Correct backlight on state docs (#6358)

* Correct backlight on state docs

* Reword to make it less confusing
pull/6363/head
fauxpark 5 years ago committed by MechMerlin
parent d5b01bd34b
commit 5b4187ad1b

@ -73,8 +73,10 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
## Backlight On State ## Backlight On State
Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *low*. Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *high*.
Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case you must `#define BACKLIGHT_ON_STATE 1`, so that when the transistor is on, the pin is driven *high* instead. Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case, when the transistor is on, the pin is driven *low* instead.
This functionality is configured at the keyboard level with the `BACKLIGHT_ON_STATE` define.
## Multiple backlight pins ## Multiple backlight pins

Loading…
Cancel
Save