Add Levinson rev2 (#1939)

* Add levinson rev2 files

* Add hexwire keymap

* Remove redefinition of backlight defines
pull/1944/head
Danny 7 years ago committed by Jack Humbert
parent 2d77f9cbb9
commit 83af62322c

@ -23,8 +23,4 @@
#define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_VAL_STEP 8
#define BACKLIGHT_PIN B6
//#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 7
#endif #endif

@ -98,7 +98,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LOWER] = KEYMAP( \ [_LOWER] = KEYMAP( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ BL_STEP, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
), ),

@ -0,0 +1,108 @@
Hexwire's Let's Split Layout
============================
### Changes from default layout
- Main layer
- The right space bar key has been changed to backspace, as I only hit space with my left thumb
- Backtick is at the lower right and also serves goes to the 3rd function layer when held
- Enter key acts as shift when held
- Escape key acts as control when held
- Minus key at upper right
- Lower layer
- Numbers are on the lower layer, to make it easier to use a numpad on the right hand
- Arrow keys
- Straight and curly brackets in the middle two columns
- Screenshot keys for MacOS
- Upper layer
- Symbols are on the upper layer
- Media keys
- Page Up/Down, Home/End
- 3rd function layer
- Function keys
## Layouts
### Qwerty
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### Colemak
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### Dvorak
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , O , E , U , I , D , H , R , N , S ,SLSH,
|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### Lower
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
|----+----+----+----+----+----| |----+----+----+----+----+----|
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , DEL , , P0 ,PDOT, ,
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### Raise
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
|----+----+----+----+----+----| |----+----+----+----+----+----|
MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
`----+----+----+----+----+----' `----+----+----+----+----+----'
```
### 3rd function layer
```
,----+----+----+----+----+----. ,----+----+----+----+----+----.
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
`----+----+----+----+----+----' `----+----+----+----+----+----'
```

@ -0,0 +1,26 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define _MASTER_RIGHT
// #define EE_HANDS
#define TAPPING_TERM 150
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 8
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

@ -0,0 +1,206 @@
#include "levinson.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
#define _QWERTY 0
#define _COLEMAK 1
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
#define _FN3 5
#define _FN4 6
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
FN3,
FN4,
ADJUST,
};
#define KC_ KC_TRNS
#define _______ KC_TRNS
#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen
#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
#define KC_X0 MT(MOD_LCTL, KC_ESC)
#define KC_X1 LOWER
#define KC_X2 RAISE
#define KC_X3 LT(_FN3, KC_GRV)
#define KC_X4 MT(MOD_LSFT, KC_ENT)
#define KC_X5 BL_STEP
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X5 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_COLEMAK] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_DVORAK] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X0 , A , O , E , U , I , D , H , T , N , S ,SLSH,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_LOWER] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , DEL , , P0 ,PDOT, ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_RAISE] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
[_FN3] = KC_KEYMAP(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , , ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , , , , , ,
//`----+----+----+----+----+----' `----+----+----+----+----+----'
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = KEYMAP( \
_______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
#ifdef AUDIO_ENABLE
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
#endif
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_colemak);
#endif
persistent_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case DVORAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_dvorak);
#endif
persistent_default_layer_set(1UL<<_DVORAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

@ -0,0 +1,5 @@
RGBLIGHT_ENABLE = yes
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

@ -3,7 +3,11 @@
#include "quantum.h" #include "quantum.h"
#ifdef KEYBOARD_levinson_rev1
#include "rev1.h" #include "rev1.h"
#else
#include "rev2.h"
#endif
// Used to create a keymap using only KC_ prefixed keys // Used to create a keymap using only KC_ prefixed keys
#define KC_KEYMAP( \ #define KC_KEYMAP( \

@ -9,12 +9,12 @@ Hardware Availability: [Keebio](https://keeb.io)
Make example for this keyboard (after setting up your build environment): Make example for this keyboard (after setting up your build environment):
make levinson/rev1:default make levinson/rev2:default
Example of flashing this keyboard: Example of flashing this keyboard:
make levinson/rev1:default:avrdude make levinson/rev2:default:avrdude
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
A build guide for this keyboard can be found here: [Nyquist Build Guide](https://docs.keeb.io) A build guide for this keyboard can be found here: [Levinson Build Guide](https://docs.keeb.io)

@ -66,6 +66,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define ws2812_PORTREG PORTD #define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD #define ws2812_DDRREG DDRD
/* Backlight LEDs */
#define BACKLIGHT_PIN B6
#define BACKLIGHT_LEVELS 7
/* /*
* Feature disable options * Feature disable options
* These options are also useful to firmware size reduction. * These options are also useful to firmware size reduction.

@ -0,0 +1,93 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H
#include "../config.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCEEB
#define PRODUCT_ID 0x1146
#define DEVICE_VER 0x0200
#define MANUFACTURER Keebio
#define PRODUCT Levinson
#define DESCRIPTION Split 40 percent ortholinear keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 6
// wiring of each half
#define MATRIX_ROW_PINS { D4, D7, E6, B4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
#define CATERINA_BOOTLOADER
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 7
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/* Backlight LEDs */
#define BACKLIGHT_PIN B5
#define BACKLIGHT_LEVELS 7
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

@ -0,0 +1,39 @@
#include "levinson.h"
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
#ifdef SSD1306OLED
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
#endif
void matrix_init_kb(void) {
#ifdef AUDIO_ENABLE
_delay_ms(20); // gets rid of tick
PLAY_SONG(tone_startup);
#endif
// // green led on
// DDRD |= (1<<5);
// PORTD &= ~(1<<5);
// // orange led on
// DDRB |= (1<<0);
// PORTB &= ~(1<<0);
matrix_init_user();
};
void shutdown_user(void) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_goodbye);
_delay_ms(150);
stop_all_notes();
#endif
}

@ -0,0 +1,60 @@
#ifndef REV2_H
#define REV2_H
#include "../levinson.h"
//void promicro_bootloader_jmp(bool program);
#include "quantum.h"
#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
#include <avr/io.h>
#include <avr/interrupt.h>
#endif
#endif
//void promicro_bootloader_jmp(bool program);
#ifndef FLIP_HALF
// Standard Keymap
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
#define KEYMAP( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
{ \
{ L00, L01, L02, L03, L04, L05 }, \
{ L10, L11, L12, L13, L14, L15 }, \
{ L20, L21, L22, L23, L24, L25 }, \
{ L30, L31, L32, L33, L34, L35 }, \
{ R05, R04, R03, R02, R01, R00 }, \
{ R15, R14, R13, R12, R11, R10 }, \
{ R25, R24, R23, R22, R21, R20 }, \
{ R35, R34, R33, R32, R31, R30 } \
}
#else
// Keymap with right side flipped
// (TRRS jack on both halves are to the right)
#define KEYMAP( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
{ \
{ L00, L01, L02, L03, L04, L05 }, \
{ L10, L11, L12, L13, L14, L15 }, \
{ L20, L21, L22, L23, L24, L25 }, \
{ L30, L31, L32, L33, L34, L35 }, \
{ R00, R01, R02, R03, R04, R05 }, \
{ R10, R11, R12, R13, R14, R15 }, \
{ R20, R21, R22, R23, R24, R25 }, \
{ R30, R31, R32, R33, R34, R35 } \
}
#endif
#endif

@ -0,0 +1 @@
BACKLIGHT_ENABLE = yes

@ -77,4 +77,4 @@ CUSTOM_MATRIX = yes
LAYOUTS = ortho_4x12 LAYOUTS = ortho_4x12
DEFAULT_FOLDER = levinson/rev1 DEFAULT_FOLDER = levinson/rev2

Loading…
Cancel
Save