forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add new Printer class USB bootloader.

Browse Source
pull/1469/head
Dean Camera 12 years ago
parent d88c6edea4
commit 8a43da6b37
7 changed files with 890 additions and 1 deletions
Show Stats Download Patch File Download Diff File

361
Bootloaders/Printer/BootloaderPrinter.c
Unescape View File

@ -0,0 +1,361 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the Printer class bootloader. This file contains the complete bootloader logic.
*/
#include "BootloaderPrinter.h"
/** Intel HEX parser state machine state information, to track the contents of
* a HEX file streamed in as a sequence of arbitrary bytes.
*/
struct
{
/** Current HEX parser state machine state. */
uint8_t ParserState;
/** Previously decoded numerical byte of data. */
uint8_t PrevData;
/** Currently decoded numerical byte of data. */
uint8_t Data;
/** Indicates if both bytes that correspond to a single decoded numerical
* byte of data (HEX encodes values in ASCII HEX, two characters per byte)
* have been read.
*/
bool ReadMSB;
/** Intel HEX record type of the current Intel HEX record. */
uint8_t RecordType;
/** Numerical bytes of data remaining to be read in the current record. */
uint8_t DataRem;
/** Checksum of the current record received so far. */
uint8_t Checksum;
/** Starting address of the last addressed FLASH page. */
uint32_t PageStartAddress;
/** Current 32-bit byte address in FLASH being targeted. */
uint32_t CurrAddress;
} HEXParser =
{
.ParserState = HEX_PARSE_STATE_WAIT_LINE
};
/** Indicates if there is data waiting to be written to a physical page of
* memory in FLASH.
*/
static bool PageDirty = false;
/**
* Determines if a given input byte of data is an ASCII encoded HEX value.
*
* \note Input HEX bytes are expected to be in uppercase only.
*
* \param[in] Byte ASCII byte of data to check
*
* \return Boolean \c true if the input data is ASCII encoded HEX, false otherwise.
*/
static bool IsHex(const char Byte)
{
return ((Byte >= 'A') && (Byte <= 'F')) ||
((Byte >= '0') && (Byte <= '9'));
}
/**
* Converts a given input byte of data from an ASCII encoded HEX value to an integer value.
*
* \note Input HEX bytes are expected to be in uppercase only.
*
* \param[in] Byte ASCII byte of data to convert
*
* \return Integer converted value of the input ASCII encoded HEX byte of data.
*/
static uint8_t HexToDecimal(const char Byte)
{
if ((Byte >= 'A') && (Byte <= 'F'))
return (10 + (Byte - 'A'));
else if ((Byte >= '0') && (Byte <= '9'))
return (Byte - '0');
return 0;
}
/**
* Parses an input Intel HEX formatted stream one character at a time, loading
* the data contents into the device's internal FLASH memory.
*
* \param[in] ReadCharacter Next input ASCII byte of data to parse
*/
static void ParseIntelHEXByte(const char ReadCharacter)
{
if ((HEXParser.ParserState == HEX_PARSE_STATE_WAIT_LINE) || (ReadCharacter == ':'))
{
HEXParser.Checksum = 0;
HEXParser.CurrAddress &= ~0xFFFF;
HEXParser.ParserState = HEX_PARSE_STATE_WAIT_LINE;
HEXParser.ReadMSB = false;
if (ReadCharacter == ':')
HEXParser.ParserState = HEX_PARSE_STATE_BYTE_COUNT;
return;
}
if (!IsHex(ReadCharacter))
return;
HEXParser.Data = (HEXParser.Data << 4) | HexToDecimal(ReadCharacter);
HEXParser.ReadMSB = !HEXParser.ReadMSB;
if (HEXParser.ReadMSB)
return;
if (HEXParser.ParserState != HEX_PARSE_STATE_CHECKSUM)
HEXParser.Checksum += HEXParser.Data;
switch (HEXParser.ParserState)
{
case HEX_PARSE_STATE_BYTE_COUNT:
HEXParser.DataRem = HEXParser.Data;
HEXParser.ParserState = HEX_PARSE_STATE_ADDRESS_HIGH;
break;
case HEX_PARSE_STATE_ADDRESS_HIGH:
HEXParser.CurrAddress |= ((uint16_t)HEXParser.Data << 8);
HEXParser.ParserState = HEX_PARSE_STATE_ADDRESS_LOW;
break;
case HEX_PARSE_STATE_ADDRESS_LOW:
HEXParser.CurrAddress |= HEXParser.Data;
HEXParser.ParserState = HEX_PARSE_STATE_RECORD_TYPE;
break;
case HEX_PARSE_STATE_RECORD_TYPE:
HEXParser.RecordType = HEXParser.Data;
HEXParser.ParserState = (HEXParser.DataRem ? HEX_PARSE_STATE_READ_DATA : HEX_PARSE_STATE_CHECKSUM);
break;
case HEX_PARSE_STATE_READ_DATA:
HEXParser.DataRem--;
if (HEXParser.DataRem & 0x01)
{
HEXParser.PrevData = HEXParser.Data;
break;
}
switch (HEXParser.RecordType)
{
case HEX_RECORD_TYPE_Data:
if (!(PageDirty))
{
boot_page_erase(HEXParser.PageStartAddress);
boot_spm_busy_wait();
PageDirty = true;
}
boot_page_fill(HEXParser.CurrAddress, ((uint16_t)HEXParser.Data << 8) | HEXParser.PrevData);
HEXParser.CurrAddress += 2;
uint32_t NewPageStartAddress = (HEXParser.CurrAddress & ~(SPM_PAGESIZE - 1));
if (PageDirty && (HEXParser.PageStartAddress != NewPageStartAddress))
{
boot_page_write(HEXParser.PageStartAddress);
boot_spm_busy_wait();
HEXParser.PageStartAddress = NewPageStartAddress;
PageDirty = false;
}
break;
case HEX_RECORD_TYPE_ExtendedLinearAddress:
HEXParser.CurrAddress |= (uint32_t)HEXParser.Data << (HEXParser.DataRem ? 24 : 16);
break;
}
if (!HEXParser.DataRem)
HEXParser.ParserState = HEX_PARSE_STATE_CHECKSUM;
break;
case HEX_PARSE_STATE_CHECKSUM:
if (HEXParser.Data != ((~HEXParser.Checksum + 1) & 0xFF))
break;
uint32_t NewPageStartAddress = (HEXParser.CurrAddress & ~(SPM_PAGESIZE - 1));
if (PageDirty && (HEXParser.PageStartAddress != NewPageStartAddress))
{
boot_page_write(HEXParser.PageStartAddress);
boot_spm_busy_wait();
HEXParser.PageStartAddress = NewPageStartAddress;
PageDirty = false;
}
break;
default:
HEXParser.ParserState = HEX_PARSE_STATE_WAIT_LINE;
break;
}
}
/** Main program entry point. This routine configures the hardware required by the application, then
* enters a loop to run the application tasks in sequence.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
GlobalInterruptEnable();
for (;;)
{
USB_USBTask();
Endpoint_SelectEndpoint(PRINTER_OUT_EPADDR);
/* Check if we have received new printer data from the host */
if (Endpoint_IsOUTReceived()) {
LEDs_ToggleLEDs(LEDMASK_USB_BUSY);
/* Read all bytes of data from the host and parse them */
while (Endpoint_IsReadWriteAllowed())
{
/* Feed the next byte of data to the HEX parser */
ParseIntelHEXByte(Endpoint_Read_8());
}
/* Send an ACK to the host, ready for the next data packet */
Endpoint_ClearOUT();
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Relocate the interrupt vector table to the bootloader section */
MCUCR = (1 << IVCE);
MCUCR = (1 << IVSEL);
/* Hardware Initialization */
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
void EVENT_USB_Device_Connect(void)
{
/* Indicate USB enumerating */
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the Mass Storage management task.
*/
void EVENT_USB_Device_Disconnect(void)
{
/* Indicate USB not ready */
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the Mass Storage management task started.
*/
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
/* Setup Printer Data Endpoints */
ConfigSuccess &= Endpoint_ConfigureEndpoint(PRINTER_IN_EPADDR, EP_TYPE_BULK, PRINTER_IO_EPSIZE, 1);
ConfigSuccess &= Endpoint_ConfigureEndpoint(PRINTER_OUT_EPADDR, EP_TYPE_BULK, PRINTER_IO_EPSIZE, 1);
/* Indicate endpoint configuration success or failure */
LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
}
/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
* the device from the USB host before passing along unhandled control requests to the library for processing
* internally.
*/
void EVENT_USB_Device_ControlRequest(void)
{
/* Process Printer specific control requests */
switch (USB_ControlRequest.bRequest)
{
case PRNT_REQ_GetDeviceID:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Generic printer IEEE 1284 identification string, will bind to an in-built driver on
* Windows systems, and will fall-back to a text-only printer driver on *nix.
*/
const char PrinterIDString[] =
"MFG:Generic;"
"MDL:Generic_/_Text_Only;"
"CMD:1284.4;"
"CLS:PRINTER";
Endpoint_ClearSETUP();
Endpoint_Write_16_BE(sizeof(PrinterIDString));
Endpoint_Write_Control_Stream_LE(PrinterIDString, strlen(PrinterIDString));
Endpoint_ClearStatusStage();
}
break;
case PRNT_REQ_GetPortStatus:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
Endpoint_Write_8(PRNT_PORTSTATUS_NOTERROR | PRNT_PORTSTATUS_SELECT);
Endpoint_ClearStatusStage();
}
break;
case PRNT_REQ_SoftReset:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
}
break;
}
}

99
Bootloaders/Printer/BootloaderPrinter.h
Unescape View File

@ -0,0 +1,99 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for Printer.c.
*/
#ifndef _PRINTER_H_
#define _PRINTER_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include "Descriptors.h"
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
/* Enums: */
/** Intel HEX parser state machine states. */
enum HEX_Parser_States_t
{
HEX_PARSE_STATE_WAIT_LINE, /**< Parser is waiting for a HEX Start of Line character. */
HEX_PARSE_STATE_BYTE_COUNT, /**< Parser is waiting for a record byte count. */
HEX_PARSE_STATE_ADDRESS_HIGH, /**< Parser is waiting for the MSB of a record address. */
HEX_PARSE_STATE_ADDRESS_LOW, /**< Parser is waiting for the LSB of a record address. */
HEX_PARSE_STATE_RECORD_TYPE, /**< Parser is waiting for the record type. */
HEX_PARSE_STATE_READ_DATA, /**< Parser is waiting for more data in the current record. */
HEX_PARSE_STATE_CHECKSUM, /**< Parser is waiting for the checksum of the current record. */
};
/** Intel HEX record types, used to indicate the type of record contained in a line of a HEX file. */
enum HEX_Record_Types_t
{
HEX_RECORD_TYPE_Data = 0, /**< Record contains loadable data. */
HEX_RECORD_TYPE_EndOfFile = 1, /**< End of file record. */
HEX_RECORD_TYPE_ExtendedSegmentAddress = 2, /**< Extended segment start record. */
HEX_RECORD_TYPE_StartSegmentAddress = 3, /**< Normal segment start record. */
HEX_RECORD_TYPE_ExtendedLinearAddress = 4, /**< Extended linear address start record. */
HEX_RECORD_TYPE_StartLinearAddress = 5, /**< Linear address start record. */
};
/* Function Prototypes: */
void SetupHardware(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_ControlRequest(void);
#endif

93
Bootloaders/Printer/Config/LUFAConfig.h
Unescape View File

@ -0,0 +1,93 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief LUFA Library Configuration Header File
*
* This header file is used to configure LUFA's compile time options,
* as an alternative to the compile time constants supplied through
* a makefile.
*
* For information on what each token does, refer to the LUFA
* manual section "Summary of Compile Tokens".
*/
#ifndef _LUFA_CONFIG_H_
#define _LUFA_CONFIG_H_
#if (ARCH == ARCH_AVR8)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define ORDERED_EP_CONFIG
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
#define USB_DEVICE_ONLY
// #define USB_HOST_ONLY
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
#define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
#define USE_RAM_DESCRIPTORS
// #define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
#define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
#define DEVICE_STATE_AS_GPIOR 0
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
// #define INTERRUPT_CONTROL_ENDPOINT
#define NO_DEVICE_REMOTE_WAKEUP
#define NO_DEVICE_SELF_POWER
/* USB Host Mode Driver Related Tokens: */
// #define HOST_STATE_AS_GPIOR {Insert Value Here}
// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#else
#error Unsupported architecture for this LUFA configuration file.
#endif
#endif

209
Bootloaders/Printer/Descriptors.c
Unescape View File

@ -0,0 +1,209 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Descriptors, for library use when in USB device mode. Descriptors are special
* computer-readable structures which the host requests upon device enumeration, to determine
* the device's capabilities and functions.
*/
#include "Descriptors.h"
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
const USB_Descriptor_Device_t DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
.Class = USB_CSCP_NoDeviceClass,
.SubClass = USB_CSCP_NoDeviceSubclass,
.Protocol = USB_CSCP_NoDeviceProtocol,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
.VendorID = 0x03EB,
.ProductID = 0xFFEF,
.ReleaseNumber = VERSION_BCD(00.01),
.ManufacturerStrIndex = 0x01,
.ProductStrIndex = 0x02,
.SerialNumStrIndex = NO_DESCRIPTOR,
.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};
/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
* of the device in one of its supported configurations, including information about any device interfaces
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
const USB_Descriptor_Configuration_t ConfigurationDescriptor =
{
.Config =
{
.Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
.TotalInterfaces = 1,
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
.ConfigAttributes = USB_CONFIG_ATTR_RESERVED,
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.Printer_Interface =
{
.Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
.InterfaceNumber = 0,
.AlternateSetting = 0,
.TotalEndpoints = 2,
.Class = PRNT_CSCP_PrinterClass,
.SubClass = PRNT_CSCP_PrinterSubclass,
.Protocol = PRNT_CSCP_BidirectionalProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
.Printer_DataInEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = PRINTER_IN_EPADDR,
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = PRINTER_IO_EPSIZE,
.PollingIntervalMS = 0x05
},
.Printer_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
.EndpointAddress = PRINTER_OUT_EPADDR,
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = PRINTER_IO_EPSIZE,
.PollingIntervalMS = 0x05
}
};
/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
const USB_Descriptor_String_t LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
.UnicodeString = {LANGUAGE_ID_ENG}
};
/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
.UnicodeString = L"Dean Camera"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t ProductString =
{
.Header = {.Size = USB_STRING_LEN(23), .Type = DTYPE_String},
.UnicodeString = L"LUFA Printer Bootloader"
};
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
* documentation) by the application code so that the address and size of a requested descriptor can be given
* to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
{
const uint8_t DescriptorType = (wValue >> 8);
const uint8_t DescriptorNumber = (wValue & 0xFF);
const void* Address = NULL;
uint16_t Size = NO_DESCRIPTOR;
switch (DescriptorType)
{
case DTYPE_Device:
Address = &DeviceDescriptor;
Size = sizeof(USB_Descriptor_Device_t);
break;
case DTYPE_Configuration:
Address = &ConfigurationDescriptor;
Size = sizeof(USB_Descriptor_Configuration_t);
break;
case DTYPE_String:
switch (DescriptorNumber)
{
case 0x00:
Address = &LanguageString;
Size = pgm_read_byte(&LanguageString.Header.Size);
break;
case 0x01:
Address = &ManufacturerString;
Size = pgm_read_byte(&ManufacturerString.Header.Size);
break;
case 0x02:
Address = &ProductString;
Size = pgm_read_byte(&ProductString.Header.Size);
break;
}
break;
}
*DescriptorAddress = Address;
return Size;
}

77
Bootloaders/Printer/Descriptors.h
Unescape View File

@ -0,0 +1,77 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for Descriptors.c.
*/
#ifndef _DESCRIPTORS_H_
#define _DESCRIPTORS_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h>
#include <avr/pgmspace.h>
/* Macros: */
/** Endpoint address of the Printer device-to-host data IN endpoint. */
#define PRINTER_IN_EPADDR (ENDPOINT_DIR_IN | 3)
/** Endpoint address of the Printer host-to-device data OUT endpoint. */
#define PRINTER_OUT_EPADDR (ENDPOINT_DIR_OUT | 4)
/** Size in bytes of the Printer data endpoints. */
#define PRINTER_IO_EPSIZE 64
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
* vary between devices, and which describe the device's usage to the host.
*/
typedef struct
{
USB_Descriptor_Configuration_Header_t Config;
// Printer Interface
USB_Descriptor_Interface_t Printer_Interface;
USB_Descriptor_Endpoint_t Printer_DataInEndpoint;
USB_Descriptor_Endpoint_t Printer_DataOutEndpoint;
} USB_Descriptor_Configuration_t;
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress)
ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif

48
Bootloaders/Printer/makefile
Unescape View File

@ -0,0 +1,48 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2013.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = BootloaderPrinter
SRC = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
LUFA_PATH = ../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
# Flash size and bootloader section sizes of the target, in KB. These must
# match the target's total FLASH size and the bootloader size set in the
# device's fuses.
FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 8
# Bootloader address calculation formulas
# Do not modify these macros, but rather modify the dependent values above.
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - $(strip $(1)) )
# Default target
all:
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk

4
LUFA/DoxygenPages/ChangeLog.txt
Unescape View File

@ -7,7 +7,9 @@
/** \page Page_ChangeLog Project Changelog /** \page Page_ChangeLog Project Changelog
* *
* \section Sec_ChangeLogXXXXXX Version XXXXXX * \section Sec_ChangeLogXXXXXX Version XXXXXX
* No changes. * <b>New:</b>
* - Library Applications:
* - Added new Printer class bootloader
* *
* \section Sec_ChangeLog130303 Version 130303 * \section Sec_ChangeLog130303 Version 130303
* <b>New:</b> * <b>New:</b>

Write Preview
Loading…
Cancel
Save