forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from the last page of FLASH.

Browse Source
pull/1469/head
Dean Camera 15 years ago
parent 6b7770ef2b
commit 80d85090ba
6 changed files with 58 additions and 62 deletions
Show Stats Download Patch File Download Diff File

30
LUFA/ManPages/ChangeLog.txt
Unescape View File

@ -6,26 +6,18 @@
/** \page Page_ChangeLog Project Changelog /** \page Page_ChangeLog Project Changelog
* *
* \section Sec_ChangeLog100513 Version 100513 * \section Sec_ChangeLogXXXXXX Version XXXXXX
* <b>New:</b> * <b>New:</b>
* - N/A * N/A
* *
* <b>Changed:</b> * <b>Changed:</b>
* - The TeensyHID bootloader has been removed, per request from Paul at PJRC * N/A
* - The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed
* LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver
* *
* <b>Fixed:</b> * <b>Fixed:</b>
* - Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and the control endpoint is not properly * - Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from
* selected when the ISR completes * the last page of FLASH
* - Fixed AVRISP-MKII clone project not correctly issuing LOAD EXTENDED ADDRESS commands when the extended address
* boundary is crossed during programming or readback (thanks to Gerard Sexton)
* - Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled
* - Remove incorrect check for the current device state in the Set Configuration request handler of DevChapter9, which broke
* Set Configuration requests to the device under most circumstances.
*
* \section Sec_ChangeLog100512 Version 100512
* *
* \section Sec_ChangeLog100513 Version 100513
* <b>New:</b> * <b>New:</b>
* - Added incomplete MIDIToneGenerator project * - Added incomplete MIDIToneGenerator project
* - Added new Relay Controller Board project (thanks to OBinou) * - Added new Relay Controller Board project (thanks to OBinou)
@ -63,8 +55,18 @@
* properly reset to their defaults * properly reset to their defaults
* - Device mode class driver callbacks are now fired before the control request status stage is sent to prevent the host from * - Device mode class driver callbacks are now fired before the control request status stage is sent to prevent the host from
* timing out if another request is immediately fired and the device has a lengthy callback routine * timing out if another request is immediately fired and the device has a lengthy callback routine
* - The TeensyHID bootloader has been removed, per request from Paul at PJRC
* - The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed
* LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver
* *
* <b>Fixed:</b> * <b>Fixed:</b>
* - Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and the control endpoint is not properly
* selected when the ISR completes
* - Fixed AVRISP-MKII clone project not correctly issuing LOAD EXTENDED ADDRESS commands when the extended address
* boundary is crossed during programming or readback (thanks to Gerard Sexton)
* - Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled
* - Remove incorrect check for the current device state in the Set Configuration request handler of DevChapter9, which broke
* Set Configuration requests to the device under most circumstances.
* - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin * - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin
* - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register * - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register
* - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus * - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus

7
LUFA/ManPages/MigrationInformation.txt
Unescape View File

@ -10,11 +10,10 @@
* to the next version released. It does not indicate all new additions to the library in each version change, only * to the next version released. It does not indicate all new additions to the library in each version change, only
* areas relevant to making older projects compatible with the API changes of each new release. * areas relevant to making older projects compatible with the API changes of each new release.
* *
* \section Sec_Migration100513 Migrating from 100512 to 100513 * \section Sec_Migration100513 Migrating from 100219 to 100513
* This release was made shortly after the 100512 release, to fix a critical device-mode error. No specific migration * N/A
* information applies to this release - see \ref Sec_Migration100512 for migration information of the previous release.
* *
* \section Sec_Migration100512 Migrating from 100219 to 100512 * \section Sec_Migration100513 Migrating from 100219 to 100513
* *
* <b>Non-USB Library Components</b> * <b>Non-USB Library Components</b>
* - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed * - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed

65
Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
Unescape View File

@ -186,22 +186,18 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
Write_Memory_Params.PollValue2; Write_Memory_Params.PollValue2;
uint8_t* NextWriteByte = Write_Memory_Params.ProgData; uint8_t* NextWriteByte = Write_Memory_Params.ProgData;
/* Check to see if the host has issued a SET ADDRESS command and we haven't sent a
* LOAD EXTENDED ADDRESS command (if needed, used when operating beyond the 128KB
* FLASH barrier) */
if (MustSetAddress)
{
if (CurrentAddress & (1UL << 31))
ISPTarget_LoadExtendedAddress();
MustSetAddress = false;
}
/* Check the programming mode desired by the host, either Paged or Word memory writes */ /* Check the programming mode desired by the host, either Paged or Word memory writes */
if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK) if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK)
{ {
uint16_t StartAddress = (CurrentAddress & 0xFFFF); uint16_t StartAddress = (CurrentAddress & 0xFFFF);
/* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
if (MustLoadExtendedAddress)
{
ISPTarget_LoadExtendedAddress();
MustLoadExtendedAddress = false;
}
/* Paged mode memory programming */ /* Paged mode memory programming */
for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++) for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++)
{ {
@ -252,7 +248,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
/* Check to see if the FLASH address has crossed the extended address boundary */ /* Check to see if the FLASH address has crossed the extended address boundary */
if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF)) if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF))
ISPTarget_LoadExtendedAddress(); MustLoadExtendedAddress = true;
} }
} }
else else
@ -263,6 +259,13 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
bool IsOddByte = (CurrentByte & 0x01); bool IsOddByte = (CurrentByte & 0x01);
uint8_t ByteToWrite = *(NextWriteByte++); uint8_t ByteToWrite = *(NextWriteByte++);
/* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
if (MustLoadExtendedAddress)
{
ISPTarget_LoadExtendedAddress();
MustLoadExtendedAddress = false;
}
SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
SPI_SendByte(CurrentAddress >> 8); SPI_SendByte(CurrentAddress >> 8);
SPI_SendByte(CurrentAddress & 0xFF); SPI_SendByte(CurrentAddress & 0xFF);
@ -291,14 +294,12 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
/* EEPROM just increments the address each byte, flash needs to increment on each word and /* EEPROM just increments the address each byte, flash needs to increment on each word and
* also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
* address boundary has been crossed */ * address boundary has been crossed */
if (V2Command == CMD_PROGRAM_EEPROM_ISP) if ((CurrentByte & 0x01) || (V2Command == CMD_PROGRAM_EEPROM_ISP))
{ {
CurrentAddress++; CurrentAddress++;
}
else if (IsOddByte) if ((V2Command != CMD_PROGRAM_EEPROM_ISP) && !(CurrentAddress & 0xFFFF))
{ MustLoadExtendedAddress = true;
if (!(++CurrentAddress & 0xFFFF))
ISPTarget_LoadExtendedAddress();
} }
} }
} }
@ -330,21 +331,17 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
Endpoint_Write_Byte(V2Command); Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK); Endpoint_Write_Byte(STATUS_CMD_OK);
/* Check to see if the host has issued a SET ADDRESS command and we haven't sent a
* LOAD EXTENDED ADDRESS command (if needed, used when operating beyond the 128KB
* FLASH barrier) */
if (MustSetAddress)
{
if (CurrentAddress & (1UL << 31))
ISPTarget_LoadExtendedAddress();
MustSetAddress = false;
}
/* Read each byte from the device and write them to the packet for the host */ /* Read each byte from the device and write them to the packet for the host */
for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++) for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++)
{ {
/* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
if (MustLoadExtendedAddress)
{
ISPTarget_LoadExtendedAddress();
MustLoadExtendedAddress = false;
}
/* Read the next byte from the desired memory space in the device */ /* Read the next byte from the desired memory space in the device */
SPI_SendByte(Read_Memory_Params.ReadMemoryCommand); SPI_SendByte(Read_Memory_Params.ReadMemoryCommand);
SPI_SendByte(CurrentAddress >> 8); SPI_SendByte(CurrentAddress >> 8);
@ -366,14 +363,12 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
/* EEPROM just increments the address each byte, flash needs to increment on each word and /* EEPROM just increments the address each byte, flash needs to increment on each word and
* also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
* address boundary has been crossed */ * address boundary has been crossed */
if (V2Command == CMD_READ_EEPROM_ISP) if ((CurrentByte & 0x01) || (V2Command == CMD_READ_EEPROM_ISP))
{ {
CurrentAddress++; CurrentAddress++;
}
else if (CurrentByte & 0x01) if ((V2Command != CMD_READ_EEPROM_ISP) && !(CurrentAddress & 0xFFFF))
{ MustLoadExtendedAddress = true;
if (!(++CurrentAddress & 0xFFFF))
ISPTarget_LoadExtendedAddress();
} }
} }

7
Projects/AVRISP-MKII/Lib/V2Protocol.c
Unescape View File

@ -39,8 +39,8 @@
/** Current memory address for FLASH/EEPROM memory read/write commands */ /** Current memory address for FLASH/EEPROM memory read/write commands */
uint32_t CurrentAddress; uint32_t CurrentAddress;
/** Flag to indicate that the next read/write operation must update the device's current address */ /** Flag to indicate that the next read/write operation must update the device's current extended FLASH address */
bool MustSetAddress; bool MustLoadExtendedAddress;
/** ISR to manage timeouts whilst processing a V2Protocol command */ /** ISR to manage timeouts whilst processing a V2Protocol command */
@ -251,7 +251,8 @@ static void V2Protocol_LoadAddress(void)
Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
MustSetAddress = true; if (CurrentAddress & (1UL << 31))
MustLoadExtendedAddress = true;
Endpoint_Write_Byte(CMD_LOAD_ADDRESS); Endpoint_Write_Byte(CMD_LOAD_ADDRESS);
Endpoint_Write_Byte(STATUS_CMD_OK); Endpoint_Write_Byte(STATUS_CMD_OK);

2
Projects/AVRISP-MKII/Lib/V2Protocol.h
Unescape View File

@ -84,7 +84,7 @@
/* External Variables: */ /* External Variables: */
#if !defined(__ASSEMBLER__) #if !defined(__ASSEMBLER__)
extern uint32_t CurrentAddress; extern uint32_t CurrentAddress;
extern bool MustSetAddress; extern bool MustLoadExtendedAddress;
#endif #endif
/* Function Prototypes: */ /* Function Prototypes: */

9
Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
Unescape View File

@ -44,11 +44,11 @@ static ParameterItem_t ParameterTable[] =
{ {
{ .ParamID = PARAM_BUILD_NUMBER_LOW, { .ParamID = PARAM_BUILD_NUMBER_LOW,
.ParamPrivileges = PARAM_PRIV_READ, .ParamPrivileges = PARAM_PRIV_READ,
.ParamValue = (LUFA_VERSION_INTEGER >> 8) }, .ParamValue = 0 },
{ .ParamID = PARAM_BUILD_NUMBER_HIGH, { .ParamID = PARAM_BUILD_NUMBER_HIGH,
.ParamPrivileges = PARAM_PRIV_READ, .ParamPrivileges = PARAM_PRIV_READ,
.ParamValue = (LUFA_VERSION_INTEGER & 0xFF), }, .ParamValue = 0 },
{ .ParamID = PARAM_HW_VER, { .ParamID = PARAM_HW_VER,
.ParamPrivileges = PARAM_PRIV_READ, .ParamPrivileges = PARAM_PRIV_READ,
@ -87,8 +87,7 @@ static ParameterItem_t ParameterTable[] =
/** Loads saved non-volatile parameter values from the EEPROM into the parameter table, as needed. */ /** Loads saved non-volatile parameter values from the EEPROM into the parameter table, as needed. */
void V2Params_LoadNonVolatileParamValues(void) void V2Params_LoadNonVolatileParamValues(void)
{ {
/* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM - /* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM */
* NB: Cannot call V2Protocol_SetParameterValue() here, as that will cause another EEPROM write! */
V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Rest_Polarity); V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Rest_Polarity);
} }
@ -154,7 +153,7 @@ void V2Params_SetParameterValue(const uint8_t ParamID, const uint8_t Value)
ParamInfo->ParamValue = Value; ParamInfo->ParamValue = Value;
/* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */ /* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
if (ParamID == PARAM_RESET_POLARITY) if ((ParamID == PARAM_RESET_POLARITY) && (eeprom_read_byte(&EEPROM_Rest_Polarity) != Value))
eeprom_write_byte(&EEPROM_Rest_Polarity, Value); eeprom_write_byte(&EEPROM_Rest_Polarity, Value);
} }

Write Preview
Loading…
Cancel
Save