Minor documentation improvements.

LUFA/DoxygenPages/ChangeLog.txt

@@ -8,13 +8,14 @@
   *
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX
   *  <b>New:</b>
-  *   - Added support for the Atmel Xplained-MINI series of development kits.
+  *   - Added support for the Atmel Xplained-MINI series of development kits
+  *   - Added new PROGMEM variant send functions to the CDC class driver (thanks to Stefan Hellermann)
   *
   *  <b>Changed:</b>
   *  - Library Applications:
   *   - The CDC, DFU, Mass Storage and Printer class bootloaders will no longer run the user application if the application reset
   *     vector is blank (thanks to Alex Kazik)
-  *   - The CDC, DFU and Printer class bootloaders are now compatible with the original Atmel XPLAIN and Arduino Leonardo boards.
+  *   - The CDC, DFU and Printer class bootloaders are now compatible with the original Atmel XPLAIN and Arduino Leonardo boards
   *   - The CDC, DFU, Mass Storage and Printer class bootloaders are not compatible with devices with the BOOTRST fuse set and will
   *     exit automatically unless an external reset was the last reset cause (thanks to Alex Kazik)
   *

LUFA/DoxygenPages/CompileTimeTokens.txt

@@ -114,7 +114,7 @@
  *      VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be
  *      slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is
  *      required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global
- *      can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro.
+ *      can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the user application.
  *      When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events.
  *
  *  \li <b>NO_SOF_EVENTS</b> - (\ref Group_Events) - <i>All Architectures</i> \n

LUFA/StudioIntegration/VSIX/extension.vsixmanifest

@@ -15,19 +15,20 @@
 		<SupportedProducts>
 			<IsolatedShell Version="6.1">AtmelStudio</IsolatedShell>
 			<IsolatedShell Version="6.2">AtmelStudio</IsolatedShell>
+			<IsolatedShell Version="7.0">AtmelStudio</IsolatedShell>
 		</SupportedProducts>
 
 		<SupportedFrameworkRuntimeEdition MinVersion="4.0" MaxVersion="4.5"/>
 		<Locale>1033</Locale>
 
-	    <AllUsers>false</AllUsers>
+		<AllUsers>false</AllUsers>
 	</Identifier>
 
 	<References/>
 
 	<Content>
 		<VsPackage>LUFA.pkgdef</VsPackage>
-	    <CustomExtension Type="MSHelp">helpcontentsetup.msha</CustomExtension>
+		<CustomExtension Type="MSHelp">helpcontentsetup.msha</CustomExtension>
 		<CustomExtension Type="asf-manifest">asf-manifest.xml</CustomExtension>
 	</Content>
 </Vsix>

LUFA/StudioIntegration/lufa.xml

@@ -58,7 +58,7 @@
 			<device-support value="atxmega128b1"/>
 			<device-support value="atxmega64c3"/>
 			<device-support value="atxmega128c3"/>
-			<!-- <device-support value="atxmega192c3"/> Wait for ASFP-3339 merge and release before enabling -->
+			<device-support value="atxmega192c3"/>
 			<device-support value="atxmega256c3"/>
 			<device-support value="atxmega384c3"/>
 			<device-support value="atxmega16c4"/>

Projects/LEDNotifier/LEDNotifier.c

@@ -134,6 +134,8 @@ int main(void)
 		if (Channel & (1 << 7))
 		  SoftPWM_Channel3_Duty = Duty;
 
+		fputc(&USBSerialStream, ColourUpdate);
+
 		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
 		USB_USBTask();
 	}

Projects/LEDNotifier/makefile

@@ -11,10 +11,10 @@
 
 # Run "make help" for target help.
 
-MCU          = at90usb1287
+MCU          = atmega32u2
 ARCH         = AVR8
-BOARD        = BUI
-F_CPU        = 8000000
+BOARD        = USB2AX
+F_CPU        = 16000000
 F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = LEDNotifier