forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix line endings in FAQ.md

Browse Source
pull/1334/head
Fred Sundvik 8 years ago
parent b8c1f25072
commit 623b1cd866
1 changed files with 237 additions and 237 deletions
Show Stats Download Patch File Download Diff File

474
docs/FAQ.md
Unescape View File

@ -1,238 +1,238 @@
## READ FIRST ## READ FIRST
- **README** of top directory : https://github.com/tmk/tmk_keyboard/blob/master/README.md - **README** of top directory : https://github.com/tmk/tmk_keyboard/blob/master/README.md
- **README** of target project(keyboard/converter) directory. - **README** of target project(keyboard/converter) directory.
Note that you'll need to read **both**. Note that you'll need to read **both**.
# Build # Build
- [[FAQ/Build]] - [[FAQ/Build]]
# Keymap # Keymap
- [[FAQ/Keymap]] - [[FAQ/Keymap]]
# Debug Console # Debug Console
## hid_listen can't recognize device ## hid_listen can't recognize device
When debug console of your device is not ready you will see like this: When debug console of your device is not ready you will see like this:
Waiting for device:......... Waiting for device:.........
once the device is pluged in then *hid_listen* finds it you will get this message: once the device is pluged in then *hid_listen* finds it you will get this message:
Waiting for new device:......................... Waiting for new device:.........................
Listening: Listening:
Check if you can't get this 'Listening:' message: Check if you can't get this 'Listening:' message:
- build with `CONSOLE_ENABLE=yes` in **Makefile**. - build with `CONSOLE_ENABLE=yes` in **Makefile**.
You may need privilege to access the device on OS like Linux. You may need privilege to access the device on OS like Linux.
- try `sudo hid_listen` - try `sudo hid_listen`
## Can't get message on console ## Can't get message on console
Check: Check:
- *hid_listen* finds your device. See above. - *hid_listen* finds your device. See above.
- Enable debug with pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands). - Enable debug with pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
- set `debug_enable=true` usually in `matrix_init()` in **matrix.c**. - set `debug_enable=true` usually in `matrix_init()` in **matrix.c**.
- try using 'print' function instead of debug print. See **common/print.h**. - try using 'print' function instead of debug print. See **common/print.h**.
- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97). - disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
## Linux or UNIX like system requires Super User privilege ## Linux or UNIX like system requires Super User privilege
Just use 'sudo' to execute *hid_listen* with privilege. Just use 'sudo' to execute *hid_listen* with privilege.
``` ```
$ sudo hid_listen $ sudo hid_listen
``` ```
Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system. Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system.
File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu) File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu)
``` ```
# tmk keyboard products https://github.com/tmk/tmk_keyboard # tmk keyboard products https://github.com/tmk/tmk_keyboard
SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
``` ```
*** ***
# Miscellaneous # Miscellaneous
## NKRO Doesn't work ## NKRO Doesn't work
First you have to compile frimware with this build option `NKRO_ENABLE` in **Makefile**. First you have to compile frimware with this build option `NKRO_ENABLE` in **Makefile**.
Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work you need to switch to **6KRO** mode, in particular when you are in BIOS. Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work you need to switch to **6KRO** mode, in particular when you are in BIOS.
If your firmeare built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and keeped over power cycles. If your firmeare built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and keeped over power cycles.
https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch
## TrackPoint needs reset circuit(PS/2 mouse support) ## TrackPoint needs reset circuit(PS/2 mouse support)
Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware. See circuit schematic of TPM754. Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware. See circuit schematic of TPM754.
- http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447 - http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
- http://www.mikrocontroller.net/attachment/52583/tpm754.pdf - http://www.mikrocontroller.net/attachment/52583/tpm754.pdf
## Can't read column of matrix beyond 16 ## Can't read column of matrix beyond 16
Use `1UL<<16` instead of `1<<16` in `read_cols()` in **matrix.h** when your columns goes beyond 16. Use `1UL<<16` instead of `1<<16` in `read_cols()` in **matrix.h** when your columns goes beyond 16.
In C `1` means one of **int** type which is **16bit** in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use **unsigned long** type with `1UL`. In C `1` means one of **int** type which is **16bit** in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use **unsigned long** type with `1UL`.
http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
## Pull-up Resistor ## Pull-up Resistor
In some case converters needed to have pull-up resistors to work correctly. Place the resistor between VCC and signal line in parallel. In some case converters needed to have pull-up resistors to work correctly. Place the resistor between VCC and signal line in parallel.
For example: For example:
``` ```
Keyboard Conveter Keyboard Conveter
,------. ,------.
5V------+------|VCC | 5V------+------|VCC |
| | | | | |
R | | R | |
| | | | | |
Signal--+------|PD0 | Signal--+------|PD0 |
| | | |
GND------------|GND | GND------------|GND |
`------' `------'
R: 1K Ohm resistor R: 1K Ohm resistor
``` ```
https://github.com/tmk/tmk_keyboard/issues/71 https://github.com/tmk/tmk_keyboard/issues/71
## Arduino Micro's pin naming is confusing ## Arduino Micro's pin naming is confusing
Note that Arduino Micro PCB marking is different from real AVR port name. D0 of Arduino Micro is not PD0, PD0 is D3. Check schematic yourself. Note that Arduino Micro PCB marking is different from real AVR port name. D0 of Arduino Micro is not PD0, PD0 is D3. Check schematic yourself.
http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
## Bootloader jump doesn't work ## Bootloader jump doesn't work
Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**. Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**.
``` ```
# Size of Bootloaders in bytes: # Size of Bootloaders in bytes:
# Atmel DFU loader(ATmega32U4) 4096 # Atmel DFU loader(ATmega32U4) 4096
# Atmel DFU loader(AT90USB128) 8192 # Atmel DFU loader(AT90USB128) 8192
# LUFA bootloader(ATmega32U4) 4096 # LUFA bootloader(ATmega32U4) 4096
# Arduino Caterina(ATmega32U4) 4096 # Arduino Caterina(ATmega32U4) 4096
# USBaspLoader(ATmega***) 2048 # USBaspLoader(ATmega***) 2048
# Teensy halfKay(ATmega32U4) 512 # Teensy halfKay(ATmega32U4) 512
# Teensy++ halfKay(AT90USB128) 2048 # Teensy++ halfKay(AT90USB128) 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096 OPT_DEFS += -DBOOTLOADER_SIZE=4096
``` ```
AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet. AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet.
Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**. Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**.
AVR Boot section is located at end of Flash memory like the followings. AVR Boot section is located at end of Flash memory like the followings.
``` ```
byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286)
0x0000 +---------------+ 0x00000 +---------------+ 0x0000 +---------------+ 0x00000 +---------------+
| | | | | | | |
| | | | | | | |
| Application | | Application | | Application | | Application |
| | | | | | | |
= = = = = = = =
| | 32KB-4KB | | 128KB-8KB | | 32KB-4KB | | 128KB-8KB
0x6000 +---------------+ 0x1E000 +---------------+ 0x6000 +---------------+ 0x1E000 +---------------+
| Bootloader | 4KB | Bootloader | 8KB | Bootloader | 4KB | Bootloader | 8KB
0x7FFF +---------------+ 0x1FFFF +---------------+ 0x7FFF +---------------+ 0x1FFFF +---------------+
byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286)
0x0000 +---------------+ 0x00000 +---------------+ 0x0000 +---------------+ 0x00000 +---------------+
| | | | | | | |
| | | | | | | |
| Application | | Application | | Application | | Application |
| | | | | | | |
= = = = = = = =
| | 32KB-512B | | 128KB-2KB | | 32KB-512B | | 128KB-2KB
0x7E00 +---------------+ 0x1FC00 +---------------+ 0x7E00 +---------------+ 0x1FC00 +---------------+
| Bootloader | 512B | Bootloader | 2KB | Bootloader | 512B | Bootloader | 2KB
0x7FFF +---------------+ 0x1FFFF +---------------+ 0x7FFF +---------------+ 0x1FFFF +---------------+
``` ```
And see this discussion for further reference. And see this discussion for further reference.
https://github.com/tmk/tmk_keyboard/issues/179 https://github.com/tmk/tmk_keyboard/issues/179
## Special Extra key doesn't work(System, Audio control keys) ## Special Extra key doesn't work(System, Audio control keys)
You need to define `EXTRAKEY_ENABLE` in **makefile** to use them in TMK. You need to define `EXTRAKEY_ENABLE` in **makefile** to use them in TMK.
``` ```
EXTRAKEY_ENABLE = yes # Audio control and System control EXTRAKEY_ENABLE = yes # Audio control and System control
``` ```
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-60.html#p157919 http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-60.html#p157919
## Wakeup from sleep doesn't work ## Wakeup from sleep doesn't work
In Windows check `Allow this device to wake the computer` setting in Power **Management property** tab of **Device Manager**. Also check BIOS setting. In Windows check `Allow this device to wake the computer` setting in Power **Management property** tab of **Device Manager**. Also check BIOS setting.
Pressing any key during sleep should wake host. Pressing any key during sleep should wake host.
## Using Arduino? ## Using Arduino?
**Note that Arduino pin naming is different from actual chip.** For example, Arduino pin `D0` is not `PD0`. Check circuit with its schematics yourself. **Note that Arduino pin naming is different from actual chip.** For example, Arduino pin `D0` is not `PD0`. Check circuit with its schematics yourself.
- http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf - http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf
- http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf - http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
Arduino leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem. Arduino leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem.
## Using PF4-7 pins of USB AVR? ## Using PF4-7 pins of USB AVR?
You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affeteced with this. You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affeteced with this.
If you are using Teensy this isn't needed. Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function. If you are using Teensy this isn't needed. Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function.
See this code. See this code.
``` ```
// JTAG disable for PORT F. write JTD bit twice within four cycles. // JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD); MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD); MCUCR |= (1<<JTD);
``` ```
https://github.com/tmk/tmk_keyboard/blob/master/keyboard/hbkb/matrix.c#L67 https://github.com/tmk/tmk_keyboard/blob/master/keyboard/hbkb/matrix.c#L67
And read **26.5.1 MCU Control Register – MCUCR** of ATMega32U4 datasheet. And read **26.5.1 MCU Control Register – MCUCR** of ATMega32U4 datasheet.
## Adding LED indicators of Lock keys ## Adding LED indicators of Lock keys
You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post. You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post.
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560 http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
## Program Arduino Micro/Leonardo ## Program Arduino Micro/Leonardo
Push reset button and then run command like this within 8 seconds. Push reset button and then run command like this within 8 seconds.
``` ```
avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0 avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
``` ```
Device name will vary depending on your system. Device name will vary depending on your system.
http://arduino.cc/en/Main/ArduinoBoardMicro http://arduino.cc/en/Main/ArduinoBoardMicro
https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867 https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
## USB 3 compatibility ## USB 3 compatibility
I heard some people have a problem with USB 3 port, try USB 2 port. I heard some people have a problem with USB 3 port, try USB 2 port.
## Mac compatibility ## Mac compatibility
### OS X 10.11 and Hub ### OS X 10.11 and Hub
https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034 https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034
## Problem on BIOS(UEFI)/Resume(Sleep&Wake)/Power cycles ## Problem on BIOS(UEFI)/Resume(Sleep&Wake)/Power cycles
Some people reported their keyboard stops working on BIOS and/or after resume(power cycles). Some people reported their keyboard stops working on BIOS and/or after resume(power cycles).
As of now root of its cause is not clear but some build options seem to be related. In Makefile try to disable those options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others. As of now root of its cause is not clear but some build options seem to be related. In Makefile try to disable those options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others.
https://github.com/tmk/tmk_keyboard/issues/266 https://github.com/tmk/tmk_keyboard/issues/266
https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778 https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778
## FLIP doesn't work ## FLIP doesn't work
### AtLibUsbDfu.dll not found ### AtLibUsbDfu.dll not found
Remove current driver and reinstall one FLIP provides from DeviceManager. Remove current driver and reinstall one FLIP provides from DeviceManager.
http://imgur.com/a/bnwzy http://imgur.com/a/bnwzy
Write Preview
Loading…
Cancel
Save