Merge pull request #996 from milestogo/master
kinesis keyboard with subdirectories for different hardware - matches pull #911pull/1013/head
Jack Humbert
8 years ago
committed by
GitHub
commit
81b89f8b2b
@ -1,3 +1,5 @@
|
||||
SUBPROJECT_DEFAULT = alvicstep
|
||||
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
endif
|
||||
|
||||
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,105 @@
|
||||
#include "kinesis.h"
|
||||
|
||||
// begin section origin https://github.com/alvicstep/tmk_keyboard
|
||||
|
||||
void all_led_off(void)
|
||||
{
|
||||
PORTD = 0b11111111;
|
||||
}
|
||||
|
||||
void all_led_on(void)
|
||||
{
|
||||
PORTD = 0b00000000;
|
||||
}
|
||||
void num_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b11101111;
|
||||
}
|
||||
|
||||
void caps_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b01111111;
|
||||
}
|
||||
|
||||
void scroll_lock_led_on(void)
|
||||
{
|
||||
PORTD = 0b11011111;
|
||||
}
|
||||
void keypad_led_on(void)
|
||||
{
|
||||
PORTD = 0b10111111;
|
||||
}
|
||||
void blink_all_leds(void)
|
||||
{
|
||||
all_led_on();
|
||||
_delay_ms(500);
|
||||
|
||||
all_led_off();
|
||||
_delay_ms(100);
|
||||
|
||||
caps_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
num_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
scroll_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
keypad_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
//back
|
||||
|
||||
scroll_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
num_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
caps_lock_led_on();
|
||||
_delay_ms(100);
|
||||
|
||||
all_led_off();
|
||||
}
|
||||
|
||||
// End section origin https://github.com/alvicstep/tmk_keyboard
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
blink_all_leds();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
//Copyright 2014 Warren Janssens <warren.janssens@gmail.com>
|
||||
uint8_t leds = 0xF0;
|
||||
if (usb_led & 1 << USB_LED_NUM_LOCK)
|
||||
leds &= ~0x10;
|
||||
if (usb_led & 1 << USB_LED_CAPS_LOCK)
|
||||
leds &= ~0x80;
|
||||
if (usb_led & 1 << USB_LED_SCROLL_LOCK)
|
||||
leds &= ~0x20;
|
||||
PORTD = (PORTD & 0x0F) | leds;
|
||||
|
||||
led_set_user(usb_led);
|
||||
|
||||
}
|
||||
|
||||
|
||||
@ -0,0 +1,67 @@
|
||||
#ifndef KINESIS_ALVICSTEP_H
|
||||
#define KINESIS_ALVICSTEP_H
|
||||
|
||||
#include "../kinesis.h"
|
||||
|
||||
|
||||
#define KEYMAP( \
|
||||
k02,k22,k12,k01,k21,k11,k00,k20,k10, \
|
||||
k80,k70,k60,k50,k40,k30, \
|
||||
k81,k71,k61,k51,k41,k31, \
|
||||
k82,k72,k62,k52,k42,k32, \
|
||||
k83,k73,k63,k53,k43,k33, \
|
||||
k74,k64,k54,k34, \
|
||||
k36,k35, \
|
||||
k55, \
|
||||
k56,k46,k75, \
|
||||
k03,k23,k13,k04,k24,k14,k05,k85,k84, \
|
||||
k94,kA4,kB4,kD4,kE4,kF4, \
|
||||
k95,kA5,kB5,kD5,kE5,kF5, \
|
||||
k96,kA6,kB6,kD6,kE6,kF6, \
|
||||
k97,kA7,kB7,kD7,kE7,kF7, \
|
||||
k93,kB3,kD3,kE3, \
|
||||
k47,k66, \
|
||||
k67, \
|
||||
k87,k76,k86 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
|
||||
{ k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, KC_NO }, \
|
||||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, k56, KC_NO }, \
|
||||
{ k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, KC_NO }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86, k87}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \
|
||||
}
|
||||
|
||||
|
||||
/* Row pin configuration
|
||||
PF0 A
|
||||
PF1 B
|
||||
PF2 C
|
||||
PF3 G 0 = U4, 1 = U5
|
||||
|
||||
|
||||
r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 rA rB rC rD rE rF
|
||||
PB0 c0| f6 f8 f7 5 4 3 2 1 =+
|
||||
PB1 c1| f3 f5 f4 t r e w q TAB
|
||||
PB2 c2| ESC f2 f1 g f d s a CL
|
||||
PB3 c3| f9 f11 f10 b v c x z LS UP DN [{ ]}
|
||||
PB4 c4| f12 SL PS RT LT §± `~ 6 7 8 9 0 -_
|
||||
PB5 c5| PB PGM KPD y u i o p \
|
||||
PB6 c6| LC DL BS RC EN SP h j k l ;: '"
|
||||
PB7 c7| RA PU PD n m ,< .> /? RS
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,35 @@
|
||||
#ifndef ALVICSTEP_CONFIG_H
|
||||
#define ALVICSTEP_CONFIG_H
|
||||
|
||||
#include "../config.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 16
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
//Passed through the port multipler, so 4 pins =16
|
||||
#define MATRIX_ROW_PINS { F0,F1, F2, F3 }
|
||||
|
||||
// May be upside down.
|
||||
#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
|
||||
#endif
|
||||
|
Before Width: | Height: | Size: 174 KiB After Width: | Height: | Size: 174 KiB |
|
Before Width: | Height: | Size: 336 KiB After Width: | Height: | Size: 336 KiB |
|
Before Width: | Height: | Size: 260 KiB After Width: | Height: | Size: 260 KiB |
|
Before Width: | Height: | Size: 171 KiB After Width: | Height: | Size: 171 KiB |
@ -0,0 +1,46 @@
|
||||
kinesis-advantage keyboard firmware
|
||||
======================
|
||||
|
||||
This directory is called alvicstep because https://github.com/alvicstep did the heavy work and took the photos in the doc directory.
|
||||
alvicstep did NOT do anything related to the QMK implementation, so don't bug him/her.
|
||||
|
||||
There are other ways of replacing the CPU in the kinesis, this one uses jumper wires from the Teensy to the original DIP socket
|
||||
|
||||
|
||||
## Kinesis specific information
|
||||
This is a port of https://github.com/alvicstep/tmk_keyboard,
|
||||
which is a fork of https://github.com/wjanssens/tmk_keyboard,
|
||||
which is based on work from https://github.com/chrisandreae/keyboard-firmware
|
||||
|
||||
If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK.
|
||||
I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead.
|
||||
|
||||
Not yet implemented:
|
||||
- Kinesis EEProm reading or writing
|
||||
- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7
|
||||
|
||||
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, simply run `make`.
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
|
||||
|
||||
$ make keymap=[default|jack|<name>]
|
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
|
||||
@ -0,0 +1,10 @@
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
# just silently stop, since we need to upload with teensy uploader
|
||||
upload: build
|
||||
|
||||
|
||||
|
||||
|
||||
@ -0,0 +1,93 @@
|
||||
#include "kinesis.h"
|
||||
|
||||
#define _DVORAK 0 // Base Dvorak layer
|
||||
#define _MEDIA 1 // Media layer
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_DVORAK] = KEYMAP(
|
||||
// left hand
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5,
|
||||
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y,
|
||||
KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I,
|
||||
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X,
|
||||
KC_ESC, KC_LBRC, KC_DOWN, KC_UP,
|
||||
// left thumb
|
||||
KC_LGUI, KC_LCTL,
|
||||
KC_LALT,
|
||||
KC_BSPC, KC_DEL, TG(_MEDIA),
|
||||
// right hand
|
||||
KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_FN0, KC_1,
|
||||
KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL,
|
||||
KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH,
|
||||
KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS,
|
||||
KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,
|
||||
KC_LEFT, KC_RIGHT, KC_RBRC, KC_BSLS,
|
||||
// right thumb
|
||||
KC_RCTL, KC_RGUI,
|
||||
KC_RALT,
|
||||
TG(_MEDIA), KC_ENT, KC_SPC
|
||||
),
|
||||
|
||||
[_MEDIA] = KEYMAP(
|
||||
// left hand
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_BTN4, KC_BTN3, KC_BTN2, KC_BTN1, KC_NO,
|
||||
KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,
|
||||
KC_NO, KC_NO, KC_MS_D, KC_MS_U,
|
||||
// left thumb
|
||||
KC_NO, KC_NO,
|
||||
KC_NO,
|
||||
KC_NO, KC_NO, KC_TRNS,
|
||||
// right hand
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_POWER,
|
||||
KC_NO, KC_VOLU, KC_MS_U, KC_VOLD, KC_NO, KC_NO,
|
||||
KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO,
|
||||
KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, KC_NO,
|
||||
KC_MS_L, KC_MS_R, KC_NO, KC_NO,
|
||||
// right thumb
|
||||
KC_NO, KC_NO,
|
||||
KC_NO,
|
||||
KC_TRNS, KC_ENT, KC_NO
|
||||
)
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
@ -0,0 +1,21 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,8 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
@ -1,67 +1,23 @@
|
||||
#ifndef KINESIS_H
|
||||
#define KINESIS_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#ifdef SUBPROJECT_alvicstep
|
||||
#include "alvicstep.h"
|
||||
#endif
|
||||
#ifdef SUBPROJECT_stapelberg
|
||||
#include "stapelberg.h"
|
||||
#endif
|
||||
|
||||
#define KEYMAP( \
|
||||
k02,k22,k12,k01,k21,k11,k00,k20,k10, \
|
||||
k80,k70,k60,k50,k40,k30, \
|
||||
k81,k71,k61,k51,k41,k31, \
|
||||
k82,k72,k62,k52,k42,k32, \
|
||||
k83,k73,k63,k53,k43,k33, \
|
||||
k74,k64,k54,k34, \
|
||||
k36,k35, \
|
||||
k55, \
|
||||
k56,k46,k75, \
|
||||
k03,k23,k13,k04,k24,k14,k05,k85,k84, \
|
||||
k94,kA4,kB4,kD4,kE4,kF4, \
|
||||
k95,kA5,kB5,kD5,kE5,kF5, \
|
||||
k96,kA6,kB6,kD6,kE6,kF6, \
|
||||
k97,kA7,kB7,kD7,kE7,kF7, \
|
||||
k93,kB3,kD3,kE3, \
|
||||
k47,k66, \
|
||||
k67, \
|
||||
k87,k76,k86 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
|
||||
{ k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, KC_NO }, \
|
||||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, k56, KC_NO }, \
|
||||
{ k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \
|
||||
{ k70, k71, k72, k73, k74, k75, k76, KC_NO }, \
|
||||
{ k80, k81, k82, k83, KC_NO ,KC_NO, k86, k87}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, k84, k85}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \
|
||||
{ KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \
|
||||
}
|
||||
#include "quantum.h"
|
||||
|
||||
|
||||
/* 4y0 A 4y1 B 4y2 4y3 D 4y4 E 4y5 F 4y6 G 4y7 H 5y0 I 5y1 J 5y2 K 5y3 L 5y4 M 5y5 N 5y6 O 5y7 P */
|
||||
void all_led_off(void);
|
||||
void all_led_on(void);
|
||||
void num_lock_led_on(void);
|
||||
void caps_lock_led_on(void);
|
||||
void scroll_lock_led_on(void);
|
||||
void keypad_led_on(void);
|
||||
|
||||
/*
|
||||
0 1 2 3 4 5 6 7 8 9 A B C D E F
|
||||
A B C D E F G H I J K L M N O P
|
||||
4y0 4y1 4y2 4y3 4y4 4y5 4y6 4y7 5y0 5y1 5y2 5y3 5y4 5y5 5y6 5y7
|
||||
r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15
|
||||
0 PB0 21 c0 f6 f8 f7 5 4 3 2 1 =+
|
||||
1 PB1 22 c1 f3 f5 f4 t r e w q TAB
|
||||
2 PB2 23 c2 ESC f2 f1 g f d s a CL
|
||||
3 PB3 24 c3 f9 f11 f10 b v c x z LS UP DN [{ ]}
|
||||
4 PB4 25 c4 f12 SL PS RT LT §± `~ 6 7 8 9 0 -_
|
||||
5 PB5 26 c5 PB PGM KPD LA HM END y u i o p \
|
||||
6 PB6 27 c6 LC DEL BS RC ENT SP h j k l ;: '"
|
||||
7 PB7 28 c7 RA PU PD n m ,< .> /? RS
|
||||
*/
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,50 @@
|
||||
#ifndef STAPELBERG_CONFIG_H
|
||||
#define STAPELBERG_CONFIG_H
|
||||
|
||||
#include "../config.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0002
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 15
|
||||
#define MATRIX_COLS 7
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C0, C1, C2, C3, C4, C5, C6 }
|
||||
#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* don't know if this should be defined at the board or top level. Assuming board
|
||||
#define MOUSEKEY_DELAY 100
|
||||
#define MOUSEKEY_INTERVAL 20
|
||||
#define MOUSEKEY_MAX_SPEED 3
|
||||
#define MOUSEKEY_TIME_TO_MAX 10
|
||||
*/
|
||||
|
||||
#define IGNORE_MOD_TAP_INTERRUPT
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
|
||||
#endif
|
||||
|
After Width: | Height: | Size: 126 KiB |
|
After Width: | Height: | Size: 96 KiB |
|
After Width: | Height: | Size: 117 KiB |
@ -0,0 +1,55 @@
|
||||
# kinesis_stapelberg keyboard firmware
|
||||
|
||||
This folder contains the firmware customization required to run QMK on the custom controller for the Kinesis Advantage created by Michael Stapelberg.
|
||||
It differs from the `alvicstep keyboard in that the existing QMK Kinesis Advantage project uses the existing controller board provided by Kinesis.
|
||||
|
||||
The controller board hardware is described
|
||||
[here](http://michael.stapelberg.de/Artikel/kinesis_custom_controller)
|
||||
|
||||
Mapping the pin assignments was done using the corresponding matrix description provided at this
|
||||
[link](https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec)
|
||||
|
||||
This code makes no attempt to drive the four LEDs provided on the controller board.
|
||||
|
||||
|
||||
## Building the Hardware
|
||||
|
||||
If you want to perform this customization, these parts may be helpful.
|
||||
|
||||
| Function | Quantity | Vendor | Part Number |
|
||||
| ------------------------------------------------------ | -------- | ------- | ------------ |
|
||||
| 13 pin connector for function keys and finger keywells | 4 | Digi-Key | WM14526-ND |
|
||||
| 10 pin headers for thumb clusters | 4 | Digi-Key | 609-3250-ND |
|
||||
| 8 pin cable for thumb clusters | 2 | Digi-Key | SAM8928-ND |
|
||||
| Teensy++ 2.0 | 1 | Digi-Key | 1528-1056-ND |
|
||||
| 2 pin right angle header for reset | 1 | Digi-Key | 3M9467-ND |
|
||||
| Reset cables | 2 | Sparkfun | PRT-09140 |
|
||||
|
||||
The board and connections are shown here
|
||||
|
||||
|
||||
The Teensy mounting detail can be seen here.
|
||||
I used a socket for prototyping.
|
||||
|
||||
|
||||
|
||||
Since the proper mounting of the Teensy board places the reset button in a tight space, I added a 2-pin header to the reset and ground pins on the edge of the board.
|
||||
Shorting these two pins together will reset the board.
|
||||
I also put female to male header jumper cables on these so they could be accessed outside the enclosure.
|
||||
The exterior cables can be seen here.
|
||||
|
||||
|
||||
|
||||
## Keymaps
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, run `make default` while in the
|
||||
`kinesis_stapelberg` working directory.
|
||||
|
||||
### Dvorak
|
||||
|
||||
This keymap contains a dvorak implementation as well as media and symbol layers.
|
||||
|
||||
Run `make dvorak` while in the `kinesis_stapelberg` working directory.
|
||||
|
||||
@ -0,0 +1,10 @@
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
# just silently stop, since we need to upload with teensy uploader
|
||||
upload: build
|
||||
|
||||
|
||||
|
||||
|
||||
@ -0,0 +1,28 @@
|
||||
#include "stapelberg.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
@ -0,0 +1,72 @@
|
||||
#ifndef KINESIS_STAPELBERG_H
|
||||
#define KINESIS_STAPELBERG_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguments as on the physical keyboard
|
||||
// The second converts the arguments into the 2-D scanned array
|
||||
|
||||
#define KEYMAP( \
|
||||
kC0,kD0,kE0,kC1,kD1,kE1,kC2,kD2,kE2, \
|
||||
k00,k10,k20,k30,k40,k50, \
|
||||
k01,k11,k21,k31,k41,k51, \
|
||||
k02,k12,k22,k32,k42,k52, \
|
||||
k03,k13,k23,k33,k43,k53, \
|
||||
k14,k24,k34,k54, \
|
||||
k56,k55, \
|
||||
k35, \
|
||||
k36,k46,k25, \
|
||||
kC3,kD3,kE3,kC4,kD4,kE4,kC5,kE5,kD5, \
|
||||
k60,k70,k80,k90,kA0,kB0, \
|
||||
k61,k71,k81,k91,kA1,kB1, \
|
||||
k62,k72,k82,k92,kA2,kB2, \
|
||||
k63,k73,k83,k93,kA3,kB3, \
|
||||
k64,k84,k94,kA4, \
|
||||
k96,k85, \
|
||||
k86, \
|
||||
k66,k75,k65 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k10, k11, k12, k13, k14, KC_NO, KC_NO }, \
|
||||
{ k20, k21, k22, k23, k24, k25, KC_NO }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36 }, \
|
||||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46 }, \
|
||||
{ k50, k51, k52, k53, k54, k55, k56 }, \
|
||||
{ k60, k61, k62, k63, k64, k65, k66 }, \
|
||||
{ k70, k71, k72, k73, KC_NO, k75, KC_NO }, \
|
||||
{ k80, k81, k82, k83, k84, k85, k86 }, \
|
||||
{ k90, k91, k92, k93, k94, KC_NO, k96 }, \
|
||||
{ kA0, kA1, kA2, kA3, kA4, KC_NO, KC_NO }, \
|
||||
{ kB0, kB1, kB2, kB3, KC_NO, KC_NO, KC_NO }, \
|
||||
{ kC0, kC1, kC2, kC3, kC4, kC5, KC_NO }, \
|
||||
{ kD0, kD1, kD2, kD3, kD4, kD5, KC_NO }, \
|
||||
{ kE0, kE1, kE2, kE3, kE4, kE5, KC_NO } \
|
||||
}
|
||||
|
||||
/*
|
||||
This is the Stapelberg matrix as published at
|
||||
https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec
|
||||
Along with the pins for each row and column
|
||||
PB0 PB1 PB2 PB3 PB4 PB5 PB6
|
||||
kx0 kx1 kx2 kx3 kx4 kx5 kx6
|
||||
PD0 k0x Row: EQL TAB CAP LSH X2 -- --
|
||||
PD1 k1x Row: 1 Q A Z BQ -- --
|
||||
PD2 k2x Row: 2 W S X INS END --
|
||||
PD3 k3x Row: 3 E D C LFT HOM BAK
|
||||
PD4 k4x Row: 4 R F V -- -- DEL
|
||||
PD5 k5x Row: 5 T G B RT LAL LCT
|
||||
PD6 k6x Row: 6 Y H N UP SPC PGD
|
||||
PD7 k7x Row: 7 U J M -- RET --
|
||||
PB0 k8x Row: 8 I K COM DWN RCT PGU
|
||||
PB1 k9x Row: 9 O L PER LBR -- RAL
|
||||
PB2 kAx Row: 0 P SEM SLA RBR -- --
|
||||
PB3 kBx Row: MIN BSL APO RSH X1 -- --
|
||||
PB4 kCx Row: ESC F3 F6 F9 F12 PAU --
|
||||
PB5 kDx Row: F1 F4 F7 F10 PRT PRG --
|
||||
PB6 kEx Row: F2 F5 F8 F11 SLK KEY --
|
||||
*/
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
Loading…
Reference in new issue