updates rgblight implementation, makes non-timer stuff compatible with audio

keyboards/clueboard/rev1/config.h

@@ -25,9 +25,8 @@
 
 /* Underlight configuration
  */
-#define ws2812_PORTREG PORTB
+#define RGB_DI_PIN B2
-#define ws2812_DDRREG DDRB
+#define RGBLIGHT_TIMER
-#define ws2812_pin 2
 #define RGBLED_NUM 14     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/clueboard/rev2/config.h

@@ -29,9 +29,8 @@
 
 /* Underlight configuration
  */
-#define ws2812_PORTREG PORTD
+#define RGB_DI_PIN D7
-#define ws2812_DDRREG DDRD
+#define RGBLIGHT_TIMER
-#define ws2812_pin 7
 #define RGBLED_NUM 14     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/cluepad/config.h

@@ -69,9 +69,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Underlight configuration
  */
- #define ws2812_PORTREG PORTF
+#define RGB_DI_PIN F6
- #define ws2812_DDRREG DDRF
+#define RGBLIGHT_TIMER
- #define ws2812_pin 6
 #define RGBLED_NUM 4     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/kc60/keymaps/ws2812/config.h

@@ -1,9 +1,8 @@
 #include "../../config.h"
 
 /* WS2812B RGB Underglow LED */
-#define ws2812_PORTREG  PORTF
+#define RGB_DI_PIN F5   // Based on wiring depicted in ws2812_wiring.jpg
-#define ws2812_DDRREG   DDRF
+#define RGBLIGHT_TIMER       
-#define ws2812_pin PF5        // Based on wiring depicted in ws2812_wiring.jpg
 #define RGBLED_NUM 16         // Number of LEDs. Change this to match your use case.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8

keyboards/lets_split/config.h

@@ -69,9 +69,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
 /* ws2812 RGB LED */
-#define ws2812_PORTREG  PORTD
+#define RGB_DI_PIN D2
-#define ws2812_DDRREG   DDRD
+#define RGBLIGHT_TIMER
-#define ws2812_pin PD1
 #define RGBLED_NUM 28     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/phantom/config.h

@@ -62,9 +62,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Underlight configuration
  */
- #define ws2812_PORTREG PORTE
+#define RGB_DI_PIN E2
- #define ws2812_DDRREG DDRE
+#define RGBLIGHT_TIMER
- #define ws2812_pin 2
 #define RGBLED_NUM 20     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/planck/keymaps/experimental/Makefile

@@ -10,12 +10,12 @@ EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = yes           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/planck/keymaps/experimental/config.h

@@ -6,4 +6,12 @@
 #define LEADER_TIMEOUT 300
 #define BACKLIGHT_BREATHING
 
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B1
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
 #endif

keyboards/planck/keymaps/experimental/keymap.c

@@ -15,7 +15,7 @@ extern keymap_config_t keymap_config;
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
-#define _QWERTY 0
+#define _QWERTY 10
 #define _COLEMAK 1
 #define _DVORAK 2
 #define _LOWER 3
@@ -31,7 +31,15 @@ enum planck_keycodes {
   LOWER,
   RAISE,
   BACKLIT,
-  EXT_PLV
+  EXT_PLV,
+  RGBLED_TOGGLE,
+  RGBLED_STEP_MODE,
+  RGBLED_INCREASE_HUE,
+  RGBLED_DECREASE_HUE,
+  RGBLED_INCREASE_SAT,
+  RGBLED_DECREASE_SAT,
+  RGBLED_INCREASE_VAL,
+  RGBLED_DECREASE_VAL,
 };
 
 // Fillers to make layering more clear
@@ -39,9 +47,15 @@ enum planck_keycodes {
 #define XXXXXXX KC_NO
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = {
+  {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL},
+  {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL},
+  {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL},
+  {KC_NO, KC_NO, KC_NO, KC_NO, RGBLED_TOGGLE, RGBLED_STEP_MODE, RGBLED_INCREASE_HUE, RGBLED_DECREASE_HUE, RGBLED_INCREASE_SAT, RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL}
+},
 
 /* Qwerty
- * ,-----------------------------------------------------------------------------------.
+ ,-----------------------------------------------------------------------------------.
  * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
@@ -292,6 +306,57 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         break;
       return false;
 
+    case RGBLED_TOGGLE:
+      //led operations
+      if (record->event.pressed) {
+        rgblight_toggle();
+      }
+      return false;
+      break;
+    case RGBLED_INCREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_increase_hue();
+      }
+      return false;
+      break;
+    case RGBLED_DECREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_decrease_hue();
+      }
+      return false;
+      break;
+    case RGBLED_INCREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_increase_sat();
+      }
+      return false;
+      break;
+    case RGBLED_DECREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_decrease_sat();
+      }
+      return false;
+      break;
+    case RGBLED_INCREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_increase_val();
+      }
+      return false;
+      break;
+    case RGBLED_DECREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_decrease_val();
+      }
+      return false;
+      break;
+    case RGBLED_STEP_MODE:
+      if (record->event.pressed) {
+        rgblight_step();
+      }
+      return false;
+      break;
+
+
       }
   return true;
 };

keyboards/planck/keymaps/pvc/config.h

@@ -60,9 +60,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
 /* ws2812 RGB LED */
-#define ws2812_PORTREG  PORTD
+#define RGB_DI_PIN D1
-#define ws2812_DDRREG   DDRD
+#define RGBLIGHT_TIMER
-#define ws2812_pin PD1
 #define RGBLED_NUM 28     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/planck/keymaps/yang/config.h

@@ -4,9 +4,8 @@
 #include "../../config.h"
 
 /* ws2812 RGB LED */
-#define ws2812_PORTREG  PORTD
+#define RGB_DI_PIN D1
-#define ws2812_DDRREG   DDRD
+#define RGBLIGHT_TIMER
-#define ws2812_pin PD1
 #define RGBLED_NUM 28     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/preonic/config.h

@@ -62,9 +62,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
 /* ws2812 RGB LED */
-#define ws2812_PORTREG  PORTD
+#define RGB_DI_PIN D1
-#define ws2812_DDRREG   DDRD
+#define RGBLIGHT_TIMER
-#define ws2812_pin PD1
 #define RGBLED_NUM 28     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/satan/config.h

@@ -65,9 +65,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Underlight configuration
  */
- #define ws2812_PORTREG PORTE
+
- #define ws2812_DDRREG DDRE
+#define RGB_DI_PIN E2
- #define ws2812_pin 2
+#define RGBLIGHT_TIMER
 #define RGBLED_NUM 8     // Number of LEDs
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

quantum/light_ws2812.c

@@ -19,12 +19,16 @@
 // Setleds for standard RGB
 void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds)
 {
-   ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
+   // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
+   ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF));
 }
 
 void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask)
 {
-  ws2812_DDRREG |= pinmask; // Enable DDR
+  // ws2812_DDRREG |= pinmask; // Enable DDR
+  // new universal format (DDR)
+  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
+
   ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask);
   _delay_us(50);
 }
@@ -32,14 +36,17 @@ void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pin
 // Setleds for SK6812RGBW
 void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds)
 {
-  ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
+  // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
-  ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(ws2812_pin));
+  // new universal format (DDR)
+  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
+
+  ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF));
   _delay_us(80);
 }
 
 void ws2812_sendarray(uint8_t *data,uint16_t datlen)
 {
-  ws2812_sendarray_mask(data,datlen,_BV(ws2812_pin));
+  ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF));
 }
 
 /*
@@ -108,8 +115,10 @@ void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi)
   uint8_t curbyte,ctr,masklo;
   uint8_t sreg_prev;
 
-  masklo	=~maskhi&ws2812_PORTREG;
+  // masklo  =~maskhi&ws2812_PORTREG;
-  maskhi |=        ws2812_PORTREG;
+  // maskhi |=        ws2812_PORTREG;
+  masklo  =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2);
+  maskhi |=        _SFR_IO8((RGB_DI_PIN >> 4) + 2);
   sreg_prev=SREG;
   cli();
 
@@ -173,7 +182,7 @@ w_nop16
     "       dec   %0    \n\t"    //  '1' [+2] '0' [+2]
     "       brne  loop%=\n\t"    //  '1' [+3] '0' [+4]
     :	"=&d" (ctr)
-    :	"r" (curbyte), "I" (_SFR_IO_ADDR(ws2812_PORTREG)), "r" (maskhi), "r" (masklo)
+    :	"r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo)
     );
   }
 

quantum/rgblight.c

@@ -146,7 +146,9 @@ void rgblight_init(void) {
 	}
 	eeconfig_debug_rgblight(); // display current eeprom values
 
+	#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
 		rgblight_timer_init(); // setup the timer
+	#endif
 
   if (rgblight_config.enable) {
     rgblight_mode(rgblight_config.mode);
@@ -192,14 +194,19 @@ void rgblight_mode(uint8_t mode) {
   eeconfig_update_rgblight(rgblight_config.raw);
   xprintf("rgblight mode: %u\n", rgblight_config.mode);
 	if (rgblight_config.mode == 1) {
+		#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
 			rgblight_timer_disable();
+		#endif
 	} else if (rgblight_config.mode >=2 && rgblight_config.mode <=23) {
 		// MODE 2-5, breathing
 		// MODE 6-8, rainbow mood
 		// MODE 9-14, rainbow swirl
 		// MODE 15-20, snake
 		// MODE 21-23, knight
+
+		#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
 			rgblight_timer_enable();
+		#endif
 	}
   rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
 }
@@ -211,7 +218,10 @@ void rgblight_toggle(void) {
 	if (rgblight_config.enable) {
 		rgblight_mode(rgblight_config.mode);
 	} else {
+
+		#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
 			rgblight_timer_disable();
+		#endif
 		_delay_ms(50);
 		rgblight_set();
 	}
@@ -328,6 +338,9 @@ void rgblight_set(void) {
 	}
 }
 
+
+#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
+
 // Animation timer -- AVR Timer3
 void rgblight_timer_init(void) {
 	static uint8_t rgblight_timer_is_init = 0;
@@ -503,3 +516,5 @@ void rgblight_effect_knight(uint8_t interval) {
 	}
 
 }
+
+#endif

quantum/rgblight.h

@@ -1,8 +1,11 @@
 #ifndef RGBLIGHT_H
 #define RGBLIGHT_H
 
-#ifndef RGBLIGHT_MODES
+
+#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
 	#define RGBLIGHT_MODES 23
+#else
+	#define RGBLIGHT_MODES 1
 #endif
 
 #ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH

readme.md

@@ -704,23 +704,18 @@ For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring
 
     RGBLIGHT_ENABLE = yes
 
-Please note that the underglow is not compatible with audio output. So you cannot enable both of them at the same time.
+In order to use the underglow timer functions, you need to have `#define RGBLIGHT_TIMER` in your `config.h`, and have audio disabled (`AUDIO_ENABLE = no` in your Makefile).
 
-Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the F4 by default:
+Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default:
     
-    #define ws2812_PORTREG  PORTF
+    #define RGB_DI_PIN F4     // The pin your RGB strip is wired to
-    #define ws2812_DDRREG   DDRF
+    #define RGBLIGHT_TIMER    // Require for fancier stuff (not compatible with audio)
-    #define ws2812_pin PF4
     #define RGBLED_NUM 14     // Number of LEDs
     #define RGBLIGHT_HUE_STEP 10
     #define RGBLIGHT_SAT_STEP 17
     #define RGBLIGHT_VAL_STEP 17
 
-You'll need to edit `PORTF`, `DDRF`, and `PF4` on the first three lines to the port/pin you have your LED(s) wired to, eg for B3 change things to:
+You'll need to edit `RGB_DI_PIN` to the pin you have your `DI` on your RGB strip wired to.
-
-    #define ws2812_PORTREG  PORTB
-    #define ws2812_DDRREG   DDRB
-    #define ws2812_pin PB3
 
 The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. For details, please check this keymap. `keyboards/planck/keymaps/yang/keymap.c`