Backlight and RGB now working for JJ50 (#2929)
* Added support for JJ50 from KPRepublic, no rgb or backlight control yet. Added as a layout of ymd96 at the moment (same microprocessor). Basic keymap with three layers to get started. * Added support for JJ50 * Tidied up jj50 code, backlight and RGB is now working. * Renaming "KEYMAP" to "LAYOUT" to adhere to the new QMK standards.pull/2935/head
WarmCat
7 years ago
committed by
Drashna Jaelre
parent
c5264d6d89
commit
933842067d
@ -0,0 +1,212 @@
|
|||||||
|
/**
|
||||||
|
* Backlighting code for PS2AVRGB boards (ATMEGA32A)
|
||||||
|
* Kenneth A. (github.com/krusli | krusli.me)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "backlight.h"
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
|
||||||
|
#include "backlight_custom.h"
|
||||||
|
#include "breathing_custom.h"
|
||||||
|
|
||||||
|
// DEBUG
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <stdio.h>
|
||||||
|
|
||||||
|
// Port D: digital pins of the AVR chipset
|
||||||
|
#define NUMLOCK_PORT (1 << 1) // 1st pin of Port D (digital)
|
||||||
|
#define CAPSLOCK_PORT (1 << 2) // 2nd pin
|
||||||
|
#define BACKLIGHT_PORT (1 << 4) // 4th pin
|
||||||
|
#define SCROLLLOCK_PORT (1 << 6) // 6th pin
|
||||||
|
|
||||||
|
#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64
|
||||||
|
#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default
|
||||||
|
|
||||||
|
#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask
|
||||||
|
|
||||||
|
#define PWM_MAX 0xFF
|
||||||
|
#define TIMER_TOP 255 // 8 bit PWM
|
||||||
|
|
||||||
|
extern backlight_config_t backlight_config;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* References
|
||||||
|
* Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
|
||||||
|
* TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
|
||||||
|
* Timers: http://www.avrbeginners.net/architecture/timers/timers.html
|
||||||
|
* 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
|
||||||
|
* PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
|
||||||
|
*/
|
||||||
|
|
||||||
|
// @Override
|
||||||
|
// turn LEDs on and off depending on USB caps/num/scroll lock states.
|
||||||
|
void led_set_user(uint8_t usb_led) {
|
||||||
|
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||||
|
// turn on
|
||||||
|
DDRD |= NUMLOCK_PORT;
|
||||||
|
PORTD |= NUMLOCK_PORT;
|
||||||
|
} else {
|
||||||
|
// turn off
|
||||||
|
DDRD &= ~NUMLOCK_PORT;
|
||||||
|
PORTD &= ~NUMLOCK_PORT;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||||
|
DDRD |= CAPSLOCK_PORT;
|
||||||
|
PORTD |= CAPSLOCK_PORT;
|
||||||
|
} else {
|
||||||
|
DDRD &= ~CAPSLOCK_PORT;
|
||||||
|
PORTD &= ~CAPSLOCK_PORT;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||||
|
DDRD |= SCROLLLOCK_PORT;
|
||||||
|
PORTD |= SCROLLLOCK_PORT;
|
||||||
|
} else {
|
||||||
|
DDRD &= ~SCROLLLOCK_PORT;
|
||||||
|
PORTD &= ~SCROLLLOCK_PORT;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef BACKLIGHT_ENABLE
|
||||||
|
|
||||||
|
// sets up Timer 1 for 8-bit PWM
|
||||||
|
void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
|
||||||
|
// default 8 bit mode
|
||||||
|
TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
|
||||||
|
TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
|
||||||
|
|
||||||
|
// clear output compare value A
|
||||||
|
// outb(OCR1AH, 0);
|
||||||
|
// outb(OCR1AL, 0);
|
||||||
|
|
||||||
|
// clear output comparator registers for B
|
||||||
|
OCR1BH = 0; // outb(OCR1BH, 0);
|
||||||
|
OCR1BL = 0; // outb(OCR1BL, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
bool is_init = false;
|
||||||
|
void timer1Init(void) {
|
||||||
|
// timer1SetPrescaler(TIMER1PRESCALE)
|
||||||
|
// set to DIV/64
|
||||||
|
(TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
|
||||||
|
|
||||||
|
// reset TCNT1
|
||||||
|
TCNT1H = 0; // outb(TCNT1H, 0);
|
||||||
|
TCNT1L = 0; // outb(TCNT1L, 0);
|
||||||
|
|
||||||
|
// TOIE1: Timer Overflow Interrupt Enable (Timer 1);
|
||||||
|
TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
|
||||||
|
|
||||||
|
is_init = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
void timer1UnInit(void) {
|
||||||
|
// set prescaler back to NONE
|
||||||
|
(TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP
|
||||||
|
|
||||||
|
// disable timer overflow interrupt
|
||||||
|
TIMSK &= ~_BV(TOIE1); // overflow bit?
|
||||||
|
|
||||||
|
setPWM(0);
|
||||||
|
|
||||||
|
is_init = false;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// handle TCNT1 overflow
|
||||||
|
//! Interrupt handler for tcnt1 overflow interrupt
|
||||||
|
ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
|
||||||
|
{
|
||||||
|
// sei();
|
||||||
|
// handle breathing here
|
||||||
|
#ifdef BACKLIGHT_BREATHING
|
||||||
|
if (is_breathing()) {
|
||||||
|
custom_breathing_handler();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// TODO call user defined function
|
||||||
|
}
|
||||||
|
|
||||||
|
// enable timer 1 PWM
|
||||||
|
// timer1PWMBOn()
|
||||||
|
void timer1PWMBEnable(void) {
|
||||||
|
// turn on channel B (OC1B) PWM output
|
||||||
|
// set OC1B as non-inverted PWM
|
||||||
|
TCCR1A |= _BV(COM1B1);
|
||||||
|
TCCR1A &= ~_BV(COM1B0);
|
||||||
|
}
|
||||||
|
|
||||||
|
// disable timer 1 PWM
|
||||||
|
// timer1PWMBOff()
|
||||||
|
void timer1PWMBDisable(void) {
|
||||||
|
TCCR1A &= ~_BV(COM1B1);
|
||||||
|
TCCR1A &= ~_BV(COM1B0);
|
||||||
|
}
|
||||||
|
|
||||||
|
void enableBacklight(void) {
|
||||||
|
DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
|
||||||
|
PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
|
||||||
|
}
|
||||||
|
|
||||||
|
void disableBacklight(void) {
|
||||||
|
// DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
|
||||||
|
PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
|
||||||
|
}
|
||||||
|
|
||||||
|
void startPWM(void) {
|
||||||
|
timer1Init();
|
||||||
|
timer1PWMBEnable();
|
||||||
|
enableBacklight();
|
||||||
|
}
|
||||||
|
|
||||||
|
void stopPWM(void) {
|
||||||
|
timer1UnInit();
|
||||||
|
disableBacklight();
|
||||||
|
timer1PWMBDisable();
|
||||||
|
}
|
||||||
|
|
||||||
|
void b_led_init_ports(void) {
|
||||||
|
/* turn backlight on/off depending on user preference */
|
||||||
|
#if BACKLIGHT_ON_STATE == 0
|
||||||
|
// DDRx register: sets the direction of Port D
|
||||||
|
// DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
|
||||||
|
PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
|
||||||
|
#else
|
||||||
|
DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
|
||||||
|
PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
|
||||||
|
#endif
|
||||||
|
|
||||||
|
timer1PWMSetup();
|
||||||
|
startPWM();
|
||||||
|
|
||||||
|
#ifdef BACKLIGHT_BREATHING
|
||||||
|
breathing_enable();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
void b_led_set(uint8_t level) {
|
||||||
|
if (level > BACKLIGHT_LEVELS) {
|
||||||
|
level = BACKLIGHT_LEVELS;
|
||||||
|
}
|
||||||
|
|
||||||
|
setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
|
||||||
|
}
|
||||||
|
|
||||||
|
// called every matrix scan
|
||||||
|
void b_led_task(void) {
|
||||||
|
// do nothing for now
|
||||||
|
}
|
||||||
|
|
||||||
|
void setPWM(uint16_t xValue) {
|
||||||
|
if (xValue > TIMER_TOP) {
|
||||||
|
xValue = TIMER_TOP;
|
||||||
|
}
|
||||||
|
OCR1B = xValue; // timer1PWMBSet(xValue);
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // BACKLIGHT_ENABLE
|
||||||
@ -0,0 +1,15 @@
|
|||||||
|
/**
|
||||||
|
* Backlighting code for PS2AVRGB boards (ATMEGA32A)
|
||||||
|
* Kenneth A. (github.com/krusli | krusli.me)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BACKLIGHT_CUSTOM_H
|
||||||
|
#define BACKLIGHT_CUSTOM_H
|
||||||
|
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
void b_led_init_ports(void);
|
||||||
|
void b_led_set(uint8_t level);
|
||||||
|
void b_led_task(void);
|
||||||
|
void setPWM(uint16_t xValue);
|
||||||
|
|
||||||
|
#endif // BACKLIGHT_CUSTOM_H
|
||||||
@ -0,0 +1,140 @@
|
|||||||
|
/**
|
||||||
|
* Breathing effect code for PS2AVRGB boards (ATMEGA32A)
|
||||||
|
* Works in conjunction with `backlight.c`.
|
||||||
|
*
|
||||||
|
* Code adapted from `quantum.c` to register with the existing TIMER1 overflow
|
||||||
|
* handler in `backlight.c` instead of setting up its own timer.
|
||||||
|
* Kenneth A. (github.com/krusli | krusli.me)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef BACKLIGHT_ENABLE
|
||||||
|
#ifdef BACKLIGHT_BREATHING
|
||||||
|
|
||||||
|
#include "backlight_custom.h"
|
||||||
|
|
||||||
|
#ifndef BREATHING_PERIOD
|
||||||
|
#define BREATHING_PERIOD 6
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define breathing_min() do {breathing_counter = 0;} while (0)
|
||||||
|
#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
|
||||||
|
|
||||||
|
// TODO make this share code with quantum.c
|
||||||
|
|
||||||
|
#define BREATHING_NO_HALT 0
|
||||||
|
#define BREATHING_HALT_OFF 1
|
||||||
|
#define BREATHING_HALT_ON 2
|
||||||
|
#define BREATHING_STEPS 128
|
||||||
|
|
||||||
|
static uint8_t breathing_period = BREATHING_PERIOD;
|
||||||
|
static uint8_t breathing_halt = BREATHING_NO_HALT;
|
||||||
|
static uint16_t breathing_counter = 0;
|
||||||
|
|
||||||
|
static bool breathing = false;
|
||||||
|
|
||||||
|
bool is_breathing(void) {
|
||||||
|
return breathing;
|
||||||
|
}
|
||||||
|
|
||||||
|
// See http://jared.geek.nz/2013/feb/linear-led-pwm
|
||||||
|
static uint16_t cie_lightness(uint16_t v) {
|
||||||
|
if (v <= 5243) // if below 8% of max
|
||||||
|
return v / 9; // same as dividing by 900%
|
||||||
|
else {
|
||||||
|
uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
|
||||||
|
// to get a useful result with integer division, we shift left in the expression above
|
||||||
|
// and revert what we've done again after squaring.
|
||||||
|
y = y * y * y >> 8;
|
||||||
|
if (y > 0xFFFFUL) // prevent overflow
|
||||||
|
return 0xFFFFU;
|
||||||
|
else
|
||||||
|
return (uint16_t) y;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_enable(void) {
|
||||||
|
breathing = true;
|
||||||
|
breathing_counter = 0;
|
||||||
|
breathing_halt = BREATHING_NO_HALT;
|
||||||
|
// interrupt already registered
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_pulse(void) {
|
||||||
|
if (get_backlight_level() == 0)
|
||||||
|
breathing_min();
|
||||||
|
else
|
||||||
|
breathing_max();
|
||||||
|
breathing_halt = BREATHING_HALT_ON;
|
||||||
|
// breathing_interrupt_enable();
|
||||||
|
breathing = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_disable(void) {
|
||||||
|
breathing = false;
|
||||||
|
// backlight_set(get_backlight_level());
|
||||||
|
b_led_set(get_backlight_level()); // custom implementation of backlight_set()
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_self_disable(void)
|
||||||
|
{
|
||||||
|
if (get_backlight_level() == 0)
|
||||||
|
breathing_halt = BREATHING_HALT_OFF;
|
||||||
|
else
|
||||||
|
breathing_halt = BREATHING_HALT_ON;
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_toggle(void) {
|
||||||
|
if (is_breathing())
|
||||||
|
breathing_disable();
|
||||||
|
else
|
||||||
|
breathing_enable();
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_period_set(uint8_t value)
|
||||||
|
{
|
||||||
|
if (!value)
|
||||||
|
value = 1;
|
||||||
|
breathing_period = value;
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_period_default(void) {
|
||||||
|
breathing_period_set(BREATHING_PERIOD);
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_period_inc(void)
|
||||||
|
{
|
||||||
|
breathing_period_set(breathing_period+1);
|
||||||
|
}
|
||||||
|
|
||||||
|
void breathing_period_dec(void)
|
||||||
|
{
|
||||||
|
breathing_period_set(breathing_period-1);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* To generate breathing curve in python:
|
||||||
|
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
|
||||||
|
*/
|
||||||
|
static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
|
||||||
|
// Use this before the cie_lightness function.
|
||||||
|
static inline uint16_t scale_backlight(uint16_t v) {
|
||||||
|
return v / BACKLIGHT_LEVELS * get_backlight_level();
|
||||||
|
}
|
||||||
|
|
||||||
|
void custom_breathing_handler(void) {
|
||||||
|
uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
|
||||||
|
// resetting after one period to prevent ugly reset at overflow.
|
||||||
|
breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
|
||||||
|
uint8_t index = breathing_counter / interval % BREATHING_STEPS;
|
||||||
|
|
||||||
|
if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
|
||||||
|
((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
|
||||||
|
{
|
||||||
|
// breathing_interrupt_disable();
|
||||||
|
}
|
||||||
|
|
||||||
|
setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // BACKLIGHT_BREATHING
|
||||||
|
#endif // BACKLIGHT_ENABLE
|
||||||
Loading…
Reference in new issue