forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove support for devices that were not put into production.

Browse Source
pull/1469/head
Dean Camera 12 years ago
parent 04d13d264c
commit 7d037c7db8
8 changed files with 29 additions and 57 deletions
Show Stats Download Patch File Download Diff File

4
Bootloaders/CDC/Descriptors.h
Unescape View File

@ -58,10 +58,6 @@
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x96
#define AVR_SIGNATURE_3 0x82
#elif defined(__AVR_ATmega32U6__)
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x95
#define AVR_SIGNATURE_3 0x88
#elif defined(__AVR_ATmega32U4__)
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x95

5
Bootloaders/DFU/Descriptors.h
Unescape View File

@ -85,11 +85,6 @@
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x96
#define AVR_SIGNATURE_3 0x82
#elif defined(__AVR_ATmega32U6__)
#define PRODUCT_ID_CODE 0x2FFB
#define AVR_SIGNATURE_1 0x1E
#define AVR_SIGNATURE_2 0x95
#define AVR_SIGNATURE_3 0x88
#elif defined(__AVR_ATmega32U4__)
#define PRODUCT_ID_CODE 0x2FF4
#define AVR_SIGNATURE_1 0x1E

21
LUFA/DoxygenPages/DeviceSupport.txt
Unescape View File

@ -12,7 +12,7 @@
* \li \subpage Page_UC3Support - Atmel AVR32 UC3 Support
* \li \subpage Page_XMEGASupport - Atmel XMEGA Support
*/
/**
* \page Page_AVR8Support Atmel 8-Bit AVR (AVR8) Support
*
@ -62,11 +62,6 @@
* <td bgcolor="#EE0000">No</td>
* </tr>
* <tr>
* <td>ATMEGA32U6</td>
* <td bgcolor="#00EE00">Yes</td>
* <td bgcolor="#EE0000">No</td>
* </tr>
* <tr>
* <td>AT90USB646</td>
* <td bgcolor="#00EE00">Yes</td>
* <td bgcolor="#EE0000">No</td>
@ -126,7 +121,7 @@
* - Tom's USBTINY-MKII (all revisions and versions)
* - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers)
*/
/**
* \page Page_UC3Support Atmel 32-Bit UC3 AVR (UC3)
*
@ -143,16 +138,6 @@
* <th width="150px">USB Host Mode</th>
* </tr>
* <tr>
* <td>AT32UC3A064</td>
* <td bgcolor="#00EE00">Yes</td>
* <td bgcolor="#00EE00">Yes</td>
* </tr>
* <tr>
* <td>AT32UC3A164</td>
* <td bgcolor="#00EE00">Yes</td>
* <td bgcolor="#00EE00">Yes</td>
* </tr>
* <tr>
* <td>AT32UC3A364</td>
* <td bgcolor="#00EE00">Yes</td>
* <td bgcolor="#00EE00">Yes</td>
@ -297,7 +282,7 @@
* Currently supported third-party boards (see \ref Group_BoardTypes for makefile \c BOARD constant names):
* - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers)
*/
/**
* \page Page_XMEGASupport Atmel USB XMEGA AVR (XMEGA)
*

15
LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
Unescape View File

@ -55,14 +55,14 @@
* \code
* // Initialize the ADC driver before first use
* ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
*
*
* // Must setup the ADC channel to read beforehand
* ADC_SetupChannel(1);
*
*
* // Perform a single conversion of the ADC channel 1
* ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
* printf("Conversion Result: %d\r\n", ADC_GetResult());
*
*
* // Start reading ADC channel 1 in free running (continuous conversion) mode
* ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
* for (;;)
@ -93,8 +93,7 @@
#if !(defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || \
defined(__AVR_ATmega32U6__))
defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
#error The ADC peripheral driver is not currently available for your selected microcontroller model.
#endif
@ -276,8 +275,7 @@
static inline void ADC_SetupChannel(const uint8_t ChannelIndex)
{
#if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
defined(__AVR_ATmega32U6__))
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__))
DDRF &= ~(1 << ChannelIndex);
DIDR0 |= (1 << ChannelIndex);
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
@ -318,8 +316,7 @@
static inline void ADC_DisableChannel(const uint8_t ChannelIndex)
{
#if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
defined(__AVR_ATmega32U6__))
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__))
DDRF &= ~(1 << ChannelIndex);
DIDR0 &= ~(1 << ChannelIndex);
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))

25
LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
Unescape View File

@ -54,35 +54,35 @@
* \code
* // Initialize the TWI driver before first use at 200KHz
* TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 200000));
*
*
* // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
* if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError)
* {
* TWI_SendByte(0xDC);
*
*
* TWI_SendByte(0x01);
* TWI_SendByte(0x02);
* TWI_SendByte(0x03);
*
*
* // Must stop transmission afterwards to release the bus
* TWI_StopTransmission();
* }
*
*
* // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout
* if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError)
* {
* TWI_SendByte(0xDC);
* TWI_StopTransmission();
*
*
* if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_READ, 10) == TWI_ERROR_NoError)
* {
* uint8_t Byte1, Byte2, Byte3;
*
*
* // Read three bytes, acknowledge after the third byte is received
* TWI_ReceiveByte(&Byte1, false);
* TWI_ReceiveByte(&Byte2, false);
* TWI_ReceiveByte(&Byte3, true);
*
*
* // Must stop transmission afterwards to release the bus
* TWI_StopTransmission();
* }
@ -93,18 +93,18 @@
* \code
* // Initialize the TWI driver before first use at 200KHz
* TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 200000));
*
*
* // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
* uint8_t InternalWriteAddress = 0xDC;
* uint8_t WritePacket[3] = {0x01, 0x02, 0x03};
*
*
* TWI_WritePacket(0xA0, 10, &InternalWriteAddress, sizeof(InternalWriteAddress),
* &WritePacket, sizeof(WritePacket);
*
*
* // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout
* uint8_t InternalReadAddress = 0xDC;
* uint8_t ReadPacket[3];
*
*
* TWI_ReadPacket(0xA0, 10, &InternalReadAddress, sizeof(InternalReadAddress),
* &ReadPacket, sizeof(ReadPacket);
* \endcode
@ -133,8 +133,7 @@
#if !(defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || \
defined(__AVR_ATmega32U6__))
defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
#error The TWI peripheral driver is not currently available for your selected microcontroller model.
#endif

8
LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
Unescape View File

@ -203,10 +203,10 @@
const uint8_t Banks)
{
uint8_t Number = (Address & ENDPOINT_EPNUM_MASK);
if (Number >= ENDPOINT_TOTAL_ENDPOINTS)
return false;
return Endpoint_ConfigureEndpoint_Prv(Number,
((Type << EPTYPE0) | ((Address & ENDPOINT_DIR_IN) ? (1 << EPDIR) : 0)),
((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Endpoint_BytesToEPSizeMask(Size)));
@ -221,9 +221,9 @@
static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint16_t Endpoint_BytesInEndpoint(void)
{
#if (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) && !defined(__AVR_ATmega32U6__)
#if (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
return UEBCX;
#elif defined(USB_SERIES_4_AVR) || defined(__AVR_ATmega32U6__)
#elif defined(USB_SERIES_4_AVR)
return (((uint16_t)UEBCHX << 8) | UEBCLX);
#elif defined(USB_SERIES_2_AVR)
return UEBCLX;

4
LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
Unescape View File

@ -91,7 +91,7 @@
#define USB_PLL_PSC 0
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
#define USB_PLL_PSC 0
#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || defined(__AVR_ATmega32U6__))
#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
#define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0))
#elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
#define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0))
@ -103,7 +103,7 @@
#define USB_PLL_PSC (1 << PLLP0)
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
#define USB_PLL_PSC (1 << PINDIV)
#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_ATmega32U6__))
#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__))
#define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP1))
#elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__))
#define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP0))

4
LUFA/Drivers/USB/Core/USBMode.h
Unescape View File

@ -106,7 +106,7 @@
* (i.e. AT32UC3A4*) when defined.
*/
#define USB_SERIES_UC3A4_AVR
/** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller
* (i.e. AT32UC3B0*) when defined.
*/
@ -175,7 +175,7 @@
#elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))
#define USB_SERIES_4_AVR
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
#define USB_SERIES_6_AVR
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))

Write Preview
Loading…
Cancel
Save