forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix all device mode demos broken in the recent API changes.

Browse Source 
Change USBtoSerial Tx to polling-driven rather than interrupt driven, to ensure more time for the Rx interrupt to be serviced.
pull/1469/head
Dean Camera 16 years ago
parent b7ef7f49c9
commit 7eb4eb7cdd
9 changed files with 21 additions and 38 deletions
Show Stats Download Patch File Download Diff File

4
Bootloaders/DFU/BootloaderDFU.c
Unescape View File

@ -139,7 +139,7 @@ int main (void)
/** Event handler for the USB_Disconnect event. This indicates that the bootloader should exit and the user
* application started.
*/
void EventHandler_USB_Disconnect(void)
void EVENT_USB_Disconnect(void)
{
/* Upon disconnection, run user application */
RunBootloader = false;
@ -149,7 +149,7 @@ void EventHandler_USB_Disconnect(void)
* control requests that are not handled internally by the USB library (including the DFU commands, which are
* all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
void EventHandler_USB_UnhandledControlPacket(void)
void EVENT_USB_UnhandledControlPacket(void)
{
/* Get the size of the command and data from the wLength value */
SentCommand.DataSize = USB_ControlRequest.wLength;

8
Demos/Device/AudioOutput/AudioOutput.c
Unescape View File

@ -75,7 +75,7 @@ int main(void)
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
* configures the sample update and PWM timers.
*/
void EventHandler_USB_Connect(void)
void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@ -110,7 +110,7 @@ void EventHandler_USB_Connect(void)
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
*/
void EventHandler_USB_Disconnect(void)
void EVENT_USB_Disconnect(void)
{
/* Stop the timers */
TCCR0B = 0;
@ -140,7 +140,7 @@ void EventHandler_USB_Disconnect(void)
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured.
*/
void EventHandler_USB_ConfigurationChanged(void)
void EVENT_USB_ConfigurationChanged(void)
{
/* Setup audio stream endpoint */
Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS,
@ -155,7 +155,7 @@ void EventHandler_USB_ConfigurationChanged(void)
* control requests that are not handled internally by the USB library (including the Audio class-specific
* requests) so that they can be handled appropriately for the application.
*/
void EventHandler_USB_UnhandledControlPacket(void)
void EVENT_USB_UnhandledControlPacket(void)
{
/* Process General and Audio specific control requests */
switch (USB_ControlRequest.bRequest)

2
Demos/Device/AudioOutput/Descriptors.c
Unescape View File

@ -271,7 +271,7 @@ USB_Descriptor_String_t PROGMEM ProductString =
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
{
const uint8_t DescriptorType = (wValue >> 8);
const uint8_t DescriptorNumber = (wValue & 0xFF);

3
Demos/Device/GenericHID/GenericHID.c
Unescape View File

@ -59,6 +59,9 @@ int main(void)
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
LEDs_Init();
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);

8
Demos/Device/MassStorage/MassStorage.c
Unescape View File

@ -86,7 +86,7 @@ int main(void)
}
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
void EventHandler_USB_Connect(void)
void EVENT_USB_Connect(void)
{
/* Indicate USB enumerating */
UpdateStatus(Status_USBEnumerating);
@ -98,7 +98,7 @@ void EventHandler_USB_Connect(void)
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the Mass Storage management task.
*/
void EventHandler_USB_Disconnect(void)
void EVENT_USB_Disconnect(void)
{
/* Stop running mass storage task */
Scheduler_SetTaskMode(USB_MassStorage, TASK_STOP);
@ -110,7 +110,7 @@ void EventHandler_USB_Disconnect(void)
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the Mass Storage management task started.
*/
void EventHandler_USB_ConfigurationChanged(void)
void EVENT_USB_ConfigurationChanged(void)
{
/* Setup Mass Storage In and Out Endpoints */
Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPNUM, EP_TYPE_BULK,
@ -132,7 +132,7 @@ void EventHandler_USB_ConfigurationChanged(void)
* control requests that are not handled internally by the USB library (including the Mass Storage class-specific
* requests) so that they can be handled appropriately for the application.
*/
void EventHandler_USB_UnhandledControlPacket(void)
void EVENT_USB_UnhandledControlPacket(void)
{
/* Process UFI specific control requests */
switch (USB_ControlRequest.bRequest)

24
Demos/Device/USBtoSerial/USBtoSerial.c
Unescape View File

@ -256,16 +256,9 @@ TASK(CDC_Task)
}
}
/* Check if Rx buffer contains data */
/* Check if Rx buffer contains data - if so, send it */
if (Rx_Buffer.Elements)
{
/* Initiate the transmission of the buffer contents if USART idle */
if (!(Transmitting))
{
Transmitting = true;
Serial_TxByte(Buffer_GetElement(&Rx_Buffer));
}
}
/* Select the Serial Tx Endpoint */
Endpoint_SelectEndpoint(CDC_TX_EPNUM);
@ -303,19 +296,6 @@ TASK(CDC_Task)
}
}
/** ISR to handle the USART transmit complete interrupt, fired each time the USART has sent a character. This reloads the USART
* data register with the next byte from the Rx_Buffer circular buffer if a character is available, or stops the transmission if
* the buffer is currently empty.
*/
ISR(USART1_TX_vect, ISR_BLOCK)
{
/* Send next character if available */
if (Rx_Buffer.Elements)
UDR1 = Buffer_GetElement(&Rx_Buffer);
else
Transmitting = false;
}
/** ISR to handle the USART receive complete interrupt, fired each time the USART has received a character. This stores the received
* character into the Tx_Buffer circular buffer for later transmission to the host.
*/
@ -383,7 +363,7 @@ void ReconfigureUSART(void)
UCSR1A = (1 << U2X1);
/* Enable transmit and receive modules and interrupts */
UCSR1B = ((1 << TXCIE1) | (1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
/* Set the USART mode to the mask generated by the Line Coding options */
UCSR1C = ConfigMask;

2
LUFA.pnproj
View File

File diff suppressed because one or more lines are too long

1
LUFA/ChangeLog.txt
Unescape View File

@ -29,6 +29,7 @@
* - Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the
* LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preperation for the new USB class APIs
* - Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure
* - Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt
*
*
* \section Sec_ChangeLog090510 Version 090510

5
LUFA/Drivers/USB/LowLevel/Device.h
Unescape View File

@ -117,8 +117,7 @@
/* Function Prototypes: */
/** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,
* index and language ID. This function MUST be overridden in the user application (added with full, identical
* prototype and name except for the \ref ATTR_WEAK attribute) so that the library can call it to retrieve descriptor
* data.
* prototype and name so that the library can call it to retrieve descriptor data.
*
* \param wValue The type of the descriptor to retrieve in the upper byte, and the index in the
* lower byte (when more than one descriptor of the given type exists, such as the
@ -139,7 +138,7 @@
* \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_WEAK ATTR_NON_NULL_PTR_ARG(3);
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)

Write Preview
Loading…
Cancel
Save