Merge pull request #1129 from unxmaal/unxmaal_spacefn

Layout: Spacebar long-press as fn, for GH60 and GH60 Satan boards
pull/1137/head
Jack Humbert 8 years ago committed by GitHub
commit 4ab88f3a9e

@ -0,0 +1,112 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
# MIDI_ENABLE ?= YES # MIDI controls
# UNICODE_ENABLE ?= YES # Unicode
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

@ -0,0 +1,20 @@
Unxmaal's GH60 Layout
=====================
* Mostly stolen from /u/robotmaxtron
##Quantum MK Firmware
For the full Quantum feature list, see the parent readme.md.
* Standard Mac ANSI layout
* Spacebar acts as space when tapped, Fn when held
* Menu acts as menu when tapped, Fn2 when held
* Layer1:
* Top row = `~, F1-F12, Del
* JKIL = arrow cluster
* Layer2:
* Top row = media controls
* JKIL = PgDn/Up/Home/Insert
* Backspace = Reset
### Additional Credits
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.

Binary file not shown.

After

Width:  |  Height:  |  Size: 1015 KiB

@ -0,0 +1,190 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* RGB Underglow
* These settings are for the F4 by default:
*
*
* #define ws2812_PORTREG PORTF
* #define ws2812_DDRREG DDRF
* #define ws2812_pin PF4
* #define RGBLED_NUM 14 // Number of LEDs
* #define RGBLIGHT_HUE_STEP 10
* #define RGBLIGHT_SAT_STEP 17
* #define RGBLIGHT_VAL_STEP 17
*
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
*/
/* Deprecated code below
#define ws2812_PORTREG PORTF
#define ws2812_DDRREG DDRF
#define ws2812_pin PF4
*/
#define RGB_DI_PIN F4
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 8 // Number of LEDs
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

@ -0,0 +1,228 @@
#include "gh60.h"
#include "action_layer.h"
#define _BL 0
#define _AL 1
#define _FL 2
#define _UL 3
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* ANSI Base, Mac style
* ,-----------------------------------------------------------------------------.
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp |
* |-----------------------------------------------------------------------------|
* |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \|
* |-----------------------------------------------------------------------------|
* |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter |
* |-----------------------------------------------------------------------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
* |-----------------------------------------------------------------------------|
* |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl|
* `-----------------------------------------------------------------------------'
*/
[_BL] = KEYMAP(
KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \
KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \
KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \
KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \
MO(1),KC_LALT,KC_LGUI, LT(1,KC_SPACE), KC_NO, KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL),
/*
* Pok3r style arrow cluster
* ,-----------------------------------------------------------.
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
* |-----------------------------------------------------------|
* | | | | | | | | |Up| | | | | |
* |-----------------------------------------------------------|
* | | | | | | | |Left|Down|Right| | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_AL] = KEYMAP(
KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/*
* Secondary function layer
* ,-------------------------------------------------------------.
* | | | | | | | | RW|Play|FF| Mute| Vol Down | Vol up |Reset |
* |-------------------------------------------------------------|
* | | | | | | | | | |PgUp| | | | |
* |-------------------------------------------------------------|
* | | | | | | | |Home|PgDown|End| | | |
* |-------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-------------------------------------------------------------|
* | | | | | | | | |
* `-------------------------------------------------------------'
*/
[_FL] = KEYMAP(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,RESET, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_TRNS,KC_HOME,KC_PGDN,KC_END,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/*
* Locking layer for controlling the underglow.
* NOTE: currently unused.
*
* ,-----------------------------------------------------------.
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | |On|Mode| | | | | | | | | | |
* |-----------------------------------------------------------|
* | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_UL] = KEYMAP(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
};
enum function_id {
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
SHIFT_ESC,
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay
[1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay
[2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
[3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay
[4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
[5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
[6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
[7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
[8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
[9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
[10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
[11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
[12] = ACTION_FUNCTION(SHIFT_ESC),
[13] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_scan_user(void) {
// Layer LED indicators
// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
uint32_t layer = layer_state;
if (layer & (1<<1)) {
gh60_wasd_leds_on();
} else {
gh60_wasd_leds_off();
}
if (layer & (1<<2)) {
gh60_esc_led_on();
} else {
gh60_esc_led_off();
}
};
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
case RGBLED_TOGGLE:
//led operations
if (record->event.pressed) {
rgblight_toggle();
}
break;
case RGBLED_INCREASE_HUE:
if (record->event.pressed) {
rgblight_increase_hue();
}
break;
case RGBLED_DECREASE_HUE:
if (record->event.pressed) {
rgblight_decrease_hue();
}
break;
case RGBLED_INCREASE_SAT:
if (record->event.pressed) {
rgblight_increase_sat();
}
break;
case RGBLED_DECREASE_SAT:
if (record->event.pressed) {
rgblight_decrease_sat();
}
break;
case RGBLED_INCREASE_VAL:
if (record->event.pressed) {
rgblight_increase_val();
}
break;
case RGBLED_DECREASE_VAL:
if (record->event.pressed) {
rgblight_decrease_val();
}
break;
case RGBLED_STEP_MODE:
if (record->event.pressed) {
rgblight_step();
}
break;
static uint8_t shift_esc_shift_mask;
// Shift + ESC = ~
case SHIFT_ESC:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
if (record->event.pressed) {
if (shift_esc_shift_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (shift_esc_shift_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
};

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

@ -0,0 +1,20 @@
Unxmaal's GH60 Satan Layout
=====================
* Mostly stolen from /u/robotmaxtron
##Quantum MK Firmware
For the full Quantum feature list, see the parent readme.md.
* Standard Mac ANSI layout
* Spacebar acts as space when tapped, Fn when held
* Menu acts as menu when tapped, Fn2 when held
* Layer1:
* Top row = `~, F1-F12, Del
* JKIL = arrow cluster
* Layer2:
* Top row = media controls
* JKIL = PgDn/Up/Home/Insert
* Backspace = Reset
### Additional Credits
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.

@ -0,0 +1,119 @@
#include "satan.h"
// Used for SHIFT_ESC
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _AL 1
#define _FL 2
#define _______ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* ANSI Base, Mac style
* ,-----------------------------------------------------------------------------.
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp |
* |-----------------------------------------------------------------------------|
* |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \|
* |-----------------------------------------------------------------------------|
* |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter |
* |-----------------------------------------------------------------------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
* |-----------------------------------------------------------------------------|
* |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl|
* `-----------------------------------------------------------------------------'
*/
[_BL] = KEYMAP_ANSI(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
MO(_AL), KC_LALT,KC_LGUI, LT(_AL,KC_SPACE), KC_RGUI, KC_RALT, LT(_FL,KC_MENU), KC_RCTL),
/*
* Pok3r style arrow cluster
* ,-----------------------------------------------------------.
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
* |-----------------------------------------------------------|
* | | | | | | | | |Up| | | | | |
* |-----------------------------------------------------------|
* | | | | | | | |Left|Down|Right| | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_AL] = KEYMAP_ANSI(
KC_GRV, KC_F1, KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/* Keymap _FL: Function Layer
* ,-----------------------------------------------------------.
* | | | | | | | | | | | | | | RESET|
* |-----------------------------------------------------------|
* | | | | | | | | | | | |BL-|BL+|BL |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | RGB on|RGB step|Hue+|Hue- |Sat+|Sat-|Val+| Val-| | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_FL] = KEYMAP_ANSI(
#ifdef RGBLIGHT_ENABLE
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
_______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \
_______,_______,_______, _______, _______,_______,_______, _______),
#else
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
_______,_______,_______, _______, _______,_______,_______,_______),
#endif
};
enum function_id {
SHIFT_ESC,
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC),
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask;
switch (id) {
case SHIFT_ESC:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
if (record->event.pressed) {
if (shift_esc_shift_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (shift_esc_shift_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}
Loading…
Cancel
Save