Revert ps2_usb/Makefile and config.h

pull/12/head
tmk 10 years ago
parent b316f19871
commit 8b9c61ade5

@ -91,19 +91,6 @@ PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomen
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin #PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT = yes # uses primitive reference code #PS2_USE_BUSYWAIT = yes # uses primitive reference code
# Serial Mouse Options
# You can choose a mouse protocol and the implementation of
# the underlying serial connection.
#
#SERIAL_MOUSE_MICROSOFT_ENABLE = yes # Enable support for Microsoft-compatible mice
#SERIAL_MOUSE_MOUSESYSTEMS_ENABLE = yes # Enable support for Mousesystems-compatible mice
#SERIAL_MOUSE_USE_UART = yes # use hardware UART for serial connection
#SERIAL_MOUSE_USE_SOFT = yes # use software serial implementation
# Optional serial mouse driver features
# Support scrolling while holding the middle mouse button
# (currently only supported for Mousesystems mice):
#OPT_DEFS += -DSERIAL_MOUSE_CENTER_SCROLL
# Optimize size but this may cause error "relocation truncated to fit" # Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax #EXTRALDFLAGS = -Wl,--relax

@ -69,7 +69,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PS2_DATA_PORT PORTD #define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND #define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD #define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 0 #define PS2_DATA_BIT 2
#define PS2_INT_INIT() do { \ #define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \ EICRA |= ((1<<ISC11) | \
(0<<ISC10)); \ (0<<ISC10)); \
@ -170,42 +170,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif #endif
#endif #endif
#ifdef SERIAL_MOUSE_MICROSOFT
/*
* Serial(USART) configuration (for Microsoft serial mice)
* asynchronous, positive logic, 1200baud, bit order: LSB first
* 1-start bit, 7-data bit, no parity, 1-stop bit
*/
#define SERIAL_UART_BAUD 1200
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
#define SERIAL_UART_RXD_VECT USART1_RX_vect
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
#define SERIAL_UART_INIT() do { \
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \
sei(); \
} while(0)
#elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
/*
* Serial(USART) configuration (for Mousesystems serial mice)
* asynchronous, positive logic, 1200baud, bit order: LSB first
* 1-start bit, 8-data bit, no parity, 1-stop bit
*/
#define SERIAL_UART_BAUD 1200
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
#define SERIAL_UART_RXD_VECT USART1_RX_vect
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
#define SERIAL_UART_INIT() do { \
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \
sei(); \
} while(0)
#endif
#endif #endif

Loading…
Cancel
Save