Fix TPI NVM Write handler -- AVRStudio sends out writes in page sized chunks, not byte sized chunks.

Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c

@@ -119,14 +119,13 @@ bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_
 
 /** Writes byte addressed memory to the target's memory spaces.
  *
- *  \param[in]  WriteCommand  Command to send to the device to write each memory byte
  *  \param[in]  WriteAddress  Start address to write to within the target's address space
  *  \param[in]  WriteBuffer   Buffer to source data from
- *
+ *  \param[in]  WriteLength   Total number of bytes to write to the device
  *
  *  \return Boolean true if the command sequence complete successfully
  */
-bool TINYNVM_WriteMemory(const uint32_t WriteAddress, const uint8_t Byte)
+bool TINYNVM_WriteMemory(const uint32_t WriteAddress, const uint8_t* WriteBuffer, uint16_t WriteLength)
 {
 	/* Wait until the NVM controller is no longer busy */
 	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
@@ -139,9 +138,12 @@ bool TINYNVM_WriteMemory(const uint32_t WriteAddress, const uint8_t Byte)
 	/* Send the address of the location to write to */
 	TINYNVM_SendPointerAddress(WriteAddress);
 	
+	while (WriteLength--)
+	{
 		/* Write the byte of data to the target */
-	XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT);
-	XPROGTarget_SendByte(Byte);
+		XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);
+		XPROGTarget_SendByte(*(WriteBuffer++));
+	}
 	
 	return true;
 }

Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h

@@ -65,7 +65,7 @@
 		void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress);
 		bool TINYNVM_WaitWhileNVMBusBusy(void);
 		bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadLength);
-		bool TINYNVM_WriteMemory(const uint32_t WriteAddress, const uint8_t Byte);
+		bool TINYNVM_WriteMemory(const uint32_t WriteAddress, const uint8_t* WriteBuffer, uint16_t WriteLength);
 		bool TINYNVM_EraseMemory(void);
 
 #endif

Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c

@@ -134,6 +134,7 @@ static void XPROGProtocol_EnterXPROGMode(void)
 	}
 	else
 	{
+	#if 0
 		/* Enable TPI programming mode with the attached target */
 		XPROGTarget_EnableTargetTPI();
 		
@@ -144,6 +145,8 @@ static void XPROGProtocol_EnterXPROGMode(void)
 
 		/* Wait until the NVM bus becomes active */
 		NVMBusEnabled = TINYNVM_WaitWhileNVMBusBusy();
+	#endif
+		NVMBusEnabled = true;
 	}
 	
 	Endpoint_Write_Byte(CMD_XPROG);
@@ -313,10 +316,15 @@ static void XPROGProtocol_WriteMemory(void)
 	}
 	else
 	{
+		Serial_TxByte((uint8_t)WriteMemory_XPROG_Params.Length);
+	
 		/* Send write command to the TPI device, indicate timeout if occurred */
-		if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData[0])))
+		if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData,
+		      WriteMemory_XPROG_Params.Length)))
+		{
 			ReturnStatus = XPRG_ERR_TIMEOUT;
 		}
+	}
 	
 	Endpoint_Write_Byte(CMD_XPROG);
 	Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);
@@ -355,6 +363,8 @@ static void XPROGProtocol_ReadMemory(void)
 	}
 	else
 	{
+		Serial_TxByte((uint8_t)ReadMemory_XPROG_Params.Length);
+
 		/* Read the TPI target's memory, indicate timeout if occurred */
 		if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
 		  ReturnStatus = XPRG_ERR_TIMEOUT;

Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h

@@ -42,6 +42,7 @@
 		#include <stdio.h>
 		
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Peripheral/SerialStream.h>
 	
 		#include "../V2Protocol.h"
 		#include "XPROGTarget.h"