Improved dynamic keymaps (#3972)

* Improved dynamic keymaps

* K&R sucks

keyboards/zeal60/zeal60.c

@@ -81,9 +81,9 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
 			dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
 			break;
 		}
-		case id_dynamic_keymap_clear_all:
+		case id_dynamic_keymap_reset:
 		{
-			dynamic_keymap_clear_all();
+			dynamic_keymap_reset();
 			break;
 		}
 #endif // DYNAMIC_KEYMAP_ENABLE
@@ -171,9 +171,8 @@ void matrix_init_kb(void)
 #endif // RGB_BACKLIGHT_ENABLED
 
 #ifdef DYNAMIC_KEYMAP_ENABLE
-		// This saves "empty" keymaps so it falls back to the keymaps
-		// in the firmware (aka. progmem/flash)
-		dynamic_keymap_clear_all();
+		// This resets the keymaps in EEPROM to what is in flash.
+		dynamic_keymap_reset();
 #endif
 
 		// Save the magic number last, in case saving was interrupted

keyboards/zeal60/zeal60_api.h

@@ -24,7 +24,7 @@ enum zeal60_command_id
 	id_set_keyboard_value,
 	id_dynamic_keymap_get_keycode,
 	id_dynamic_keymap_set_keycode,
-	id_dynamic_keymap_clear_all,
+	id_dynamic_keymap_reset,
 	id_backlight_config_set_value,
 	id_backlight_config_get_value,
 	id_backlight_config_save,

quantum/dynamic_keymap.c

@@ -16,6 +16,8 @@
 
 #include "config.h"
 #include "keymap.h" // to get keymaps[][][]
+#include "tmk_core/common/eeprom.h"
+#include "progmem.h"// to read default from flash
 
 #include "dynamic_keymap.h"
 
@@ -29,8 +31,6 @@
 #error DYNAMIC_KEYMAP_LAYER_COUNT not defined
 #endif
 
-#define KC_EENULL 0xFFFF // TODO: move to enum quantum_keycodes
-
 void *dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column)
 {
 	// TODO: optimize this with some left shifts
@@ -55,16 +55,15 @@ void dynamic_keymap_set_keycode(uint8_t layer, uint8_t row, uint8_t column, uint
 	eeprom_update_byte(address+1, (uint8_t)(keycode & 0xFF));
 }
 
-void dynamic_keymap_clear_all(void)
-{
-	// Save "empty" keymaps.
-	for ( int layer = 0; layer < DYNAMIC_KEYMAP_LAYER_COUNT; layer++ )
-	{
-		for ( int row = 0; row < MATRIX_ROWS; row++ )
+void dynamic_keymap_reset(void)
 {
-			for ( int column = 0; column < MATRIX_COLS; column++ )
-			{
-				dynamic_keymap_set_keycode(layer, row, column, KC_EENULL);
+	// Reset the keymaps in EEPROM to what is in flash.
+	// All keyboards using dynamic keymaps should define a layout
+	// for the same number of layers as DYNAMIC_KEYMAP_LAYER_COUNT.
+	for ( int layer = 0; layer < DYNAMIC_KEYMAP_LAYER_COUNT; layer++ )	{
+		for ( int row = 0; row < MATRIX_ROWS; row++ ) {
+			for ( int column = 0; column < MATRIX_COLS; column++ )	{
+				dynamic_keymap_set_keycode(layer, row, column, pgm_read_word(&keymaps[layer][row][column]));
 			}
 		}
 	}
@@ -73,25 +72,14 @@ void dynamic_keymap_clear_all(void)
 // This overrides the one in quantum/keymap_common.c
 uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
 {
-	// This used to test EEPROM for magic bytes, but it was redundant.
-	// Test for EEPROM usage change (fresh install, address change, etc.)
-	// externally and call dynamic_keymap_default_save()
 	if ( layer < DYNAMIC_KEYMAP_LAYER_COUNT &&
-		 key.row < MATRIX_ROWS && // possibly redundant
-		 key.col < MATRIX_COLS ) // possibly redundant
-	{
-		uint16_t keycode = dynamic_keymap_get_keycode(layer, key.row, key.col);
-
-		// If keycode is not "empty", return it, otherwise
-		// drop down to return the one in flash
-		if ( keycode != KC_EENULL)
-		{
-			return keycode;
+			key.row < MATRIX_ROWS &&
+			key.col < MATRIX_COLS ) {
+		return dynamic_keymap_get_keycode(layer, key.row, key.col);
+	} else {
+		return KC_NO;
 	}
 }
 
-	return pgm_read_word(&keymaps[layer][key.row][key.col]);
-}
-
 #endif // DYNAMIC_KEYMAP_ENABLE
 

quantum/dynamic_keymap.h

@@ -13,9 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-
-#ifndef DYNAMIC_KEYMAP_H
-#define DYNAMIC_KEYMAP_H
+#pragma once
 
 #include <stdint.h>
 #include <stdbool.h>
@@ -23,9 +21,8 @@
 void *dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column);
 uint16_t dynamic_keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t column);
 void dynamic_keymap_set_keycode(uint8_t layer, uint8_t row, uint8_t column, uint16_t keycode);
-void dynamic_keymap_clear_all(void);
+void dynamic_keymap_reset(void);
 
 // This overrides the one in quantum/keymap_common.c
 // uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
 
-#endif //DYNAMIC_KEYMAP_H