto End_Of_Control_Send;
+			  return ReturnStatus;
 
 			Pipe_Freeze();
 		}
@@ -147,19 +146,11 @@ uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
 		Pipe_Unfreeze();
 
 		if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful)
-		  goto End_Of_Control_Send;
+		  return ReturnStatus;
 
 		Pipe_ClearIN();
 	}
-
+	
-End_Of_Control_Send:
-	Pipe_Freeze();
-
-	if (BusSuspended)
-	  USB_Host_SuspendBus();
-
-	Pipe_ResetPipe(PIPE_CONTROLPIPE);
-
 	return ReturnStatus;
 }
 
@@ -187,6 +178,21 @@ static uint8_t USB_Host_WaitForIOS(const uint8_t WaitType)
 	return HOST_SENDCONTROL_Successful;
 }
 
+uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
+{
+	bool BusSuspended    = USB_Host_IsBusSuspended();
+	uint8_t ReturnStatus = USB_Host_SendControlRequest_PRV(BufferPtr);
+
+	Pipe_Freeze();
+
+	if (BusSuspended)
+	  USB_Host_SuspendBus();
+
+	Pipe_ResetPipe(PIPE_CONTROLPIPE);
+
+	return ReturnStatus;
+}
+
 uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber)
 {
 	uint8_t ErrorCode;

LUFA/Drivers/USB/Core/HostStandardReq.h

@@ -278,6 +278,7 @@
 
 		/* Function Prototypes: */
 			#if defined(__INCLUDE_FROM_HOSTSTDREQ_C)
+				static uint8_t USB_Host_SendControlRequest_PRV(void* const BufferPtr);
 				static uint8_t USB_Host_WaitForIOS(const uint8_t WaitType);
 			#endif
 	#endif