Fix USB Host mode compile errors for the UC3B architecture.

pull/1469/head
Dean Camera 14 years ago
parent 381dd0d490
commit 4a3b70e727

@ -102,6 +102,7 @@
#define eeprom_read_byte(x) *x
#define eeprom_update_byte(x, y) *x = y
#define eeprom_write_byte(x, y) *x = y
#define _delay_ms(x)
#define memcmp_P(...) memcmp(__VA_ARGS__)
#define memcpy_P(...) memcpy(__VA_ARGS__)

@ -180,7 +180,7 @@
static inline void USB_Host_ResetBus(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_ResetBus(void)
{
AVR32_USBB_UHCON.reset = true;
AVR32_USBB.UHCON.reset = true;
}
/** Determines if a previously issued bus reset (via the \ref USB_Host_ResetBus() macro) has
@ -191,7 +191,7 @@
static inline bool USB_Host_IsBusResetComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool USB_Host_IsBusResetComplete(void)
{
return AVR32_USBB_UHCON.reset;
return AVR32_USBB.UHCON.reset;
}
/** Resumes USB communications with an attached and enumerated device, by resuming the transmission
@ -201,7 +201,7 @@
static inline void USB_Host_ResumeBus(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_ResumeBus(void)
{
AVR32_USBB_UHCON.sofe = true;
AVR32_USBB.UHCON.sofe = true;
}
/** Suspends the USB bus, preventing any communications from occurring between the host and attached
@ -211,7 +211,7 @@
static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_SuspendBus(void)
{
AVR32_USBB_UHCON.sofe = false;
AVR32_USBB.UHCON.sofe = false;
}
/** Determines if the USB bus has been suspended via the use of the \ref USB_Host_SuspendBus() macro,
@ -223,7 +223,7 @@
static inline bool USB_Host_IsBusSuspended(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool USB_Host_IsBusSuspended(void)
{
return AVR32_USBB_UHCON.sofe;
return AVR32_USBB.UHCON.sofe;
}
/** Determines if the attached device is currently enumerated in Full Speed mode (12Mb/s), or
@ -234,7 +234,7 @@
static inline bool USB_Host_IsDeviceFullSpeed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool USB_Host_IsDeviceFullSpeed(void)
{
return (AVR32_USBB_USBSTA.speed == AVR32_USBB_SPEED_FULL);
return (AVR32_USBB.USBSTA.speed == AVR32_USBB_SPEED_FULL);
}
/** Determines if the attached device is currently issuing a Remote Wakeup request, requesting
@ -245,14 +245,14 @@
static inline bool USB_Host_IsRemoteWakeupSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool USB_Host_IsRemoteWakeupSent(void)
{
return AVR32_USBB_UHINT.rxrsmi;
return AVR32_USBB.UHINT.rxrsmi;
}
/** Clears the flag indicating that a Remote Wakeup request has been issued by an attached device. */
static inline void USB_Host_ClearRemoteWakeupSent(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_ClearRemoteWakeupSent(void)
{
AVR32_USBB_UHINTCLR.rxrsmic = true;
AVR32_USBB.UHINTCLR.rxrsmic = true;
}
/** Accepts a Remote Wakeup request from an attached device. This must be issued in response to
@ -262,7 +262,7 @@
static inline void USB_Host_ResumeFromWakeupRequest(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_ResumeFromWakeupRequest(void)
{
AVR32_USBB_UHCON.resume = true;
AVR32_USBB.UHCON.resume = true;
}
/** Determines if a resume from Remote Wakeup request is currently being sent to an attached
@ -273,7 +273,7 @@
static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool USB_Host_IsResumeFromWakeupRequestSent(void)
{
return AVR32_USBB_UHCON.resume;
return AVR32_USBB.UHCON.resume;
}
/* Function Prototypes: */
@ -348,13 +348,13 @@
static inline void USB_Host_VBUS_Auto_Enable(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_VBUS_Auto_Enable(void)
{
AVR32_USBB_USBCON.vbushwc = false;
AVR32_USBB.USBCON.vbushwc = false;
}
static inline void USB_Host_VBUS_Manual_Enable(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_VBUS_Manual_Enable(void)
{
AVR32_USBB_USBCON.vbushwc = true;
AVR32_USBB.USBCON.vbushwc = true;
// TODO: Manual VBUS pin output setup
}
@ -362,7 +362,7 @@
static inline void USB_Host_VBUS_Auto_On(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_VBUS_Auto_On(void)
{
AVR32_USBB_USBSTASET.vbusreqs = true;
AVR32_USBB.USBSTASET.vbusrqs = true;
}
static inline void USB_Host_VBUS_Manual_On(void) ATTR_ALWAYS_INLINE;
@ -374,7 +374,7 @@
static inline void USB_Host_VBUS_Auto_Off(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_VBUS_Auto_Off(void)
{
AVR32_USBB_USBSTACLR.vbusreqc = true;
AVR32_USBB.USBSTACLR.vbusrqc = true;
}
static inline void USB_Host_VBUS_Manual_Off(void) ATTR_ALWAYS_INLINE;
@ -386,13 +386,13 @@
static inline void USB_Host_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
static inline void USB_Host_SetDeviceAddress(const uint8_t Address)
{
AVR32_USBB_UHADDR1.uhaddrp0 = Address;
AVR32_USBB_UHADDR1.uhaddrp1 = Address;
AVR32_USBB_UHADDR1.uhaddrp2 = Address;
AVR32_USBB_UHADDR1.uhaddrp3 = Address;
AVR32_USBB_UHADDR2.uhaddrp4 = Address;
AVR32_USBB_UHADDR2.uhaddrp5 = Address;
AVR32_USBB_UHADDR2.uhaddrp6 = Address;
AVR32_USBB.UHADDR1.uhaddr_p0 = Address;
AVR32_USBB.UHADDR1.uhaddr_p1 = Address;
AVR32_USBB.UHADDR1.uhaddr_p2 = Address;
AVR32_USBB.UHADDR1.uhaddr_p3 = Address;
AVR32_USBB.UHADDR2.uhaddr_p4 = Address;
AVR32_USBB.UHADDR2.uhaddr_p5 = Address;
AVR32_USBB.UHADDR2.uhaddr_p6 = Address;
}
/* Enums: */

@ -96,30 +96,33 @@
#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
#endif
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* External Variables: */
extern uint8_t USB_SelectedPipe;
#endif
/* Public Interface - May be used in end-application: */
/* Macros: */
/** \name Pipe Error Flag Masks */
//@{
/** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
#define PIPE_ERRORFLAG_OVERFLOW ((1 << AVR32_USBB_UPSTA0_OVERFI_OFFSET) << 8)
/** Mask for \ref Pipe_GetErrorFlags(), indicating that an underflow error occurred in the pipe on the received data. */
#define PIPE_ERRORFLAG_UNDERFLOW ((1 << AVR32_USBB_UPSTA0_UNDERFI_OFFSET) << 8)
#define PIPE_ERRORFLAG_OVERFLOW (AVR32_USBB_UPSTA0_OVERFI_MASK << 8)
/** Mask for \ref Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */
#define PIPE_ERRORFLAG_CRC16 (1 << AVR32_USBB_UPERR0_CRC16_OFFSET)
#define PIPE_ERRORFLAG_CRC16 AVR32_USBB_UPERR0_CRC16_MASK
/** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */
#define PIPE_ERRORFLAG_TIMEOUT (1 << AVR32_USBB_UPERR0_TIMEOUT_OFFSET)
#define PIPE_ERRORFLAG_TIMEOUT AVR32_USBB_UPERR0_TIMEOUT_MASK
/** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */
#define PIPE_ERRORFLAG_PID (1 << AVR32_USBB_UPERR0_PID_OFFSET)
#define PIPE_ERRORFLAG_PID AVR32_USBB_UPERR0_PID_MASK
/** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */
#define PIPE_ERRORFLAG_DATAPID (1 << AVR32_USBB_UPERR0_DATAPID_OFFSET)
#define PIPE_ERRORFLAG_DATAPID AVR32_USBB_UPERR0_DATAPID_MASK
/** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
#define PIPE_ERRORFLAG_DATATGL (1 << AVR32_USBB_UPERR0_DATATGL_OFFSET)
#define PIPE_ERRORFLAG_DATATGL AVR32_USBB_UPERR0_DATATGL_MASK
//@}
/** \name Pipe Token Masks */
@ -254,7 +257,7 @@
static inline void Pipe_EnablePipe(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_EnablePipe(void)
{
AVR32_USBB.uprst |= (AVR32_USBB_PEN0_MASK << PipeNumber);
AVR32_USBB.uprst |= (AVR32_USBB_PEN0_MASK << USB_SelectedPipe);
}
/** Disables the currently selected pipe so that data cannot be sent and received through it to and
@ -263,7 +266,7 @@
static inline void Pipe_DisablePipe(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_DisablePipe(void)
{
AVR32_USBB.uprst &= ~(AVR32_USBB_PEN0_MASK << PipeNumber);
AVR32_USBB.uprst &= ~(AVR32_USBB_PEN0_MASK << USB_SelectedPipe);
}
/** Determines if the currently selected pipe is enabled, but not necessarily configured.
@ -273,7 +276,7 @@
static inline bool Pipe_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool Pipe_IsEnabled(void)
{
return ((AVR32_USBB.uprst & (AVR32_USBB_PEN0_MASK << PipeNumber)) ? true : false);
return ((AVR32_USBB.uprst & (AVR32_USBB_PEN0_MASK << USB_SelectedPipe)) ? true : false);
}
/** Gets the current pipe token, indicating the pipe's data direction and type.
@ -405,6 +408,7 @@
static inline void Pipe_ClearError(void)
{
((uint32_t*)AVR32_USBB_UPERR0)[USB_SelectedPipe] = 0;
((avr32_usbb_upsta0clr_t*)AVR32_USBB_UPSTA0CLR)[USB_SelectedPipe].overfic = true;
}
/** Determines if the master pipe error flag is set for the currently selected pipe, indicating that
@ -417,7 +421,8 @@
static inline bool Pipe_IsError(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool Pipe_IsError(void)
{
return ((((avr32_usbb_upsta0_t*)AVR32_USBB_UPSTA0)[USB_SelectedPipe].perri) ? true : false);
return ((((uint32_t*)AVR32_USBB_UPSTA0)[USB_SelectedPipe] &
(AVR32_USBB_PERRI_MASK | AVR32_USBB_OVERFI_MASK)) ? true : false);
}
/** Gets a mask of the hardware error flags which have occurred on the currently selected pipe. This
@ -428,10 +433,13 @@
static inline uint8_t Pipe_GetErrorFlags(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint8_t Pipe_GetErrorFlags(void)
{
return ((UPERRX & (PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT |
return ((((uint32_t*)AVR32_USBB_UPERR0)[USB_SelectedPipe] &
(PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT |
PIPE_ERRORFLAG_PID | PIPE_ERRORFLAG_DATAPID |
PIPE_ERRORFLAG_DATATGL)) |
(UPSTAX & (PIPE_ERRORFLAG_OVERFLOW | PIPE_ERRORFLAG_UNDERFLOW)));
((((uint32_t*)AVR32_USBB_UPSTA0)[USB_SelectedPipe] << 8) &
PIPE_ERRORFLAG_OVERFLOW));
}
/** Retrieves the number of busy banks in the currently selected pipe, which have been queued for
@ -487,7 +495,7 @@
static inline bool Pipe_IsOUTReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool Pipe_IsOUTReady(void)
{
return ((avr32_usbb_upsta0_t*)AVR32_USBB_UPSTA0)[USB_SelectedPipe].rxouti;
return ((avr32_usbb_upsta0_t*)AVR32_USBB_UPSTA0)[USB_SelectedPipe].txouti;
}
/** Determines if no SETUP request is currently being sent to the attached device on the selected
@ -522,7 +530,7 @@
static inline void Pipe_ClearIN(void)
{
((avr32_usbb_upsta0clr_t*)AVR32_USBB_UPSTA0CLR)[USB_SelectedPipe].rxinic = true;
((avr32_usbb_upsta0clr_t*)AVR32_USBB_UPSTA0CLR)[USB_SelectedPipe].fifoconc = true;
((avr32_usbb_upcon0clr_t*)AVR32_USBB_UPCON0CLR)[USB_SelectedPipe].fifoconc = true;
}
/** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing
@ -534,7 +542,7 @@
static inline void Pipe_ClearOUT(void)
{
((avr32_usbb_upsta0clr_t*)AVR32_USBB_UPSTA0CLR)[USB_SelectedPipe].txoutic = true;
((avr32_usbb_upsta0clr_t*)AVR32_USBB_UPSTA0CLR)[USB_SelectedPipe].fifoconc = true;
((avr32_usbb_upcon0clr_t*)AVR32_USBB_UPCON0CLR)[USB_SelectedPipe].fifoconc = true;
}
/** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on
@ -574,7 +582,7 @@
static inline bool Pipe_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline bool Pipe_IsStalled(void)
{
return ((avr32_usbb_upsta0_t*)AVR32_USBB_UPSTA0)[USB_SelectedPipe].rxstalledi;
return ((avr32_usbb_upsta0_t*)AVR32_USBB_UPSTA0)[USB_SelectedPipe].rxstalldi;
}
/** Clears the STALL condition detection flag on the currently selected pipe, but does not clear the
@ -585,7 +593,7 @@
static inline void Pipe_ClearStall(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_ClearStall(void)
{
((avr32_usbb_upsta0clr_t*)AVR32_USBB_UPSTA0CLR)[USB_SelectedPipe].rxstalledic = true;
((avr32_usbb_upsta0clr_t*)AVR32_USBB_UPSTA0CLR)[USB_SelectedPipe].rxstalldic = true;
}
/** Reads one byte from the currently selected pipe's bank, for OUT direction pipes.
@ -913,9 +921,6 @@
/* Function Prototypes: */
void Pipe_ClearPipes(void);
/* External Variables: */
extern uint8_t USB_SelectedPipe;
#endif
/* Disable C linkage for C++ Compilers: */

@ -98,7 +98,7 @@ void USB_Disable(void)
void USB_ResetInterface(void)
{
#if defined(USB_CAN_BE_BOTH)
bool UIDModeSelectEnabled = ((UHWCON & (1 << UIDE)) != 0);
bool UIDModeSelectEnabled = AVR32_USBB.USBCON.uide;
#endif
USB_INT_DisableAllInterrupts();

Loading…
Cancel
Save