forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Normalize line endings

Browse Source
pull/691/head
Fred Sundvik 8 years ago
parent de58ec9738
commit a5b1af4999
39 changed files with 6322 additions and 6322 deletions
Show Stats Download Patch File Download Diff File

98
keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
Unescape View File

@ -1,49 +1,49 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
#include "hal.h" #include "hal.h"
/** /**
* @brief PAL setup. * @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h. * @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver. * This variable is used by the HAL when initializing the PAL driver.
*/ */
#if HAL_USE_PAL || defined(__DOXYGEN__) #if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config = const PALConfig pal_default_config =
{ {
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
}; };
#endif #endif
/* /*
* Early initialization code. * Early initialization code.
* This initialization must be performed just after stack setup and before * This initialization must be performed just after stack setup and before
* any other initialization. * any other initialization.
*/ */
void __early_init(void) { void __early_init(void) {
stm32_clock_init(); stm32_clock_init();
} }
/* /*
* Board-specific initialization code. * Board-specific initialization code.
*/ */
void boardInit(void) { void boardInit(void) {
} }

332
keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
Unescape View File

@ -1,166 +1,166 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
#ifndef _BOARD_H_ #ifndef _BOARD_H_
#define _BOARD_H_ #define _BOARD_H_
/* /*
* Setup for a Generic STM32F103 board. * Setup for a Generic STM32F103 board.
*/ */
/* /*
* Board identifier. * Board identifier.
*/ */
#define BOARD_GENERIC_STM32_F103 #define BOARD_GENERIC_STM32_F103
#define BOARD_NAME "Generic STM32F103x board" #define BOARD_NAME "Generic STM32F103x board"
/* /*
* Board frequencies. * Board frequencies.
*/ */
#define STM32_LSECLK 32768 #define STM32_LSECLK 32768
#define STM32_HSECLK 8000000 #define STM32_HSECLK 8000000
/* /*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
*/ */
#define STM32F103xB #define STM32F103xB
/* /*
* IO pins assignments * IO pins assignments
*/ */
/* on-board */ /* on-board */
#define GPIOC_LED 13 #define GPIOC_LED 13
#define GPIOD_OSC_IN 0 #define GPIOD_OSC_IN 0
#define GPIOD_OSC_OUT 1 #define GPIOD_OSC_OUT 1
/* In case your board has a "USB enable" hardware /* In case your board has a "USB enable" hardware
controlled by a pin, define it here. (It could be just controlled by a pin, define it here. (It could be just
a 1.5k resistor connected to D+ line.) a 1.5k resistor connected to D+ line.)
*/ */
/* /*
#define GPIOB_USB_DISC 10 #define GPIOB_USB_DISC 10
*/ */
/* /*
* I/O ports initial setup, this configuration is established soon after reset * I/O ports initial setup, this configuration is established soon after reset
* in the initialization code. * in the initialization code.
* *
* The digits have the following meaning: * The digits have the following meaning:
* 0 - Analog input. * 0 - Analog input.
* 1 - Push Pull output 10MHz. * 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz. * 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz. * 3 - Push Pull output 50MHz.
* 4 - Digital input. * 4 - Digital input.
* 5 - Open Drain output 10MHz. * 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz. * 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz. * 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR. * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz. * 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz. * A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz. * B - Alternate Push Pull output 50MHz.
* C - Reserved. * C - Reserved.
* D - Alternate Open Drain output 10MHz. * D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz. * E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz. * F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details. * Please refer to the STM32 Reference Manual for details.
*/ */
/* /*
* Port A setup. * Port A setup.
* Everything input with pull-up except: * Everything input with pull-up except:
* PA2 - Alternate output (USART2 TX). * PA2 - Alternate output (USART2 TX).
* PA3 - Normal input (USART2 RX). * PA3 - Normal input (USART2 RX).
* PA9 - Alternate output (USART1 TX). * PA9 - Alternate output (USART1 TX).
* PA10 - Normal input (USART1 RX). * PA10 - Normal input (USART1 RX).
*/ */
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ #define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ #define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF #define VAL_GPIOAODR 0xFFFFFFFF
/* /*
* Port B setup. * Port B setup.
* Everything input with pull-up except: * Everything input with pull-up except:
* PB10 - Push Pull output (USB switch). * PB10 - Push Pull output (USB switch).
*/ */
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ #define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ #define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF #define VAL_GPIOBODR 0xFFFFFFFF
/* /*
* Port C setup. * Port C setup.
* Everything input with pull-up except: * Everything input with pull-up except:
* PC13 - Push Pull output (LED). * PC13 - Push Pull output (LED).
*/ */
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ #define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ #define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF #define VAL_GPIOCODR 0xFFFFFFFF
/* /*
* Port D setup. * Port D setup.
* Everything input with pull-up except: * Everything input with pull-up except:
* PD0 - Normal input (XTAL). * PD0 - Normal input (XTAL).
* PD1 - Normal input (XTAL). * PD1 - Normal input (XTAL).
*/ */
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ #define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ #define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF #define VAL_GPIODODR 0xFFFFFFFF
/* /*
* Port E setup. * Port E setup.
* Everything input with pull-up except: * Everything input with pull-up except:
*/ */
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ #define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ #define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF #define VAL_GPIOEODR 0xFFFFFFFF
/* /*
* USB bus activation macro, required by the USB driver. * USB bus activation macro, required by the USB driver.
*/ */
/* The point is that most of the generic STM32F103* boards /* The point is that most of the generic STM32F103* boards
have a 1.5k resistor connected on one end to the D+ line have a 1.5k resistor connected on one end to the D+ line
and on the other end to some pin. Or even a slightly more and on the other end to some pin. Or even a slightly more
complicated "USB enable" circuit, controlled by a pin. complicated "USB enable" circuit, controlled by a pin.
That should go here. That should go here.
However on some boards (e.g. one that I have), there's no However on some boards (e.g. one that I have), there's no
such hardware. In which case it's better to not do anything. such hardware. In which case it's better to not do anything.
*/ */
/* /*
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) #define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
*/ */
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
/* /*
* USB bus de-activation macro, required by the USB driver. * USB bus de-activation macro, required by the USB driver.
*/ */
/* /*
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) #define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
*/ */
#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
#if !defined(_FROM_ASM_) #if !defined(_FROM_ASM_)
#ifdef __cplusplus #ifdef __cplusplus
extern "C" { extern "C" {
#endif #endif
void boardInit(void); void boardInit(void);
#ifdef __cplusplus #ifdef __cplusplus
} }
#endif #endif
#endif /* _FROM_ASM_ */ #endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */ #endif /* _BOARD_H_ */

10
keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
Unescape View File

@ -1,5 +1,5 @@
# List of all the board related files. # List of all the board related files.
BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
# Required include directories # Required include directories
BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103 BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103

210
keyboards/chibios_test/ld/MKL26Z64.ld
Unescape View File

@ -1,105 +1,105 @@
/* /*
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
* (C) 2016 flabbergast <s3+flabbergast@sdfeu.org> * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
* *
* Permission is hereby granted, free of charge, to any person obtaining * Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the "Software"), * a copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation * to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense, * the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the * and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions: * Software is furnished to do so, subject to the following conditions:
* *
* The above copyright notice and this permission notice shall be included in * The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software. * all copies or substantial portions of the Software.
* *
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE. * SOFTWARE.
*/ */
/* /*
* KL26Z64 memory setup. * KL26Z64 memory setup.
*/ */
MEMORY MEMORY
{ {
flash0 : org = 0x00000000, len = 0x100 flash0 : org = 0x00000000, len = 0x100
flash1 : org = 0x00000400, len = 0x10 flash1 : org = 0x00000400, len = 0x10
flash2 : org = 0x00000410, len = 62k - 0x410 flash2 : org = 0x00000410, len = 62k - 0x410
flash3 : org = 0x0000F800, len = 2k flash3 : org = 0x0000F800, len = 2k
flash4 : org = 0x00000000, len = 0 flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0 flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0 flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0 flash7 : org = 0x00000000, len = 0
ram0 : org = 0x1FFFF800, len = 8k ram0 : org = 0x1FFFF800, len = 8k
ram1 : org = 0x00000000, len = 0 ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0 ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0 ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0 ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0 ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0 ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0 ram7 : org = 0x00000000, len = 0
} }
/* Flash region for the configuration bytes.*/ /* Flash region for the configuration bytes.*/
SECTIONS SECTIONS
{ {
.cfmprotect : ALIGN(4) SUBALIGN(4) .cfmprotect : ALIGN(4) SUBALIGN(4)
{ {
KEEP(*(.cfmconfig)) KEEP(*(.cfmconfig))
} > flash1 } > flash1
} }
/* For each data/text section two region are defined, a virtual region /* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/ and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/ /* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0); REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0); REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/ /* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash2); REGION_ALIAS("XTORS_FLASH", flash2);
REGION_ALIAS("XTORS_FLASH_LMA", flash2); REGION_ALIAS("XTORS_FLASH_LMA", flash2);
/* Flash region to be used for code text.*/ /* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash2); REGION_ALIAS("TEXT_FLASH", flash2);
REGION_ALIAS("TEXT_FLASH_LMA", flash2); REGION_ALIAS("TEXT_FLASH_LMA", flash2);
/* Flash region to be used for read only data.*/ /* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash2); REGION_ALIAS("RODATA_FLASH", flash2);
REGION_ALIAS("RODATA_FLASH_LMA", flash2); REGION_ALIAS("RODATA_FLASH_LMA", flash2);
/* Flash region to be used for various.*/ /* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash2); REGION_ALIAS("VARIOUS_FLASH", flash2);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
/* Flash region to be used for RAM(n) initialization data.*/ /* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
/* RAM region to be used for Main stack. This stack accommodates the processing /* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/ of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0); REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by /* RAM region to be used for the process stack. This is the stack used by
the main() function.*/ the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0); REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/ /* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0); REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash2); REGION_ALIAS("DATA_RAM_LMA", flash2);
/* RAM region to be used for BSS segment.*/ /* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0); REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/ /* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0); REGION_ALIAS("HEAP_RAM", ram0);
__eeprom_workarea_start__ = ORIGIN(flash3); __eeprom_workarea_start__ = ORIGIN(flash3);
__eeprom_workarea_size__ = LENGTH(flash3); __eeprom_workarea_size__ = LENGTH(flash3);
__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; __eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
/* Generic rules inclusion.*/ /* Generic rules inclusion.*/
INCLUDE rules.ld INCLUDE rules.ld

176
keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
Unescape View File

@ -1,88 +1,88 @@
/* /*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
/* /*
* ST32F103xB memory setup for use with the maplemini bootloader. * ST32F103xB memory setup for use with the maplemini bootloader.
* You will have to * You will have to
* #define CORTEX_VTOR_INIT 0x5000 * #define CORTEX_VTOR_INIT 0x5000
* in your projects chconf.h * in your projects chconf.h
*/ */
MEMORY MEMORY
{ {
flash0 : org = 0x08002000, len = 128k - 0x2000 flash0 : org = 0x08002000, len = 128k - 0x2000
flash1 : org = 0x00000000, len = 0 flash1 : org = 0x00000000, len = 0
flash2 : org = 0x00000000, len = 0 flash2 : org = 0x00000000, len = 0
flash3 : org = 0x00000000, len = 0 flash3 : org = 0x00000000, len = 0
flash4 : org = 0x00000000, len = 0 flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0 flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0 flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0 flash7 : org = 0x00000000, len = 0
ram0 : org = 0x20000000, len = 20k ram0 : org = 0x20000000, len = 20k
ram1 : org = 0x00000000, len = 0 ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0 ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0 ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0 ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0 ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0 ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0 ram7 : org = 0x00000000, len = 0
} }
/* For each data/text section two region are defined, a virtual region /* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/ and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/ /* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0); REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0); REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/ /* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash0); REGION_ALIAS("XTORS_FLASH", flash0);
REGION_ALIAS("XTORS_FLASH_LMA", flash0); REGION_ALIAS("XTORS_FLASH_LMA", flash0);
/* Flash region to be used for code text.*/ /* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash0); REGION_ALIAS("TEXT_FLASH", flash0);
REGION_ALIAS("TEXT_FLASH_LMA", flash0); REGION_ALIAS("TEXT_FLASH_LMA", flash0);
/* Flash region to be used for read only data.*/ /* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash0); REGION_ALIAS("RODATA_FLASH", flash0);
REGION_ALIAS("RODATA_FLASH_LMA", flash0); REGION_ALIAS("RODATA_FLASH_LMA", flash0);
/* Flash region to be used for various.*/ /* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash0); REGION_ALIAS("VARIOUS_FLASH", flash0);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
/* Flash region to be used for RAM(n) initialization data.*/ /* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
/* RAM region to be used for Main stack. This stack accommodates the processing /* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/ of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0); REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by /* RAM region to be used for the process stack. This is the stack used by
the main() function.*/ the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0); REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/ /* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0); REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash0); REGION_ALIAS("DATA_RAM_LMA", flash0);
/* RAM region to be used for BSS segment.*/ /* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0); REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/ /* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0); REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/ /* Generic rules inclusion.*/
INCLUDE rules.ld INCLUDE rules.ld

342
keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
Unescape View File

@ -1,171 +1,171 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
#ifndef _MCUCONF_H_ #ifndef _MCUCONF_H_
#define _MCUCONF_H_ #define _MCUCONF_H_
/* /*
* STM32F0xx drivers configuration. * STM32F0xx drivers configuration.
* The following settings override the default settings present in * The following settings override the default settings present in
* the various device driver implementation headers. * the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole * Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h. * driver is enabled in halconf.h.
* *
* IRQ priorities: * IRQ priorities:
* 3...0 Lowest...Highest. * 3...0 Lowest...Highest.
* *
* DMA priorities: * DMA priorities:
* 0...3 Lowest...Highest. * 0...3 Lowest...Highest.
*/ */
#define STM32F0xx_MCUCONF #define STM32F0xx_MCUCONF
/* /*
* HAL driver system settings. * HAL driver system settings.
*/ */
#define STM32_NO_INIT FALSE #define STM32_NO_INIT FALSE
#define STM32_PVD_ENABLE FALSE #define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0 #define STM32_PLS STM32_PLS_LEV0
#define STM32_HSI_ENABLED TRUE #define STM32_HSI_ENABLED TRUE
#define STM32_HSI14_ENABLED TRUE #define STM32_HSI14_ENABLED TRUE
#define STM32_HSI48_ENABLED FALSE #define STM32_HSI48_ENABLED FALSE
#define STM32_LSI_ENABLED TRUE #define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED FALSE #define STM32_HSE_ENABLED FALSE
#define STM32_LSE_ENABLED FALSE #define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL #define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 #define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
#define STM32_PREDIV_VALUE 1 #define STM32_PREDIV_VALUE 1
#define STM32_PLLMUL_VALUE 12 #define STM32_PLLMUL_VALUE 12
#define STM32_HPRE STM32_HPRE_DIV1 #define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE STM32_PPRE_DIV1 #define STM32_PPRE STM32_PPRE_DIV1
#define STM32_ADCSW STM32_ADCSW_HSI14 #define STM32_ADCSW STM32_ADCSW_HSI14
#define STM32_ADCPRE STM32_ADCPRE_DIV4 #define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK #define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_ADCPRE STM32_ADCPRE_DIV4 #define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_ADCSW STM32_ADCSW_HSI14 #define STM32_ADCSW STM32_ADCSW_HSI14
#define STM32_USBSW STM32_USBSW_HSI48 #define STM32_USBSW STM32_USBSW_HSI48
#define STM32_CECSW STM32_CECSW_HSI #define STM32_CECSW STM32_CECSW_HSI
#define STM32_I2C1SW STM32_I2C1SW_HSI #define STM32_I2C1SW STM32_I2C1SW_HSI
#define STM32_USART1SW STM32_USART1SW_PCLK #define STM32_USART1SW STM32_USART1SW_PCLK
#define STM32_RTCSEL STM32_RTCSEL_LSI #define STM32_RTCSEL STM32_RTCSEL_LSI
/* /*
* ADC driver system settings. * ADC driver system settings.
*/ */
#define STM32_ADC_USE_ADC1 FALSE #define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2 #define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 2 #define STM32_ADC_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
/* /*
* EXT driver system settings. * EXT driver system settings.
*/ */
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 #define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 #define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 #define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 #define STM32_EXT_EXTI16_IRQ_PRIORITY 3
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 #define STM32_EXT_EXTI17_IRQ_PRIORITY 3
/* /*
* GPT driver system settings. * GPT driver system settings.
*/ */
#define STM32_GPT_USE_TIM1 FALSE #define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE #define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE #define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM14 FALSE #define STM32_GPT_USE_TIM14 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2 #define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2 #define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_TIM3_IRQ_PRIORITY 2 #define STM32_GPT_TIM3_IRQ_PRIORITY 2
#define STM32_GPT_TIM14_IRQ_PRIORITY 2 #define STM32_GPT_TIM14_IRQ_PRIORITY 2
/* /*
* I2C driver system settings. * I2C driver system settings.
*/ */
#define STM32_I2C_USE_I2C1 FALSE #define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE #define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50 #define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 3 #define STM32_I2C_I2C1_IRQ_PRIORITY 3
#define STM32_I2C_I2C2_IRQ_PRIORITY 3 #define STM32_I2C_I2C2_IRQ_PRIORITY 3
#define STM32_I2C_USE_DMA TRUE #define STM32_I2C_USE_DMA TRUE
#define STM32_I2C_I2C1_DMA_PRIORITY 1 #define STM32_I2C_I2C1_DMA_PRIORITY 1
#define STM32_I2C_I2C2_DMA_PRIORITY 1 #define STM32_I2C_I2C2_DMA_PRIORITY 1
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") #define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/* /*
* ICU driver system settings. * ICU driver system settings.
*/ */
#define STM32_ICU_USE_TIM1 FALSE #define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE #define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE #define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 3 #define STM32_ICU_TIM1_IRQ_PRIORITY 3
#define STM32_ICU_TIM2_IRQ_PRIORITY 3 #define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_TIM3_IRQ_PRIORITY 3 #define STM32_ICU_TIM3_IRQ_PRIORITY 3
/* /*
* PWM driver system settings. * PWM driver system settings.
*/ */
#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE #define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3 #define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3 #define STM32_PWM_TIM2_IRQ_PRIORITY 3
#define STM32_PWM_TIM3_IRQ_PRIORITY 3 #define STM32_PWM_TIM3_IRQ_PRIORITY 3
/* /*
* SERIAL driver system settings. * SERIAL driver system settings.
*/ */
#define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3 #define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3 #define STM32_SERIAL_USART2_PRIORITY 3
/* /*
* SPI driver system settings. * SPI driver system settings.
*/ */
#define STM32_SPI_USE_SPI1 FALSE #define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE #define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1 #define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1 #define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2 #define STM32_SPI_SPI1_IRQ_PRIORITY 2
#define STM32_SPI_SPI2_IRQ_PRIORITY 2 #define STM32_SPI_SPI2_IRQ_PRIORITY 2
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/* /*
* ST driver system settings. * ST driver system settings.
*/ */
#define STM32_ST_IRQ_PRIORITY 2 #define STM32_ST_IRQ_PRIORITY 2
#define STM32_ST_USE_TIMER 2 #define STM32_ST_USE_TIMER 2
/* /*
* UART driver system settings. * UART driver system settings.
*/ */
#define STM32_UART_USE_USART1 FALSE #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE #define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3 #define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3 #define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/* /*
* USB driver system settings. * USB driver system settings.
*/ */
#define STM32_USB_USE_USB1 TRUE #define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE #define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 #define STM32_USB_USB1_LP_IRQ_PRIORITY 3
#endif /* _MCUCONF_H_ */ #endif /* _MCUCONF_H_ */

418
keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
Unescape View File

@ -1,209 +1,209 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
#ifndef _MCUCONF_H_ #ifndef _MCUCONF_H_
#define _MCUCONF_H_ #define _MCUCONF_H_
#define STM32F103_MCUCONF #define STM32F103_MCUCONF
/* /*
* STM32F103 drivers configuration. * STM32F103 drivers configuration.
* The following settings override the default settings present in * The following settings override the default settings present in
* the various device driver implementation headers. * the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole * Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h. * driver is enabled in halconf.h.
* *
* IRQ priorities: * IRQ priorities:
* 15...0 Lowest...Highest. * 15...0 Lowest...Highest.
* *
* DMA priorities: * DMA priorities:
* 0...3 Lowest...Highest. * 0...3 Lowest...Highest.
*/ */
/* /*
* HAL driver system settings. * HAL driver system settings.
*/ */
#define STM32_NO_INIT FALSE #define STM32_NO_INIT FALSE
#define STM32_HSI_ENABLED TRUE #define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED FALSE #define STM32_LSI_ENABLED FALSE
#define STM32_HSE_ENABLED TRUE #define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE #define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL #define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE #define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 #define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9 #define STM32_PLLMUL_VALUE 9
#define STM32_HPRE STM32_HPRE_DIV1 #define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2 #define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2 #define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_ADCPRE STM32_ADCPRE_DIV4 #define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_USB_CLOCK_REQUIRED TRUE #define STM32_USB_CLOCK_REQUIRED TRUE
#define STM32_USBPRE STM32_USBPRE_DIV1P5 #define STM32_USBPRE STM32_USBPRE_DIV1P5
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK #define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV #define STM32_RTCSEL STM32_RTCSEL_HSEDIV
#define STM32_PVD_ENABLE FALSE #define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0 #define STM32_PLS STM32_PLS_LEV0
/* /*
* ADC driver system settings. * ADC driver system settings.
*/ */
#define STM32_ADC_USE_ADC1 FALSE #define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2 #define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC1_IRQ_PRIORITY 6 #define STM32_ADC_ADC1_IRQ_PRIORITY 6
/* /*
* CAN driver system settings. * CAN driver system settings.
*/ */
#define STM32_CAN_USE_CAN1 FALSE #define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11 #define STM32_CAN_CAN1_IRQ_PRIORITY 11
/* /*
* EXT driver system settings. * EXT driver system settings.
*/ */
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 #define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 #define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 #define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 #define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 #define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 #define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 #define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 #define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 #define STM32_EXT_EXTI17_IRQ_PRIORITY 6
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 #define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 #define STM32_EXT_EXTI19_IRQ_PRIORITY 6
/* /*
* GPT driver system settings. * GPT driver system settings.
*/ */
#define STM32_GPT_USE_TIM1 FALSE #define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE #define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE #define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE #define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM5 FALSE #define STM32_GPT_USE_TIM5 FALSE
#define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7 #define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7 #define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7 #define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7 #define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM5_IRQ_PRIORITY 7 #define STM32_GPT_TIM5_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7 #define STM32_GPT_TIM8_IRQ_PRIORITY 7
/* /*
* I2C driver system settings. * I2C driver system settings.
*/ */
#define STM32_I2C_USE_I2C1 FALSE #define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE #define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50 #define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 5 #define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5 #define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3 #define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3 #define STM32_I2C_I2C2_DMA_PRIORITY 3
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") #define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/* /*
* ICU driver system settings. * ICU driver system settings.
*/ */
#define STM32_ICU_USE_TIM1 FALSE #define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE #define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE #define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE #define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7 #define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7 #define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7 #define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7 #define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM5_IRQ_PRIORITY 7 #define STM32_ICU_TIM5_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7 #define STM32_ICU_TIM8_IRQ_PRIORITY 7
/* /*
* PWM driver system settings. * PWM driver system settings.
*/ */
#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE #define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE #define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7 #define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7 #define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7 #define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7 #define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM5_IRQ_PRIORITY 7 #define STM32_PWM_TIM5_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7 #define STM32_PWM_TIM8_IRQ_PRIORITY 7
/* /*
* RTC driver system settings. * RTC driver system settings.
*/ */
#define STM32_RTC_IRQ_PRIORITY 15 #define STM32_RTC_IRQ_PRIORITY 15
/* /*
* SERIAL driver system settings. * SERIAL driver system settings.
*/ */
#define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE #define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12 #define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12 #define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12 #define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12 #define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12 #define STM32_SERIAL_UART5_PRIORITY 12
/* /*
* SPI driver system settings. * SPI driver system settings.
*/ */
#define STM32_SPI_USE_SPI1 FALSE #define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE #define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE #define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1 #define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1 #define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1 #define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 #define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 #define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 #define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/* /*
* ST driver system settings. * ST driver system settings.
*/ */
#define STM32_ST_IRQ_PRIORITY 8 #define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 2 #define STM32_ST_USE_TIMER 2
/* /*
* UART driver system settings. * UART driver system settings.
*/ */
#define STM32_UART_USE_USART1 FALSE #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE #define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE #define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12 #define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12 #define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12 #define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/* /*
* USB driver system settings. * USB driver system settings.
*/ */
#define STM32_USB_USE_USB1 TRUE #define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE #define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 #define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 #define STM32_USB_USB1_LP_IRQ_PRIORITY 14
#endif /* _MCUCONF_H_ */ #endif /* _MCUCONF_H_ */

1048
keyboards/chibios_test/teensy_lc_onekey/chconf.h
Unescape View File

@ -1,524 +1,524 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
/** /**
* @file templates/chconf.h * @file templates/chconf.h
* @brief Configuration file template. * @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it * @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings. * contains the application specific kernel settings.
* *
* @addtogroup config * @addtogroup config
* @details Kernel related settings and hooks. * @details Kernel related settings and hooks.
* @{ * @{
*/ */
#ifndef CHCONF_H #ifndef CHCONF_H
#define CHCONF_H #define CHCONF_H
#define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name System timers settings * @name System timers settings
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief System time counter resolution. * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits. * @note Allowed values are 16 or 32 bits.
*/ */
#define CH_CFG_ST_RESOLUTION 32 #define CH_CFG_ST_RESOLUTION 32
/** /**
* @brief System tick frequency. * @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This * @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit. * setting also defines the system tick time unit.
*/ */
#define CH_CFG_ST_FREQUENCY 1000 #define CH_CFG_ST_FREQUENCY 1000
/** /**
* @brief Time delta constant for the tick-less mode. * @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic * @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number * periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive. * of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to * The value one is not valid, timeouts are rounded up to
* this value. * this value.
*/ */
#define CH_CFG_ST_TIMEDELTA 0 #define CH_CFG_ST_TIMEDELTA 0
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Kernel parameters and options * @name Kernel parameters and options
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Round robin interval. * @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the * @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero * threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority * round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive. * threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact * @note Disabling the round robin preemption makes the kernel more compact
* and generally faster. * and generally faster.
* @note The round robin preemption is not supported in tickless mode and * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case. * must be set to zero in that case.
*/ */
#define CH_CFG_TIME_QUANTUM 20 #define CH_CFG_TIME_QUANTUM 20
/** /**
* @brief Managed RAM size. * @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero * @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made * then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through * available to the heap allocator and/or can be used directly through
* the simplified core memory allocator. * the simplified core memory allocator.
* *
* @note In order to let the OS manage the whole RAM the linker script must * @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols. * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE. * @note Requires @p CH_CFG_USE_MEMCORE.
*/ */
#define CH_CFG_MEMCORE_SIZE 0 #define CH_CFG_MEMCORE_SIZE 0
/** /**
* @brief Idle thread automatic spawn suppression. * @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit() * @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main() * does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an * function becomes the idle thread and must implement an
* infinite loop. * infinite loop.
*/ */
#define CH_CFG_NO_IDLE_THREAD FALSE #define CH_CFG_NO_IDLE_THREAD FALSE
/* Use __WFI in the idle thread for waiting. Does lower the power /* Use __WFI in the idle thread for waiting. Does lower the power
* consumption. */ * consumption. */
#define CORTEX_ENABLE_WFI_IDLE TRUE #define CORTEX_ENABLE_WFI_IDLE TRUE
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Performance options * @name Performance options
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief OS optimization. * @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code * @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist. * is used when two possible implementations exist.
* *
* @note This is not related to the compiler optimization options. * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_OPTIMIZE_SPEED TRUE #define CH_CFG_OPTIMIZE_SPEED TRUE
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Subsystem options * @name Subsystem options
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Time Measurement APIs. * @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in * @details If enabled then the time measurement APIs are included in
* the kernel. * the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_TM FALSE #define CH_CFG_USE_TM FALSE
/** /**
* @brief Threads registry APIs. * @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel. * @details If enabled then the registry APIs are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_REGISTRY TRUE #define CH_CFG_USE_REGISTRY TRUE
/** /**
* @brief Threads synchronization APIs. * @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in * @details If enabled then the @p chThdWait() function is included in
* the kernel. * the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_WAITEXIT TRUE #define CH_CFG_USE_WAITEXIT TRUE
/** /**
* @brief Semaphores APIs. * @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel. * @details If enabled then the Semaphores APIs are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_SEMAPHORES TRUE #define CH_CFG_USE_SEMAPHORES TRUE
/** /**
* @brief Semaphores queuing mode. * @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order. * priority rather than in FIFO order.
* *
* @note The default is @p FALSE. Enable this if you have special * @note The default is @p FALSE. Enable this if you have special
* requirements. * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES. * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/ */
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
/** /**
* @brief Mutexes APIs. * @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel. * @details If enabled then the mutexes APIs are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_MUTEXES TRUE #define CH_CFG_USE_MUTEXES TRUE
/** /**
* @brief Enables recursive behavior on mutexes. * @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased * @note Recursive mutexes are heavier and have an increased
* memory footprint. * memory footprint.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES. * @note Requires @p CH_CFG_USE_MUTEXES.
*/ */
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
/** /**
* @brief Conditional Variables APIs. * @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included * @details If enabled then the conditional variables APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES. * @note Requires @p CH_CFG_USE_MUTEXES.
*/ */
#define CH_CFG_USE_CONDVARS TRUE #define CH_CFG_USE_CONDVARS TRUE
/** /**
* @brief Conditional Variables APIs with timeout. * @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout * @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel. * specification are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS. * @note Requires @p CH_CFG_USE_CONDVARS.
*/ */
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
/** /**
* @brief Events Flags APIs. * @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel. * @details If enabled then the event flags APIs are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_EVENTS TRUE #define CH_CFG_USE_EVENTS TRUE
/** /**
* @brief Events Flags APIs with timeout. * @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification * @details If enabled then the events APIs with timeout specification
* are included in the kernel. * are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS. * @note Requires @p CH_CFG_USE_EVENTS.
*/ */
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE #define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/** /**
* @brief Synchronous Messages APIs. * @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included * @details If enabled then the synchronous messages APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_MESSAGES TRUE #define CH_CFG_USE_MESSAGES TRUE
/** /**
* @brief Synchronous Messages queuing mode. * @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in * @details If enabled then messages are served by priority rather than in
* FIFO order. * FIFO order.
* *
* @note The default is @p FALSE. Enable this if you have special * @note The default is @p FALSE. Enable this if you have special
* requirements. * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES. * @note Requires @p CH_CFG_USE_MESSAGES.
*/ */
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE #define CH_CFG_USE_MESSAGES_PRIORITY FALSE
/** /**
* @brief Mailboxes APIs. * @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are * @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel. * included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES. * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/ */
#define CH_CFG_USE_MAILBOXES TRUE #define CH_CFG_USE_MAILBOXES TRUE
/** /**
* @brief Core Memory Manager APIs. * @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included * @details If enabled then the core memory manager APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_MEMCORE TRUE #define CH_CFG_USE_MEMCORE TRUE
/** /**
* @brief Heap Allocator APIs. * @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included * @details If enabled then the memory heap allocator APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES. * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended. * @note Mutexes are recommended.
*/ */
#define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_HEAP TRUE
/** /**
* @brief Memory Pools Allocator APIs. * @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included * @details If enabled then the memory pools allocator APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_MEMPOOLS TRUE #define CH_CFG_USE_MEMPOOLS TRUE
/** /**
* @brief Dynamic Threads APIs. * @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included * @details If enabled then the dynamic threads creation APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/ */
#define CH_CFG_USE_DYNAMIC TRUE #define CH_CFG_USE_DYNAMIC TRUE
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Debug options * @name Debug options
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Debug option, kernel statistics. * @brief Debug option, kernel statistics.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_STATISTICS FALSE #define CH_DBG_STATISTICS FALSE
/** /**
* @brief Debug option, system state check. * @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked * @details If enabled the correct call protocol for system APIs is checked
* at runtime. * at runtime.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_SYSTEM_STATE_CHECK TRUE #define CH_DBG_SYSTEM_STATE_CHECK TRUE
/** /**
* @brief Debug option, parameters checks. * @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input * @details If enabled then the checks on the API functions input
* parameters are activated. * parameters are activated.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_ENABLE_CHECKS TRUE #define CH_DBG_ENABLE_CHECKS TRUE
/** /**
* @brief Debug option, consistency checks. * @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are * @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel, * activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks. * runtime anomalies and port-defined checks.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_ENABLE_ASSERTS TRUE #define CH_DBG_ENABLE_ASSERTS TRUE
/** /**
* @brief Debug option, trace buffer. * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated. * @details If enabled then the trace buffer is activated.
* *
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/ */
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/** /**
* @brief Trace buffer entries. * @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED. * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/ */
#define CH_DBG_TRACE_BUFFER_SIZE 128 #define CH_DBG_TRACE_BUFFER_SIZE 128
/** /**
* @brief Debug option, stack checks. * @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed. * @details If enabled then a runtime stack check is performed.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way. * @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports. * It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL. * @p panic_msg variable set to @p NULL.
*/ */
#define CH_DBG_ENABLE_STACK_CHECK TRUE #define CH_DBG_ENABLE_STACK_CHECK TRUE
/** /**
* @brief Debug option, stacks initialization. * @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte * @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the * value when a thread is created. This can be useful for the
* runtime measurement of the used stack. * runtime measurement of the used stack.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_FILL_THREADS TRUE #define CH_DBG_FILL_THREADS TRUE
/** /**
* @brief Debug option, threads profiling. * @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread. * counts the system ticks occurred while executing the thread.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
* @note This debug option is not currently compatible with the * @note This debug option is not currently compatible with the
* tickless mode. * tickless mode.
*/ */
#define CH_DBG_THREADS_PROFILING FALSE #define CH_DBG_THREADS_PROFILING FALSE
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Kernel hooks * @name Kernel hooks
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Threads descriptor structure extension. * @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure. * @details User fields added to the end of the @p thread_t structure.
*/ */
#define CH_CFG_THREAD_EXTRA_FIELDS \ #define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/ /* Add threads custom fields here.*/
/** /**
* @brief Threads initialization hook. * @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API. * @details User initialization code added to the @p chThdInit() API.
* *
* @note It is invoked from within @p chThdInit() and implicitly from all * @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs. * the threads creation APIs.
*/ */
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ #define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \ /* Add threads initialization code here.*/ \
} }
/** /**
* @brief Threads finalization hook. * @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API. * @details User finalization code added to the @p chThdExit() API.
*/ */
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \ /* Add threads finalization code here.*/ \
} }
/** /**
* @brief Context switch hook. * @brief Context switch hook.
* @details This hook is invoked just before switching between threads. * @details This hook is invoked just before switching between threads.
*/ */
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \ /* Context switch code here.*/ \
} }
/** /**
* @brief ISR enter hook. * @brief ISR enter hook.
*/ */
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ #define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \ /* IRQ prologue code here.*/ \
} }
/** /**
* @brief ISR exit hook. * @brief ISR exit hook.
*/ */
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ #define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \ /* IRQ epilogue code here.*/ \
} }
/** /**
* @brief Idle thread enter hook. * @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions * @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here. * should be invoked from here.
* @note This macro can be used to activate a power saving mode. * @note This macro can be used to activate a power saving mode.
*/ */
#define CH_CFG_IDLE_ENTER_HOOK() { \ #define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \ /* Idle-enter code here.*/ \
} }
/** /**
* @brief Idle thread leave hook. * @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions * @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here. * should be invoked from here.
* @note This macro can be used to deactivate a power saving mode. * @note This macro can be used to deactivate a power saving mode.
*/ */
#define CH_CFG_IDLE_LEAVE_HOOK() { \ #define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \ /* Idle-leave code here.*/ \
} }
/** /**
* @brief Idle Loop hook. * @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop. * @details This hook is continuously invoked by the idle thread loop.
*/ */
#define CH_CFG_IDLE_LOOP_HOOK() { \ #define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \ /* Idle loop code here.*/ \
} }
/** /**
* @brief System tick event hook. * @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately * @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue. * after processing the virtual timers queue.
*/ */
#define CH_CFG_SYSTEM_TICK_HOOK() { \ #define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \ /* System tick event code here.*/ \
} }
/** /**
* @brief System halt hook. * @brief System halt hook.
* @details This hook is invoked in case to a system halting error before * @details This hook is invoked in case to a system halting error before
* the system is halted. * the system is halted.
*/ */
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ #define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \ /* System halt code here.*/ \
} }
/** /**
* @brief Trace hook. * @brief Trace hook.
* @details This hook is invoked each time a new record is written in the * @details This hook is invoked each time a new record is written in the
* trace buffer. * trace buffer.
*/ */
#define CH_CFG_TRACE_HOOK(tep) { \ #define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \ /* Trace code here.*/ \
} }
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/ /*===========================================================================*/
#endif /* CHCONF_H */ #endif /* CHCONF_H */
/** @} */ /** @} */

374
keyboards/chibios_test/teensy_lc_onekey/halconf.h
Unescape View File

@ -1,187 +1,187 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
/** /**
* @file templates/halconf.h * @file templates/halconf.h
* @brief HAL configuration header. * @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the * @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use * various device drivers from your application. You may also use
* this file in order to override the device drivers default settings. * this file in order to override the device drivers default settings.
* *
* @addtogroup HAL_CONF * @addtogroup HAL_CONF
* @{ * @{
*/ */
#ifndef _HALCONF_H_ #ifndef _HALCONF_H_
#define _HALCONF_H_ #define _HALCONF_H_
#include "mcuconf.h" #include "mcuconf.h"
/** /**
* @brief Enables the PAL subsystem. * @brief Enables the PAL subsystem.
*/ */
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE #define HAL_USE_PAL TRUE
#endif #endif
/** /**
* @brief Enables the ADC subsystem. * @brief Enables the ADC subsystem.
*/ */
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE #define HAL_USE_ADC FALSE
#endif #endif
/** /**
* @brief Enables the CAN subsystem. * @brief Enables the CAN subsystem.
*/ */
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE #define HAL_USE_CAN FALSE
#endif #endif
/** /**
* @brief Enables the DAC subsystem. * @brief Enables the DAC subsystem.
*/ */
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE #define HAL_USE_DAC FALSE
#endif #endif
/** /**
* @brief Enables the EXT subsystem. * @brief Enables the EXT subsystem.
*/ */
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE #define HAL_USE_EXT FALSE
#endif #endif
/** /**
* @brief Enables the GPT subsystem. * @brief Enables the GPT subsystem.
*/ */
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE #define HAL_USE_GPT FALSE
#endif #endif
/** /**
* @brief Enables the I2C subsystem. * @brief Enables the I2C subsystem.
*/ */
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE #define HAL_USE_I2C FALSE
#endif #endif
/** /**
* @brief Enables the I2S subsystem. * @brief Enables the I2S subsystem.
*/ */
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE #define HAL_USE_I2S FALSE
#endif #endif
/** /**
* @brief Enables the ICU subsystem. * @brief Enables the ICU subsystem.
*/ */
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE #define HAL_USE_ICU FALSE
#endif #endif
/** /**
* @brief Enables the MAC subsystem. * @brief Enables the MAC subsystem.
*/ */
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE #define HAL_USE_MAC FALSE
#endif #endif
/** /**
* @brief Enables the MMC_SPI subsystem. * @brief Enables the MMC_SPI subsystem.
*/ */
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE #define HAL_USE_MMC_SPI FALSE
#endif #endif
/** /**
* @brief Enables the PWM subsystem. * @brief Enables the PWM subsystem.
*/ */
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE #define HAL_USE_PWM FALSE
#endif #endif
/** /**
* @brief Enables the RTC subsystem. * @brief Enables the RTC subsystem.
*/ */
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE #define HAL_USE_RTC FALSE
#endif #endif
/** /**
* @brief Enables the SDC subsystem. * @brief Enables the SDC subsystem.
*/ */
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE #define HAL_USE_SDC FALSE
#endif #endif
/** /**
* @brief Enables the SERIAL subsystem. * @brief Enables the SERIAL subsystem.
*/ */
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE #define HAL_USE_SERIAL FALSE
#endif #endif
/** /**
* @brief Enables the SERIAL over USB subsystem. * @brief Enables the SERIAL over USB subsystem.
*/ */
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE #define HAL_USE_SERIAL_USB FALSE
#endif #endif
/** /**
* @brief Enables the SPI subsystem. * @brief Enables the SPI subsystem.
*/ */
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE #define HAL_USE_SPI FALSE
#endif #endif
/** /**
* @brief Enables the UART subsystem. * @brief Enables the UART subsystem.
*/ */
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) #if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE #define HAL_USE_UART FALSE
#endif #endif
/** /**
* @brief Enables the USB subsystem. * @brief Enables the USB subsystem.
*/ */
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) #if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE #define HAL_USE_USB TRUE
#endif #endif
/** /**
* @brief Enables the WDG subsystem. * @brief Enables the WDG subsystem.
*/ */
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE #define HAL_USE_WDG FALSE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* USB driver related settings. */ /* USB driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Enables synchronous APIs. * @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space. * @note Disabling this option saves both code and data space.
*/ */
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) #if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE #define USB_USE_WAIT TRUE
#endif #endif
#endif /* _HALCONF_H_ */ #endif /* _HALCONF_H_ */
/** @} */ /** @} */

110
keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
Unescape View File

@ -1,55 +1,55 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
#ifndef _MCUCONF_H_ #ifndef _MCUCONF_H_
#define _MCUCONF_H_ #define _MCUCONF_H_
#define KL2x_MCUCONF #define KL2x_MCUCONF
/* /*
* HAL driver system settings. * HAL driver system settings.
*/ */
#if 1 #if 1
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ /* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE #define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
#define KINETIS_PLLCLK_FREQUENCY 96000000UL #define KINETIS_PLLCLK_FREQUENCY 96000000UL
#define KINETIS_SYSCLK_FREQUENCY 48000000UL #define KINETIS_SYSCLK_FREQUENCY 48000000UL
#endif #endif
#if 0 #if 0
/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ /* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI #define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ #define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ #define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ #define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ #define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */
#endif #endif
/* /*
* SERIAL driver system settings. * SERIAL driver system settings.
*/ */
#define KINETIS_SERIAL_USE_UART0 TRUE #define KINETIS_SERIAL_USE_UART0 TRUE
/* /*
* USB driver settings * USB driver settings
*/ */
#define KINETIS_USB_USE_USB0 TRUE #define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default is for K20x */ /* Need to redefine this, since the default is for K20x */
/* This is for Teensy LC; you should comment it out (or change to 5) /* This is for Teensy LC; you should comment it out (or change to 5)
* for Teensy 3.x */ * for Teensy 3.x */
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 #define KINETIS_USB_USB0_IRQ_PRIORITY 2
#endif /* _MCUCONF_H_ */ #endif /* _MCUCONF_H_ */

148
keyboards/gh60/Makefile
Unescape View File

@ -1,74 +1,74 @@
# MCU name # MCU name
#MCU = at90usb1287 #MCU = at90usb1287
MCU = atmega32u4 MCU = atmega32u4
# Processor frequency. # Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the # This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to # processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code. # automatically to create a 32-bit value in your source code.
# #
# This will be an integer division of F_USB below, as it is sourced by # This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value # F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to # does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate # reflect the processor speed set externally so that the code can use accurate
# software delays. # software delays.
F_CPU = 16000000 F_CPU = 16000000
# #
# LUFA specific # LUFA specific
# #
# Target architecture (see library "Board Types" documentation). # Target architecture (see library "Board Types" documentation).
ARCH = AVR8 ARCH = AVR8
# Input clock frequency. # Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the # This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may # input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the # differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed # raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your # at the end, this will be done automatically to create a 32-bit value in your
# source code. # source code.
# #
# If no clock division is performed on the input clock inside the AVR (via the # If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes* # Boot Section Size in *bytes*
# Teensy halfKay 512 # Teensy halfKay 512
# Teensy++ halfKay 1024 # Teensy++ halfKay 1024
# Atmel DFU loader 4096 # Atmel DFU loader 4096
# LUFA bootloader 4096 # LUFA bootloader 4096
# USBaspLoader 2048 # USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096 OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
# CONSOLE_ENABLE ?= yes # Console for debug(+400) # CONSOLE_ENABLE ?= yes # Console for debug(+400)
# COMMAND_ENABLE ?= yes # Commands for debug and configuration # COMMAND_ENABLE ?= yes # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend # SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality # BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
# MIDI_ENABLE ?= YES # MIDI controls # MIDI_ENABLE ?= YES # MIDI controls
# UNICODE_ENABLE ?= YES # Unicode # UNICODE_ENABLE ?= YES # Unicode
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID # BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
ifndef QUANTUM_DIR ifndef QUANTUM_DIR
include ../../Makefile include ../../Makefile
endif endif

322
keyboards/gh60/config.h
Unescape View File

@ -1,161 +1,161 @@
/* /*
Copyright 2012 Jun Wako <wakojun@gmail.com> Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or the Free Software Foundation, either version 2 of the License, or
(at your option) any later version. (at your option) any later version.
This program is distributed in the hope that it will be useful, This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details. GNU General Public License for more details.
You should have received a copy of the GNU General Public License You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#ifndef CONFIG_H #ifndef CONFIG_H
#define CONFIG_H #define CONFIG_H
#include "config_common.h" #include "config_common.h"
/* USB Device descriptor parameter */ /* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED #define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060 #define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001 #define DEVICE_VER 0x0001
#define MANUFACTURER geekhack #define MANUFACTURER geekhack
#define PRODUCT GH60 #define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60 #define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */ /* key matrix size */
#define MATRIX_ROWS 5 #define MATRIX_ROWS 5
#define MATRIX_COLS 14 #define MATRIX_COLS 14
/* /*
* Keyboard Matrix Assignments * Keyboard Matrix Assignments
* *
* Change this to how you wired your keyboard * Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right * COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom * ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
* *
*/ */
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A // Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } // #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C // Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS #define UNUSED_PINS
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5 #define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */ /* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST
/* number of backlight levels */ /* number of backlight levels */
#define BACKLIGHT_LEVELS 3 #define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE #define LOCKING_RESYNC_ENABLE
/* /*
* Force NKRO * Force NKRO
* *
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.) * makefile for this to work.)
* *
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset. * until the next keyboard reset.
* *
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage. * fully operational during normal computer usage.
* *
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a * bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up. * power-up.
* *
*/ */
//#define FORCE_NKRO //#define FORCE_NKRO
/* /*
* Magic Key Options * Magic Key Options
* *
* Magic keys are hotkey commands that allow control over firmware functions of * Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program, * the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html * found here: https://www.pjrc.com/teensy/hid_listen.html
* *
* The options below allow the magic key functionality to be changed. This is * The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support. * useful if your keyboard/keypad is missing keys and you want magic key support.
* *
*/ */
/* key combination for magic key command */ /* key combination for magic key command */
#define IS_COMMAND() ( \ #define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
) )
/* control how magic key switches layers */ /* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */ /* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H //#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH //#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D //#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X //#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K //#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M //#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V //#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S //#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C //#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC //#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0 //#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1 //#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2 //#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3 //#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4 //#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5 //#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6 //#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7 //#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8 //#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9 //#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE //#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS //#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E //#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N //#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z //#define MAGIC_KEY_SLEEP_LED Z
/* /*
* Feature disable options * Feature disable options
* These options are also useful to firmware size reduction. * These options are also useful to firmware size reduction.
*/ */
/* disable debug print */ /* disable debug print */
//#define NO_DEBUG //#define NO_DEBUG
/* disable print */ /* disable print */
//#define NO_PRINT //#define NO_PRINT
/* disable action features */ /* disable action features */
//#define NO_ACTION_LAYER //#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING //#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT //#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO //#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION //#define NO_ACTION_FUNCTION
#endif #endif

50
keyboards/gh60/gh60.c
Unescape View File

@ -1,25 +1,25 @@
#include "gh60.h" #include "gh60.h"
void led_set_kb(uint8_t usb_led) { void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
gh60_caps_led_on(); gh60_caps_led_on();
} else { } else {
gh60_caps_led_off(); gh60_caps_led_off();
} }
// if (usb_led & (1<<USB_LED_NUM_LOCK)) { // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
// gh60_esc_led_on(); // gh60_esc_led_on();
// } else { // } else {
// gh60_esc_led_off(); // gh60_esc_led_off();
// } // }
// if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
// gh60_fn_led_on(); // gh60_fn_led_on();
// } else { // } else {
// gh60_fn_led_off(); // gh60_fn_led_off();
// } // }
led_set_user(usb_led); led_set_user(usb_led);
} }

148
keyboards/gh60/gh60.h
Unescape View File

@ -1,74 +1,74 @@
#ifndef GH60_H #ifndef GH60_H
#define GH60_H #define GH60_H
#include "quantum.h" #include "quantum.h"
#include "led.h" #include "led.h"
/* GH60 LEDs /* GH60 LEDs
* GPIO pads * GPIO pads
* 0 F7 WASD LEDs * 0 F7 WASD LEDs
* 1 F6 ESC LED * 1 F6 ESC LED
* 2 F5 FN LED * 2 F5 FN LED
* 3 F4 POKER Arrow LEDs * 3 F4 POKER Arrow LEDs
* B2 Capslock LED * B2 Capslock LED
* B0 not connected * B0 not connected
*/ */
inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); } inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); } inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); } inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); } inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
/* GH60 keymap definition macro /* GH60 keymap definition macro
* K2C, K31 and K3C are extra keys for ISO * K2C, K31 and K3C are extra keys for ISO
*/ */
#define KEYMAP( \ #define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
) { \ ) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
} }
/* ANSI valiant. No extra keys for ISO */ /* ANSI valiant. No extra keys for ISO */
#define KEYMAP_ANSI( \ #define KEYMAP_ANSI( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
K40, K41, K42, K45, K4A, K4B, K4C, K4D \ K40, K41, K42, K45, K4A, K4B, K4C, K4D \
) KEYMAP( \ ) KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \ K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \ K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
) )
#define KEYMAP_HHKB( \ #define KEYMAP_HHKB( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
K40, K41, K42, K45, K4A, K4B, K4C, K4D \ K40, K41, K42, K45, K4A, K4B, K4C, K4D \
) KEYMAP( \ ) KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
) )
#endif #endif

224
keyboards/gh60/keymaps/robotmaxtron/Makefile
Unescape View File

@ -1,112 +1,112 @@
#---------------------------------------------------------------------------- #----------------------------------------------------------------------------
# On command line: # On command line:
# #
# make all = Make software. # make all = Make software.
# #
# make clean = Clean out built project files. # make clean = Clean out built project files.
# #
# make coff = Convert ELF to AVR COFF. # make coff = Convert ELF to AVR COFF.
# #
# make extcoff = Convert ELF to AVR Extended COFF. # make extcoff = Convert ELF to AVR Extended COFF.
# #
# make program = Download the hex file to the device. # make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD) # Please customize your programmer settings(PROGRAM_CMD)
# #
# make teensy = Download the hex file to the device, using teensy_loader_cli. # make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed). # (must have teensy_loader_cli installed).
# #
# make dfu = Download the hex file to the device, using dfu-programmer (must # make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed). # have dfu-programmer installed).
# #
# make flip = Download the hex file to the device, using Atmel FLIP (must # make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed). # have Atmel FLIP installed).
# #
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed). # (must have dfu-programmer installed).
# #
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed). # (must have Atmel FLIP installed).
# #
# make debug = Start either simulavr or avarice as specified for debugging, # make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging. # with avr-gdb or avr-insight as the front end for debugging.
# #
# make filename.s = Just compile filename.c into the assembler code only. # make filename.s = Just compile filename.c into the assembler code only.
# #
# make filename.i = Create a preprocessed source file for use in submitting # make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project. # bug reports to the GCC project.
# #
# To rebuild project do "make clean" then "make all". # To rebuild project do "make clean" then "make all".
#---------------------------------------------------------------------------- #----------------------------------------------------------------------------
# MCU name # MCU name
#MCU = at90usb1287 #MCU = at90usb1287
MCU = atmega32u4 MCU = atmega32u4
# Processor frequency. # Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the # This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to # processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code. # automatically to create a 32-bit value in your source code.
# #
# This will be an integer division of F_USB below, as it is sourced by # This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value # F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to # does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate # reflect the processor speed set externally so that the code can use accurate
# software delays. # software delays.
F_CPU = 16000000 F_CPU = 16000000
# #
# LUFA specific # LUFA specific
# #
# Target architecture (see library "Board Types" documentation). # Target architecture (see library "Board Types" documentation).
ARCH = AVR8 ARCH = AVR8
# Input clock frequency. # Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the # This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may # input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the # differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed # raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your # at the end, this will be done automatically to create a 32-bit value in your
# source code. # source code.
# #
# If no clock division is performed on the input clock inside the AVR (via the # If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes* # Boot Section Size in *bytes*
# Teensy halfKay 512 # Teensy halfKay 512
# Teensy++ halfKay 1024 # Teensy++ halfKay 1024
# Atmel DFU loader 4096 # Atmel DFU loader 4096
# LUFA bootloader 4096 # LUFA bootloader 4096
# USBaspLoader 2048 # USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096 OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
# CONSOLE_ENABLE ?= yes # Console for debug(+400) # CONSOLE_ENABLE ?= yes # Console for debug(+400)
# COMMAND_ENABLE ?= yes # Commands for debug and configuration # COMMAND_ENABLE ?= yes # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend # SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality # BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
# MIDI_ENABLE ?= YES # MIDI controls # MIDI_ENABLE ?= YES # MIDI controls
# UNICODE_ENABLE ?= YES # Unicode # UNICODE_ENABLE ?= YES # Unicode
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID # BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
ifndef QUANTUM_DIR ifndef QUANTUM_DIR
include ../../../../Makefile include ../../../../Makefile
endif endif

380
keyboards/gh60/keymaps/robotmaxtron/config.h
Unescape View File

@ -1,190 +1,190 @@
/* /*
Copyright 2012 Jun Wako <wakojun@gmail.com> Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or the Free Software Foundation, either version 2 of the License, or
(at your option) any later version. (at your option) any later version.
This program is distributed in the hope that it will be useful, This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details. GNU General Public License for more details.
You should have received a copy of the GNU General Public License You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#ifndef CONFIG_H #ifndef CONFIG_H
#define CONFIG_H #define CONFIG_H
#include "config_common.h" #include "config_common.h"
/* USB Device descriptor parameter */ /* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED #define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060 #define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001 #define DEVICE_VER 0x0001
#define MANUFACTURER geekhack #define MANUFACTURER geekhack
#define PRODUCT GH60 #define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60 #define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */ /* key matrix size */
#define MATRIX_ROWS 5 #define MATRIX_ROWS 5
#define MATRIX_COLS 14 #define MATRIX_COLS 14
/* /*
* Keyboard Matrix Assignments * Keyboard Matrix Assignments
* *
* Change this to how you wired your keyboard * Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right * COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom * ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
* *
*/ */
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A // Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } // #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C // Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS #define UNUSED_PINS
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5 #define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */ /* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST
/* number of backlight levels */ /* number of backlight levels */
#define BACKLIGHT_LEVELS 3 #define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE #define LOCKING_RESYNC_ENABLE
/* /*
* Force NKRO * Force NKRO
* *
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.) * makefile for this to work.)
* *
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset. * until the next keyboard reset.
* *
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage. * fully operational during normal computer usage.
* *
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a * bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up. * power-up.
* *
*/ */
//#define FORCE_NKRO //#define FORCE_NKRO
/* /*
* Magic Key Options * Magic Key Options
* *
* Magic keys are hotkey commands that allow control over firmware functions of * Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program, * the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html * found here: https://www.pjrc.com/teensy/hid_listen.html
* *
* The options below allow the magic key functionality to be changed. This is * The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support. * useful if your keyboard/keypad is missing keys and you want magic key support.
* *
*/ */
/* key combination for magic key command */ /* key combination for magic key command */
#define IS_COMMAND() ( \ #define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
) )
/* control how magic key switches layers */ /* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */ /* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H //#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH //#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D //#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X //#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K //#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M //#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V //#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S //#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C //#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC //#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0 //#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1 //#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2 //#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3 //#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4 //#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5 //#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6 //#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7 //#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8 //#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9 //#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE //#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS //#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E //#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N //#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z //#define MAGIC_KEY_SLEEP_LED Z
/* /*
* Feature disable options * Feature disable options
* These options are also useful to firmware size reduction. * These options are also useful to firmware size reduction.
*/ */
/* disable debug print */ /* disable debug print */
//#define NO_DEBUG //#define NO_DEBUG
/* disable print */ /* disable print */
//#define NO_PRINT //#define NO_PRINT
/* disable action features */ /* disable action features */
//#define NO_ACTION_LAYER //#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING //#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT //#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO //#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION //#define NO_ACTION_FUNCTION
/* /*
* RGB Underglow * RGB Underglow
* These settings are for the F4 by default: * These settings are for the F4 by default:
* *
* *
* #define ws2812_PORTREG PORTF * #define ws2812_PORTREG PORTF
* #define ws2812_DDRREG DDRF * #define ws2812_DDRREG DDRF
* #define ws2812_pin PF4 * #define ws2812_pin PF4
* #define RGBLED_NUM 14 // Number of LEDs * #define RGBLED_NUM 14 // Number of LEDs
* #define RGBLIGHT_HUE_STEP 10 * #define RGBLIGHT_HUE_STEP 10
* #define RGBLIGHT_SAT_STEP 17 * #define RGBLIGHT_SAT_STEP 17
* #define RGBLIGHT_VAL_STEP 17 * #define RGBLIGHT_VAL_STEP 17
* *
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
*/ */
/* Deprecated code below /* Deprecated code below
#define ws2812_PORTREG PORTF #define ws2812_PORTREG PORTF
#define ws2812_DDRREG DDRF #define ws2812_DDRREG DDRF
#define ws2812_pin PF4 #define ws2812_pin PF4
*/ */
#define RGB_DI_PIN F4 #define RGB_DI_PIN F4
#define RGBLIGHT_TIMER #define RGBLIGHT_TIMER
#define RGBLED_NUM 8 // Number of LEDs #define RGBLED_NUM 8 // Number of LEDs
#define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_VAL_STEP 8
#endif #endif

34
keyboards/gh60/pinout.txt
Unescape View File

@ -1,18 +1,18 @@
/* Column pin configuration /* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
*/ */
/* Row pin configuration /* Row pin configuration
* row: 0 1 2 3 4 * row: 0 1 2 3 4
* pin: D0 D1 D2 D3 D5 * pin: D0 D1 D2 D3 D5
*/ */
GPIO pads GPIO pads
0 F7 WASD LEDs 0 F7 WASD LEDs
1 F6 ESC LED 1 F6 ESC LED
2 F5 FN LED 2 F5 FN LED
3 F4 POKER Arrow LEDs 3 F4 POKER Arrow LEDs
B2 Capslock LED B2 Capslock LED
B0 not connected B0 not connected

120
keyboards/gh60/readme.md
Unescape View File

@ -1,60 +1,60 @@
## gh60 Rev C keyboard firmware ## gh60 Rev C keyboard firmware
![gh60 Rev C PCB](gh60revc.jpg) ![gh60 Rev C PCB](gh60revc.jpg)
/* Column pin configuration /* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
*/ */
/* Row pin configuration /* Row pin configuration
* row: 0 1 2 3 4 * row: 0 1 2 3 4
* pin: D0 D1 D2 D3 D5 * pin: D0 D1 D2 D3 D5
*/ */
GPIO pads GPIO pads
0 F7 WASD LEDs 0 F7 WASD LEDs
1 F6 ESC LED 1 F6 ESC LED
2 F5 FN LED 2 F5 FN LED
3 F4 POKER Arrow LEDs 3 F4 POKER Arrow LEDs
B2 Capslock LED B2 Capslock LED
B0 not connected B0 not connected
Functions to controls LED clusters Functions to controls LED clusters
gh60_caps_led_on() gh60_caps_led_on()
gh60_poker_leds_on() gh60_poker_leds_on()
gh60_fn_led_on() gh60_fn_led_on()
gh60_esc_led_on() gh60_esc_led_on()
gh60_wasd_leds_on() gh60_wasd_leds_on()
gh60_caps_led_off() gh60_caps_led_off()
gh60_poker_leds_off() gh60_poker_leds_off()
gh60_fn_led_off() gh60_fn_led_off()
gh60_esc_led_off() gh60_esc_led_off()
gh60_wasd_leds_off() gh60_wasd_leds_off()
====================== ======================
## Quantum MK Firmware ## Quantum MK Firmware
For the full Quantum feature list, see [the parent readme.md](/readme.md). For the full Quantum feature list, see [the parent readme.md](/readme.md).
## Building ## Building
Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently. Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default ### Default
To build with the default keymap, simply run `make`. To build with the default keymap, simply run `make`.
### Other Keymaps ### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
``` ```
$ make KEYMAP=[default|jack|<name>] $ make KEYMAP=[default|jack|<name>]
``` ```
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

1048
keyboards/infinity_chibios/chconf.h
Unescape View File

@ -1,524 +1,524 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
/** /**
* @file templates/chconf.h * @file templates/chconf.h
* @brief Configuration file template. * @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it * @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings. * contains the application specific kernel settings.
* *
* @addtogroup config * @addtogroup config
* @details Kernel related settings and hooks. * @details Kernel related settings and hooks.
* @{ * @{
*/ */
#ifndef CHCONF_H #ifndef CHCONF_H
#define CHCONF_H #define CHCONF_H
#define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name System timers settings * @name System timers settings
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief System time counter resolution. * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits. * @note Allowed values are 16 or 32 bits.
*/ */
#define CH_CFG_ST_RESOLUTION 32 #define CH_CFG_ST_RESOLUTION 32
/** /**
* @brief System tick frequency. * @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This * @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit. * setting also defines the system tick time unit.
*/ */
#define CH_CFG_ST_FREQUENCY 1000 #define CH_CFG_ST_FREQUENCY 1000
/** /**
* @brief Time delta constant for the tick-less mode. * @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic * @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number * periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive. * of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to * The value one is not valid, timeouts are rounded up to
* this value. * this value.
*/ */
#define CH_CFG_ST_TIMEDELTA 0 #define CH_CFG_ST_TIMEDELTA 0
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Kernel parameters and options * @name Kernel parameters and options
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Round robin interval. * @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the * @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero * threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority * round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive. * threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact * @note Disabling the round robin preemption makes the kernel more compact
* and generally faster. * and generally faster.
* @note The round robin preemption is not supported in tickless mode and * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case. * must be set to zero in that case.
*/ */
#define CH_CFG_TIME_QUANTUM 20 #define CH_CFG_TIME_QUANTUM 20
/** /**
* @brief Managed RAM size. * @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero * @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made * then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through * available to the heap allocator and/or can be used directly through
* the simplified core memory allocator. * the simplified core memory allocator.
* *
* @note In order to let the OS manage the whole RAM the linker script must * @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols. * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE. * @note Requires @p CH_CFG_USE_MEMCORE.
*/ */
#define CH_CFG_MEMCORE_SIZE 0 #define CH_CFG_MEMCORE_SIZE 0
/** /**
* @brief Idle thread automatic spawn suppression. * @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit() * @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main() * does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an * function becomes the idle thread and must implement an
* infinite loop. * infinite loop.
*/ */
#define CH_CFG_NO_IDLE_THREAD FALSE #define CH_CFG_NO_IDLE_THREAD FALSE
/* Use __WFI in the idle thread for waiting. Does lower the power /* Use __WFI in the idle thread for waiting. Does lower the power
* consumption. */ * consumption. */
#define CORTEX_ENABLE_WFI_IDLE TRUE #define CORTEX_ENABLE_WFI_IDLE TRUE
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Performance options * @name Performance options
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief OS optimization. * @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code * @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist. * is used when two possible implementations exist.
* *
* @note This is not related to the compiler optimization options. * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_OPTIMIZE_SPEED TRUE #define CH_CFG_OPTIMIZE_SPEED TRUE
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Subsystem options * @name Subsystem options
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Time Measurement APIs. * @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in * @details If enabled then the time measurement APIs are included in
* the kernel. * the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_TM FALSE #define CH_CFG_USE_TM FALSE
/** /**
* @brief Threads registry APIs. * @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel. * @details If enabled then the registry APIs are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_REGISTRY TRUE #define CH_CFG_USE_REGISTRY TRUE
/** /**
* @brief Threads synchronization APIs. * @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in * @details If enabled then the @p chThdWait() function is included in
* the kernel. * the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_WAITEXIT TRUE #define CH_CFG_USE_WAITEXIT TRUE
/** /**
* @brief Semaphores APIs. * @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel. * @details If enabled then the Semaphores APIs are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_SEMAPHORES TRUE #define CH_CFG_USE_SEMAPHORES TRUE
/** /**
* @brief Semaphores queuing mode. * @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order. * priority rather than in FIFO order.
* *
* @note The default is @p FALSE. Enable this if you have special * @note The default is @p FALSE. Enable this if you have special
* requirements. * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES. * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/ */
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
/** /**
* @brief Mutexes APIs. * @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel. * @details If enabled then the mutexes APIs are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_MUTEXES TRUE #define CH_CFG_USE_MUTEXES TRUE
/** /**
* @brief Enables recursive behavior on mutexes. * @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased * @note Recursive mutexes are heavier and have an increased
* memory footprint. * memory footprint.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES. * @note Requires @p CH_CFG_USE_MUTEXES.
*/ */
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
/** /**
* @brief Conditional Variables APIs. * @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included * @details If enabled then the conditional variables APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES. * @note Requires @p CH_CFG_USE_MUTEXES.
*/ */
#define CH_CFG_USE_CONDVARS TRUE #define CH_CFG_USE_CONDVARS TRUE
/** /**
* @brief Conditional Variables APIs with timeout. * @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout * @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel. * specification are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS. * @note Requires @p CH_CFG_USE_CONDVARS.
*/ */
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
/** /**
* @brief Events Flags APIs. * @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel. * @details If enabled then the event flags APIs are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_EVENTS TRUE #define CH_CFG_USE_EVENTS TRUE
/** /**
* @brief Events Flags APIs with timeout. * @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification * @details If enabled then the events APIs with timeout specification
* are included in the kernel. * are included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS. * @note Requires @p CH_CFG_USE_EVENTS.
*/ */
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE #define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/** /**
* @brief Synchronous Messages APIs. * @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included * @details If enabled then the synchronous messages APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_MESSAGES TRUE #define CH_CFG_USE_MESSAGES TRUE
/** /**
* @brief Synchronous Messages queuing mode. * @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in * @details If enabled then messages are served by priority rather than in
* FIFO order. * FIFO order.
* *
* @note The default is @p FALSE. Enable this if you have special * @note The default is @p FALSE. Enable this if you have special
* requirements. * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES. * @note Requires @p CH_CFG_USE_MESSAGES.
*/ */
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE #define CH_CFG_USE_MESSAGES_PRIORITY FALSE
/** /**
* @brief Mailboxes APIs. * @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are * @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel. * included in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES. * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/ */
#define CH_CFG_USE_MAILBOXES TRUE #define CH_CFG_USE_MAILBOXES TRUE
/** /**
* @brief Core Memory Manager APIs. * @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included * @details If enabled then the core memory manager APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_MEMCORE TRUE #define CH_CFG_USE_MEMCORE TRUE
/** /**
* @brief Heap Allocator APIs. * @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included * @details If enabled then the memory heap allocator APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES. * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended. * @note Mutexes are recommended.
*/ */
#define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_HEAP TRUE
/** /**
* @brief Memory Pools Allocator APIs. * @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included * @details If enabled then the memory pools allocator APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
*/ */
#define CH_CFG_USE_MEMPOOLS TRUE #define CH_CFG_USE_MEMPOOLS TRUE
/** /**
* @brief Dynamic Threads APIs. * @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included * @details If enabled then the dynamic threads creation APIs are included
* in the kernel. * in the kernel.
* *
* @note The default is @p TRUE. * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/ */
#define CH_CFG_USE_DYNAMIC TRUE #define CH_CFG_USE_DYNAMIC TRUE
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Debug options * @name Debug options
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Debug option, kernel statistics. * @brief Debug option, kernel statistics.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_STATISTICS FALSE #define CH_DBG_STATISTICS FALSE
/** /**
* @brief Debug option, system state check. * @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked * @details If enabled the correct call protocol for system APIs is checked
* at runtime. * at runtime.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_SYSTEM_STATE_CHECK FALSE #define CH_DBG_SYSTEM_STATE_CHECK FALSE
/** /**
* @brief Debug option, parameters checks. * @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input * @details If enabled then the checks on the API functions input
* parameters are activated. * parameters are activated.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_ENABLE_CHECKS FALSE #define CH_DBG_ENABLE_CHECKS FALSE
/** /**
* @brief Debug option, consistency checks. * @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are * @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel, * activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks. * runtime anomalies and port-defined checks.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_ENABLE_ASSERTS FALSE #define CH_DBG_ENABLE_ASSERTS FALSE
/** /**
* @brief Debug option, trace buffer. * @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated. * @details If enabled then the trace buffer is activated.
* *
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/ */
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/** /**
* @brief Trace buffer entries. * @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED. * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/ */
#define CH_DBG_TRACE_BUFFER_SIZE 128 #define CH_DBG_TRACE_BUFFER_SIZE 128
/** /**
* @brief Debug option, stack checks. * @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed. * @details If enabled then a runtime stack check is performed.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way. * @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports. * It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL. * @p panic_msg variable set to @p NULL.
*/ */
#define CH_DBG_ENABLE_STACK_CHECK FALSE #define CH_DBG_ENABLE_STACK_CHECK FALSE
/** /**
* @brief Debug option, stacks initialization. * @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte * @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the * value when a thread is created. This can be useful for the
* runtime measurement of the used stack. * runtime measurement of the used stack.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
*/ */
#define CH_DBG_FILL_THREADS FALSE #define CH_DBG_FILL_THREADS FALSE
/** /**
* @brief Debug option, threads profiling. * @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread. * counts the system ticks occurred while executing the thread.
* *
* @note The default is @p FALSE. * @note The default is @p FALSE.
* @note This debug option is not currently compatible with the * @note This debug option is not currently compatible with the
* tickless mode. * tickless mode.
*/ */
#define CH_DBG_THREADS_PROFILING FALSE #define CH_DBG_THREADS_PROFILING FALSE
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @name Kernel hooks * @name Kernel hooks
* @{ * @{
*/ */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Threads descriptor structure extension. * @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure. * @details User fields added to the end of the @p thread_t structure.
*/ */
#define CH_CFG_THREAD_EXTRA_FIELDS \ #define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/ /* Add threads custom fields here.*/
/** /**
* @brief Threads initialization hook. * @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API. * @details User initialization code added to the @p chThdInit() API.
* *
* @note It is invoked from within @p chThdInit() and implicitly from all * @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs. * the threads creation APIs.
*/ */
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ #define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \ /* Add threads initialization code here.*/ \
} }
/** /**
* @brief Threads finalization hook. * @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API. * @details User finalization code added to the @p chThdExit() API.
*/ */
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \ /* Add threads finalization code here.*/ \
} }
/** /**
* @brief Context switch hook. * @brief Context switch hook.
* @details This hook is invoked just before switching between threads. * @details This hook is invoked just before switching between threads.
*/ */
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \ /* Context switch code here.*/ \
} }
/** /**
* @brief ISR enter hook. * @brief ISR enter hook.
*/ */
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ #define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \ /* IRQ prologue code here.*/ \
} }
/** /**
* @brief ISR exit hook. * @brief ISR exit hook.
*/ */
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ #define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \ /* IRQ epilogue code here.*/ \
} }
/** /**
* @brief Idle thread enter hook. * @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions * @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here. * should be invoked from here.
* @note This macro can be used to activate a power saving mode. * @note This macro can be used to activate a power saving mode.
*/ */
#define CH_CFG_IDLE_ENTER_HOOK() { \ #define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \ /* Idle-enter code here.*/ \
} }
/** /**
* @brief Idle thread leave hook. * @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions * @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here. * should be invoked from here.
* @note This macro can be used to deactivate a power saving mode. * @note This macro can be used to deactivate a power saving mode.
*/ */
#define CH_CFG_IDLE_LEAVE_HOOK() { \ #define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \ /* Idle-leave code here.*/ \
} }
/** /**
* @brief Idle Loop hook. * @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop. * @details This hook is continuously invoked by the idle thread loop.
*/ */
#define CH_CFG_IDLE_LOOP_HOOK() { \ #define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \ /* Idle loop code here.*/ \
} }
/** /**
* @brief System tick event hook. * @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately * @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue. * after processing the virtual timers queue.
*/ */
#define CH_CFG_SYSTEM_TICK_HOOK() { \ #define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \ /* System tick event code here.*/ \
} }
/** /**
* @brief System halt hook. * @brief System halt hook.
* @details This hook is invoked in case to a system halting error before * @details This hook is invoked in case to a system halting error before
* the system is halted. * the system is halted.
*/ */
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ #define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \ /* System halt code here.*/ \
} }
/** /**
* @brief Trace hook. * @brief Trace hook.
* @details This hook is invoked each time a new record is written in the * @details This hook is invoked each time a new record is written in the
* trace buffer. * trace buffer.
*/ */
#define CH_CFG_TRACE_HOOK(tep) { \ #define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \ /* Trace code here.*/ \
} }
/** @} */ /** @} */
/*===========================================================================*/ /*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/ /*===========================================================================*/
#endif /* CHCONF_H */ #endif /* CHCONF_H */
/** @} */ /** @} */

706
keyboards/infinity_chibios/halconf.h
Unescape View File

@ -1,353 +1,353 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
/** /**
* @file templates/halconf.h * @file templates/halconf.h
* @brief HAL configuration header. * @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the * @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use * various device drivers from your application. You may also use
* this file in order to override the device drivers default settings. * this file in order to override the device drivers default settings.
* *
* @addtogroup HAL_CONF * @addtogroup HAL_CONF
* @{ * @{
*/ */
#ifndef _HALCONF_H_ #ifndef _HALCONF_H_
#define _HALCONF_H_ #define _HALCONF_H_
#include "mcuconf.h" #include "mcuconf.h"
/** /**
* @brief Enables the PAL subsystem. * @brief Enables the PAL subsystem.
*/ */
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE #define HAL_USE_PAL TRUE
#endif #endif
/** /**
* @brief Enables the ADC subsystem. * @brief Enables the ADC subsystem.
*/ */
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE #define HAL_USE_ADC FALSE
#endif #endif
/** /**
* @brief Enables the CAN subsystem. * @brief Enables the CAN subsystem.
*/ */
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE #define HAL_USE_CAN FALSE
#endif #endif
/** /**
* @brief Enables the DAC subsystem. * @brief Enables the DAC subsystem.
*/ */
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE #define HAL_USE_DAC FALSE
#endif #endif
/** /**
* @brief Enables the EXT subsystem. * @brief Enables the EXT subsystem.
*/ */
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE #define HAL_USE_EXT FALSE
#endif #endif
/** /**
* @brief Enables the GPT subsystem. * @brief Enables the GPT subsystem.
*/ */
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE #define HAL_USE_GPT FALSE
#endif #endif
/** /**
* @brief Enables the I2C subsystem. * @brief Enables the I2C subsystem.
*/ */
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE #define HAL_USE_I2C FALSE
#endif #endif
/** /**
* @brief Enables the I2S subsystem. * @brief Enables the I2S subsystem.
*/ */
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE #define HAL_USE_I2S FALSE
#endif #endif
/** /**
* @brief Enables the ICU subsystem. * @brief Enables the ICU subsystem.
*/ */
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE #define HAL_USE_ICU FALSE
#endif #endif
/** /**
* @brief Enables the MAC subsystem. * @brief Enables the MAC subsystem.
*/ */
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE #define HAL_USE_MAC FALSE
#endif #endif
/** /**
* @brief Enables the MMC_SPI subsystem. * @brief Enables the MMC_SPI subsystem.
*/ */
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE #define HAL_USE_MMC_SPI FALSE
#endif #endif
/** /**
* @brief Enables the PWM subsystem. * @brief Enables the PWM subsystem.
*/ */
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE #define HAL_USE_PWM FALSE
#endif #endif
/** /**
* @brief Enables the RTC subsystem. * @brief Enables the RTC subsystem.
*/ */
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE #define HAL_USE_RTC FALSE
#endif #endif
/** /**
* @brief Enables the SDC subsystem. * @brief Enables the SDC subsystem.
*/ */
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE #define HAL_USE_SDC FALSE
#endif #endif
/** /**
* @brief Enables the SERIAL subsystem. * @brief Enables the SERIAL subsystem.
*/ */
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE #define HAL_USE_SERIAL FALSE
#endif #endif
/** /**
* @brief Enables the SERIAL over USB subsystem. * @brief Enables the SERIAL over USB subsystem.
*/ */
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB TRUE #define HAL_USE_SERIAL_USB TRUE
#endif #endif
/** /**
* @brief Enables the SPI subsystem. * @brief Enables the SPI subsystem.
*/ */
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE #define HAL_USE_SPI FALSE
#endif #endif
/** /**
* @brief Enables the UART subsystem. * @brief Enables the UART subsystem.
*/ */
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) #if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE #define HAL_USE_UART FALSE
#endif #endif
/** /**
* @brief Enables the USB subsystem. * @brief Enables the USB subsystem.
*/ */
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) #if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE #define HAL_USE_USB TRUE
#endif #endif
/** /**
* @brief Enables the WDG subsystem. * @brief Enables the WDG subsystem.
*/ */
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE #define HAL_USE_WDG FALSE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* ADC driver related settings. */ /* ADC driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Enables synchronous APIs. * @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space. * @note Disabling this option saves both code and data space.
*/ */
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE #define ADC_USE_WAIT TRUE
#endif #endif
/** /**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space. * @note Disabling this option saves both code and data space.
*/ */
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE #define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* CAN driver related settings. */ /* CAN driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Sleep mode related APIs inclusion switch. * @brief Sleep mode related APIs inclusion switch.
*/ */
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE #define CAN_USE_SLEEP_MODE TRUE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* I2C driver related settings. */ /* I2C driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Enables the mutual exclusion APIs on the I2C bus. * @brief Enables the mutual exclusion APIs on the I2C bus.
*/ */
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) #if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE #define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* MAC driver related settings. */ /* MAC driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Enables an event sources for incoming packets. * @brief Enables an event sources for incoming packets.
*/ */
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) #if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE #define MAC_USE_ZERO_COPY FALSE
#endif #endif
/** /**
* @brief Enables an event sources for incoming packets. * @brief Enables an event sources for incoming packets.
*/ */
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) #if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE #define MAC_USE_EVENTS TRUE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* MMC_SPI driver related settings. */ /* MMC_SPI driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Delays insertions. * @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting * @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with * routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however. * lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not * This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU. * use a DMA channel and heavily loads the CPU.
*/ */
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) #if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE #define MMC_NICE_WAITING TRUE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* SDC driver related settings. */ /* SDC driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Number of initialization attempts before rejecting the card. * @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals. * @note Attempts are performed at 10mS intervals.
*/ */
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) #if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100 #define SDC_INIT_RETRY 100
#endif #endif
/** /**
* @brief Include support for MMC cards. * @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept * @note MMC support is not yet implemented so this option must be kept
* at @p FALSE. * at @p FALSE.
*/ */
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) #if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE #define SDC_MMC_SUPPORT FALSE
#endif #endif
/** /**
* @brief Delays insertions. * @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting * @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with * routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however. * lower priority, this may slow down the driver a bit however.
*/ */
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) #if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE #define SDC_NICE_WAITING TRUE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* SERIAL driver related settings. */ /* SERIAL driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Default bit rate. * @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the * @details Configuration parameter, this is the baud rate selected for the
* default configuration. * default configuration.
*/ */
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400 #define SERIAL_DEFAULT_BITRATE 38400
#endif #endif
/** /**
* @brief Serial buffers size. * @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue * @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application. * buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive * @note The default is 64 bytes for both the transmission and receive
* buffers. * buffers.
*/ */
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16 #define SERIAL_BUFFERS_SIZE 16
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* SERIAL_USB driver related setting. */ /* SERIAL_USB driver related setting. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Serial over USB buffers size. * @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of * @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size. * the USB data endpoint maximum packet size.
* @note The default is 64 bytes for both the transmission and receive * @note The default is 64 bytes for both the transmission and receive
* buffers. * buffers.
*/ */
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) #if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 256 #define SERIAL_USB_BUFFERS_SIZE 256
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* SPI driver related settings. */ /* SPI driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Enables synchronous APIs. * @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space. * @note Disabling this option saves both code and data space.
*/ */
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) #if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE #define SPI_USE_WAIT TRUE
#endif #endif
/** /**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space. * @note Disabling this option saves both code and data space.
*/ */
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) #if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE #define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif #endif
/*===========================================================================*/ /*===========================================================================*/
/* USB driver related settings. */ /* USB driver related settings. */
/*===========================================================================*/ /*===========================================================================*/
/** /**
* @brief Enables synchronous APIs. * @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space. * @note Disabling this option saves both code and data space.
*/ */
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) #if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE #define USB_USE_WAIT TRUE
#endif #endif
#endif /* _HALCONF_H_ */ #endif /* _HALCONF_H_ */
/** @} */ /** @} */

110
keyboards/infinity_chibios/mcuconf.h
Unescape View File

@ -1,55 +1,55 @@
/* /*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License"); Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License. you may not use this file except in compliance with the License.
You may obtain a copy of the License at You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and See the License for the specific language governing permissions and
limitations under the License. limitations under the License.
*/ */
#ifndef _MCUCONF_H_ #ifndef _MCUCONF_H_
#define _MCUCONF_H_ #define _MCUCONF_H_
#define K20x_MCUCONF #define K20x_MCUCONF
/* /*
* HAL driver system settings. * HAL driver system settings.
*/ */
/* Select the MCU clocking mode below by enabling the appropriate block. */ /* Select the MCU clocking mode below by enabling the appropriate block. */
#define KINETIS_NO_INIT FALSE #define KINETIS_NO_INIT FALSE
/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ /* FEI mode - 48 MHz with internal 32.768 kHz crystal */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI #define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ #define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ #define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ #define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
#define KINETIS_CLKDIV1_OUTDIV1 1 #define KINETIS_CLKDIV1_OUTDIV1 1
#define KINETIS_CLKDIV1_OUTDIV2 1 #define KINETIS_CLKDIV1_OUTDIV2 1
#define KINETIS_CLKDIV1_OUTDIV4 2 #define KINETIS_CLKDIV1_OUTDIV4 2
#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY #define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 #define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
/* /*
* SERIAL driver system settings. * SERIAL driver system settings.
*/ */
#define KINETIS_SERIAL_USE_UART0 TRUE #define KINETIS_SERIAL_USE_UART0 TRUE
/* /*
* USB driver settings * USB driver settings
*/ */
#define KINETIS_USB_USE_USB0 TRUE #define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default is for K20x */ /* Need to redefine this, since the default is for K20x */
/* This is for Teensy LC; you should comment it out (or change to 5) /* This is for Teensy LC; you should comment it out (or change to 5)
* for Teensy 3.x */ * for Teensy 3.x */
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 #define KINETIS_USB_USB0_IRQ_PRIORITY 2
#endif /* _MCUCONF_H_ */ #endif /* _MCUCONF_H_ */

1000
tmk_core/common/avr/xprintf.S
Unescape View File

@ -1,500 +1,500 @@
;---------------------------------------------------------------------------; ;---------------------------------------------------------------------------;
; Extended itoa, puts, printf and atoi (C)ChaN, 2011 ; Extended itoa, puts, printf and atoi (C)ChaN, 2011
;---------------------------------------------------------------------------; ;---------------------------------------------------------------------------;
// Base size is 152 bytes // Base size is 152 bytes
#define CR_CRLF 0 // Convert \n to \r\n (+10 bytes) #define CR_CRLF 0 // Convert \n to \r\n (+10 bytes)
#define USE_XPRINTF 1 // Enable xprintf function (+194 bytes) #define USE_XPRINTF 1 // Enable xprintf function (+194 bytes)
#define USE_XSPRINTF 0 // Add xsprintf function (+78 bytes) #define USE_XSPRINTF 0 // Add xsprintf function (+78 bytes)
#define USE_XFPRINTF 0 // Add xfprintf function (+54 bytes) #define USE_XFPRINTF 0 // Add xfprintf function (+54 bytes)
#define USE_XATOI 0 // Enable xatoi function (+182 bytes) #define USE_XATOI 0 // Enable xatoi function (+182 bytes)
#if FLASHEND > 0x1FFFF #if FLASHEND > 0x1FFFF
#error xitoa module does not support 256K devices #error xitoa module does not support 256K devices
#endif #endif
.nolist .nolist
#include <avr/io.h> // Include device specific definitions. #include <avr/io.h> // Include device specific definitions.
.list .list
#ifdef SPM_PAGESIZE // Recent devices have "lpm Rd,Z+" and "movw". #ifdef SPM_PAGESIZE // Recent devices have "lpm Rd,Z+" and "movw".
.macro _LPMI reg .macro _LPMI reg
lpm \reg, Z+ lpm \reg, Z+
.endm .endm
.macro _MOVW dh,dl, sh,sl .macro _MOVW dh,dl, sh,sl
movw \dl, \sl movw \dl, \sl
.endm .endm
#else // Earlier devices do not have "lpm Rd,Z+" nor "movw". #else // Earlier devices do not have "lpm Rd,Z+" nor "movw".
.macro _LPMI reg .macro _LPMI reg
lpm lpm
mov \reg, r0 mov \reg, r0
adiw ZL, 1 adiw ZL, 1
.endm .endm
.macro _MOVW dh,dl, sh,sl .macro _MOVW dh,dl, sh,sl
mov \dl, \sl mov \dl, \sl
mov \dh, \sh mov \dh, \sh
.endm .endm
#endif #endif
;--------------------------------------------------------------------------- ;---------------------------------------------------------------------------
; Stub function to forward to user output function ; Stub function to forward to user output function
; ;
;Prototype: void xputc (char chr // a character to be output ;Prototype: void xputc (char chr // a character to be output
; ); ; );
;Size: 12/12 words ;Size: 12/12 words
.section .bss .section .bss
.global xfunc_out ; xfunc_out must be initialized before using this module. .global xfunc_out ; xfunc_out must be initialized before using this module.
xfunc_out: .ds.w 1 xfunc_out: .ds.w 1
.section .text .section .text
.func xputc .func xputc
.global xputc .global xputc
xputc: xputc:
#if CR_CRLF #if CR_CRLF
cpi r24, 10 ;LF --> CRLF cpi r24, 10 ;LF --> CRLF
brne 1f ; brne 1f ;
ldi r24, 13 ; ldi r24, 13 ;
rcall 1f ; rcall 1f ;
ldi r24, 10 ;/ ldi r24, 10 ;/
1: 1:
#endif #endif
push ZH push ZH
push ZL push ZL
lds ZL, xfunc_out+0 ;Pointer to the registered output function. lds ZL, xfunc_out+0 ;Pointer to the registered output function.
lds ZH, xfunc_out+1 ;/ lds ZH, xfunc_out+1 ;/
sbiw ZL, 0 ;Skip if null sbiw ZL, 0 ;Skip if null
breq 2f ;/ breq 2f ;/
icall icall
2: pop ZL 2: pop ZL
pop ZH pop ZH
ret ret
.endfunc .endfunc
;--------------------------------------------------------------------------- ;---------------------------------------------------------------------------
; Direct ROM string output ; Direct ROM string output
; ;
;Prototype: void xputs (const char *str_p // rom string to be output ;Prototype: void xputs (const char *str_p // rom string to be output
; ); ; );
.func xputs .func xputs
.global xputs .global xputs
xputs: xputs:
_MOVW ZH,ZL, r25,r24 ; Z = pointer to rom string _MOVW ZH,ZL, r25,r24 ; Z = pointer to rom string
1: _LPMI r24 1: _LPMI r24
cpi r24, 0 cpi r24, 0
breq 2f breq 2f
rcall xputc rcall xputc
rjmp 1b rjmp 1b
2: ret 2: ret
.endfunc .endfunc
;--------------------------------------------------------------------------- ;---------------------------------------------------------------------------
; Extended direct numeral string output (32bit version) ; Extended direct numeral string output (32bit version)
; ;
;Prototype: void xitoa (long value, // value to be output ;Prototype: void xitoa (long value, // value to be output
; char radix, // radix ; char radix, // radix
; char width); // minimum width ; char width); // minimum width
; ;
.func xitoa .func xitoa
.global xitoa .global xitoa
xitoa: xitoa:
;r25:r22 = value, r20 = base, r18 = digits ;r25:r22 = value, r20 = base, r18 = digits
clr r31 ;r31 = stack level clr r31 ;r31 = stack level
ldi r30, ' ' ;r30 = sign ldi r30, ' ' ;r30 = sign
ldi r19, ' ' ;r19 = filler ldi r19, ' ' ;r19 = filler
sbrs r20, 7 ;When base indicates signd format and the value sbrs r20, 7 ;When base indicates signd format and the value
rjmp 0f ;is minus, add a '-'. rjmp 0f ;is minus, add a '-'.
neg r20 ; neg r20 ;
sbrs r25, 7 ; sbrs r25, 7 ;
rjmp 0f ; rjmp 0f ;
ldi r30, '-' ; ldi r30, '-' ;
com r22 ; com r22 ;
com r23 ; com r23 ;
com r24 ; com r24 ;
com r25 ; com r25 ;
adc r22, r1 ; adc r22, r1 ;
adc r23, r1 ; adc r23, r1 ;
adc r24, r1 ; adc r24, r1 ;
adc r25, r1 ;/ adc r25, r1 ;/
0: sbrs r18, 7 ;When digits indicates zero filled, 0: sbrs r18, 7 ;When digits indicates zero filled,
rjmp 1f ;filler is '0'. rjmp 1f ;filler is '0'.
neg r18 ; neg r18 ;
ldi r19, '0' ;/ ldi r19, '0' ;/
;----- string conversion loop ;----- string conversion loop
1: ldi r21, 32 ;r26 = r25:r22 % r20 1: ldi r21, 32 ;r26 = r25:r22 % r20
clr r26 ;r25:r22 /= r20 clr r26 ;r25:r22 /= r20
2: lsl r22 ; 2: lsl r22 ;
rol r23 ; rol r23 ;
rol r24 ; rol r24 ;
rol r25 ; rol r25 ;
rol r26 ; rol r26 ;
cp r26, r20 ; cp r26, r20 ;
brcs 3f ; brcs 3f ;
sub r26, r20 ; sub r26, r20 ;
inc r22 ; inc r22 ;
3: dec r21 ; 3: dec r21 ;
brne 2b ;/ brne 2b ;/
cpi r26, 10 ;r26 is a numeral digit '0'-'F' cpi r26, 10 ;r26 is a numeral digit '0'-'F'
brcs 4f ; brcs 4f ;
subi r26, -7 ; subi r26, -7 ;
4: subi r26, -'0' ;/ 4: subi r26, -'0' ;/
push r26 ;Stack it push r26 ;Stack it
inc r31 ;/ inc r31 ;/
cp r22, r1 ;Repeat until r25:r22 gets zero cp r22, r1 ;Repeat until r25:r22 gets zero
cpc r23, r1 ; cpc r23, r1 ;
cpc r24, r1 ; cpc r24, r1 ;
cpc r25, r1 ; cpc r25, r1 ;
brne 1b ;/ brne 1b ;/
cpi r30, '-' ;Minus sign if needed cpi r30, '-' ;Minus sign if needed
brne 5f ; brne 5f ;
push r30 ; push r30 ;
inc r31 ;/ inc r31 ;/
5: cp r31, r18 ;Filler 5: cp r31, r18 ;Filler
brcc 6f ; brcc 6f ;
push r19 ; push r19 ;
inc r31 ; inc r31 ;
rjmp 5b ;/ rjmp 5b ;/
6: pop r24 ;Flush stacked digits and exit 6: pop r24 ;Flush stacked digits and exit
rcall xputc ; rcall xputc ;
dec r31 ; dec r31 ;
brne 6b ;/ brne 6b ;/
ret ret
.endfunc .endfunc
;---------------------------------------------------------------------------; ;---------------------------------------------------------------------------;
; Formatted string output (16/32bit version) ; Formatted string output (16/32bit version)
; ;
;Prototype: ;Prototype:
; void __xprintf (const char *format_p, ...); ; void __xprintf (const char *format_p, ...);
; void __xsprintf(char*, const char *format_p, ...); ; void __xsprintf(char*, const char *format_p, ...);
; void __xfprintf(void(*func)(char), const char *format_p, ...); ; void __xfprintf(void(*func)(char), const char *format_p, ...);
; ;
#if USE_XPRINTF #if USE_XPRINTF
.func xvprintf .func xvprintf
xvprintf: xvprintf:
ld ZL, Y+ ;Z = pointer to format string ld ZL, Y+ ;Z = pointer to format string
ld ZH, Y+ ;/ ld ZH, Y+ ;/
0: _LPMI r24 ;Get a format char 0: _LPMI r24 ;Get a format char
cpi r24, 0 ;End of format string? cpi r24, 0 ;End of format string?
breq 90f ;/ breq 90f ;/
cpi r24, '%' ;Is format? cpi r24, '%' ;Is format?
breq 20f ;/ breq 20f ;/
1: rcall xputc ;Put a normal character 1: rcall xputc ;Put a normal character
rjmp 0b ;/ rjmp 0b ;/
90: ret 90: ret
20: ldi r18, 0 ;r18: digits 20: ldi r18, 0 ;r18: digits
clt ;T: filler clt ;T: filler
_LPMI r21 ;Get flags _LPMI r21 ;Get flags
cpi r21, '%' ;Is a %? cpi r21, '%' ;Is a %?
breq 1b ;/ breq 1b ;/
cpi r21, '0' ;Zero filled? cpi r21, '0' ;Zero filled?
brne 23f ; brne 23f ;
set ;/ set ;/
22: _LPMI r21 ;Get width 22: _LPMI r21 ;Get width
23: cpi r21, '9'+1 ; 23: cpi r21, '9'+1 ;
brcc 24f ; brcc 24f ;
subi r21, '0' ; subi r21, '0' ;
brcs 90b ; brcs 90b ;
lsl r18 ; lsl r18 ;
mov r0, r18 ; mov r0, r18 ;
lsl r18 ; lsl r18 ;
lsl r18 ; lsl r18 ;
add r18, r0 ; add r18, r0 ;
add r18, r21 ; add r18, r21 ;
rjmp 22b ;/ rjmp 22b ;/
24: brtc 25f ;get value (low word) 24: brtc 25f ;get value (low word)
neg r18 ; neg r18 ;
25: ld r24, Y+ ; 25: ld r24, Y+ ;
ld r25, Y+ ;/ ld r25, Y+ ;/
cpi r21, 'c' ;Is type character? cpi r21, 'c' ;Is type character?
breq 1b ;/ breq 1b ;/
cpi r21, 's' ;Is type RAM string? cpi r21, 's' ;Is type RAM string?
breq 50f ;/ breq 50f ;/
cpi r21, 'S' ;Is type ROM string? cpi r21, 'S' ;Is type ROM string?
breq 60f ;/ breq 60f ;/
_MOVW r23,r22,r25,r24 ;r25:r22 = value _MOVW r23,r22,r25,r24 ;r25:r22 = value
clr r24 ; clr r24 ;
clr r25 ; clr r25 ;
clt ;/ clt ;/
cpi r21, 'l' ;Is long int? cpi r21, 'l' ;Is long int?
brne 26f ; brne 26f ;
ld r24, Y+ ;get value (high word) ld r24, Y+ ;get value (high word)
ld r25, Y+ ; ld r25, Y+ ;
set ; set ;
_LPMI r21 ;/ _LPMI r21 ;/
26: cpi r21, 'd' ;Is type signed decimal? 26: cpi r21, 'd' ;Is type signed decimal?
brne 27f ;/ brne 27f ;/
ldi r20, -10 ; ldi r20, -10 ;
brts 40f ; brts 40f ;
sbrs r23, 7 ; sbrs r23, 7 ;
rjmp 40f ; rjmp 40f ;
ldi r24, -1 ; ldi r24, -1 ;
ldi r25, -1 ; ldi r25, -1 ;
rjmp 40f ;/ rjmp 40f ;/
27: cpi r21, 'u' ;Is type unsigned decimal? 27: cpi r21, 'u' ;Is type unsigned decimal?
ldi r20, 10 ; ldi r20, 10 ;
breq 40f ;/ breq 40f ;/
cpi r21, 'X' ;Is type hexdecimal? cpi r21, 'X' ;Is type hexdecimal?
ldi r20, 16 ; ldi r20, 16 ;
breq 40f ;/ breq 40f ;/
cpi r21, 'b' ;Is type binary? cpi r21, 'b' ;Is type binary?
ldi r20, 2 ; ldi r20, 2 ;
breq 40f ;/ breq 40f ;/
ret ;abort ret ;abort
40: push ZH ;Output the value 40: push ZH ;Output the value
push ZL ; push ZL ;
rcall xitoa ; rcall xitoa ;
42: pop ZL ; 42: pop ZL ;
pop ZH ; pop ZH ;
rjmp 0b ;/ rjmp 0b ;/
50: push ZH ;Put a string on the RAM 50: push ZH ;Put a string on the RAM
push ZL push ZL
_MOVW ZH,ZL, r25,r24 _MOVW ZH,ZL, r25,r24
51: ld r24, Z+ 51: ld r24, Z+
cpi r24, 0 cpi r24, 0
breq 42b breq 42b
rcall xputc rcall xputc
rjmp 51b rjmp 51b
60: push ZH ;Put a string on the ROM 60: push ZH ;Put a string on the ROM
push ZL push ZL
rcall xputs rcall xputs
rjmp 42b rjmp 42b
.endfunc .endfunc
.func __xprintf .func __xprintf
.global __xprintf .global __xprintf
__xprintf: __xprintf:
push YH push YH
push YL push YL
in YL, _SFR_IO_ADDR(SPL) in YL, _SFR_IO_ADDR(SPL)
#ifdef SPH #ifdef SPH
in YH, _SFR_IO_ADDR(SPH) in YH, _SFR_IO_ADDR(SPH)
#else #else
clr YH clr YH
#endif #endif
adiw YL, 5 ;Y = pointer to arguments adiw YL, 5 ;Y = pointer to arguments
rcall xvprintf rcall xvprintf
pop YL pop YL
pop YH pop YH
ret ret
.endfunc .endfunc
#if USE_XSPRINTF #if USE_XSPRINTF
.func __xsprintf .func __xsprintf
putram: putram:
_MOVW ZH,ZL, r15,r14 _MOVW ZH,ZL, r15,r14
st Z+, r24 st Z+, r24
_MOVW r15,r14, ZH,ZL _MOVW r15,r14, ZH,ZL
ret ret
.global __xsprintf .global __xsprintf
__xsprintf: __xsprintf:
push YH push YH
push YL push YL
in YL, _SFR_IO_ADDR(SPL) in YL, _SFR_IO_ADDR(SPL)
#ifdef SPH #ifdef SPH
in YH, _SFR_IO_ADDR(SPH) in YH, _SFR_IO_ADDR(SPH)
#else #else
clr YH clr YH
#endif #endif
adiw YL, 5 ;Y = pointer to arguments adiw YL, 5 ;Y = pointer to arguments
lds ZL, xfunc_out+0 ;Save registered output function lds ZL, xfunc_out+0 ;Save registered output function
lds ZH, xfunc_out+1 ; lds ZH, xfunc_out+1 ;
push ZL ; push ZL ;
push ZH ;/ push ZH ;/
ldi ZL, lo8(pm(putram));Set local output function ldi ZL, lo8(pm(putram));Set local output function
ldi ZH, hi8(pm(putram)); ldi ZH, hi8(pm(putram));
sts xfunc_out+0, ZL ; sts xfunc_out+0, ZL ;
sts xfunc_out+1, ZH ;/ sts xfunc_out+1, ZH ;/
push r15 ;Initialize pointer to string buffer push r15 ;Initialize pointer to string buffer
push r14 ; push r14 ;
ld r14, Y+ ; ld r14, Y+ ;
ld r15, Y+ ;/ ld r15, Y+ ;/
rcall xvprintf rcall xvprintf
_MOVW ZH,ZL, r15,r14 ;Terminate string _MOVW ZH,ZL, r15,r14 ;Terminate string
st Z, r1 ; st Z, r1 ;
pop r14 ; pop r14 ;
pop r15 ;/ pop r15 ;/
pop ZH ;Restore registered output function pop ZH ;Restore registered output function
pop ZL ; pop ZL ;
sts xfunc_out+0, ZL ; sts xfunc_out+0, ZL ;
sts xfunc_out+1, ZH ;/ sts xfunc_out+1, ZH ;/
pop YL pop YL
pop YH pop YH
ret ret
.endfunc .endfunc
#endif #endif
#if USE_XFPRINTF #if USE_XFPRINTF
.func __xfprintf .func __xfprintf
.global __xfprintf .global __xfprintf
__xfprintf: __xfprintf:
push YH push YH
push YL push YL
in YL, _SFR_IO_ADDR(SPL) in YL, _SFR_IO_ADDR(SPL)
#ifdef SPH #ifdef SPH
in YH, _SFR_IO_ADDR(SPH) in YH, _SFR_IO_ADDR(SPH)
#else #else
clr YH clr YH
#endif #endif
adiw YL, 5 ;Y = pointer to arguments adiw YL, 5 ;Y = pointer to arguments
lds ZL, xfunc_out+0 ;Save registered output function lds ZL, xfunc_out+0 ;Save registered output function
lds ZH, xfunc_out+1 ; lds ZH, xfunc_out+1 ;
push ZL ; push ZL ;
push ZH ;/ push ZH ;/
ld ZL, Y+ ;Set output function ld ZL, Y+ ;Set output function
ld ZH, Y+ ; ld ZH, Y+ ;
sts xfunc_out+0, ZL ; sts xfunc_out+0, ZL ;
sts xfunc_out+1, ZH ;/ sts xfunc_out+1, ZH ;/
rcall xvprintf rcall xvprintf
pop ZH ;Restore registered output function pop ZH ;Restore registered output function
pop ZL ; pop ZL ;
sts xfunc_out+0, ZL ; sts xfunc_out+0, ZL ;
sts xfunc_out+1, ZH ;/ sts xfunc_out+1, ZH ;/
pop YL pop YL
pop YH pop YH
ret ret
.endfunc .endfunc
#endif #endif
#endif #endif
;--------------------------------------------------------------------------- ;---------------------------------------------------------------------------
; Extended numeral string input ; Extended numeral string input
; ;
;Prototype: ;Prototype:
; char xatoi ( /* 1: Successful, 0: Failed */ ; char xatoi ( /* 1: Successful, 0: Failed */
; const char **str, /* pointer to pointer to source string */ ; const char **str, /* pointer to pointer to source string */
; long *res /* result */ ; long *res /* result */
; ); ; );
; ;
#if USE_XATOI #if USE_XATOI
.func xatoi .func xatoi
.global xatoi .global xatoi
xatoi: xatoi:
_MOVW r1, r0, r23, r22 _MOVW r1, r0, r23, r22
_MOVW XH, XL, r25, r24 _MOVW XH, XL, r25, r24
ld ZL, X+ ld ZL, X+
ld ZH, X+ ld ZH, X+
clr r18 ;r21:r18 = 0; clr r18 ;r21:r18 = 0;
clr r19 ; clr r19 ;
clr r20 ; clr r20 ;
clr r21 ;/ clr r21 ;/
clt ;T = 0; clt ;T = 0;
ldi r25, 10 ;r25 = 10; ldi r25, 10 ;r25 = 10;
rjmp 41f ;/ rjmp 41f ;/
40: adiw ZL, 1 ;Z++; 40: adiw ZL, 1 ;Z++;
41: ld r22, Z ;r22 = *Z; 41: ld r22, Z ;r22 = *Z;
cpi r22, ' ' ;if(r22 == ' ') continue cpi r22, ' ' ;if(r22 == ' ') continue
breq 40b ;/ breq 40b ;/
brcs 70f ;if(r22 < ' ') error; brcs 70f ;if(r22 < ' ') error;
cpi r22, '-' ;if(r22 == '-') { cpi r22, '-' ;if(r22 == '-') {
brne 42f ; T = 1; brne 42f ; T = 1;
set ; continue; set ; continue;
rjmp 40b ;} rjmp 40b ;}
42: cpi r22, '9'+1 ;if(r22 > '9') error; 42: cpi r22, '9'+1 ;if(r22 > '9') error;
brcc 70f ;/ brcc 70f ;/
cpi r22, '0' ;if(r22 < '0') error; cpi r22, '0' ;if(r22 < '0') error;
brcs 70f ;/ brcs 70f ;/
brne 51f ;if(r22 > '0') cv_start; brne 51f ;if(r22 > '0') cv_start;
ldi r25, 8 ;r25 = 8; ldi r25, 8 ;r25 = 8;
adiw ZL, 1 ;r22 = *(++Z); adiw ZL, 1 ;r22 = *(++Z);
ld r22, Z ;/ ld r22, Z ;/
cpi r22, ' '+1 ;if(r22 <= ' ') exit; cpi r22, ' '+1 ;if(r22 <= ' ') exit;
brcs 80f ;/ brcs 80f ;/
cpi r22, 'b' ;if(r22 == 'b') { cpi r22, 'b' ;if(r22 == 'b') {
brne 43f ; r25 = 2; brne 43f ; r25 = 2;
ldi r25, 2 ; cv_start; ldi r25, 2 ; cv_start;
rjmp 50f ;} rjmp 50f ;}
43: cpi r22, 'x' ;if(r22 != 'x') error; 43: cpi r22, 'x' ;if(r22 != 'x') error;
brne 51f ;/ brne 51f ;/
ldi r25, 16 ;r25 = 16; ldi r25, 16 ;r25 = 16;
50: adiw ZL, 1 ;Z++; 50: adiw ZL, 1 ;Z++;
ld r22, Z ;r22 = *Z; ld r22, Z ;r22 = *Z;
51: cpi r22, ' '+1 ;if(r22 <= ' ') break; 51: cpi r22, ' '+1 ;if(r22 <= ' ') break;
brcs 80f ;/ brcs 80f ;/
cpi r22, 'a' ;if(r22 >= 'a') r22 =- 0x20; cpi r22, 'a' ;if(r22 >= 'a') r22 =- 0x20;
brcs 52f ; brcs 52f ;
subi r22, 0x20 ;/ subi r22, 0x20 ;/
52: subi r22, '0' ;if((r22 -= '0') < 0) error; 52: subi r22, '0' ;if((r22 -= '0') < 0) error;
brcs 70f ;/ brcs 70f ;/
cpi r22, 10 ;if(r22 >= 10) { cpi r22, 10 ;if(r22 >= 10) {
brcs 53f ; r22 -= 7; brcs 53f ; r22 -= 7;
subi r22, 7 ; if(r22 < 10) subi r22, 7 ; if(r22 < 10)
cpi r22, 10 ; cpi r22, 10 ;
brcs 70f ;} brcs 70f ;}
53: cp r22, r25 ;if(r22 >= r25) error; 53: cp r22, r25 ;if(r22 >= r25) error;
brcc 70f ;/ brcc 70f ;/
60: ldi r24, 33 ;r21:r18 *= r25; 60: ldi r24, 33 ;r21:r18 *= r25;
sub r23, r23 ; sub r23, r23 ;
61: brcc 62f ; 61: brcc 62f ;
add r23, r25 ; add r23, r25 ;
62: lsr r23 ; 62: lsr r23 ;
ror r21 ; ror r21 ;
ror r20 ; ror r20 ;
ror r19 ; ror r19 ;
ror r18 ; ror r18 ;
dec r24 ; dec r24 ;
brne 61b ;/ brne 61b ;/
add r18, r22 ;r21:r18 += r22; add r18, r22 ;r21:r18 += r22;
adc r19, r24 ; adc r19, r24 ;
adc r20, r24 ; adc r20, r24 ;
adc r21, r24 ;/ adc r21, r24 ;/
rjmp 50b ;repeat rjmp 50b ;repeat
70: ldi r24, 0 70: ldi r24, 0
rjmp 81f rjmp 81f
80: ldi r24, 1 80: ldi r24, 1
81: brtc 82f 81: brtc 82f
clr r22 clr r22
com r18 com r18
com r19 com r19
com r20 com r20
com r21 com r21
adc r18, r22 adc r18, r22
adc r19, r22 adc r19, r22
adc r20, r22 adc r20, r22
adc r21, r22 adc r21, r22
82: st -X, ZH 82: st -X, ZH
st -X, ZL st -X, ZL
_MOVW XH, XL, r1, r0 _MOVW XH, XL, r1, r0
st X+, r18 st X+, r18
st X+, r19 st X+, r19
st X+, r20 st X+, r20
st X+, r21 st X+, r21
clr r1 clr r1
ret ret
.endfunc .endfunc
#endif #endif

222
tmk_core/common/avr/xprintf.h
Unescape View File

@ -1,111 +1,111 @@
/*--------------------------------------------------------------------------- /*---------------------------------------------------------------------------
Extended itoa, puts and printf (C)ChaN, 2011 Extended itoa, puts and printf (C)ChaN, 2011
-----------------------------------------------------------------------------*/ -----------------------------------------------------------------------------*/
#ifndef XPRINTF_H #ifndef XPRINTF_H
#define XPRINTF_H #define XPRINTF_H
#include <inttypes.h> #include <inttypes.h>
#include <avr/pgmspace.h> #include <avr/pgmspace.h>
#ifdef __cplusplus #ifdef __cplusplus
extern "C" { extern "C" {
#endif #endif
extern void (*xfunc_out)(uint8_t); extern void (*xfunc_out)(uint8_t);
#define xdev_out(func) xfunc_out = (void(*)(uint8_t))(func) #define xdev_out(func) xfunc_out = (void(*)(uint8_t))(func)
/* This is a pointer to user defined output function. It must be initialized /* This is a pointer to user defined output function. It must be initialized
before using this modle. before using this modle.
*/ */
void xputc(char chr); void xputc(char chr);
/* This is a stub function to forward outputs to user defined output function. /* This is a stub function to forward outputs to user defined output function.
All outputs from this module are output via this function. All outputs from this module are output via this function.
*/ */
/*-----------------------------------------------------------------------------*/ /*-----------------------------------------------------------------------------*/
void xputs(const char *string_p); void xputs(const char *string_p);
/* The string placed in the ROM is forwarded to xputc() directly. /* The string placed in the ROM is forwarded to xputc() directly.
*/ */
/*-----------------------------------------------------------------------------*/ /*-----------------------------------------------------------------------------*/
void xitoa(long value, char radix, char width); void xitoa(long value, char radix, char width);
/* Extended itoa(). /* Extended itoa().
value radix width output value radix width output
100 10 6 " 100" 100 10 6 " 100"
100 10 -6 "000100" 100 10 -6 "000100"
100 10 0 "100" 100 10 0 "100"
4294967295 10 0 "4294967295" 4294967295 10 0 "4294967295"
4294967295 -10 0 "-1" 4294967295 -10 0 "-1"
655360 16 -8 "000A0000" 655360 16 -8 "000A0000"
1024 16 0 "400" 1024 16 0 "400"
0x55 2 -8 "01010101" 0x55 2 -8 "01010101"
*/ */
/*-----------------------------------------------------------------------------*/ /*-----------------------------------------------------------------------------*/
#define xprintf(format, ...) __xprintf(PSTR(format), ##__VA_ARGS__) #define xprintf(format, ...) __xprintf(PSTR(format), ##__VA_ARGS__)
#define xsprintf(str, format, ...) __xsprintf(str, PSTR(format), ##__VA_ARGS__) #define xsprintf(str, format, ...) __xsprintf(str, PSTR(format), ##__VA_ARGS__)
#define xfprintf(func, format, ...) __xfprintf(func, PSTR(format), ##__VA_ARGS__) #define xfprintf(func, format, ...) __xfprintf(func, PSTR(format), ##__VA_ARGS__)
void __xprintf(const char *format_p, ...); /* Send formatted string to the registered device */ void __xprintf(const char *format_p, ...); /* Send formatted string to the registered device */
void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */ void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */
void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */ void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */
/* Format string is placed in the ROM. The format flags is similar to printf(). /* Format string is placed in the ROM. The format flags is similar to printf().
%[flag][width][size]type %[flag][width][size]type
flag flag
A '0' means filled with '0' when output is shorter than width. A '0' means filled with '0' when output is shorter than width.
' ' is used in default. This is effective only numeral type. ' ' is used in default. This is effective only numeral type.
width width
Minimum width in decimal number. This is effective only numeral type. Minimum width in decimal number. This is effective only numeral type.
Default width is zero. Default width is zero.
size size
A 'l' means the argument is long(32bit). Default is short(16bit). A 'l' means the argument is long(32bit). Default is short(16bit).
This is effective only numeral type. This is effective only numeral type.
type type
'c' : Character, argument is the value 'c' : Character, argument is the value
's' : String placed on the RAM, argument is the pointer 's' : String placed on the RAM, argument is the pointer
'S' : String placed on the ROM, argument is the pointer 'S' : String placed on the ROM, argument is the pointer
'd' : Signed decimal, argument is the value 'd' : Signed decimal, argument is the value
'u' : Unsigned decimal, argument is the value 'u' : Unsigned decimal, argument is the value
'X' : Hexdecimal, argument is the value 'X' : Hexdecimal, argument is the value
'b' : Binary, argument is the value 'b' : Binary, argument is the value
'%' : '%' '%' : '%'
*/ */
/*-----------------------------------------------------------------------------*/ /*-----------------------------------------------------------------------------*/
char xatoi(char **str, long *ret); char xatoi(char **str, long *ret);
/* Get value of the numeral string. /* Get value of the numeral string.
str str
Pointer to pointer to source string Pointer to pointer to source string
"0b11001010" binary "0b11001010" binary
"0377" octal "0377" octal
"0xff800" hexdecimal "0xff800" hexdecimal
"1250000" decimal "1250000" decimal
"-25000" decimal "-25000" decimal
ret ret
Pointer to return value Pointer to return value
*/ */
#ifdef __cplusplus #ifdef __cplusplus
} }
#endif #endif
#endif #endif

312
tmk_core/protocol/iwrap/suart.S
Unescape View File

@ -1,156 +1,156 @@
;---------------------------------------------------------------------------; ;---------------------------------------------------------------------------;
; Software implemented UART module ; ; Software implemented UART module ;
; (C)ChaN, 2005 (http://elm-chan.org/) ; ; (C)ChaN, 2005 (http://elm-chan.org/) ;
;---------------------------------------------------------------------------; ;---------------------------------------------------------------------------;
; Bit rate settings: ; Bit rate settings:
; ;
; 1MHz 2MHz 4MHz 6MHz 8MHz 10MHz 12MHz 16MHz 20MHz ; 1MHz 2MHz 4MHz 6MHz 8MHz 10MHz 12MHz 16MHz 20MHz
; 2.4kbps 138 - - - - - - - - ; 2.4kbps 138 - - - - - - - -
; 4.8kbps 68 138 - - - - - - - ; 4.8kbps 68 138 - - - - - - -
; 9.6kbps 33 68 138 208 - - - - - ; 9.6kbps 33 68 138 208 - - - - -
; 19.2kbps - 33 68 102 138 173 208 - - ; 19.2kbps - 33 68 102 138 173 208 - -
; 38.4kbps - - 33 50 68 85 102 138 172 ; 38.4kbps - - 33 50 68 85 102 138 172
; 57.6kbps - - 21 33 44 56 68 91 114 ; 57.6kbps - - 21 33 44 56 68 91 114
; 115.2kbps - - - - 21 27 33 44 56 ; 115.2kbps - - - - 21 27 33 44 56
.nolist .nolist
#include <avr/io.h> #include <avr/io.h>
.list .list
#define BPS 102 /* Bit delay. (see above table) */ #define BPS 102 /* Bit delay. (see above table) */
#define BIDIR 0 /* 0:Separated Tx/Rx, 1:Shared Tx/Rx */ #define BIDIR 0 /* 0:Separated Tx/Rx, 1:Shared Tx/Rx */
#define OUT_1 sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 1 */ #define OUT_1 sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 1 */
#define OUT_0 cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 0 */ #define OUT_0 cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 0 */
#define SKIP_IN_1 sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 1 */ #define SKIP_IN_1 sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 1 */
#define SKIP_IN_0 sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 0 */ #define SKIP_IN_0 sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 0 */
#ifdef SPM_PAGESIZE #ifdef SPM_PAGESIZE
.macro _LPMI reg .macro _LPMI reg
lpm \reg, Z+ lpm \reg, Z+
.endm .endm
.macro _MOVW dh,dl, sh,sl .macro _MOVW dh,dl, sh,sl
movw \dl, \sl movw \dl, \sl
.endm .endm
#else #else
.macro _LPMI reg .macro _LPMI reg
lpm lpm
mov \reg, r0 mov \reg, r0
adiw ZL, 1 adiw ZL, 1
.endm .endm
.macro _MOVW dh,dl, sh,sl .macro _MOVW dh,dl, sh,sl
mov \dl, \sl mov \dl, \sl
mov \dh, \sh mov \dh, \sh
.endm .endm
#endif #endif
;---------------------------------------------------------------------------; ;---------------------------------------------------------------------------;
; Transmit a byte in serial format of N81 ; Transmit a byte in serial format of N81
; ;
;Prototype: void xmit (uint8_t data); ;Prototype: void xmit (uint8_t data);
;Size: 16 words ;Size: 16 words
.global xmit .global xmit
.func xmit .func xmit
xmit: xmit:
#if BIDIR #if BIDIR
ldi r23, BPS-1 ;Pre-idle time for bidirectional data line ldi r23, BPS-1 ;Pre-idle time for bidirectional data line
5: dec r23 ; 5: dec r23 ;
brne 5b ;/ brne 5b ;/
#endif #endif
in r0, _SFR_IO_ADDR(SREG) ;Save flags in r0, _SFR_IO_ADDR(SREG) ;Save flags
com r24 ;C = start bit com r24 ;C = start bit
ldi r25, 10 ;Bit counter ldi r25, 10 ;Bit counter
cli ;Start critical section cli ;Start critical section
1: ldi r23, BPS-1 ;----- Bit transferring loop 1: ldi r23, BPS-1 ;----- Bit transferring loop
2: dec r23 ;Wait for a bit time 2: dec r23 ;Wait for a bit time
brne 2b ;/ brne 2b ;/
brcs 3f ;MISO = bit to be sent brcs 3f ;MISO = bit to be sent
OUT_1 ; OUT_1 ;
3: brcc 4f ; 3: brcc 4f ;
OUT_0 ;/ OUT_0 ;/
4: lsr r24 ;Get next bit into C 4: lsr r24 ;Get next bit into C
dec r25 ;All bits sent? dec r25 ;All bits sent?
brne 1b ; no, coutinue brne 1b ; no, coutinue
out _SFR_IO_ADDR(SREG), r0 ;End of critical section out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret ret
.endfunc .endfunc
;---------------------------------------------------------------------------; ;---------------------------------------------------------------------------;
; Receive a byte ; Receive a byte
; ;
;Prototype: uint8_t rcvr (void); ;Prototype: uint8_t rcvr (void);
;Size: 19 words ;Size: 19 words
.global rcvr .global rcvr
.func rcvr .func rcvr
rcvr: rcvr:
in r0, _SFR_IO_ADDR(SREG) ;Save flags in r0, _SFR_IO_ADDR(SREG) ;Save flags
ldi r24, 0x80 ;Receiving shift reg ldi r24, 0x80 ;Receiving shift reg
cli ;Start critical section cli ;Start critical section
1: SKIP_IN_1 ;Wait for idle 1: SKIP_IN_1 ;Wait for idle
rjmp 1b rjmp 1b
2: SKIP_IN_0 ;Wait for start bit 2: SKIP_IN_0 ;Wait for start bit
rjmp 2b rjmp 2b
ldi r25, BPS/2 ;Wait for half bit time ldi r25, BPS/2 ;Wait for half bit time
3: dec r25 3: dec r25
brne 3b brne 3b
4: ldi r25, BPS ;----- Bit receiving loop 4: ldi r25, BPS ;----- Bit receiving loop
5: dec r25 ;Wait for a bit time 5: dec r25 ;Wait for a bit time
brne 5b ;/ brne 5b ;/
lsr r24 ;Next bit lsr r24 ;Next bit
SKIP_IN_0 ;Get a data bit into r24.7 SKIP_IN_0 ;Get a data bit into r24.7
ori r24, 0x80 ori r24, 0x80
brcc 4b ;All bits received? no, continue brcc 4b ;All bits received? no, continue
out _SFR_IO_ADDR(SREG), r0 ;End of critical section out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret ret
.endfunc .endfunc
; Not wait for start bit. This should be called after detecting start bit. ; Not wait for start bit. This should be called after detecting start bit.
.global recv .global recv
.func recv .func recv
recv: recv:
in r0, _SFR_IO_ADDR(SREG) ;Save flags in r0, _SFR_IO_ADDR(SREG) ;Save flags
ldi r24, 0x80 ;Receiving shift reg ldi r24, 0x80 ;Receiving shift reg
cli ;Start critical section cli ;Start critical section
;1: SKIP_IN_1 ;Wait for idle ;1: SKIP_IN_1 ;Wait for idle
; rjmp 1b ; rjmp 1b
;2: SKIP_IN_0 ;Wait for start bit ;2: SKIP_IN_0 ;Wait for start bit
; rjmp 2b ; rjmp 2b
ldi r25, BPS/2 ;Wait for half bit time ldi r25, BPS/2 ;Wait for half bit time
3: dec r25 3: dec r25
brne 3b brne 3b
4: ldi r25, BPS ;----- Bit receiving loop 4: ldi r25, BPS ;----- Bit receiving loop
5: dec r25 ;Wait for a bit time 5: dec r25 ;Wait for a bit time
brne 5b ;/ brne 5b ;/
lsr r24 ;Next bit lsr r24 ;Next bit
SKIP_IN_0 ;Get a data bit into r24.7 SKIP_IN_0 ;Get a data bit into r24.7
ori r24, 0x80 ori r24, 0x80
brcc 4b ;All bits received? no, continue brcc 4b ;All bits received? no, continue
ldi r25, BPS/2 ;Wait for half bit time ldi r25, BPS/2 ;Wait for half bit time
6: dec r25 6: dec r25
brne 6b brne 6b
7: SKIP_IN_1 ;Wait for stop bit 7: SKIP_IN_1 ;Wait for stop bit
rjmp 7b rjmp 7b
out _SFR_IO_ADDR(SREG), r0 ;End of critical section out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret ret
.endfunc .endfunc

16
tmk_core/protocol/iwrap/suart.h
Unescape View File

@ -1,8 +1,8 @@
#ifndef SUART #ifndef SUART
#define SUART #define SUART
void xmit(uint8_t); void xmit(uint8_t);
uint8_t rcvr(void); uint8_t rcvr(void);
uint8_t recv(void); uint8_t recv(void);
#endif /* SUART */ #endif /* SUART */

318
tmk_core/protocol/iwrap/wd.h
Unescape View File

@ -1,159 +1,159 @@
/* This is from http://www.mtcnet.net/~henryvm/wdt/ */ /* This is from http://www.mtcnet.net/~henryvm/wdt/ */
#ifndef _AVR_WD_H_ #ifndef _AVR_WD_H_
#define _AVR_WD_H_ #define _AVR_WD_H_
#include <avr/io.h> #include <avr/io.h>
/* /*
Copyright (c) 2009, Curt Van Maanen Copyright (c) 2009, Curt Van Maanen
Permission to use, copy, modify, and/or distribute this software for any Permission to use, copy, modify, and/or distribute this software for any
purpose with or without fee is hereby granted, provided that the above purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies. copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
include usage- include usage-
#include "wd.h" //if in same directory as project #include "wd.h" //if in same directory as project
#include <avr/wd.h> //if wd.h is in avr directory #include <avr/wd.h> //if wd.h is in avr directory
set watchdog modes and prescale set watchdog modes and prescale
usage- usage-
WD_SET(mode,[timeout]); //prescale always set WD_SET(mode,[timeout]); //prescale always set
modes- modes-
WD_OFF disabled WD_OFF disabled
WD_RST normal reset mode WD_RST normal reset mode
WD_IRQ interrupt only mode (if supported) WD_IRQ interrupt only mode (if supported)
WD_RST_IRQ interrupt+reset mode (if supported) WD_RST_IRQ interrupt+reset mode (if supported)
timeout- timeout-
WDTO_15MS default if no timeout provided WDTO_15MS default if no timeout provided
WDTO_30MS WDTO_30MS
WDTO_60MS WDTO_60MS
WDTO_120MS WDTO_120MS
WDTO_250MS WDTO_250MS
WDTO_500MS WDTO_500MS
WDTO_1S WDTO_1S
WDTO_2S WDTO_2S
WDTO_4S (if supported) WDTO_4S (if supported)
WDTO_8S (if supported) WDTO_8S (if supported)
examples- examples-
WD_SET(WD_RST,WDTO_1S); //reset mode, 1s timeout WD_SET(WD_RST,WDTO_1S); //reset mode, 1s timeout
WD_SET(WD_OFF); //watchdog disabled (if not fused on) WD_SET(WD_OFF); //watchdog disabled (if not fused on)
WD_SET(WD_RST); //reset mode, 15ms (default timeout) WD_SET(WD_RST); //reset mode, 15ms (default timeout)
WD_SET(WD_IRQ,WDTO_120MS); //interrupt only mode, 120ms timeout WD_SET(WD_IRQ,WDTO_120MS); //interrupt only mode, 120ms timeout
WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout
for enhanced watchdogs, if the watchdog is not being used WDRF should be for enhanced watchdogs, if the watchdog is not being used WDRF should be
cleared on every power up or reset, along with disabling the watchdog- cleared on every power up or reset, along with disabling the watchdog-
WD_DISABLE(); //clear WDRF, then turn off watchdog WD_DISABLE(); //clear WDRF, then turn off watchdog
*/ */
//reset registers to the same name (MCUCSR) //reset registers to the same name (MCUCSR)
#if !defined(MCUCSR) #if !defined(MCUCSR)
#define MCUCSR MCUSR #define MCUCSR MCUSR
#endif #endif
//watchdog registers to the same name (WDTCSR) //watchdog registers to the same name (WDTCSR)
#if !defined(WDTCSR) #if !defined(WDTCSR)
#define WDTCSR WDTCR #define WDTCSR WDTCR
#endif #endif
//if enhanced watchdog, define irq values, create disable macro //if enhanced watchdog, define irq values, create disable macro
#if defined(WDIF) #if defined(WDIF)
#define WD_IRQ 0xC0 #define WD_IRQ 0xC0
#define WD_RST_IRQ 0xC8 #define WD_RST_IRQ 0xC8
#define WD_DISABLE() do{ \ #define WD_DISABLE() do{ \
MCUCSR &= ~(1<<WDRF); \ MCUCSR &= ~(1<<WDRF); \
WD_SET(WD_OFF); \ WD_SET(WD_OFF); \
}while(0) }while(0)
#endif #endif
//all watchdogs //all watchdogs
#define WD_RST 8 #define WD_RST 8
#define WD_OFF 0 #define WD_OFF 0
//prescale values //prescale values
#define WDTO_15MS 0 #define WDTO_15MS 0
#define WDTO_30MS 1 #define WDTO_30MS 1
#define WDTO_60MS 2 #define WDTO_60MS 2
#define WDTO_120MS 3 #define WDTO_120MS 3
#define WDTO_250MS 4 #define WDTO_250MS 4
#define WDTO_500MS 5 #define WDTO_500MS 5
#define WDTO_1S 6 #define WDTO_1S 6
#define WDTO_2S 7 #define WDTO_2S 7
//prescale values for avrs with WDP3 //prescale values for avrs with WDP3
#if defined(WDP3) #if defined(WDP3)
#define WDTO_4S 0x20 #define WDTO_4S 0x20
#define WDTO_8S 0x21 #define WDTO_8S 0x21
#endif #endif
//watchdog reset //watchdog reset
#define WDR() __asm__ __volatile__("wdr") #define WDR() __asm__ __volatile__("wdr")
//avr reset using watchdog //avr reset using watchdog
#define WD_AVR_RESET() do{ \ #define WD_AVR_RESET() do{ \
__asm__ __volatile__("cli"); \ __asm__ __volatile__("cli"); \
WD_SET_UNSAFE(WD_RST); \ WD_SET_UNSAFE(WD_RST); \
while(1); \ while(1); \
}while(0) }while(0)
/*set the watchdog- /*set the watchdog-
1. save SREG 1. save SREG
2. turn off irq's 2. turn off irq's
3. reset watchdog timer 3. reset watchdog timer
4. enable watchdog change 4. enable watchdog change
5. write watchdog value 5. write watchdog value
6. restore SREG (restoring irq status) 6. restore SREG (restoring irq status)
*/ */
#define WD_SET(val,...) \ #define WD_SET(val,...) \
__asm__ __volatile__( \ __asm__ __volatile__( \
"in __tmp_reg__,__SREG__" "\n\t" \ "in __tmp_reg__,__SREG__" "\n\t" \
"cli" "\n\t" \ "cli" "\n\t" \
"wdr" "\n\t" \ "wdr" "\n\t" \
"sts %[wdreg],%[wden]" "\n\t" \ "sts %[wdreg],%[wden]" "\n\t" \
"sts %[wdreg],%[wdval]" "\n\t" \ "sts %[wdreg],%[wdval]" "\n\t" \
"out __SREG__,__tmp_reg__" "\n\t" \ "out __SREG__,__tmp_reg__" "\n\t" \
: \ : \
: [wdreg] "M" (&WDTCSR), \ : [wdreg] "M" (&WDTCSR), \
[wden] "r" ((uint8_t)(0x18)), \ [wden] "r" ((uint8_t)(0x18)), \
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \ [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
: "r0" \ : "r0" \
) )
/*set the watchdog when I bit in SREG known to be clear- /*set the watchdog when I bit in SREG known to be clear-
1. reset watchdog timer 1. reset watchdog timer
2. enable watchdog change 2. enable watchdog change
5. write watchdog value 5. write watchdog value
*/ */
#define WD_SET_UNSAFE(val,...) \ #define WD_SET_UNSAFE(val,...) \
__asm__ __volatile__( \ __asm__ __volatile__( \
"wdr" "\n\t" \ "wdr" "\n\t" \
"sts %[wdreg],%[wden]" "\n\t" \ "sts %[wdreg],%[wden]" "\n\t" \
"sts %[wdreg],%[wdval]" "\n\t" \ "sts %[wdreg],%[wdval]" "\n\t" \
: \ : \
: [wdreg] "M" (&WDTCSR), \ : [wdreg] "M" (&WDTCSR), \
[wden] "r" ((uint8_t)(0x18)), \ [wden] "r" ((uint8_t)(0x18)), \
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \ [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
) )
//for compatibility with avr/wdt.h //for compatibility with avr/wdt.h
#define wdt_enable(val) WD_SET(WD_RST,val) #define wdt_enable(val) WD_SET(WD_RST,val)
#define wdt_disable() WD_SET(WD_OFF) #define wdt_disable() WD_SET(WD_OFF)
#endif /* _AVR_WD_H_ */ #endif /* _AVR_WD_H_ */

322
tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
Unescape View File

@ -1,161 +1,161 @@
<asf xmlversion="1.0"> <asf xmlversion="1.0">
<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_"> <project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
<require idref="lufa.bootloaders.cdc"/> <require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb1287"/> <device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_"> <project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
<require idref="lufa.bootloaders.cdc"/> <require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb647"/> <device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_"> <project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
<require idref="lufa.bootloaders.cdc"/> <require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega32u4"/> <device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_"> <project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
<require idref="lufa.bootloaders.cdc"/> <require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega16u2"/> <device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_"> <project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
<require idref="lufa.bootloaders.cdc"/> <require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega8u2"/> <device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader"> <module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
<info type="description" value="summary"> <info type="description" value="summary">
CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host. CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
</info> </info>
<info type="gui-flag" value="move-to-root"/> <info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology"> <info type="keyword" value="Technology">
<keyword value="Bootloaders"/> <keyword value="Bootloaders"/>
<keyword value="USB Device"/> <keyword value="USB Device"/>
</info> </info>
<device-support-alias value="lufa_avr8"/> <device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/> <device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/> <device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/> <build type="include-path" value="."/>
<build type="c-source" value="BootloaderCDC.c"/> <build type="c-source" value="BootloaderCDC.c"/>
<build type="header-file" value="BootloaderCDC.h"/> <build type="header-file" value="BootloaderCDC.h"/>
<build type="c-source" value="Descriptors.c"/> <build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/> <build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/> <build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/> <build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/> <build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/> <build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/> <build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/> <build type="header-file" value="Config/AppConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/> <build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/> <build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/> <build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
<require idref="lufa.common"/> <require idref="lufa.common"/>
<require idref="lufa.platform"/> <require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/> <require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/> <require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/> <require idref="lufa.drivers.board.leds"/>
</module> </module>
</asf> </asf>

312
tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
Unescape View File

@ -1,156 +1,156 @@
<asf xmlversion="1.0"> <asf xmlversion="1.0">
<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_"> <project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
<require idref="lufa.bootloaders.dfu"/> <require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb1287"/> <device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_"> <project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
<require idref="lufa.bootloaders.dfu"/> <require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb647"/> <device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_"> <project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
<require idref="lufa.bootloaders.dfu"/> <require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega32u4"/> <device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_"> <project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
<require idref="lufa.bootloaders.dfu"/> <require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega16u2"/> <device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_"> <project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
<require idref="lufa.bootloaders.dfu"/> <require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega8u2"/> <device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader"> <module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
<info type="description" value="summary"> <info type="description" value="summary">
DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host. DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
</info> </info>
<info type="gui-flag" value="move-to-root"/> <info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology"> <info type="keyword" value="Technology">
<keyword value="Bootloaders"/> <keyword value="Bootloaders"/>
<keyword value="USB Device"/> <keyword value="USB Device"/>
</info> </info>
<device-support-alias value="lufa_avr8"/> <device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/> <device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/> <device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/> <build type="include-path" value="."/>
<build type="c-source" value="BootloaderDFU.c"/> <build type="c-source" value="BootloaderDFU.c"/>
<build type="header-file" value="BootloaderDFU.h"/> <build type="header-file" value="BootloaderDFU.h"/>
<build type="c-source" value="Descriptors.c"/> <build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/> <build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/> <build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/> <build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/> <build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/> <build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/> <build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/> <build type="header-file" value="Config/AppConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/> <build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/> <build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
<require idref="lufa.common"/> <require idref="lufa.common"/>
<require idref="lufa.platform"/> <require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/> <require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/> <require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/> <require idref="lufa.drivers.board.leds"/>
</module> </module>
</asf> </asf>

246
tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
Unescape View File

@ -1,123 +1,123 @@
<asf xmlversion="1.0"> <asf xmlversion="1.0">
<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_"> <project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
<require idref="lufa.bootloaders.hid"/> <require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb1287"/> <device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
</project> </project>
<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_"> <project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
<require idref="lufa.bootloaders.hid"/> <require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb647"/> <device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
</project> </project>
<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_"> <project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
<require idref="lufa.bootloaders.hid"/> <require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega32u4"/> <device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
</project> </project>
<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_"> <project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
<require idref="lufa.bootloaders.hid"/> <require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega16u2"/> <device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3800"/> <build type="define" name="BOOT_START_ADDR" value="0x3800"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
</project> </project>
<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_"> <project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
<require idref="lufa.bootloaders.hid"/> <require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega8u2"/> <device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1800"/> <build type="define" name="BOOT_START_ADDR" value="0x1800"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
</project> </project>
<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader"> <module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
<info type="description" value="summary"> <info type="description" value="summary">
HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host. HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
</info> </info>
<info type="gui-flag" value="move-to-root"/> <info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology"> <info type="keyword" value="Technology">
<keyword value="Bootloaders"/> <keyword value="Bootloaders"/>
<keyword value="USB Device"/> <keyword value="USB Device"/>
</info> </info>
<device-support-alias value="lufa_avr8"/> <device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/> <device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/> <device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/> <build type="include-path" value="."/>
<build type="c-source" value="BootloaderHID.c"/> <build type="c-source" value="BootloaderHID.c"/>
<build type="header-file" value="BootloaderHID.h"/> <build type="header-file" value="BootloaderHID.h"/>
<build type="c-source" value="Descriptors.c"/> <build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/> <build type="header-file" value="Descriptors.h"/>
<build type="module-config" subtype="path" value="Config"/> <build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/> <build type="header-file" value="Config/LUFAConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/> <build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/> <build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
<build type="distribute" subtype="directory" value="HostLoaderApp"/> <build type="distribute" subtype="directory" value="HostLoaderApp"/>
<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/> <build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
<require idref="lufa.common"/> <require idref="lufa.common"/>
<require idref="lufa.platform"/> <require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/> <require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/> <require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/> <require idref="lufa.drivers.board.leds"/>
</module> </module>
</asf> </asf>

204
tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
Unescape View File

@ -1,102 +1,102 @@
/* /*
LUFA Library LUFA Library
Copyright (C) Dean Camera, 2014. Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org www.lufa-lib.org
*/ */
/* /*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the advertising or publicity pertaining to distribution of the
software without specific, written prior permission. software without specific, written prior permission.
The author disclaims all warranties with regard to this The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action, in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of arising out of or in connection with the use or performance of
this software. this software.
*/ */
#if AUX_BOOT_SECTION_SIZE > 0 #if AUX_BOOT_SECTION_SIZE > 0
#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation). #warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
; Trampoline to jump over the AUX bootloader section to the start of the bootloader, ; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
; on devices where an AUX bootloader section is used. ; on devices where an AUX bootloader section is used.
.section .boot_aux_trampoline, "ax" .section .boot_aux_trampoline, "ax"
.global Boot_AUX_Trampoline .global Boot_AUX_Trampoline
Boot_AUX_Trampoline: Boot_AUX_Trampoline:
jmp BOOT_START_ADDR jmp BOOT_START_ADDR
#endif #endif
; Trampolines to actual API implementations if the target address is outside the ; Trampolines to actual API implementations if the target address is outside the
; range of a rjmp instruction (can happen with large bootloader sections) ; range of a rjmp instruction (can happen with large bootloader sections)
.section .apitable_trampolines, "ax" .section .apitable_trampolines, "ax"
.global BootloaderAPI_Trampolines .global BootloaderAPI_Trampolines
BootloaderAPI_Trampolines: BootloaderAPI_Trampolines:
BootloaderAPI_ErasePage_Trampoline: BootloaderAPI_ErasePage_Trampoline:
jmp BootloaderAPI_ErasePage jmp BootloaderAPI_ErasePage
BootloaderAPI_WritePage_Trampoline: BootloaderAPI_WritePage_Trampoline:
jmp BootloaderAPI_WritePage jmp BootloaderAPI_WritePage
BootloaderAPI_FillWord_Trampoline: BootloaderAPI_FillWord_Trampoline:
jmp BootloaderAPI_FillWord jmp BootloaderAPI_FillWord
BootloaderAPI_ReadSignature_Trampoline: BootloaderAPI_ReadSignature_Trampoline:
jmp BootloaderAPI_ReadSignature jmp BootloaderAPI_ReadSignature
BootloaderAPI_ReadFuse_Trampoline: BootloaderAPI_ReadFuse_Trampoline:
jmp BootloaderAPI_ReadFuse jmp BootloaderAPI_ReadFuse
BootloaderAPI_ReadLock_Trampoline: BootloaderAPI_ReadLock_Trampoline:
jmp BootloaderAPI_ReadLock jmp BootloaderAPI_ReadLock
BootloaderAPI_WriteLock_Trampoline: BootloaderAPI_WriteLock_Trampoline:
jmp BootloaderAPI_WriteLock jmp BootloaderAPI_WriteLock
BootloaderAPI_UNUSED1: BootloaderAPI_UNUSED1:
ret ret
BootloaderAPI_UNUSED2: BootloaderAPI_UNUSED2:
ret ret
BootloaderAPI_UNUSED3: BootloaderAPI_UNUSED3:
ret ret
BootloaderAPI_UNUSED4: BootloaderAPI_UNUSED4:
ret ret
BootloaderAPI_UNUSED5: BootloaderAPI_UNUSED5:
ret ret
; API function jump table ; API function jump table
.section .apitable_jumptable, "ax" .section .apitable_jumptable, "ax"
.global BootloaderAPI_JumpTable .global BootloaderAPI_JumpTable
BootloaderAPI_JumpTable: BootloaderAPI_JumpTable:
rjmp BootloaderAPI_ErasePage_Trampoline rjmp BootloaderAPI_ErasePage_Trampoline
rjmp BootloaderAPI_WritePage_Trampoline rjmp BootloaderAPI_WritePage_Trampoline
rjmp BootloaderAPI_FillWord_Trampoline rjmp BootloaderAPI_FillWord_Trampoline
rjmp BootloaderAPI_ReadSignature_Trampoline rjmp BootloaderAPI_ReadSignature_Trampoline
rjmp BootloaderAPI_ReadFuse_Trampoline rjmp BootloaderAPI_ReadFuse_Trampoline
rjmp BootloaderAPI_ReadLock_Trampoline rjmp BootloaderAPI_ReadLock_Trampoline
rjmp BootloaderAPI_WriteLock_Trampoline rjmp BootloaderAPI_WriteLock_Trampoline
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1 rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2 rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3 rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4 rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5 rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
; Bootloader table signatures and information ; Bootloader table signatures and information
.section .apitable_signatures, "ax" .section .apitable_signatures, "ax"
.global BootloaderAPI_Signatures .global BootloaderAPI_Signatures
BootloaderAPI_Signatures: BootloaderAPI_Signatures:
.long BOOT_START_ADDR ; Start address of the bootloader .long BOOT_START_ADDR ; Start address of the bootloader
.word 0xDF30 ; Signature for the MS class bootloader, V1 .word 0xDF30 ; Signature for the MS class bootloader, V1
.word 0xDCFB ; Signature for a LUFA class bootloader .word 0xDCFB ; Signature for a LUFA class bootloader

312
tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
Unescape View File

@ -1,156 +1,156 @@
<asf xmlversion="1.0"> <asf xmlversion="1.0">
<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_"> <project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
<require idref="lufa.bootloaders.mass_storage"/> <require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb1287"/> <device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1E000"/> <build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/> <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_"> <project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
<require idref="lufa.bootloaders.mass_storage"/> <require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb647"/> <device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xE000"/> <build type="define" name="BOOT_START_ADDR" value="0xE000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/> <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_"> <project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
<require idref="lufa.bootloaders.mass_storage"/> <require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega32u4"/> <device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/> <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/> <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/> <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/> <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_"> <project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
<require idref="lufa.bootloaders.mass_storage"/> <require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega16u2"/> <device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/> <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/> <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/> <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/> <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader"> <module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
<info type="description" value="summary"> <info type="description" value="summary">
Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host. Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
</info> </info>
<info type="gui-flag" value="move-to-root"/> <info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology"> <info type="keyword" value="Technology">
<keyword value="Bootloaders"/> <keyword value="Bootloaders"/>
<keyword value="USB Device"/> <keyword value="USB Device"/>
</info> </info>
<device-support-alias value="lufa_avr8"/> <device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/> <device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/> <device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/> <build type="include-path" value="."/>
<build type="c-source" value="BootloaderMassStorage.c"/> <build type="c-source" value="BootloaderMassStorage.c"/>
<build type="header-file" value="BootloaderMassStorage.h"/> <build type="header-file" value="BootloaderMassStorage.h"/>
<build type="c-source" value="Descriptors.c"/> <build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/> <build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/> <build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/> <build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/> <build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/> <build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/> <build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/> <build type="header-file" value="Config/AppConfig.h"/>
<build type="include-path" value="Lib"/> <build type="include-path" value="Lib"/>
<build type="header-file" value="Lib/VirtualFAT.h"/> <build type="header-file" value="Lib/VirtualFAT.h"/>
<build type="c-source" value="Lib/VirtualFAT.c"/> <build type="c-source" value="Lib/VirtualFAT.c"/>
<build type="header-file" value="Lib/SCSI.h"/> <build type="header-file" value="Lib/SCSI.h"/>
<build type="c-source" value="Lib/SCSI.c"/> <build type="c-source" value="Lib/SCSI.c"/>
<build type="distribute" subtype="user-file" value="doxyfile"/> <build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/> <build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
<require idref="lufa.common"/> <require idref="lufa.common"/>
<require idref="lufa.platform"/> <require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/> <require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/> <require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/> <require idref="lufa.drivers.board.leds"/>
</module> </module>
</asf> </asf>

136
tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
Unescape View File

@ -1,68 +1,68 @@
# #
# LUFA Library # LUFA Library
# Copyright (C) Dean Camera, 2014. # Copyright (C) Dean Camera, 2014.
# #
# dean [at] fourwalledcubicle [dot] com # dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org # www.lufa-lib.org
# #
# -------------------------------------- # --------------------------------------
# LUFA Project Makefile. # LUFA Project Makefile.
# -------------------------------------- # --------------------------------------
# Run "make help" for target help. # Run "make help" for target help.
MCU = at90usb1287 MCU = at90usb1287
ARCH = AVR8 ARCH = AVR8
BOARD = USBKEY BOARD = USBKEY
F_CPU = 8000000 F_CPU = 8000000
F_USB = $(F_CPU) F_USB = $(F_CPU)
OPTIMIZATION = s OPTIMIZATION = s
TARGET = BootloaderMassStorage TARGET = BootloaderMassStorage
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
LUFA_PATH = ../../LUFA LUFA_PATH = ../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET) CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS) LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
# Flash size and bootloader section sizes of the target, in KB. These must # Flash size and bootloader section sizes of the target, in KB. These must
# match the target's total FLASH size and the bootloader size set in the # match the target's total FLASH size and the bootloader size set in the
# device's fuses. # device's fuses.
FLASH_SIZE_KB = 128 FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 8 BOOT_SECTION_SIZE_KB = 8
# Bootloader address calculation formulas # Bootloader address calculation formulas
# Do not modify these macros, but rather modify the dependent values above. # Do not modify these macros, but rather modify the dependent values above.
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) ) CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 ) BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) ) BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
# Bootloader linker section flags for relocating the API table sections to # Bootloader linker section flags for relocating the API table sections to
# known FLASH addresses - these should not normally be user-edited. # known FLASH addresses - these should not normally be user-edited.
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2)) BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96) BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32) BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8) BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the # Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum # bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices. # bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
ifeq ($(BOOT_SECTION_SIZE_KB),8) ifeq ($(BOOT_SECTION_SIZE_KB),8)
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0 CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0
else else
AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB)) AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)' CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16)) LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024) LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
endif endif
# Default target # Default target
all: all:
# Include LUFA build script makefiles # Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk include $(LUFA_PATH)/Build/lufa_atprogram.mk

182
tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
Unescape View File

@ -1,91 +1,91 @@
/* /*
LUFA Library LUFA Library
Copyright (C) Dean Camera, 2014. Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org www.lufa-lib.org
*/ */
/* /*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the advertising or publicity pertaining to distribution of the
software without specific, written prior permission. software without specific, written prior permission.
The author disclaims all warranties with regard to this The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action, in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of arising out of or in connection with the use or performance of
this software. this software.
*/ */
; Trampolines to actual API implementations if the target address is outside the ; Trampolines to actual API implementations if the target address is outside the
; range of a rjmp instruction (can happen with large bootloader sections) ; range of a rjmp instruction (can happen with large bootloader sections)
.section .apitable_trampolines, "ax" .section .apitable_trampolines, "ax"
.global BootloaderAPI_Trampolines .global BootloaderAPI_Trampolines
BootloaderAPI_Trampolines: BootloaderAPI_Trampolines:
BootloaderAPI_ErasePage_Trampoline: BootloaderAPI_ErasePage_Trampoline:
jmp BootloaderAPI_ErasePage jmp BootloaderAPI_ErasePage
BootloaderAPI_WritePage_Trampoline: BootloaderAPI_WritePage_Trampoline:
jmp BootloaderAPI_WritePage jmp BootloaderAPI_WritePage
BootloaderAPI_FillWord_Trampoline: BootloaderAPI_FillWord_Trampoline:
jmp BootloaderAPI_FillWord jmp BootloaderAPI_FillWord
BootloaderAPI_ReadSignature_Trampoline: BootloaderAPI_ReadSignature_Trampoline:
jmp BootloaderAPI_ReadSignature jmp BootloaderAPI_ReadSignature
BootloaderAPI_ReadFuse_Trampoline: BootloaderAPI_ReadFuse_Trampoline:
jmp BootloaderAPI_ReadFuse jmp BootloaderAPI_ReadFuse
BootloaderAPI_ReadLock_Trampoline: BootloaderAPI_ReadLock_Trampoline:
jmp BootloaderAPI_ReadLock jmp BootloaderAPI_ReadLock
BootloaderAPI_WriteLock_Trampoline: BootloaderAPI_WriteLock_Trampoline:
jmp BootloaderAPI_WriteLock jmp BootloaderAPI_WriteLock
BootloaderAPI_UNUSED1: BootloaderAPI_UNUSED1:
ret ret
BootloaderAPI_UNUSED2: BootloaderAPI_UNUSED2:
ret ret
BootloaderAPI_UNUSED3: BootloaderAPI_UNUSED3:
ret ret
BootloaderAPI_UNUSED4: BootloaderAPI_UNUSED4:
ret ret
BootloaderAPI_UNUSED5: BootloaderAPI_UNUSED5:
ret ret
; API function jump table ; API function jump table
.section .apitable_jumptable, "ax" .section .apitable_jumptable, "ax"
.global BootloaderAPI_JumpTable .global BootloaderAPI_JumpTable
BootloaderAPI_JumpTable: BootloaderAPI_JumpTable:
rjmp BootloaderAPI_ErasePage_Trampoline rjmp BootloaderAPI_ErasePage_Trampoline
rjmp BootloaderAPI_WritePage_Trampoline rjmp BootloaderAPI_WritePage_Trampoline
rjmp BootloaderAPI_FillWord_Trampoline rjmp BootloaderAPI_FillWord_Trampoline
rjmp BootloaderAPI_ReadSignature_Trampoline rjmp BootloaderAPI_ReadSignature_Trampoline
rjmp BootloaderAPI_ReadFuse_Trampoline rjmp BootloaderAPI_ReadFuse_Trampoline
rjmp BootloaderAPI_ReadLock_Trampoline rjmp BootloaderAPI_ReadLock_Trampoline
rjmp BootloaderAPI_WriteLock_Trampoline rjmp BootloaderAPI_WriteLock_Trampoline
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1 rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2 rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3 rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4 rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5 rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
; Bootloader table signatures and information ; Bootloader table signatures and information
.section .apitable_signatures, "ax" .section .apitable_signatures, "ax"
.global BootloaderAPI_Signatures .global BootloaderAPI_Signatures
BootloaderAPI_Signatures: BootloaderAPI_Signatures:
.long BOOT_START_ADDR ; Start address of the bootloader .long BOOT_START_ADDR ; Start address of the bootloader
.word 0xDF20 ; Signature for the Printer class bootloader .word 0xDF20 ; Signature for the Printer class bootloader
.word 0xDCFB ; Signature for a LUFA class bootloader .word 0xDCFB ; Signature for a LUFA class bootloader

318
tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
Unescape View File

@ -1,159 +1,159 @@
<asf xmlversion="1.0"> <asf xmlversion="1.0">
<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_"> <project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
<require idref="lufa.bootloaders.printer"/> <require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb1287"/> <device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_"> <project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
<require idref="lufa.bootloaders.printer"/> <require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="at90usb647"/> <device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_"> <project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
<require idref="lufa.bootloaders.printer"/> <require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega32u4"/> <device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_"> <project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
<require idref="lufa.bootloaders.printer"/> <require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega16u2"/> <device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_"> <project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
<require idref="lufa.bootloaders.printer"/> <require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/> <generator value="as5_8"/>
<device-support value="atmega8u2"/> <device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/> <config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/> <config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/> <build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/> <build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project> </project>
<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader"> <module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
<info type="description" value="summary"> <info type="description" value="summary">
Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host. Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
</info> </info>
<info type="gui-flag" value="move-to-root"/> <info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology"> <info type="keyword" value="Technology">
<keyword value="Bootloaders"/> <keyword value="Bootloaders"/>
<keyword value="USB Device"/> <keyword value="USB Device"/>
</info> </info>
<device-support-alias value="lufa_avr8"/> <device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/> <device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/> <device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/> <build type="include-path" value="."/>
<build type="c-source" value="BootloaderPrinter.c"/> <build type="c-source" value="BootloaderPrinter.c"/>
<build type="header-file" value="BootloaderPrinter.h"/> <build type="header-file" value="BootloaderPrinter.h"/>
<build type="c-source" value="Descriptors.c"/> <build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/> <build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/> <build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/> <build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/> <build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/> <build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/> <build type="header-file" value="Config/LUFAConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/> <build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/> <build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
<require idref="lufa.common"/> <require idref="lufa.common"/>
<require idref="lufa.platform"/> <require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/> <require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/> <require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/> <require idref="lufa.drivers.board.leds"/>
</module> </module>
</asf> </asf>

110
tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
Unescape View File

@ -1,55 +1,55 @@
# #
# LUFA Library # LUFA Library
# Copyright (C) Dean Camera, 2014. # Copyright (C) Dean Camera, 2014.
# #
# dean [at] fourwalledcubicle [dot] com # dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org # www.lufa-lib.org
# #
# -------------------------------------- # --------------------------------------
# LUFA Project Makefile. # LUFA Project Makefile.
# -------------------------------------- # --------------------------------------
# Run "make help" for target help. # Run "make help" for target help.
MCU = at90usb1287 MCU = at90usb1287
ARCH = AVR8 ARCH = AVR8
BOARD = USBKEY BOARD = USBKEY
F_CPU = 8000000 F_CPU = 8000000
F_USB = $(F_CPU) F_USB = $(F_CPU)
OPTIMIZATION = s OPTIMIZATION = s
TARGET = BootloaderPrinter TARGET = BootloaderPrinter
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
LUFA_PATH = ../../LUFA LUFA_PATH = ../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET) CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS) LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
# Flash size and bootloader section sizes of the target, in KB. These must # Flash size and bootloader section sizes of the target, in KB. These must
# match the target's total FLASH size and the bootloader size set in the # match the target's total FLASH size and the bootloader size set in the
# device's fuses. # device's fuses.
FLASH_SIZE_KB = 128 FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 8 BOOT_SECTION_SIZE_KB = 8
# Bootloader address calculation formulas # Bootloader address calculation formulas
# Do not modify these macros, but rather modify the dependent values above. # Do not modify these macros, but rather modify the dependent values above.
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) ) CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 ) BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) ) BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
# Bootloader linker section flags for relocating the API table sections to # Bootloader linker section flags for relocating the API table sections to
# known FLASH addresses - these should not normally be user-edited. # known FLASH addresses - these should not normally be user-edited.
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2)) BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96) BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32) BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8) BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
# Default target # Default target
all: all:
# Include LUFA build script makefiles # Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk include $(LUFA_PATH)/Build/lufa_atprogram.mk

84
tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
Unescape View File

@ -1,42 +1,42 @@
# #
# LUFA Library # LUFA Library
# Copyright (C) Dean Camera, 2014. # Copyright (C) Dean Camera, 2014.
# #
# dean [at] fourwalledcubicle [dot] com # dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org # www.lufa-lib.org
# #
# -------------------------------------- # --------------------------------------
# LUFA Project Makefile. # LUFA Project Makefile.
# -------------------------------------- # --------------------------------------
# Run "make help" for target help. # Run "make help" for target help.
MCU = at90usb1287 MCU = at90usb1287
ARCH = AVR8 ARCH = AVR8
F_CPU = 1000000 F_CPU = 1000000
F_USB = $(F_CPU) F_USB = $(F_CPU)
OPTIMIZATION = s OPTIMIZATION = s
TARGET = HID_EEPROM_Loader TARGET = HID_EEPROM_Loader
SRC = $(TARGET).c SRC = $(TARGET).c
LUFA_PATH = ../../../LUFA LUFA_PATH = ../../../LUFA
CC_FLAGS = CC_FLAGS =
LD_FLAGS = LD_FLAGS =
OBJECT_FILES = InputEEData.o OBJECT_FILES = InputEEData.o
# Default target # Default target
all: all:
# Determine the AVR sub-architecture of the build main application object file # Determine the AVR sub-architecture of the build main application object file
FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1) FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
# Create a linkable object file with the input binary EEPROM data stored in the FLASH section # Create a linkable object file with the input binary EEPROM data stored in the FLASH section
InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST) InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\" @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@ avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
# Include LUFA build script makefiles # Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_build.mk include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_hid.mk include $(LUFA_PATH)/Build/lufa_hid.mk

110
tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
Unescape View File

@ -1,55 +1,55 @@
<asf xmlversion="1.0"> <asf xmlversion="1.0">
<project caption="USB Device Template" id="lufa.templates.device.project.avr8"> <project caption="USB Device Template" id="lufa.templates.device.project.avr8">
<require idref="lufa.templates.device"/> <require idref="lufa.templates.device"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8_template"/> <generator value="as5_8_template"/>
<device-support value="at90usb1287"/> <device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/> <config name="lufa.drivers.board.name" value="usbkey"/>
<build type="define" name="F_CPU" value="8000000UL"/> <build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/> <build type="define" name="F_USB" value="8000000UL"/>
</project> </project>
<project caption="USB Device Template" id="lufa.templates.device.project.xmega"> <project caption="USB Device Template" id="lufa.templates.device.project.xmega">
<require idref="lufa.templates.device"/> <require idref="lufa.templates.device"/>
<require idref="lufa.boards.dummy.xmega"/> <require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8_template"/> <generator value="as5_8_template"/>
<device-support value="atxmega256a3bu"/> <device-support value="atxmega256a3bu"/>
<config name="lufa.drivers.board.name" value="a3bu_xplained"/> <config name="lufa.drivers.board.name" value="a3bu_xplained"/>
<build type="define" name="F_CPU" value="32000000UL"/> <build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/> <build type="define" name="F_USB" value="48000000UL"/>
</project> </project>
<module type="application" id="lufa.templates.device" caption="USB Device Template"> <module type="application" id="lufa.templates.device" caption="USB Device Template">
<info type="description" value="summary"> <info type="description" value="summary">
Template for a LUFA USB device mode application. Template for a LUFA USB device mode application.
</info> </info>
<info type="gui-flag" value="move-to-root"/> <info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology"> <info type="keyword" value="Technology">
<keyword value="USB Device"/> <keyword value="USB Device"/>
<keyword value="Template Projects"/> <keyword value="Template Projects"/>
</info> </info>
<device-support-alias value="lufa_avr8"/> <device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/> <device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/> <device-support-alias value="lufa_uc3"/>
<build type="c-source" value="DeviceApplication.c"/> <build type="c-source" value="DeviceApplication.c"/>
<build type="c-source" value="Descriptors.c"/> <build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="DeviceApplication.h"/> <build type="header-file" value="DeviceApplication.h"/>
<build type="header-file" value="Descriptors.h"/> <build type="header-file" value="Descriptors.h"/>
<build type="module-config" subtype="path" value=".."/> <build type="module-config" subtype="path" value=".."/>
<build type="header-file" value="../LUFAConfig.h"/> <build type="header-file" value="../LUFAConfig.h"/>
<require idref="lufa.common"/> <require idref="lufa.common"/>
<require idref="lufa.platform"/> <require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/> <require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/> <require idref="lufa.drivers.board"/>
</module> </module>
</asf> </asf>

82
tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
Unescape View File

@ -1,41 +1,41 @@
<asf xmlversion="1.0"> <asf xmlversion="1.0">
<project caption="USB Host Template" id="lufa.templates.host.project"> <project caption="USB Host Template" id="lufa.templates.host.project">
<require idref="lufa.templates.host"/> <require idref="lufa.templates.host"/>
<require idref="lufa.boards.dummy.avr8"/> <require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8_template"/> <generator value="as5_8_template"/>
<device-support value="at90usb1287"/> <device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/> <config name="lufa.drivers.board.name" value="usbkey"/>
<build type="define" name="F_CPU" value="8000000UL"/> <build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/> <build type="define" name="F_USB" value="8000000UL"/>
</project> </project>
<module type="application" id="lufa.templates.host" caption="USB Host Template"> <module type="application" id="lufa.templates.host" caption="USB Host Template">
<info type="description" value="summary"> <info type="description" value="summary">
Template for a LUFA USB host mode application. Template for a LUFA USB host mode application.
</info> </info>
<info type="gui-flag" value="move-to-root"/> <info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology"> <info type="keyword" value="Technology">
<keyword value="USB Host"/> <keyword value="USB Host"/>
<keyword value="Template Projects"/> <keyword value="Template Projects"/>
</info> </info>
<device-support-alias value="lufa_avr8"/> <device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/> <device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/> <device-support-alias value="lufa_uc3"/>
<build type="c-source" value="HostApplication.c"/> <build type="c-source" value="HostApplication.c"/>
<build type="header-file" value="HostApplication.h"/> <build type="header-file" value="HostApplication.h"/>
<build type="module-config" subtype="path" value=".."/> <build type="module-config" subtype="path" value=".."/>
<build type="header-file" value="../LUFAConfig.h"/> <build type="header-file" value="../LUFAConfig.h"/>
<require idref="lufa.common"/> <require idref="lufa.common"/>
<require idref="lufa.platform"/> <require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/> <require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/> <require idref="lufa.drivers.board"/>
</module> </module>
</asf> </asf>

1950
tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
Unescape View File

@ -1,975 +1,975 @@
/** \file /** \file
* *
* This file contains special DoxyGen information for the generation of the main page and other special * This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file. * documentation pages. It is not a project source file.
*/ */
/** \page Page_BuildSystem The LUFA Build System /** \page Page_BuildSystem The LUFA Build System
* *
* \section Sec_BuildSystem_Overview Overview of the LUFA Build System * \section Sec_BuildSystem_Overview Overview of the LUFA Build System
* The LUFA build system is an attempt at making a set of re-usable, modular build make files which * The LUFA build system is an attempt at making a set of re-usable, modular build make files which
* can be referenced in a LUFA powered project, to minimize the amount of code required in an * can be referenced in a LUFA powered project, to minimize the amount of code required in an
* application makefile. The system is written in GNU Make, and each module is independent of * application makefile. The system is written in GNU Make, and each module is independent of
* one-another. * one-another.
* *
* For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA * For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA
* build system, see \ref Sec_CompilingApps_Prerequisites. * build system, see \ref Sec_CompilingApps_Prerequisites.
* *
* To use a LUFA build system module, simply add an include to your project makefile. All user projects * To use a LUFA build system module, simply add an include to your project makefile. All user projects
* should at a minimum include \ref Page_BuildModule_CORE for base functionality: * should at a minimum include \ref Page_BuildModule_CORE for base functionality:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_core.mk * include $(LUFA_PATH)/Build/lufa_core.mk
* \endcode * \endcode
* *
* Once included in your project makefile, the associated build module targets will be added to your * Once included in your project makefile, the associated build module targets will be added to your
* project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt> * project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>
* from the command line, substituting in the appropriate target name. * from the command line, substituting in the appropriate target name.
* *
* \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile. * \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.
* *
* Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i> * Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>
* be supplied in the project makefile for the module to work, and one or more optional parameters which * be supplied in the project makefile for the module to work, and one or more optional parameters which
* may be defined and which will assume a sensible default if not. * may be defined and which will assume a sensible default if not.
* *
* \section SSec_BuildSystem_Modules Available Modules * \section SSec_BuildSystem_Modules Available Modules
* *
* The following modules are included in this LUFA release: * The following modules are included in this LUFA release:
* *
* \li \subpage Page_BuildModule_ATPROGRAM - Device Programming * \li \subpage Page_BuildModule_ATPROGRAM - Device Programming
* \li \subpage Page_BuildModule_AVRDUDE - Device Programming * \li \subpage Page_BuildModule_AVRDUDE - Device Programming
* \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking * \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking
* \li \subpage Page_BuildModule_CORE - Core Build System Functions * \li \subpage Page_BuildModule_CORE - Core Build System Functions
* \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis * \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis
* \li \subpage Page_BuildModule_DFU - Device Programming * \li \subpage Page_BuildModule_DFU - Device Programming
* \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation * \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation
* \li \subpage Page_BuildModule_HID - Device Programming * \li \subpage Page_BuildModule_HID - Device Programming
* \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables * \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables
* *
* If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps. * If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.
*/ */
/** \page Page_BuildModule_BUILD The BUILD build module /** \page Page_BuildModule_BUILD The BUILD build module
* *
* The BUILD LUFA build system module, providing targets for the compilation, * The BUILD LUFA build system module, providing targets for the compilation,
* assembling and linking of an application from source code into binary files * assembling and linking of an application from source code into binary files
* suitable for programming into a target device, using the GCC compiler. * suitable for programming into a target device, using the GCC compiler.
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_build.mk * include $(LUFA_PATH)/Build/lufa_build.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_BUILD_Requirements Requirements * \section SSec_BuildModule_BUILD_Requirements Requirements
* This module requires the the architecture appropriate binaries of the GCC compiler are available in your * This module requires the the architecture appropriate binaries of the GCC compiler are available in your
* system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio * system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio
* 5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages. * 5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.
* *
* \section SSec_BuildModule_BUILD_Targets Targets * \section SSec_BuildModule_BUILD_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>size</tt></td> * <td><tt>size</tt></td>
* <td>Display size of the compiled application FLASH and SRAM segments.</td> * <td>Display size of the compiled application FLASH and SRAM segments.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>symbol-sizes</tt></td> * <td><tt>symbol-sizes</tt></td>
* <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td> * <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>lib</tt></td> * <td><tt>lib</tt></td>
* <td>Build and archive all source files into a library A binary file.</td> * <td>Build and archive all source files into a library A binary file.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>all</tt></td> * <td><tt>all</tt></td>
* <td>Build and link the application into ELF debug and HEX binary files.</td> * <td>Build and link the application into ELF debug and HEX binary files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>elf</tt></td> * <td><tt>elf</tt></td>
* <td>Build and link the application into an ELF debug file.</td> * <td>Build and link the application into an ELF debug file.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>bin</tt></td> * <td><tt>bin</tt></td>
* <td>Build and link the application and produce a BIN binary file.</td> * <td>Build and link the application and produce a BIN binary file.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>hex</tt></td> * <td><tt>hex</tt></td>
* <td>Build and link the application and produce HEX and EEP binary files.</td> * <td>Build and link the application and produce HEX and EEP binary files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>lss</tt></td> * <td><tt>lss</tt></td>
* <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td> * <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>clean</tt></td> * <td><tt>clean</tt></td>
* <td>Remove all intermediary files and binary output files.</td> * <td>Remove all intermediary files and binary output files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>mostlyclean</tt></td> * <td><tt>mostlyclean</tt></td>
* <td>Remove all intermediary files but preserve any binary output files.</td> * <td>Remove all intermediary files but preserve any binary output files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt><i>&lt;filename&gt;</i>.s</tt></td> * <td><tt><i>&lt;filename&gt;</i>.s</tt></td>
* <td>Create an assembly listing of a given input C/C++ source file.</td> * <td>Create an assembly listing of a given input C/C++ source file.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>TARGET</tt></td> * <td><tt>TARGET</tt></td>
* <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td> * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>ARCH</tt></td> * <td><tt>ARCH</tt></td>
* <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td> * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>MCU</tt></td> * <td><tt>MCU</tt></td>
* <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td> * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>SRC</tt></td> * <td><tt>SRC</tt></td>
* <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td> * <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>F_USB</tt></td> * <td><tt>F_USB</tt></td>
* <td>Speed in Hz of the input clock frequency to the target's USB controller.</td> * <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>LUFA_PATH</tt></td> * <td><tt>LUFA_PATH</tt></td>
* <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters * \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>BOARD</tt></td> * <td><tt>BOARD</tt></td>
* <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td> * <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>OPTIMIZATION</tt></td> * <td><tt>OPTIMIZATION</tt></td>
* <td>Optimization level to use when compiling source files (see GCC manual).</td> * <td>Optimization level to use when compiling source files (see GCC manual).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>C_STANDARD</tt></td> * <td><tt>C_STANDARD</tt></td>
* <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td> * <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPP_STANDARD</tt></td> * <td><tt>CPP_STANDARD</tt></td>
* <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td> * <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>DEBUG_FORMAT</tt></td> * <td><tt>DEBUG_FORMAT</tt></td>
* <td>Format of the debug information to embed in the generated object files (see GCC manual).</td> * <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>DEBUG_LEVEL</tt></td> * <td><tt>DEBUG_LEVEL</tt></td>
* <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td> * <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>F_CPU</tt></td> * <td><tt>F_CPU</tt></td>
* <td>Speed of the processor CPU clock, in Hz.</td> * <td>Speed of the processor CPU clock, in Hz.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>C_FLAGS</tt></td> * <td><tt>C_FLAGS</tt></td>
* <td>Flags to pass to the C compiler only, after the automatically generated flags.</td> * <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPP_FLAGS</tt></td> * <td><tt>CPP_FLAGS</tt></td>
* <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td> * <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>ASM_FLAGS</tt></td> * <td><tt>ASM_FLAGS</tt></td>
* <td>Flags to pass to the assembler only, after the automatically generated flags.</td> * <td>Flags to pass to the assembler only, after the automatically generated flags.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CC_FLAGS</tt></td> * <td><tt>CC_FLAGS</tt></td>
* <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td> * <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>COMPILER_PATH</tt></td> * <td><tt>COMPILER_PATH</tt></td>
* <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td> * <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>LD_FLAGS</tt></td> * <td><tt>LD_FLAGS</tt></td>
* <td>Flags to pass to the linker, after the automatically generated flags.</td> * <td>Flags to pass to the linker, after the automatically generated flags.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>LINKER_RELAXATIONS</tt></td> * <td><tt>LINKER_RELAXATIONS</tt></td>
* <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size * <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size
* of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible. * of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.
* \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you * \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you
* receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td> * receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>OBJDIR</tt></td> * <td><tt>OBJDIR</tt></td>
* <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used. * <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.
* \note When this option is enabled, all source filenames <b>must</b> be unique.</td> * \note When this option is enabled, all source filenames <b>must</b> be unique.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>OBJECT_FILES</tt></td> * <td><tt>OBJECT_FILES</tt></td>
* <td>List of additional object files that should be linked into the resulting binary.</td> * <td>List of additional object files that should be linked into the resulting binary.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildModule_CORE The CORE build module /** \page Page_BuildModule_CORE The CORE build module
* *
* The core LUFA build system module, providing common build system help and information targets. * The core LUFA build system module, providing common build system help and information targets.
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_core.mk * include $(LUFA_PATH)/Build/lufa_core.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_CORE_Requirements Requirements * \section SSec_BuildModule_CORE_Requirements Requirements
* This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt> * This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>
* shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.). * shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).
* *
* \section SSec_BuildModule_CORE_Targets Targets * \section SSec_BuildModule_CORE_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>help</tt></td> * <td><tt>help</tt></td>
* <td>Display build system help and configuration information.</td> * <td>Display build system help and configuration information.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>list_targets</tt></td> * <td><tt>list_targets</tt></td>
* <td>List all available build targets from the build system.</td> * <td>List all available build targets from the build system.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>list_modules</tt></td> * <td><tt>list_modules</tt></td>
* <td>List all available build modules from the build system.</td> * <td>List all available build modules from the build system.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>list_mandatory</tt></td> * <td><tt>list_mandatory</tt></td>
* <td>List all mandatory parameters required by the included modules.</td> * <td>List all mandatory parameters required by the included modules.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>list_optional</tt></td> * <td><tt>list_optional</tt></td>
* <td>List all optional parameters required by the included modules.</td> * <td>List all optional parameters required by the included modules.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>list_provided</tt></td> * <td><tt>list_provided</tt></td>
* <td>List all variables provided by the included modules.</td> * <td>List all variables provided by the included modules.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>list_macros</tt></td> * <td><tt>list_macros</tt></td>
* <td>List all macros provided by the included modules.</td> * <td>List all macros provided by the included modules.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_CORE_OptionalParams Optional Parameters * \section SSec_BuildModule_CORE_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module /** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module
* *
* The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an * The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an
* Atmel processor FLASH and EEPROM memories with a project's compiled binary output files. * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_atprogram.mk * include $(LUFA_PATH)/Build/lufa_atprogram.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_ATPROGRAM_Requirements Requirements * \section SSec_BuildModule_ATPROGRAM_Requirements Requirements
* This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b> * This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>
* variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x * variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x
* inside the application install folder's "\atbackend" subdirectory. * inside the application install folder's "\atbackend" subdirectory.
* *
* \section SSec_BuildModule_ATPROGRAM_Targets Targets * \section SSec_BuildModule_ATPROGRAM_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>atprogram</tt></td> * <td><tt>atprogram</tt></td>
* <td>Program the device FLASH memory with the application's executable data.</td> * <td>Program the device FLASH memory with the application's executable data.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>atprogram-ee</tt></td> * <td><tt>atprogram-ee</tt></td>
* <td>Program the device EEPROM memory with the application's EEPROM data.</td> * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>MCU</tt></td> * <td><tt>MCU</tt></td>
* <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td> * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>TARGET</tt></td> * <td><tt>TARGET</tt></td>
* <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td> * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters * \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>ATPROGRAM_PROGRAMMER</tt></td> * <td><tt>ATPROGRAM_PROGRAMMER</tt></td>
* <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td> * <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>ATPROGRAM_INTERFACE</tt></td> * <td><tt>ATPROGRAM_INTERFACE</tt></td>
* <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td> * <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>ATPROGRAM_PORT</tt></td> * <td><tt>ATPROGRAM_PORT</tt></td>
* <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td> * <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module /** \page Page_BuildModule_AVRDUDE The AVRDUDE build module
* *
* The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an * The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an
* Atmel processor FLASH and EEPROM memories with a project's compiled binary output files. * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_avrdude.mk * include $(LUFA_PATH)/Build/lufa_avrdude.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_AVRDUDE_Requirements Requirements * \section SSec_BuildModule_AVRDUDE_Requirements Requirements
* This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b> * This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>
* variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for * variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for
* Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's * Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's
* source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager. * source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.
* *
* \section SSec_BuildModule_AVRDUDE_Targets Targets * \section SSec_BuildModule_AVRDUDE_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>avrdude</tt></td> * <td><tt>avrdude</tt></td>
* <td>Program the device FLASH memory with the application's executable data.</td> * <td>Program the device FLASH memory with the application's executable data.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>avrdude-ee</tt></td> * <td><tt>avrdude-ee</tt></td>
* <td>Program the device EEPROM memory with the application's EEPROM data.</td> * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>MCU</tt></td> * <td><tt>MCU</tt></td>
* <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td> * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>TARGET</tt></td> * <td><tt>TARGET</tt></td>
* <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td> * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters * \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>AVRDUDE_PROGRAMMER</tt></td> * <td><tt>AVRDUDE_PROGRAMMER</tt></td>
* <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td> * <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>AVRDUDE_PORT</tt></td> * <td><tt>AVRDUDE_PORT</tt></td>
* <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td> * <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>AVRDUDE_FLAGS</tt></td> * <td><tt>AVRDUDE_FLAGS</tt></td>
* <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td> * <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildModule_CPPCHECK The CPPCHECK build module /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module
* *
* The CPPCHECK programming utility LUFA build system module, providing targets to statically * The CPPCHECK programming utility LUFA build system module, providing targets to statically
* analyze C and C++ source code for errors and performance/style issues. * analyze C and C++ source code for errors and performance/style issues.
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_cppcheck.mk * include $(LUFA_PATH)/Build/lufa_cppcheck.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_CPPCHECK_Requirements Requirements * \section SSec_BuildModule_CPPCHECK_Requirements Requirements
* This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b> * This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>
* variable. The <tt>cppcheck</tt> utility is distributed through the project's home page * variable. The <tt>cppcheck</tt> utility is distributed through the project's home page
* (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via * (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via
* the project's source code or through the package manager. * the project's source code or through the package manager.
* *
* \section SSec_BuildModule_CPPCHECK_Targets Targets * \section SSec_BuildModule_CPPCHECK_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>cppcheck</tt></td> * <td><tt>cppcheck</tt></td>
* <td>Statically analyze the project source code for issues.</td> * <td>Statically analyze the project source code for issues.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>cppcheck-config</tt></td> * <td><tt>cppcheck-config</tt></td>
* <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td> * <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>SRC</tt></td> * <td><tt>SRC</tt></td>
* <td>List of source files to statically analyze.</td> * <td>List of source files to statically analyze.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters * \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>CPPCHECK_INCLUDES</tt></td> * <td><tt>CPPCHECK_INCLUDES</tt></td>
* <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td> * <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPPCHECK_EXCLUDES</tt></td> * <td><tt>CPPCHECK_EXCLUDES</tt></td>
* <td>Paths or path fragments to exclude when analyzing.</td> * <td>Paths or path fragments to exclude when analyzing.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td> * <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>
* <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td> * <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPPCHECK_ENABLE</tt></td> * <td><tt>CPPCHECK_ENABLE</tt></td>
* <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td> * <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPPCHECK_SUPPRESS</tt></td> * <td><tt>CPPCHECK_SUPPRESS</tt></td>
* <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td> * <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td> * <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>
* <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td> * <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPPCHECK_QUIET</tt></td> * <td><tt>CPPCHECK_QUIET</tt></td>
* <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td> * <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>CPPCHECK_FLAGS</tt></td> * <td><tt>CPPCHECK_FLAGS</tt></td>
* <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td> * <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildModule_DFU The DFU build module /** \page Page_BuildModule_DFU The DFU build module
* *
* The DFU programming utility LUFA build system module, providing targets to reprogram an * The DFU programming utility LUFA build system module, providing targets to reprogram an
* Atmel processor FLASH and EEPROM memories with a project's compiled binary output files. * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
* This module requires a DFU class bootloader to be running in the target, compatible with * This module requires a DFU class bootloader to be running in the target, compatible with
* the DFU bootloader protocol as published by Atmel. * the DFU bootloader protocol as published by Atmel.
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_dfu.mk * include $(LUFA_PATH)/Build/lufa_dfu.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_DFU_Requirements Requirements * \section SSec_BuildModule_DFU_Requirements Requirements
* This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open * This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open
* source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be * source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be
* available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility * available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility
* can be installed via the project's source code or through the package manager. * can be installed via the project's source code or through the package manager.
* *
* \section SSec_BuildModule_DFU_Targets Targets * \section SSec_BuildModule_DFU_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>dfu</tt></td> * <td><tt>dfu</tt></td>
* <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td> * <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>dfu-ee</tt></td> * <td><tt>dfu-ee</tt></td>
* <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td> * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>flip</tt></td> * <td><tt>flip</tt></td>
* <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td> * <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>flip-ee</tt></td> * <td><tt>flip-ee</tt></td>
* <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td> * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>MCU</tt></td> * <td><tt>MCU</tt></td>
* <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td> * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>TARGET</tt></td> * <td><tt>TARGET</tt></td>
* <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td> * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_DFU_OptionalParams Optional Parameters * \section SSec_BuildModule_DFU_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildModule_DOXYGEN The DOXYGEN build module /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module
* *
* The DOXYGEN code documentation utility LUFA build system module, providing targets to generate * The DOXYGEN code documentation utility LUFA build system module, providing targets to generate
* project HTML and other format documentation from a set of source files that include special * project HTML and other format documentation from a set of source files that include special
* Doxygen comments. * Doxygen comments.
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_doxygen.mk * include $(LUFA_PATH)/Build/lufa_doxygen.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_DOXYGEN_Requirements Requirements * \section SSec_BuildModule_DOXYGEN_Requirements Requirements
* This module requires the <tt>doxygen</tt> utility from the Doxygen website * This module requires the <tt>doxygen</tt> utility from the Doxygen website
* (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix * (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix
* systems the <tt>doxygen</tt> utility can be installed via the project's source code or through * systems the <tt>doxygen</tt> utility can be installed via the project's source code or through
* the package manager. * the package manager.
* *
* \section SSec_BuildModule_DOXYGEN_Targets Targets * \section SSec_BuildModule_DOXYGEN_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>doxygen</tt></td> * <td><tt>doxygen</tt></td>
* <td>Generate project documentation.</td> * <td>Generate project documentation.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>doxygen_create</tt></td> * <td><tt>doxygen_create</tt></td>
* <td>Create a new Doxygen configuration file using the latest template.</td> * <td>Create a new Doxygen configuration file using the latest template.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>doxygen_upgrade</tt></td> * <td><tt>doxygen_upgrade</tt></td>
* <td>Upgrade an existing Doxygen configuration file to the latest template</td> * <td>Upgrade an existing Doxygen configuration file to the latest template</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>LUFA_PATH</tt></td> * <td><tt>LUFA_PATH</tt></td>
* <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters * \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>DOXYGEN_CONF</tt></td> * <td><tt>DOXYGEN_CONF</tt></td>
* <td>Name and path of the base Doxygen configuration file for the project.</td> * <td>Name and path of the base Doxygen configuration file for the project.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td> * <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>
* <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td> * <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td> * <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>
* <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td> * <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildModule_HID The HID build module /** \page Page_BuildModule_HID The HID build module
* *
* The HID programming utility LUFA build system module, providing targets to reprogram an * The HID programming utility LUFA build system module, providing targets to reprogram an
* Atmel processor's FLASH memory with a project's compiled binary output file. This module * Atmel processor's FLASH memory with a project's compiled binary output file. This module
* requires a HID class bootloader to be running in the target, using a protocol compatible * requires a HID class bootloader to be running in the target, using a protocol compatible
* with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>). * with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_hid.mk * include $(LUFA_PATH)/Build/lufa_hid.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_HID_Requirements Requirements * \section SSec_BuildModule_HID_Requirements Requirements
* This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID * This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID
* class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC * class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC
* (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b> * (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>
* variable. * variable.
* *
* \section SSec_BuildModule_HID_Targets Targets * \section SSec_BuildModule_HID_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>hid</tt></td> * <td><tt>hid</tt></td>
* <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td> * <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>hid-ee</tt></td> * <td><tt>hid-ee</tt></td>
* <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and
* a temporary AVR application programmed into the target's FLASH. * a temporary AVR application programmed into the target's FLASH.
* \note This will erase the currently loaded application in the target.</td> * \note This will erase the currently loaded application in the target.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>teensy</tt></td> * <td><tt>teensy</tt></td>
* <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td> * <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>teensy-ee</tt></td> * <td><tt>teensy-ee</tt></td>
* <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and
* a temporary AVR application programmed into the target's FLASH. * a temporary AVR application programmed into the target's FLASH.
* \note This will erase the currently loaded application in the target.</td> * \note This will erase the currently loaded application in the target.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>MCU</tt></td> * <td><tt>MCU</tt></td>
* <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td> * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>TARGET</tt></td> * <td><tt>TARGET</tt></td>
* <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td> * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_HID_OptionalParams Optional Parameters * \section SSec_BuildModule_HID_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildModule_SOURCES The SOURCES build module /** \page Page_BuildModule_SOURCES The SOURCES build module
* *
* The SOURCES LUFA build system module, providing variables listing the various LUFA source files * The SOURCES LUFA build system module, providing variables listing the various LUFA source files
* required to be build by a project for a given LUFA module. This module gives a way to reference * required to be build by a project for a given LUFA module. This module gives a way to reference
* LUFA source files symbolically, so that changes to the library structure do not break the library * LUFA source files symbolically, so that changes to the library structure do not break the library
* makefile. * makefile.
* *
* To use this module in your application makefile, add the following code: * To use this module in your application makefile, add the following code:
* \code * \code
* include $(LUFA_PATH)/Build/lufa_sources.mk * include $(LUFA_PATH)/Build/lufa_sources.mk
* \endcode * \endcode
* *
* \section SSec_BuildModule_SOURCES_Requirements Requirements * \section SSec_BuildModule_SOURCES_Requirements Requirements
* None. * None.
* *
* \section SSec_BuildModule_SOURCES_Targets Targets * \section SSec_BuildModule_SOURCES_Targets Targets
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>LUFA_PATH</tt></td> * <td><tt>LUFA_PATH</tt></td>
* <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>ARCH</tt></td> * <td><tt>ARCH</tt></td>
* <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td> * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters * \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables * \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables
* *
* <table> * <table>
* <tr> * <tr>
* <td><tt>LUFA_SRC_USB</tt></td> * <td><tt>LUFA_SRC_USB</tt></td>
* <td>List of LUFA USB driver source files.</td> * <td>List of LUFA USB driver source files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>LUFA_SRC_USBCLASS</tt></td> * <td><tt>LUFA_SRC_USBCLASS</tt></td>
* <td>List of LUFA USB Class driver source files.</td> * <td>List of LUFA USB Class driver source files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>LUFA_SRC_TEMPERATURE</tt></td> * <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
* <td>List of LUFA temperature sensor driver source files.</td> * <td>List of LUFA temperature sensor driver source files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>LUFA_SRC_SERIAL</tt></td> * <td><tt>LUFA_SRC_SERIAL</tt></td>
* <td>List of LUFA Serial U(S)ART driver source files.</td> * <td>List of LUFA Serial U(S)ART driver source files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>LUFA_SRC_TWI</tt></td> * <td><tt>LUFA_SRC_TWI</tt></td>
* <td>List of LUFA TWI driver source files.</td> * <td>List of LUFA TWI driver source files.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td><tt>LUFA_SRC_PLATFORM</tt></td> * <td><tt>LUFA_SRC_PLATFORM</tt></td>
* <td>List of LUFA architecture specific platform management source files.</td> * <td>List of LUFA architecture specific platform management source files.</td>
* </tr> * </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros * \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros
* *
* <table> * <table>
* <tr> * <tr>
* <td><i>None</i></td> * <td><i>None</i></td>
* </tr> * </tr>
* </table> * </table>
*/ */
/** \page Page_BuildTroubleshooting Troubleshooting Information /** \page Page_BuildTroubleshooting Troubleshooting Information
* *
* LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these * LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these
* features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different * features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different
* errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions. * errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.
* *
* <table> * <table>
* <tr> * <tr>
* <th>Problem</th> * <th>Problem</th>
* <th>Resolution</th> * <th>Resolution</th>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>
* <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt> * <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
* from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td> * from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>
* <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td> * <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>
* <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with * <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
* GNU make or other variants of Make causing an infinitely recursive build.</td> * GNU make or other variants of Make causing an infinitely recursive build.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>
* <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td> * <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>
* <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA * <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
* build system modules. Define the value in your project makefile and try again.</td> * build system modules. Define the value in your project makefile and try again.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>
* <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
* option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td> * option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>
* <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No"). * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
* This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td> * This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
* <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not * <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
* recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td> * recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>
* <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path. * <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
* This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td> * This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
* <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or * <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
* relative path given in the user project makefile is correct and try again.</td> * relative path given in the user project makefile is correct and try again.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td> * <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>
* <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists * <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
* and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration * and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
* file.</td> * file.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
* <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration * <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
* options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or * options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
* upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td> * upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td> * <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>
* <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or * <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
* absolute path to the LUFA library core.</td> * absolute path to the LUFA library core.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>
* <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be * <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
* found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt> * found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
* parameter.</td> * parameter.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td> * <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>
* <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This * <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
* usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the * usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
* compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td> * compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>
* <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the * <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
* version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td> * version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
* </tr> * </tr>
* <tr> * <tr>
* <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td> * <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
* <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA * <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
* library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td> * library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>
* </tr> * </tr>
* </table> * </table>
* *
* For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp. * For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
*/ */

Write Preview
Loading…
Cancel
Save