Damien
8 years ago
committed by
GitHub
commit
af24ea558a
@ -0,0 +1,221 @@
|
||||
ifndef VERBOSE
|
||||
.SILENT:
|
||||
endif
|
||||
|
||||
.DEFAULT_GOAL := all
|
||||
|
||||
include common.mk
|
||||
|
||||
ifneq ($(SUBPROJECT),)
|
||||
TARGET ?= $(KEYBOARD)_$(SUBPROJECT)_$(KEYMAP)
|
||||
KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD)_$(SUBPROJECT)
|
||||
else
|
||||
TARGET ?= $(KEYBOARD)_$(KEYMAP)
|
||||
KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD)
|
||||
endif
|
||||
|
||||
# Force expansion
|
||||
TARGET := $(TARGET)
|
||||
|
||||
|
||||
MASTER ?= left
|
||||
ifdef master
|
||||
MASTER = $(master)
|
||||
endif
|
||||
|
||||
ifeq ($(MASTER),right)
|
||||
OPT_DEFS += -DMASTER_IS_ON_RIGHT
|
||||
else
|
||||
ifneq ($(MASTER),left)
|
||||
$(error MASTER does not have a valid value(left/right))
|
||||
endif
|
||||
endif
|
||||
|
||||
|
||||
|
||||
KEYBOARD_PATH := keyboards/$(KEYBOARD)
|
||||
KEYBOARD_C := $(KEYBOARD_PATH)/$(KEYBOARD).c
|
||||
|
||||
ifneq ("$(wildcard $(KEYBOARD_C))","")
|
||||
include $(KEYBOARD_PATH)/rules.mk
|
||||
else
|
||||
$(error "$(KEYBOARD_C)" does not exist)
|
||||
endif
|
||||
|
||||
|
||||
ifneq ($(SUBPROJECT),)
|
||||
SUBPROJECT_PATH := keyboards/$(KEYBOARD)/$(SUBPROJECT)
|
||||
SUBPROJECT_C := $(SUBPROJECT_PATH)/$(SUBPROJECT).c
|
||||
ifneq ("$(wildcard $(SUBPROJECT_C))","")
|
||||
OPT_DEFS += -DSUBPROJECT_$(SUBPROJECT)
|
||||
include $(SUBPROJECT_PATH)/rules.mk
|
||||
else
|
||||
$(error "$(SUBPROJECT_PATH)/$(SUBPROJECT).c" does not exist)
|
||||
endif
|
||||
endif
|
||||
|
||||
# We can assume a ChibiOS target When MCU_FAMILY is defined, since it's not used for LUFA
|
||||
ifdef MCU_FAMILY
|
||||
PLATFORM=CHIBIOS
|
||||
else
|
||||
PLATFORM=AVR
|
||||
endif
|
||||
|
||||
ifeq ($(PLATFORM),CHIBIOS)
|
||||
include $(TMK_PATH)/protocol/chibios.mk
|
||||
include $(TMK_PATH)/chibios.mk
|
||||
OPT_OS = chibios
|
||||
ifneq ("$(wildcard $(SUBPROJECT_PATH)/bootloader_defs.h)","")
|
||||
OPT_DEFS += -include $(SUBPROJECT_PATH)/bootloader_defs.h
|
||||
else ifneq ("$(wildcard $(SUBPROJECT_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
|
||||
OPT_DEFS += -include $(SUBPROJECT_PATH)/boards/$(BOARD)/bootloader_defs.h
|
||||
else ifneq ("$(wildcard $(KEYBOARD_PATH)/bootloader_defs.h)","")
|
||||
OPT_DEFS += -include $(KEYBOARD_PATH)/bootloader_defs.h
|
||||
else ifneq ("$(wildcard $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
|
||||
OPT_DEFS += -include $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h
|
||||
endif
|
||||
endif
|
||||
|
||||
CONFIG_H = $(KEYBOARD_PATH)/config.h
|
||||
ifneq ($(SUBPROJECT),)
|
||||
ifneq ("$(wildcard $(SUBPROJECT_C))","")
|
||||
CONFIG_H = $(SUBPROJECT_PATH)/config.h
|
||||
endif
|
||||
endif
|
||||
|
||||
# Save the defines and includes here, so we don't include any keymap specific ones
|
||||
PROJECT_DEFS := $(OPT_DEFS)
|
||||
PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(SUBPROJECT_PATH) $(KEYBOARD_PATH)
|
||||
PROJECT_CONFIG := $(CONFIG_H)
|
||||
|
||||
MAIN_KEYMAP_PATH := $(KEYBOARD_PATH)/keymaps/$(KEYMAP)
|
||||
MAIN_KEYMAP_C := $(MAIN_KEYMAP_PATH)/keymap.c
|
||||
SUBPROJ_KEYMAP_PATH := $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)
|
||||
SUBPROJ_KEYMAP_C := $(SUBPROJ_KEYMAP_PATH)/keymap.c
|
||||
ifneq ("$(wildcard $(SUBPROJ_KEYMAP_C))","")
|
||||
-include $(SUBPROJ_KEYMAP_PATH)/Makefile
|
||||
KEYMAP_C := $(SUBPROJ_KEYMAP_C)
|
||||
KEYMAP_PATH := $(SUBPROJ_KEYMAP_PATH)
|
||||
else ifneq ("$(wildcard $(MAIN_KEYMAP_C))","")
|
||||
-include $(MAIN_KEYMAP_PATH)/Makefile
|
||||
KEYMAP_C := $(MAIN_KEYMAP_C)
|
||||
KEYMAP_PATH := $(MAIN_KEYMAP_PATH)
|
||||
else
|
||||
$(error "$(MAIN_KEYMAP_C)/keymap.c" does not exist)
|
||||
endif
|
||||
|
||||
|
||||
# Object files directory
|
||||
# To put object files in current directory, use a dot (.), do NOT make
|
||||
# this an empty or blank macro!
|
||||
KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
|
||||
|
||||
|
||||
ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
|
||||
CONFIG_H = $(KEYMAP_PATH)/config.h
|
||||
endif
|
||||
|
||||
# # project specific files
|
||||
SRC += $(KEYBOARD_C) \
|
||||
$(KEYMAP_C) \
|
||||
$(QUANTUM_DIR)/quantum.c \
|
||||
$(QUANTUM_DIR)/keymap_common.c \
|
||||
$(QUANTUM_DIR)/keycode_config.c \
|
||||
$(QUANTUM_DIR)/process_keycode/process_leader.c
|
||||
|
||||
ifneq ($(SUBPROJECT),)
|
||||
SRC += $(SUBPROJECT_C)
|
||||
endif
|
||||
|
||||
ifndef CUSTOM_MATRIX
|
||||
SRC += $(QUANTUM_DIR)/matrix.c
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(MIDI_ENABLE)), yes)
|
||||
OPT_DEFS += -DMIDI_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(VIRTSER_ENABLE)), yes)
|
||||
OPT_DEFS += -DVIRTSER_ENABLE
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(AUDIO_ENABLE)), yes)
|
||||
OPT_DEFS += -DAUDIO_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_music.c
|
||||
SRC += $(QUANTUM_DIR)/audio/audio.c
|
||||
SRC += $(QUANTUM_DIR)/audio/voices.c
|
||||
SRC += $(QUANTUM_DIR)/audio/luts.c
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(UNICODE_ENABLE)), yes)
|
||||
OPT_DEFS += -DUNICODE_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
|
||||
OPT_DEFS += -DRGBLIGHT_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/light_ws2812.c
|
||||
SRC += $(QUANTUM_DIR)/rgblight.c
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
|
||||
OPT_DEFS += -DTAP_DANCE_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes)
|
||||
SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC))
|
||||
OPT_DEFS += $(SERIAL_DEFS)
|
||||
VAPTH += $(SERIAL_PATH)
|
||||
endif
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(KEYMAP_PATH)
|
||||
ifneq ($(SUBPROJECT),)
|
||||
VPATH += $(SUBPROJECT_PATH)
|
||||
endif
|
||||
VPATH += $(KEYBOARD_PATH)
|
||||
VPATH += $(COMMON_VPATH)
|
||||
|
||||
|
||||
include $(TMK_PATH)/common.mk
|
||||
SRC += $(TMK_COMMON_SRC)
|
||||
OPT_DEFS += $(TMK_COMMON_DEFS)
|
||||
EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
|
||||
|
||||
ifeq ($(PLATFORM),AVR)
|
||||
include $(TMK_PATH)/protocol/lufa.mk
|
||||
include $(TMK_PATH)/avr.mk
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
|
||||
VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer
|
||||
VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer
|
||||
include $(VISUALIZER_PATH)/visualizer.mk
|
||||
endif
|
||||
|
||||
OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
|
||||
$(KEYMAP_OUTPUT)_SRC := $(SRC)
|
||||
$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) -DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYMAP=\"$(KEYMAP)\"
|
||||
$(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS)
|
||||
$(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
|
||||
$(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC)
|
||||
$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS)
|
||||
$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC)
|
||||
$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
|
||||
|
||||
# Default target.
|
||||
all: build sizeafter
|
||||
|
||||
# Change the build target to build a HEX file or a library.
|
||||
build: elf hex
|
||||
#build: elf hex eep lss sym
|
||||
#build: lib
|
||||
|
||||
|
||||
include $(TMK_PATH)/rules.mk
|
||||
|
||||
@ -0,0 +1,57 @@
|
||||
ifndef VERBOSE
|
||||
.SILENT:
|
||||
endif
|
||||
|
||||
.DEFAULT_GOAL := all
|
||||
|
||||
include common.mk
|
||||
|
||||
TARGET=test/$(TEST)
|
||||
|
||||
GTEST_OUTPUT = $(BUILD_DIR)/gtest
|
||||
|
||||
TEST_OBJ = $(BUILD_DIR)/test_obj
|
||||
|
||||
OUTPUTS := $(TEST_OBJ)/$(TEST) $(GTEST_OUTPUT)
|
||||
|
||||
GTEST_INC := \
|
||||
$(LIB_PATH)/googletest/googletest/include\
|
||||
$(LIB_PATH)/googletest/googlemock/include\
|
||||
|
||||
GTEST_INTERNAL_INC :=\
|
||||
$(LIB_PATH)/googletest/googletest\
|
||||
$(LIB_PATH)/googletest/googlemock
|
||||
|
||||
$(GTEST_OUTPUT)_SRC :=\
|
||||
googletest/src/gtest-all.cc\
|
||||
googletest/src/gtest_main.cc\
|
||||
googlemock/src/gmock-all.cc
|
||||
|
||||
$(GTEST_OUTPUT)_DEFS :=
|
||||
$(GTEST_OUTPUT)_INC := $(GTEST_INC) $(GTEST_INTERNAL_INC)
|
||||
|
||||
LDFLAGS += -lstdc++ -lpthread -shared-libgcc
|
||||
CREATE_MAP := no
|
||||
|
||||
VPATH +=\
|
||||
$(LIB_PATH)/googletest\
|
||||
$(LIB_PATH)/googlemock
|
||||
|
||||
all: elf
|
||||
|
||||
VPATH += $(COMMON_VPATH)
|
||||
|
||||
include $(TMK_PATH)/common.mk
|
||||
include $(QUANTUM_PATH)/serial_link/tests/rules.mk
|
||||
|
||||
$(TEST_OBJ)/$(TEST)_SRC := $($(TEST)_SRC)
|
||||
$(TEST_OBJ)/$(TEST)_INC := $($(TEST)_INC) $(VPATH) $(GTEST_INC)
|
||||
$(TEST_OBJ)/$(TEST)_DEFS := $($(TEST)_DEFS)
|
||||
|
||||
include $(TMK_PATH)/native.mk
|
||||
include $(TMK_PATH)/rules.mk
|
||||
|
||||
|
||||
$(shell mkdir -p $(BUILD_DIR)/test 2>/dev/null)
|
||||
$(shell mkdir -p $(TEST_OBJ) 2>/dev/null)
|
||||
|
||||
@ -0,0 +1,26 @@
|
||||
include message.mk
|
||||
|
||||
# Directory common source files exist
|
||||
TOP_DIR = .
|
||||
TMK_DIR = tmk_core
|
||||
TMK_PATH = $(TOP_DIR)/$(TMK_DIR)
|
||||
LIB_PATH = $(TOP_DIR)/lib
|
||||
|
||||
QUANTUM_DIR = quantum
|
||||
QUANTUM_PATH = $(TOP_DIR)/$(QUANTUM_DIR)
|
||||
|
||||
BUILD_DIR := $(TOP_DIR)/.build
|
||||
|
||||
SERIAL_DIR := $(QUANTUM_DIR)/serial_link
|
||||
SERIAL_PATH := $(QUANTUM_PATH)/serial_link
|
||||
SERIAL_SRC := $(wildcard $(SERIAL_PATH)/protocol/*.c)
|
||||
SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c)
|
||||
SERIAL_DEFS += -DSERIAL_LINK_ENABLE
|
||||
|
||||
COMMON_VPATH := $(TOP_DIR)
|
||||
COMMON_VPATH += $(TMK_PATH)
|
||||
COMMON_VPATH += $(QUANTUM_PATH)
|
||||
COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
|
||||
COMMON_VPATH += $(QUANTUM_PATH)/audio
|
||||
COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
|
||||
COMMON_VPATH += $(SERIAL_PATH)
|
||||
@ -1,70 +1,3 @@
|
||||
|
||||
|
||||
# Target file name (without extension).
|
||||
|
||||
# project specific files
|
||||
SRC = led.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u2
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,66 @@
|
||||
|
||||
|
||||
# Target file name (without extension).
|
||||
|
||||
# project specific files
|
||||
SRC = led.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u2
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
@ -1,70 +1,3 @@
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,66 @@
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,74 +1,3 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,70 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
@ -1,73 +1,3 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,69 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
@ -0,0 +1,82 @@
|
||||
|
||||
|
||||
ifdef TEENSY2
|
||||
OPT_DEFS += -DATREUS_TEENSY2
|
||||
ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
||||
else
|
||||
OPT_DEFS += -DATREUS_ASTAR
|
||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||
ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
endif
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB ?= /dev/cu.usbmodem1411
|
||||
|
||||
upload: build
|
||||
$(ATRUES_UPLOAD_COMMAND)
|
||||
@ -0,0 +1,67 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,14 +1,5 @@
|
||||
SUBPROJECT_DEFAULT = stm32_f072_onekey
|
||||
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||
CONSOLE_ENABLE ?= yes # Console for debug
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,8 @@
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||
CONSOLE_ENABLE ?= yes # Console for debug
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file
|
||||
@ -1,41 +1,3 @@
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F0xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F072xB
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f0xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = ST_STM32F072B_DISCOVERY
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,41 @@
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F0xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F072xB
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f0xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = ST_STM32F072B_DISCOVERY
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -1,52 +1,3 @@
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||
BOARD = GENERIC_STM32_F103
|
||||
|
||||
# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
|
||||
# OPT_DEFS =
|
||||
# MCU_LDSCRIPT = STM32F103x8
|
||||
# BOARD = GENERIC_STM32_F103
|
||||
|
||||
# MAPLE MINI
|
||||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
|
||||
# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
|
||||
# BOARD = MAPLEMINI_STM32_F103
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F1xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f1xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m3
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,52 @@
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||
BOARD = GENERIC_STM32_F103
|
||||
|
||||
# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
|
||||
# OPT_DEFS =
|
||||
# MCU_LDSCRIPT = STM32F103x8
|
||||
# BOARD = GENERIC_STM32_F103
|
||||
|
||||
# MAPLE MINI
|
||||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
|
||||
# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
|
||||
# BOARD = MAPLEMINI_STM32_F103
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F1xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f1xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m3
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -1,49 +1,3 @@
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
||||
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
||||
MCU_FAMILY = KINETIS
|
||||
MCU_SERIES = KL2x
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
||||
# - LDSCRIPT =
|
||||
# - MKL26Z64 for Teensy LC
|
||||
# - MK20DX128 for Teensy 3.0
|
||||
# - MK20DX256 for Teensy 3.1 and 3.2
|
||||
MCU_LDSCRIPT = MKL26Z64
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
# - STARTUP =
|
||||
# - kl2x for Teensy LC
|
||||
# - k20x5 for Teensy 3.0
|
||||
# - k20x7 for Teensy 3.1 and 3.2
|
||||
MCU_STARTUP = kl2x
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# - BOARD =
|
||||
# - PJRC_TEENSY_LC for Teensy LC
|
||||
# - PJRC_TEENSY_3 for Teensy 3.0
|
||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
||||
BOARD = PJRC_TEENSY_LC
|
||||
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0plus
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
||||
ARMV = 6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,49 @@
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
||||
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
||||
MCU_FAMILY = KINETIS
|
||||
MCU_SERIES = KL2x
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
||||
# - LDSCRIPT =
|
||||
# - MKL26Z64 for Teensy LC
|
||||
# - MK20DX128 for Teensy 3.0
|
||||
# - MK20DX256 for Teensy 3.1 and 3.2
|
||||
MCU_LDSCRIPT = MKL26Z64
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
# - STARTUP =
|
||||
# - kl2x for Teensy LC
|
||||
# - k20x5 for Teensy 3.0
|
||||
# - k20x7 for Teensy 3.1 and 3.2
|
||||
MCU_STARTUP = kl2x
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# - BOARD =
|
||||
# - PJRC_TEENSY_LC for Teensy LC
|
||||
# - PJRC_TEENSY_3 for Teensy 3.0
|
||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
||||
BOARD = PJRC_TEENSY_LC
|
||||
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0plus
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
||||
ARMV = 6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -1,109 +1,5 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
SUBPROJECT_DEFAULT = rev2
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change to no to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -1,5 +1,3 @@
|
||||
BACKLIGHT_ENABLE = no
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,5 @@
|
||||
BACKLIGHT_ENABLE = no
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -1,5 +1,3 @@
|
||||
BACKLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,5 @@
|
||||
BACKLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,103 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -0,0 +1,70 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= yes # Audio output on port C6
|
||||
@ -1,70 +1,3 @@
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,65 @@
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,34 +1,5 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
SUBPROJECT_DEFAULT = ez
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= yes # Unicode
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -1,76 +1,3 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# # project specific files
|
||||
SRC = twimaster.c \
|
||||
matrix.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,76 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# # project specific files
|
||||
SRC = twimaster.c \
|
||||
matrix.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,77 @@
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
||||
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
||||
# - For Infinity KB, SERIES = K20x
|
||||
MCU_FAMILY = KINETIS
|
||||
MCU_SERIES = K20x
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
||||
# - LDSCRIPT =
|
||||
# - MKL26Z64 for Teensy LC
|
||||
# - MK20DX128 for Teensy 3.0
|
||||
# - MK20DX256 for Teensy 3.1 and 3.2
|
||||
# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
|
||||
# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
|
||||
MCU_LDSCRIPT = MK20DX256BLDR8
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
# - STARTUP =
|
||||
# - kl2x for Teensy LC
|
||||
# - k20x5 for Teensy 3.0 and Infinity 60%
|
||||
# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
|
||||
MCU_STARTUP = k20x7
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# - BOARD =
|
||||
# - PJRC_TEENSY_LC for Teensy LC
|
||||
# - PJRC_TEENSY_3 for Teensy 3.0
|
||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
||||
# - MCHCK_K20 for Infinity KB
|
||||
#BOARD = MCHCK_K20
|
||||
BOARD = PJRC_TEENSY_3_1
|
||||
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
||||
ARMV = 7
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
||||
OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file
|
||||
SERIAL_LINK_ENABLE = yes
|
||||
VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
|
||||
LCD_ENABLE ?= yes
|
||||
LED_ENABLE ?= yes
|
||||
LCD_BACKLIGHT_ENABLE ?= yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
ifdef LCD_ENABLE
|
||||
include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
|
||||
endif
|
||||
|
||||
ifdef LED_ENABLE
|
||||
include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
|
||||
endif
|
||||
@ -0,0 +1,28 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= yes # Unicode
|
||||
@ -0,0 +1,66 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -0,0 +1,73 @@
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
|
||||
@ -1,3 +1,3 @@
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,73 @@
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
|
||||
@ -1,71 +1,3 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,67 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
@ -1,65 +1,3 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,65 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,89 @@
|
||||
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
# for avr upload
|
||||
USB ?= /dev/cu.usbmodem1421
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
ifdef TEENSY2
|
||||
OPT_DEFS += -DATREUS_TEENSY2
|
||||
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
||||
else
|
||||
OPT_DEFS += -DATREUS_ASTAR
|
||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
endif
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# MCU name
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
upload: build
|
||||
$(ATREUS_UPLOAD_COMMAND)
|
||||
|
||||
@ -0,0 +1,84 @@
|
||||
|
||||
|
||||
# project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
#OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# as per original hasu settings
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifneq (, $(findstring yes, $(HHKB_JP)))
|
||||
OPT_DEFS += -DHHKB_JP
|
||||
endif
|
||||
|
||||
debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
|
||||
debug-on: all
|
||||
|
||||
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
|
||||
debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
|
||||
debug-off: all
|
||||
@ -0,0 +1,3 @@
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -1,4 +1,4 @@
|
||||
#include "infinity_chibios.h"
|
||||
#include "infinity60.h"
|
||||
|
||||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Layer 0: Default Layer
|
||||
@ -1,4 +1,4 @@
|
||||
#include "infinity_chibios.h"
|
||||
#include "infinity60.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Layer 0: Default Layer
|
||||
@ -1,4 +1,4 @@
|
||||
#include "infinity_chibios.h"
|
||||
#include "infinity60.h"
|
||||
|
||||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Layer 0: Default Layer
|
||||
@ -0,0 +1,29 @@
|
||||
Infinity 60% keyboard firmware
|
||||
======================
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent readme](/).
|
||||
|
||||
## Keymaps
|
||||
|
||||
Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
|
||||
|
||||
|
||||
## Compiling
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/infinity60 folder. Once your dev env is setup, you'll be able to use the `make` command to both compile your keymap and flash it to your keyboard.
|
||||
|
||||
To just compile, which generates the output files in the `.build` folder at the root of the repository, run `make keymap`, where keymap is the name of the keymap that you want to compile.
|
||||
|
||||
## Flashing
|
||||
|
||||
To flash the firmware to the keyboard
|
||||
|
||||
1. First press the flash button on the bottom of the keyboard. If you already have a flah button mapped in a keyboard layout running on the keyboard, you can also use that.
|
||||
2. Then run `make keymap-dfu-util`, where keymap is the name of the keymap you want to flash. On Linux based operating systems you might need to run the comamnd as root, for example `sudo make keymap-dfu-util` on Ubuntu.
|
||||
|
||||
**Tip** `make keymap-dfu-util` will also compile the keymap if needed, so you can skip the compilation step if you want to.
|
||||
|
||||
@ -1,71 +1,3 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,67 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -0,0 +1,71 @@
|
||||
# project specific files
|
||||
SRC = led.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
@ -0,0 +1,73 @@
|
||||
|
||||
## Project specific files
|
||||
|
||||
SRC= matrix.c
|
||||
|
||||
# MCU name
|
||||
MCU = at90usb1286
|
||||
#MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=1024
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming
|
||||
CUSTOM_MATRIX=yes # need to do our own thing with the matrix
|
||||
@ -0,0 +1,72 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u2
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
CUSTOM_MATRIX = yes
|
||||
SRC += matrix.c
|
||||
@ -1,78 +1,3 @@
|
||||
SRC += matrix.c \
|
||||
i2c.c \
|
||||
split_util.c \
|
||||
serial.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= yes # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
CUSTOM_MATRIX = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,74 @@
|
||||
SRC += matrix.c \
|
||||
i2c.c \
|
||||
split_util.c \
|
||||
serial.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= yes # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
CUSTOM_MATRIX = yes
|
||||
@ -1,74 +1,3 @@
|
||||
|
||||
|
||||
SRC = led.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,69 @@
|
||||
|
||||
|
||||
SRC = led.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,74 +1,5 @@
|
||||
|
||||
SUBPROJECT_DEFAULT = rev4
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -1,5 +1,3 @@
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,5 @@
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -1,5 +1,3 @@
|
||||
AUDIO_ENABLE ?= yes # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,5 @@
|
||||
AUDIO_ENABLE ?= yes # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,67 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
@ -1,73 +1,3 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,69 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
@ -0,0 +1,68 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -0,0 +1,69 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
@ -1,70 +1,3 @@
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,66 @@
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -0,0 +1,70 @@
|
||||
|
||||
|
||||
SRC = matrix.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega16u2
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
CUSTOM_MATRIX = yes
|
||||
@ -0,0 +1,21 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
@ -0,0 +1,21 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
/**
|
||||
*TV44 keymap definition macro
|
||||
*/
|
||||
#define KEYMAP_TV44( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, \
|
||||
K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, \
|
||||
K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, \
|
||||
K37, K38, K39, K40, K41, K42, K43, K44 \
|
||||
) { \
|
||||
{ K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, }, \
|
||||
{ K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, }, \
|
||||
{ K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, }, \
|
||||
{ K37, K38, K39, K40, KC_NO, KC_NO, KC_NO, K41, K42, K43, KC_NO, K44 } \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,425 @@
|
||||
#include "tv44.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _QWERTY 0
|
||||
#define _COLEMAK 1
|
||||
#define _DVORAK 2
|
||||
#define _LOWER 3
|
||||
#define _RAISE 4
|
||||
#define _PLOVER 5
|
||||
#define _TOUCHCURSOR 6
|
||||
#define _MOUSECURSOR 7
|
||||
#define _ADJUST 16
|
||||
|
||||
// Keycodes
|
||||
enum planck_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
COLEMAK,
|
||||
DVORAK,
|
||||
PLOVER,
|
||||
LOWER,
|
||||
RAISE,
|
||||
BACKLIT,
|
||||
EXT_PLV
|
||||
};
|
||||
|
||||
enum macro_keycodes {
|
||||
KC_ALT_TAB,
|
||||
KC_CMD_TAB,
|
||||
KC_CTL_TAB,
|
||||
KC_CMD_SLSH,
|
||||
KC_AG_FIND,
|
||||
KC_AG_AGAIN,
|
||||
KC_AG_UNDO,
|
||||
KC_AG_CUT,
|
||||
KC_AG_COPY,
|
||||
KC_AG_PASTE,
|
||||
KC_AG_DESK_L,
|
||||
KC_AG_DESK_R,
|
||||
KC_AG_TAB_C,
|
||||
KC_AG_TAB_N,
|
||||
KC_AG_TAB_R,
|
||||
};
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
// Custom macros
|
||||
#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl
|
||||
#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift
|
||||
#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper
|
||||
#define GUI_SEM GUI_T(KC_SCLN) // Tap for Semicolon, hold for GUI
|
||||
#define ALT_QUO ALT_T(KC_QUOT) // Tap for Quote, hold for Alt
|
||||
// Requires KC_TRNS/_______ for the trigger key in the destination layer
|
||||
#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor
|
||||
#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor
|
||||
#define ALT_TAB M(KC_ALT_TAB) // Macro for Alt-Tab
|
||||
#define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab
|
||||
#define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab
|
||||
#define CMD_SLSH M(KC_CMD_SLSH) // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility)
|
||||
#define AG_FIND M(KC_AG_FIND) // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings
|
||||
#define AG_AGAIN M(KC_AG_AGAIN)
|
||||
#define AG_UNDO M(KC_AG_UNDO)
|
||||
#define AG_CUT M(KC_AG_CUT)
|
||||
#define AG_COPY M(KC_AG_COPY)
|
||||
#define AG_PASTE M(KC_AG_PASTE)
|
||||
#define AG_D_L M(KC_AG_DESK_L) // For Virtual Desktop Switching: Left, and
|
||||
#define AG_D_R M(KC_AG_DESK_R) // Right
|
||||
#define AG_T_C M(KC_AG_TAB_C) // For Chrome, etc. Tab Close,
|
||||
#define AG_T_N M(KC_AG_TAB_N) // Tab New, and
|
||||
#define AG_T_R M(KC_AG_TAB_R) // Tab Reopen Closed
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Qwerty
|
||||
*
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* |Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | Shift | Z | X | C | V | B | N | M | , | . | / | Sft/Ent |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol+ | Play |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*/
|
||||
[_QWERTY] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
CTL_ESC , KC_A, KC_S,LT_MC(KC_D), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, GUI_SEM, ALT_QUO ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLU , KC_MPLY ),
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
|
||||
/* Colemak
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* |Hyper/Tab| Q | W | F | P | G | J | L | U | Y | ; | Bksp |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | Ctrl/Esc | A | R | MC/S | T | D | H | N | E | I | O | " |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | Shift | Z | X | C | V | B | K | M | , | . | / | Sft/Ent |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol+ | Play |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*/
|
||||
[_COLEMAK] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
CTL_ESC , KC_A, KC_R,LT_MC(KC_S), KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLU , KC_MPLY ),
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
|
||||
/* Dvorak
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* |Hyper/Tab| " | , | . | P | Y | F | G | C | R | L | Bksp |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | Ctrl/Esc | A | O | MC/E | U | I | D | H | T | N | S | / |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | Shift | ; | Q | J | K | X | B | M | W | V | Z | Sft/Ent |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol+ | Play |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*/
|
||||
[_DVORAK] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
HPR_TAB,KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
CTL_ESC , KC_A, KC_O,LT_MC(KC_E), KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
KC_LSFT , KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
KC_LALT , KC_LGUI , LOWER , LT_TC , LT_TC , RAISE , KC_VOLU , KC_MPLY ),
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
|
||||
/* Lower
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | [ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | "|" |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | ] | F7 | F8 | F9 | F10 | F11 | F12 | - | = | [ | ] | \ |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | Brite | | | | | | Vol- | Mute |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
KC_TILD,KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
KC_LBRC , KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
KC_RBRC , KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
BACKLIT , _______ , _______ , _______ , _______ , _______ , KC_VOLD , KC_MUTE ),
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
|
||||
/* Raise
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | "|" |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | Brite | | | | | | Vol- | Mute |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
KC_0 , KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
KC_DLR , KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_DOT, KC_4, KC_5, KC_6, KC_ASTR, KC_PIPE ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
KC_EQL , KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_DOT, KC_1, KC_2, KC_3, KC_SLSH, KC_BSLS ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
BACKLIT , _______ , _______ , _______ , _______ , _______ , KC_VOLD , KC_MUTE ),
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
|
||||
/* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* | AltTab |CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L| Desk_R |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | | | | | | | | |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*
|
||||
* The KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND, and KC_AGAIN keycodes don't
|
||||
* seem to work on Mac. Presumably they'll work under Windows.
|
||||
*/
|
||||
|
||||
[_TOUCHCURSOR] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
ALT_TAB,CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______ ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
_______ ,KC_LALT, KC_SPC, AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, AG_D_L, AG_D_R ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
_______ ,AG_UNDO, AG_CUT, AG_COPY,AG_PASTE, KC_GRV, KC_PGDN, KC_DEL, AG_T_N, AG_T_R,CMD_SLSH, _______ ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
_______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ ),
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
|
||||
/* Mouse Layer
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | | | | | | | | |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*/
|
||||
|
||||
[_MOUSECURSOR] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
_______,_______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______ ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
_______ ,KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4, KC_BTN5 ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
_______ ,_______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3, _______ ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
_______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ ),
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
|
||||
/* Plover layer (http://opensteno.org)
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* | # | # | # | # | # | # | # | # | # | # | # | # |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | | S | T | P | H | * | * | F | P | L | T | D |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | TogOut | S | K | W | R | * | * | R | B | G | S | Z |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | Exit | A | O | | | E | U | |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*/
|
||||
|
||||
[_PLOVER] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
KC_1 , KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
XXXXXXX , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
XXXXXXX , KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
EXT_PLV , KC_C , KC_V , XXXXXXX , XXXXXXX , KC_N , KC_M , XXXXXXX ),
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
|
||||
/* Adjust (Lower + Raise)
|
||||
* ,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
* | | | | | | | | | | | | Del |
|
||||
* |---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
* | | | | | |AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| |
|
||||
* |----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
* | | | | | | | | Reset |
|
||||
* `--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
*/
|
||||
[_ADJUST] = KEYMAP_TV44(
|
||||
/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/
|
||||
_______,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL ,
|
||||
/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/
|
||||
_______ ,_______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______ ,
|
||||
/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
|
||||
_______ ,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ,
|
||||
/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
|
||||
_______ , _______ , _______ , _______ , _______ , _______ , _______ , RESET )
|
||||
/*`-----------+---------------+---------+-------^^^------+-------^^^-------+---------+-----------------+--------------'*/
|
||||
};
|
||||
|
||||
void persistant_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
default_layer_set(1UL<<_QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case COLEMAK:
|
||||
if (record->event.pressed) {
|
||||
default_layer_set(1UL<<_COLEMAK);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case DVORAK:
|
||||
if (record->event.pressed) {
|
||||
default_layer_set(1UL<<_DVORAK);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case BACKLIT:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
backlight_step();
|
||||
#endif
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case PLOVER:
|
||||
if (record->event.pressed) {
|
||||
layer_off(_RAISE);
|
||||
layer_off(_LOWER);
|
||||
layer_off(_ADJUST);
|
||||
layer_on(_PLOVER);
|
||||
if (!eeconfig_is_enabled()) {
|
||||
eeconfig_init();
|
||||
}
|
||||
keymap_config.raw = eeconfig_read_keymap();
|
||||
keymap_config.nkro = 1;
|
||||
eeconfig_update_keymap(keymap_config.raw);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case EXT_PLV:
|
||||
if (record->event.pressed) {
|
||||
layer_off(_PLOVER);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
/*
|
||||
* Macro definition
|
||||
*/
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
if (!eeconfig_is_enabled()) {
|
||||
eeconfig_init();
|
||||
}
|
||||
|
||||
bool use_cmd = true; // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc.
|
||||
// Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in:
|
||||
// quantum/quantum.c
|
||||
if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) {
|
||||
use_cmd = false; // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc.
|
||||
}
|
||||
|
||||
switch (id) {
|
||||
case KC_ALT_TAB:
|
||||
if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); }
|
||||
else { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); }
|
||||
case KC_CMD_TAB:
|
||||
if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); }
|
||||
else { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); }
|
||||
|
||||
case KC_CTL_TAB:
|
||||
return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END ));
|
||||
case KC_CMD_SLSH:
|
||||
return (record->event.pressed ? MACRO( D(LGUI), D(SLSH),END ) : MACRO( U(SLSH),END ));
|
||||
|
||||
case KC_AG_FIND:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END );
|
||||
case KC_AG_AGAIN:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END );
|
||||
case KC_AG_UNDO:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END );
|
||||
case KC_AG_CUT:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END );
|
||||
case KC_AG_COPY:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END );
|
||||
case KC_AG_PASTE:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END );
|
||||
|
||||
case KC_AG_DESK_L:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END );
|
||||
case KC_AG_DESK_R:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END );
|
||||
|
||||
case KC_AG_TAB_C:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), T(W), END ) : MACRODOWN( D(LCTRL), T(W), END );
|
||||
case KC_AG_TAB_N:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), T(T), END ) : MACRODOWN( D(LCTRL), T(T), END );
|
||||
case KC_AG_TAB_R:
|
||||
return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END );
|
||||
}
|
||||
|
||||
return MACRO_NONE;
|
||||
}
|
||||
@ -0,0 +1,129 @@
|
||||
jeebak's TV44 layout
|
||||
=======================
|
||||
NOTE: This is a port of jeebak's planck layout, for tv44.
|
||||
|
||||
This WIP keymap attempts to minimize fingers straying away from the home row.
|
||||
To aid in this endeavor, when additional modifyer keys to switch layers are
|
||||
needed, they will be mapped to home row keys. The `keymap.c` file will contain
|
||||
the exact changes. The diagrams in this README shows the highlights of the
|
||||
changes from the default mappings.
|
||||
|
||||
I also decided to change all calls to `persistant_default_layer_set()` to
|
||||
`default_layer_set()` since this is my personal perference.
|
||||
|
||||
## Macros
|
||||
```
|
||||
#define ALT_TAB M(KC_ALT_TAB)
|
||||
```
|
||||
|
||||
## Base Layers (Qwerty/Colemak/Dvorak)
|
||||
These base layers are mostly the same as the default mappings. The interesting
|
||||
changes are shown below.
|
||||
|
||||
- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held,
|
||||
- `GUI/;` as `;` and `GUI`,
|
||||
- `Alt/"` as `"` and `Alt`,
|
||||
- `Sft/Ent` as `Enter` and `Shift`, and
|
||||
- `Hyper/Tab` as `Tab` and `Hyper`
|
||||
|
||||
A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped.
|
||||
The arrow keys, which have been moved to the
|
||||
[TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been
|
||||
replaced with the Media keys as shown. The `MC/kc` key activates the
|
||||
`MouseCursor` layer when held, and emits the corresponding `kc` for its layer,
|
||||
when tapped.
|
||||
```
|
||||
,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
|Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp |
|
||||
|---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
| Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" |
|
||||
|----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
| Shift | Z | X | C | V | B | N | M | , | . | / | Sft/Ent |
|
||||
|-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
| Alt | GUI | Lower | TC/Space | TC/Space | Raise | Vol+ | Play |
|
||||
`--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
```
|
||||
|
||||
## Lower Layer (Symbols and Function Keys)
|
||||
The symbols and functions keys are essentially the same as the default mapping.
|
||||
The most notable changes are that the symbol keys from the `RAISE` layer have
|
||||
been moved here. The remaining Media keys replace those that are now on the
|
||||
base layers. The `BACKLIT` key has also been moved here.
|
||||
```
|
||||
,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
| ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
|
||||
|---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
| [ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | "|" |
|
||||
|----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
| ] | F7 | F8 | F9 | F10 | F11 | F12 | - | = | [ | ] | \ |
|
||||
|-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
| Brite | | | | | | Vol- | Mute |
|
||||
`--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
```
|
||||
|
||||
## Raise Layer (Numbers and Arithmetic Operators)
|
||||
All of the numbers and arithmetic operators are available on this layer. Some
|
||||
keys are duplicated for the convenience of their positions. The `0` and `$`
|
||||
keys at the far left are for quick access to beginning and end of line in vim.
|
||||
```
|
||||
,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
|
||||
|---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
| $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | "|" |
|
||||
|----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
| = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ |
|
||||
|-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
| Brite | | | | | | Vol- | Mute |
|
||||
`--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
```
|
||||
|
||||
## TouchCursor layer plus personal customizations
|
||||
[TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key
|
||||
as the modifier, with the `IJKL` home row keys representing the inverted-T of
|
||||
the arrow keys. All of the default TouchCursor keymappings for the right hand
|
||||
are represented below. My personalizations include all of the keys shown for
|
||||
the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key
|
||||
from the base layers) readily accessible from the home row allows quick word
|
||||
jumps and highlighting when used in conjunction with the arrow keys. The
|
||||
`Alt-Tab` macro is not only useful under Windows, but also under Mac when used
|
||||
with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch).
|
||||
The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in
|
||||
this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN`
|
||||
keycodes do not seem to work. There are macros in place that'll "automatically"
|
||||
choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`,
|
||||
etc.) depending on which layout you've currently selected (`AG_NORM` or
|
||||
`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I
|
||||
use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and
|
||||
`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as
|
||||
Google Chrome.
|
||||
```
|
||||
,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
| AltTab |CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | |
|
||||
|---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
| | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L| Desk_R |
|
||||
|----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
| | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| |
|
||||
|-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
| | | | | | | | |
|
||||
`--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
```
|
||||
|
||||
## Mouse Layer
|
||||
The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer.
|
||||
The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the
|
||||
mouse from the `doc/keycode.txt` file are represented, and logically located,
|
||||
IMHO. The left and right click buttons are duplicated; on the right hand side,
|
||||
for a quick click here and there, and again on the left hand side for when the
|
||||
buttons need to be held for dragging things or highlighting text, thus allowing
|
||||
the right hand to be free to use the up/down/left/right actions.
|
||||
```
|
||||
,---------+------+------+------+------+------+------+------+------+------+------+-------------.
|
||||
| | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | |
|
||||
|---------`------`------`------`------`------`------`------`------`------`------`-------------|
|
||||
| |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 |
|
||||
|----------`------`------`------`------`------`------`------`------`------`------`------------|
|
||||
| | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | |
|
||||
|-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
|
||||
| | | | | | | | |
|
||||
`--------+---------+---------+------^^^-------+-----^^^--------+---------+---------+---------'
|
||||
```
|
||||
@ -0,0 +1,69 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
@ -0,0 +1,70 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
MCU = at90usb1286
|
||||
# MCU = at90usb1287
|
||||
# MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=1024
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
@ -0,0 +1 @@
|
||||
Subproject commit ec44c6c1675c25b9827aacd08c02433cccde7780
|
||||
@ -0,0 +1,79 @@
|
||||
COLOR ?= true
|
||||
|
||||
ifeq ($(COLOR),true)
|
||||
NO_COLOR=\033[0m
|
||||
OK_COLOR=\033[32;01m
|
||||
ERROR_COLOR=\033[31;01m
|
||||
WARN_COLOR=\033[33;01m
|
||||
BLUE=\033[0;34m
|
||||
BOLD=\033[1m
|
||||
endif
|
||||
|
||||
ifneq ($(shell awk --version 2>/dev/null),)
|
||||
AWK=awk
|
||||
else
|
||||
AWK=cat && test
|
||||
endif
|
||||
|
||||
ON_ERROR ?= exit 1
|
||||
|
||||
OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
|
||||
ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
|
||||
WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
|
||||
|
||||
TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
|
||||
TAB_LOG_PLAIN = printf "$$LOG\n"
|
||||
AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
|
||||
AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
|
||||
PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && $(ON_ERROR)
|
||||
PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
|
||||
PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && $(ON_ERROR)
|
||||
PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
|
||||
PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
|
||||
BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
|
||||
MAKE_MSG_FORMAT = $(AWK) '{ printf "%-118s", $$0;}'
|
||||
|
||||
# Define Messages
|
||||
# English
|
||||
MSG_ERRORS_NONE = Errors: none
|
||||
MSG_ERRORS = $(ERROR_COLOR)Make finished with errors\n$(NO_COLOR)
|
||||
MSG_BEGIN = -------- begin --------
|
||||
MSG_END = -------- end --------
|
||||
MSG_SIZE_BEFORE = Size before:
|
||||
MSG_SIZE_AFTER = Size after:
|
||||
MSG_COFF = Converting to AVR COFF:
|
||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
||||
MSG_FLASH = Creating load file for Flash:
|
||||
MSG_EEPROM = Creating load file for EEPROM:
|
||||
MSG_BIN = Creating binary load file for Flash:
|
||||
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
||||
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
||||
MSG_LINKING = Linking:
|
||||
MSG_COMPILING = Compiling:
|
||||
MSG_COMPILING_CPP = Compiling:
|
||||
MSG_ASSEMBLING = Assembling:
|
||||
MSG_CLEANING = Cleaning project:
|
||||
MSG_CREATING_LIBRARY = Creating library:
|
||||
MSG_SUBMODULE_DIRTY = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
|
||||
Some git sub-modules are out of date or modified, please consider runnning:$(BOLD)\n\
|
||||
git submodule sync --recursive\n\
|
||||
git submodule update --init --recursive$(NO_COLOR)\n\n\
|
||||
You can ignore this warning if you are not compiling any ChibiOS keyboards,\n\
|
||||
or if you have modified the ChibiOS libraries yourself. \n\n
|
||||
MSG_NO_CMP = $(ERROR_COLOR)Error:$(NO_COLOR)$(BOLD) cmp command not found, please install diffutils\n$(NO_COLOR)
|
||||
|
||||
define GENERATE_MSG_MAKE_KB
|
||||
MSG_MAKE_KB_ACTUAL := Making $$(KB_SP) with keymap $(BOLD)$$(CURRENT_KM)$(NO_COLOR)
|
||||
ifneq ($$(MAKE_TARGET),)
|
||||
MSG_MAKE_KB_ACTUAL += and target $(BOLD)$$(MAKE_TARGET)$(NO_COLOR)
|
||||
endif
|
||||
endef
|
||||
MSG_MAKE_KB = $(eval $(call GENERATE_MSG_MAKE_KB))$(MSG_MAKE_KB_ACTUAL)
|
||||
define GENERATE_MSG_MAKE_TEST
|
||||
MSG_MAKE_TEST_ACTUAL := Making test $(BOLD)$(TEST_NAME)$(NO_COLOR)
|
||||
ifneq ($$(MAKE_TARGET),)
|
||||
MSG_MAKE_TEST_ACTUAL += with target $(BOLD)$$(MAKE_TARGET)$(NO_COLOR)
|
||||
endif
|
||||
endef
|
||||
MSG_MAKE_TEST = $(eval $(call GENERATE_MSG_MAKE_TEST))$(MSG_MAKE_TEST_ACTUAL)
|
||||
MSG_TEST = Testing $(BOLD)$(TEST_NAME)$(NO_COLOR)
|
||||
@ -1,231 +0,0 @@
|
||||
/*
|
||||
The MIT License (MIT)
|
||||
|
||||
Copyright (c) 2016 Fred Sundvik
|
||||
|
||||
Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
of this software and associated documentation files (the "Software"), to deal
|
||||
in the Software without restriction, including without limitation the rights
|
||||
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
copies of the Software, and to permit persons to whom the Software is
|
||||
furnished to do so, subject to the following conditions:
|
||||
|
||||
The above copyright notice and this permission notice shall be included in all
|
||||
copies or substantial portions of the Software.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <cgreen/cgreen.h>
|
||||
#include <cgreen/mocks.h>
|
||||
#include "serial_link/protocol/byte_stuffer.c"
|
||||
#include "serial_link/protocol/frame_validator.c"
|
||||
#include "serial_link/protocol/frame_router.c"
|
||||
#include "serial_link/protocol/transport.h"
|
||||
|
||||
static uint8_t received_data[256];
|
||||
static uint16_t received_data_size;
|
||||
|
||||
typedef struct {
|
||||
uint8_t sent_data[256];
|
||||
uint16_t sent_data_size;
|
||||
} receive_buffer_t;
|
||||
|
||||
typedef struct {
|
||||
receive_buffer_t send_buffers[2];
|
||||
} router_buffer_t;
|
||||
|
||||
router_buffer_t router_buffers[8];
|
||||
|
||||
router_buffer_t* current_router_buffer;
|
||||
|
||||
|
||||
Describe(FrameRouter);
|
||||
BeforeEach(FrameRouter) {
|
||||
init_byte_stuffer();
|
||||
memset(router_buffers, 0, sizeof(router_buffers));
|
||||
current_router_buffer = 0;
|
||||
}
|
||||
AfterEach(FrameRouter) {}
|
||||
|
||||
typedef struct {
|
||||
uint32_t data;
|
||||
uint8_t extra[16];
|
||||
} frame_buffer_t;
|
||||
|
||||
|
||||
void send_data(uint8_t link, const uint8_t* data, uint16_t size) {
|
||||
receive_buffer_t* buffer = ¤t_router_buffer->send_buffers[link];
|
||||
memcpy(buffer->sent_data + buffer->sent_data_size, data, size);
|
||||
buffer->sent_data_size += size;
|
||||
}
|
||||
|
||||
static void receive_data(uint8_t link, uint8_t* data, uint16_t size) {
|
||||
int i;
|
||||
for(i=0;i<size;i++) {
|
||||
byte_stuffer_recv_byte(link, data[i]);
|
||||
}
|
||||
}
|
||||
|
||||
static void activate_router(uint8_t num) {
|
||||
current_router_buffer = router_buffers + num;
|
||||
router_set_master(num==0);
|
||||
}
|
||||
|
||||
static void simulate_transport(uint8_t from, uint8_t to) {
|
||||
activate_router(to);
|
||||
if (from > to) {
|
||||
receive_data(DOWN_LINK,
|
||||
router_buffers[from].send_buffers[UP_LINK].sent_data,
|
||||
router_buffers[from].send_buffers[UP_LINK].sent_data_size);
|
||||
}
|
||||
else if(to > from) {
|
||||
receive_data(UP_LINK,
|
||||
router_buffers[from].send_buffers[DOWN_LINK].sent_data,
|
||||
router_buffers[from].send_buffers[DOWN_LINK].sent_data_size);
|
||||
}
|
||||
}
|
||||
|
||||
void transport_recv_frame(uint8_t from, uint8_t* data, uint16_t size) {
|
||||
mock(from, data, size);
|
||||
}
|
||||
|
||||
|
||||
Ensure(FrameRouter, master_broadcast_is_received_by_everyone) {
|
||||
frame_buffer_t data;
|
||||
data.data = 0xAB7055BB;
|
||||
activate_router(0);
|
||||
router_send_frame(0xFF, (uint8_t*)&data, 4);
|
||||
assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
expect(transport_recv_frame,
|
||||
when(from, is_equal_to(0)),
|
||||
when(size, is_equal_to(4)),
|
||||
when(data, is_equal_to_contents_of(&data.data, 4))
|
||||
);
|
||||
simulate_transport(0, 1);
|
||||
assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
expect(transport_recv_frame,
|
||||
when(from, is_equal_to(0)),
|
||||
when(size, is_equal_to(4)),
|
||||
when(data, is_equal_to_contents_of(&data.data, 4))
|
||||
);
|
||||
simulate_transport(1, 2);
|
||||
assert_that(router_buffers[2].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[2].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
}
|
||||
|
||||
Ensure(FrameRouter, master_send_is_received_by_targets) {
|
||||
frame_buffer_t data;
|
||||
data.data = 0xAB7055BB;
|
||||
activate_router(0);
|
||||
router_send_frame((1 << 1) | (1 << 2), (uint8_t*)&data, 4);
|
||||
assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
simulate_transport(0, 1);
|
||||
assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
expect(transport_recv_frame,
|
||||
when(from, is_equal_to(0)),
|
||||
when(size, is_equal_to(4)),
|
||||
when(data, is_equal_to_contents_of(&data.data, 4))
|
||||
);
|
||||
simulate_transport(1, 2);
|
||||
assert_that(router_buffers[2].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[2].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
expect(transport_recv_frame,
|
||||
when(from, is_equal_to(0)),
|
||||
when(size, is_equal_to(4)),
|
||||
when(data, is_equal_to_contents_of(&data.data, 4))
|
||||
);
|
||||
simulate_transport(2, 3);
|
||||
assert_that(router_buffers[3].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[3].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
}
|
||||
|
||||
Ensure(FrameRouter, first_link_sends_to_master) {
|
||||
frame_buffer_t data;
|
||||
data.data = 0xAB7055BB;
|
||||
activate_router(1);
|
||||
router_send_frame(0, (uint8_t*)&data, 4);
|
||||
assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
expect(transport_recv_frame,
|
||||
when(from, is_equal_to(1)),
|
||||
when(size, is_equal_to(4)),
|
||||
when(data, is_equal_to_contents_of(&data.data, 4))
|
||||
);
|
||||
simulate_transport(1, 0);
|
||||
assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
}
|
||||
|
||||
Ensure(FrameRouter, second_link_sends_to_master) {
|
||||
frame_buffer_t data;
|
||||
data.data = 0xAB7055BB;
|
||||
activate_router(2);
|
||||
router_send_frame(0, (uint8_t*)&data, 4);
|
||||
assert_that(router_buffers[2].send_buffers[UP_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[2].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
simulate_transport(2, 1);
|
||||
assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
expect(transport_recv_frame,
|
||||
when(from, is_equal_to(2)),
|
||||
when(size, is_equal_to(4)),
|
||||
when(data, is_equal_to_contents_of(&data.data, 4))
|
||||
);
|
||||
simulate_transport(1, 0);
|
||||
assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
}
|
||||
|
||||
Ensure(FrameRouter, master_sends_to_master_does_nothing) {
|
||||
frame_buffer_t data;
|
||||
data.data = 0xAB7055BB;
|
||||
activate_router(0);
|
||||
router_send_frame(0, (uint8_t*)&data, 4);
|
||||
assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
}
|
||||
|
||||
Ensure(FrameRouter, link_sends_to_other_link_does_nothing) {
|
||||
frame_buffer_t data;
|
||||
data.data = 0xAB7055BB;
|
||||
activate_router(1);
|
||||
router_send_frame(2, (uint8_t*)&data, 4);
|
||||
assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
}
|
||||
|
||||
Ensure(FrameRouter, master_receives_on_uplink_does_nothing) {
|
||||
frame_buffer_t data;
|
||||
data.data = 0xAB7055BB;
|
||||
activate_router(1);
|
||||
router_send_frame(0, (uint8_t*)&data, 4);
|
||||
assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_greater_than(0));
|
||||
assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
|
||||
never_expect(transport_recv_frame);
|
||||
activate_router(0);
|
||||
receive_data(UP_LINK,
|
||||
router_buffers[1].send_buffers[UP_LINK].sent_data,
|
||||
router_buffers[1].send_buffers[UP_LINK].sent_data_size);
|
||||
assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0));
|
||||
assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0));
|
||||
}
|
||||
@ -0,0 +1,229 @@
|
||||
/*
|
||||
The MIT License (MIT)
|
||||
|
||||
Copyright (c) 2016 Fred Sundvik
|
||||
|
||||
Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
of this software and associated documentation files (the "Software"), to deal
|
||||
in the Software without restriction, including without limitation the rights
|
||||
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
copies of the Software, and to permit persons to whom the Software is
|
||||
furnished to do so, subject to the following conditions:
|
||||
|
||||
The above copyright notice and this permission notice shall be included in all
|
||||
copies or substantial portions of the Software.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "gtest/gtest.h"
|
||||
#include "gmock/gmock.h"
|
||||
#include <array>
|
||||
extern "C" {
|
||||
#include "serial_link/protocol/transport.h"
|
||||
#include "serial_link/protocol/byte_stuffer.h"
|
||||
#include "serial_link/protocol/frame_router.h"
|
||||
}
|
||||
|
||||
using testing::_;
|
||||
using testing::ElementsAreArray;
|
||||
using testing::Args;
|
||||
|
||||
class FrameRouter : public testing::Test {
|
||||
public:
|
||||
FrameRouter() :
|
||||
current_router_buffer(nullptr)
|
||||
{
|
||||
Instance = this;
|
||||
init_byte_stuffer();
|
||||
}
|
||||
|
||||
~FrameRouter() {
|
||||
Instance = nullptr;
|
||||
}
|
||||
|
||||
void send_data(uint8_t link, const uint8_t* data, uint16_t size) {
|
||||
auto& buffer = current_router_buffer->send_buffers[link];
|
||||
std::copy(data, data + size, std::back_inserter(buffer));
|
||||
}
|
||||
|
||||
void receive_data(uint8_t link, uint8_t* data, uint16_t size) {
|
||||
int i;
|
||||
for(i=0;i<size;i++) {
|
||||
byte_stuffer_recv_byte(link, data[i]);
|
||||
}
|
||||
}
|
||||
|
||||
void activate_router(uint8_t num) {
|
||||
current_router_buffer = router_buffers + num;
|
||||
router_set_master(num==0);
|
||||
}
|
||||
|
||||
void simulate_transport(uint8_t from, uint8_t to) {
|
||||
activate_router(to);
|
||||
if (from > to) {
|
||||
receive_data(DOWN_LINK,
|
||||
router_buffers[from].send_buffers[UP_LINK].data(),
|
||||
router_buffers[from].send_buffers[UP_LINK].size());
|
||||
}
|
||||
else if(to > from) {
|
||||
receive_data(UP_LINK,
|
||||
router_buffers[from].send_buffers[DOWN_LINK].data(),
|
||||
router_buffers[from].send_buffers[DOWN_LINK].size());
|
||||
}
|
||||
}
|
||||
|
||||
MOCK_METHOD3(transport_recv_frame, void (uint8_t from, uint8_t* data, uint16_t size));
|
||||
|
||||
std::vector<uint8_t> received_data;
|
||||
|
||||
struct router_buffer {
|
||||
std::vector<uint8_t> send_buffers[2];
|
||||
};
|
||||
|
||||
router_buffer router_buffers[8];
|
||||
router_buffer* current_router_buffer;
|
||||
|
||||
static FrameRouter* Instance;
|
||||
};
|
||||
|
||||
FrameRouter* FrameRouter::Instance = nullptr;
|
||||
|
||||
|
||||
typedef struct {
|
||||
std::array<uint8_t, 4> data;
|
||||
uint8_t extra[16];
|
||||
} frame_buffer_t;
|
||||
|
||||
|
||||
extern "C" {
|
||||
void send_data(uint8_t link, const uint8_t* data, uint16_t size) {
|
||||
FrameRouter::Instance->send_data(link, data, size);
|
||||
}
|
||||
|
||||
|
||||
void transport_recv_frame(uint8_t from, uint8_t* data, uint16_t size) {
|
||||
FrameRouter::Instance->transport_recv_frame(from, data, size);
|
||||
}
|
||||
}
|
||||
|
||||
TEST_F(FrameRouter, master_broadcast_is_received_by_everyone) {
|
||||
frame_buffer_t data;
|
||||
data.data = {0xAB, 0x70, 0x55, 0xBB};
|
||||
activate_router(0);
|
||||
router_send_frame(0xFF, (uint8_t*)&data, 4);
|
||||
EXPECT_GT(router_buffers[0].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0);
|
||||
EXPECT_CALL(*this, transport_recv_frame(0, _, _))
|
||||
.With(Args<1, 2>(ElementsAreArray(data.data)));
|
||||
simulate_transport(0, 1);
|
||||
EXPECT_GT(router_buffers[1].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[1].send_buffers[UP_LINK].size(), 0);
|
||||
|
||||
EXPECT_CALL(*this, transport_recv_frame(0, _, _))
|
||||
.With(Args<1, 2>(ElementsAreArray(data.data)));
|
||||
simulate_transport(1, 2);
|
||||
EXPECT_GT(router_buffers[2].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[2].send_buffers[UP_LINK].size(), 0);
|
||||
}
|
||||
|
||||
TEST_F(FrameRouter, master_send_is_received_by_targets) {
|
||||
frame_buffer_t data;
|
||||
data.data = {0xAB, 0x70, 0x55, 0xBB};
|
||||
activate_router(0);
|
||||
router_send_frame((1 << 1) | (1 << 2), (uint8_t*)&data, 4);
|
||||
EXPECT_GT(router_buffers[0].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0);
|
||||
|
||||
simulate_transport(0, 1);
|
||||
EXPECT_GT(router_buffers[1].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[1].send_buffers[UP_LINK].size(), 0);
|
||||
|
||||
EXPECT_CALL(*this, transport_recv_frame(0, _, _))
|
||||
.With(Args<1, 2>(ElementsAreArray(data.data)));
|
||||
simulate_transport(1, 2);
|
||||
EXPECT_GT(router_buffers[2].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[2].send_buffers[UP_LINK].size(), 0);
|
||||
|
||||
EXPECT_CALL(*this, transport_recv_frame(0, _, _))
|
||||
.With(Args<1, 2>(ElementsAreArray(data.data)));
|
||||
simulate_transport(2, 3);
|
||||
EXPECT_GT(router_buffers[3].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[3].send_buffers[UP_LINK].size(), 0);
|
||||
}
|
||||
|
||||
TEST_F(FrameRouter, first_link_sends_to_master) {
|
||||
frame_buffer_t data;
|
||||
data.data = {0xAB, 0x70, 0x55, 0xBB};
|
||||
activate_router(1);
|
||||
router_send_frame(0, (uint8_t*)&data, 4);
|
||||
EXPECT_GT(router_buffers[1].send_buffers[UP_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[1].send_buffers[DOWN_LINK].size(), 0);
|
||||
|
||||
EXPECT_CALL(*this, transport_recv_frame(1, _, _))
|
||||
.With(Args<1, 2>(ElementsAreArray(data.data)));
|
||||
simulate_transport(1, 0);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0);
|
||||
}
|
||||
|
||||
TEST_F(FrameRouter, second_link_sends_to_master) {
|
||||
frame_buffer_t data;
|
||||
data.data = {0xAB, 0x70, 0x55, 0xBB};
|
||||
activate_router(2);
|
||||
router_send_frame(0, (uint8_t*)&data, 4);
|
||||
EXPECT_GT(router_buffers[2].send_buffers[UP_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[2].send_buffers[DOWN_LINK].size(), 0);
|
||||
|
||||
simulate_transport(2, 1);
|
||||
EXPECT_GT(router_buffers[1].send_buffers[UP_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[1].send_buffers[DOWN_LINK].size(), 0);
|
||||
|
||||
EXPECT_CALL(*this, transport_recv_frame(2, _, _))
|
||||
.With(Args<1, 2>(ElementsAreArray(data.data)));
|
||||
simulate_transport(1, 0);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[DOWN_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0);
|
||||
}
|
||||
|
||||
TEST_F(FrameRouter, master_sends_to_master_does_nothing) {
|
||||
frame_buffer_t data;
|
||||
data.data = {0xAB, 0x70, 0x55, 0xBB};
|
||||
activate_router(0);
|
||||
router_send_frame(0, (uint8_t*)&data, 4);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[DOWN_LINK].size(), 0);
|
||||
}
|
||||
|
||||
TEST_F(FrameRouter, link_sends_to_other_link_does_nothing) {
|
||||
frame_buffer_t data;
|
||||
data.data = {0xAB, 0x70, 0x55, 0xBB};
|
||||
activate_router(1);
|
||||
router_send_frame(2, (uint8_t*)&data, 4);
|
||||
EXPECT_EQ(router_buffers[1].send_buffers[UP_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[1].send_buffers[DOWN_LINK].size(), 0);
|
||||
}
|
||||
|
||||
TEST_F(FrameRouter, master_receives_on_uplink_does_nothing) {
|
||||
frame_buffer_t data;
|
||||
data.data = {0xAB, 0x70, 0x55, 0xBB};
|
||||
activate_router(1);
|
||||
router_send_frame(0, (uint8_t*)&data, 4);
|
||||
EXPECT_GT(router_buffers[1].send_buffers[UP_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[1].send_buffers[DOWN_LINK].size(), 0);
|
||||
|
||||
EXPECT_CALL(*this, transport_recv_frame(_, _, _))
|
||||
.Times(0);
|
||||
activate_router(0);
|
||||
receive_data(UP_LINK,
|
||||
router_buffers[1].send_buffers[UP_LINK].data(),
|
||||
router_buffers[1].send_buffers[UP_LINK].size());
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0);
|
||||
EXPECT_EQ(router_buffers[0].send_buffers[DOWN_LINK].size(), 0);
|
||||
}
|
||||
@ -0,0 +1,22 @@
|
||||
serial_link_byte_stuffer_SRC :=\
|
||||
$(SERIAL_PATH)/tests/byte_stuffer_tests.cpp \
|
||||
$(SERIAL_PATH)/protocol/byte_stuffer.c
|
||||
|
||||
serial_link_frame_validator_SRC := \
|
||||
$(SERIAL_PATH)/tests/frame_validator_tests.cpp \
|
||||
$(SERIAL_PATH)/protocol/frame_validator.c
|
||||
|
||||
serial_link_frame_router_SRC := \
|
||||
$(SERIAL_PATH)/tests/frame_router_tests.cpp \
|
||||
$(SERIAL_PATH)/protocol/byte_stuffer.c \
|
||||
$(SERIAL_PATH)/protocol/frame_validator.c \
|
||||
$(SERIAL_PATH)/protocol/frame_router.c
|
||||
|
||||
serial_link_triple_buffered_object_SRC := \
|
||||
$(SERIAL_PATH)/tests/triple_buffered_object_tests.cpp \
|
||||
$(SERIAL_PATH)/protocol/triple_buffered_object.c
|
||||
|
||||
serial_link_transport_SRC := \
|
||||
$(SERIAL_PATH)/tests/transport_tests.cpp \
|
||||
$(SERIAL_PATH)/protocol/transport.c \
|
||||
$(SERIAL_PATH)/protocol/triple_buffered_object.c
|
||||
@ -0,0 +1,6 @@
|
||||
TEST_LIST +=\
|
||||
serial_link_byte_stuffer\
|
||||
serial_link_frame_validator\
|
||||
serial_link_frame_router\
|
||||
serial_link_triple_buffered_object\
|
||||
serial_link_transport
|
||||
@ -1,168 +0,0 @@
|
||||
/*
|
||||
The MIT License (MIT)
|
||||
|
||||
Copyright (c) 2016 Fred Sundvik
|
||||
|
||||
Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
of this software and associated documentation files (the "Software"), to deal
|
||||
in the Software without restriction, including without limitation the rights
|
||||
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
copies of the Software, and to permit persons to whom the Software is
|
||||
furnished to do so, subject to the following conditions:
|
||||
|
||||
The above copyright notice and this permission notice shall be included in all
|
||||
copies or substantial portions of the Software.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <cgreen/cgreen.h>
|
||||
#include <cgreen/mocks.h>
|
||||
#include "serial_link/protocol/transport.c"
|
||||
#include "serial_link/protocol/triple_buffered_object.c"
|
||||
|
||||
void signal_data_written(void) {
|
||||
mock();
|
||||
}
|
||||
|
||||
static uint8_t sent_data[2048];
|
||||
static uint16_t sent_data_size;
|
||||
|
||||
void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size) {
|
||||
mock(destination);
|
||||
memcpy(sent_data + sent_data_size, data, size);
|
||||
sent_data_size += size;
|
||||
}
|
||||
|
||||
typedef struct {
|
||||
uint32_t test;
|
||||
} test_object1_t;
|
||||
|
||||
typedef struct {
|
||||
uint32_t test1;
|
||||
uint32_t test2;
|
||||
} test_object2_t;
|
||||
|
||||
MASTER_TO_ALL_SLAVES_OBJECT(master_to_slave, test_object1_t);
|
||||
MASTER_TO_SINGLE_SLAVE_OBJECT(master_to_single_slave, test_object1_t);
|
||||
SLAVE_TO_MASTER_OBJECT(slave_to_master, test_object1_t);
|
||||
|
||||
static remote_object_t* test_remote_objects[] = {
|
||||
REMOTE_OBJECT(master_to_slave),
|
||||
REMOTE_OBJECT(master_to_single_slave),
|
||||
REMOTE_OBJECT(slave_to_master),
|
||||
};
|
||||
|
||||
Describe(Transport);
|
||||
BeforeEach(Transport) {
|
||||
add_remote_objects(test_remote_objects, sizeof(test_remote_objects) / sizeof(remote_object_t*));
|
||||
sent_data_size = 0;
|
||||
}
|
||||
AfterEach(Transport) {}
|
||||
|
||||
Ensure(Transport, write_to_local_signals_an_event) {
|
||||
begin_write_master_to_slave();
|
||||
expect(signal_data_written);
|
||||
end_write_master_to_slave();
|
||||
begin_write_slave_to_master();
|
||||
expect(signal_data_written);
|
||||
end_write_slave_to_master();
|
||||
begin_write_master_to_single_slave(1);
|
||||
expect(signal_data_written);
|
||||
end_write_master_to_single_slave(1);
|
||||
}
|
||||
|
||||
Ensure(Transport, writes_from_master_to_all_slaves) {
|
||||
update_transport();
|
||||
test_object1_t* obj = begin_write_master_to_slave();
|
||||
obj->test = 5;
|
||||
expect(signal_data_written);
|
||||
end_write_master_to_slave();
|
||||
expect(router_send_frame,
|
||||
when(destination, is_equal_to(0xFF)));
|
||||
update_transport();
|
||||
transport_recv_frame(0, sent_data, sent_data_size);
|
||||
test_object1_t* obj2 = read_master_to_slave();
|
||||
assert_that(obj2, is_not_equal_to(NULL));
|
||||
assert_that(obj2->test, is_equal_to(5));
|
||||
}
|
||||
|
||||
Ensure(Transport, writes_from_slave_to_master) {
|
||||
update_transport();
|
||||
test_object1_t* obj = begin_write_slave_to_master();
|
||||
obj->test = 7;
|
||||
expect(signal_data_written);
|
||||
end_write_slave_to_master();
|
||||
expect(router_send_frame,
|
||||
when(destination, is_equal_to(0)));
|
||||
update_transport();
|
||||
transport_recv_frame(3, sent_data, sent_data_size);
|
||||
test_object1_t* obj2 = read_slave_to_master(2);
|
||||
assert_that(read_slave_to_master(0), is_equal_to(NULL));
|
||||
assert_that(obj2, is_not_equal_to(NULL));
|
||||
assert_that(obj2->test, is_equal_to(7));
|
||||
}
|
||||
|
||||
Ensure(Transport, writes_from_master_to_single_slave) {
|
||||
update_transport();
|
||||
test_object1_t* obj = begin_write_master_to_single_slave(3);
|
||||
obj->test = 7;
|
||||
expect(signal_data_written);
|
||||
end_write_master_to_single_slave(3);
|
||||
expect(router_send_frame,
|
||||
when(destination, is_equal_to(4)));
|
||||
update_transport();
|
||||
transport_recv_frame(0, sent_data, sent_data_size);
|
||||
test_object1_t* obj2 = read_master_to_single_slave();
|
||||
assert_that(obj2, is_not_equal_to(NULL));
|
||||
assert_that(obj2->test, is_equal_to(7));
|
||||
}
|
||||
|
||||
Ensure(Transport, ignores_object_with_invalid_id) {
|
||||
update_transport();
|
||||
test_object1_t* obj = begin_write_master_to_single_slave(3);
|
||||
obj->test = 7;
|
||||
expect(signal_data_written);
|
||||
end_write_master_to_single_slave(3);
|
||||
expect(router_send_frame,
|
||||
when(destination, is_equal_to(4)));
|
||||
update_transport();
|
||||
sent_data[sent_data_size - 1] = 44;
|
||||
transport_recv_frame(0, sent_data, sent_data_size);
|
||||
test_object1_t* obj2 = read_master_to_single_slave();
|
||||
assert_that(obj2, is_equal_to(NULL));
|
||||
}
|
||||
|
||||
Ensure(Transport, ignores_object_with_size_too_small) {
|
||||
update_transport();
|
||||
test_object1_t* obj = begin_write_master_to_slave();
|
||||
obj->test = 7;
|
||||
expect(signal_data_written);
|
||||
end_write_master_to_slave();
|
||||
expect(router_send_frame);
|
||||
update_transport();
|
||||
sent_data[sent_data_size - 2] = 0;
|
||||
transport_recv_frame(0, sent_data, sent_data_size - 1);
|
||||
test_object1_t* obj2 = read_master_to_slave();
|
||||
assert_that(obj2, is_equal_to(NULL));
|
||||
}
|
||||
|
||||
Ensure(Transport, ignores_object_with_size_too_big) {
|
||||
update_transport();
|
||||
test_object1_t* obj = begin_write_master_to_slave();
|
||||
obj->test = 7;
|
||||
expect(signal_data_written);
|
||||
end_write_master_to_slave();
|
||||
expect(router_send_frame);
|
||||
update_transport();
|
||||
sent_data[sent_data_size + 21] = 0;
|
||||
transport_recv_frame(0, sent_data, sent_data_size + 22);
|
||||
test_object1_t* obj2 = read_master_to_slave();
|
||||
assert_that(obj2, is_equal_to(NULL));
|
||||
}
|
||||
@ -0,0 +1,188 @@
|
||||
/*
|
||||
The MIT License (MIT)
|
||||
|
||||
Copyright (c) 2016 Fred Sundvik
|
||||
|
||||
Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
of this software and associated documentation files (the "Software"), to deal
|
||||
in the Software without restriction, including without limitation the rights
|
||||
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
copies of the Software, and to permit persons to whom the Software is
|
||||
furnished to do so, subject to the following conditions:
|
||||
|
||||
The above copyright notice and this permission notice shall be included in all
|
||||
copies or substantial portions of the Software.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "gtest/gtest.h"
|
||||
#include "gmock/gmock.h"
|
||||
|
||||
using testing::_;
|
||||
using testing::ElementsAreArray;
|
||||
using testing::Args;
|
||||
|
||||
extern "C" {
|
||||
#include "serial_link/protocol/transport.h"
|
||||
}
|
||||
|
||||
struct test_object1 {
|
||||
uint32_t test;
|
||||
};
|
||||
|
||||
struct test_object2 {
|
||||
uint32_t test1;
|
||||
uint32_t test2;
|
||||
};
|
||||
|
||||
MASTER_TO_ALL_SLAVES_OBJECT(master_to_slave, test_object1);
|
||||
MASTER_TO_SINGLE_SLAVE_OBJECT(master_to_single_slave, test_object1);
|
||||
SLAVE_TO_MASTER_OBJECT(slave_to_master, test_object1);
|
||||
|
||||
static remote_object_t* test_remote_objects[] = {
|
||||
REMOTE_OBJECT(master_to_slave),
|
||||
REMOTE_OBJECT(master_to_single_slave),
|
||||
REMOTE_OBJECT(slave_to_master),
|
||||
};
|
||||
|
||||
class Transport : public testing::Test {
|
||||
public:
|
||||
Transport() {
|
||||
Instance = this;
|
||||
add_remote_objects(test_remote_objects, sizeof(test_remote_objects) / sizeof(remote_object_t*));
|
||||
}
|
||||
|
||||
~Transport() {
|
||||
Instance = nullptr;
|
||||
reinitialize_serial_link_transport();
|
||||
}
|
||||
|
||||
MOCK_METHOD0(signal_data_written, void ());
|
||||
MOCK_METHOD1(router_send_frame, void (uint8_t destination));
|
||||
|
||||
void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size) {
|
||||
router_send_frame(destination);
|
||||
std::copy(data, data + size, std::back_inserter(sent_data));
|
||||
}
|
||||
|
||||
static Transport* Instance;
|
||||
|
||||
std::vector<uint8_t> sent_data;
|
||||
};
|
||||
|
||||
Transport* Transport::Instance = nullptr;
|
||||
|
||||
extern "C" {
|
||||
void signal_data_written(void) {
|
||||
Transport::Instance->signal_data_written();
|
||||
}
|
||||
|
||||
void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size) {
|
||||
Transport::Instance->router_send_frame(destination, data, size);
|
||||
}
|
||||
}
|
||||
|
||||
TEST_F(Transport, write_to_local_signals_an_event) {
|
||||
begin_write_master_to_slave();
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_master_to_slave();
|
||||
begin_write_slave_to_master();
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_slave_to_master();
|
||||
begin_write_master_to_single_slave(1);
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_master_to_single_slave(1);
|
||||
}
|
||||
|
||||
TEST_F(Transport, writes_from_master_to_all_slaves) {
|
||||
update_transport();
|
||||
test_object1* obj = begin_write_master_to_slave();
|
||||
obj->test = 5;
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_master_to_slave();
|
||||
EXPECT_CALL(*this, router_send_frame(0xFF));
|
||||
update_transport();
|
||||
transport_recv_frame(0, sent_data.data(), sent_data.size());
|
||||
test_object1* obj2 = read_master_to_slave();
|
||||
EXPECT_NE(obj2, nullptr);
|
||||
EXPECT_EQ(obj2->test, 5);
|
||||
}
|
||||
|
||||
TEST_F(Transport, writes_from_slave_to_master) {
|
||||
update_transport();
|
||||
test_object1* obj = begin_write_slave_to_master();
|
||||
obj->test = 7;
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_slave_to_master();
|
||||
EXPECT_CALL(*this, router_send_frame(0));
|
||||
update_transport();
|
||||
transport_recv_frame(3, sent_data.data(), sent_data.size());
|
||||
test_object1* obj2 = read_slave_to_master(2);
|
||||
EXPECT_EQ(read_slave_to_master(0), nullptr);
|
||||
EXPECT_NE(obj2, nullptr);
|
||||
EXPECT_EQ(obj2->test, 7);
|
||||
}
|
||||
|
||||
TEST_F(Transport, writes_from_master_to_single_slave) {
|
||||
update_transport();
|
||||
test_object1* obj = begin_write_master_to_single_slave(3);
|
||||
obj->test = 7;
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_master_to_single_slave(3);
|
||||
EXPECT_CALL(*this, router_send_frame(4));
|
||||
update_transport();
|
||||
transport_recv_frame(0, sent_data.data(), sent_data.size());
|
||||
test_object1* obj2 = read_master_to_single_slave();
|
||||
EXPECT_NE(obj2, nullptr);
|
||||
EXPECT_EQ(obj2->test, 7);
|
||||
}
|
||||
|
||||
TEST_F(Transport, ignores_object_with_invalid_id) {
|
||||
update_transport();
|
||||
test_object1* obj = begin_write_master_to_single_slave(3);
|
||||
obj->test = 7;
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_master_to_single_slave(3);
|
||||
EXPECT_CALL(*this, router_send_frame(4));
|
||||
update_transport();
|
||||
sent_data[sent_data.size() - 1] = 44;
|
||||
transport_recv_frame(0, sent_data.data(), sent_data.size());
|
||||
test_object1* obj2 = read_master_to_single_slave();
|
||||
EXPECT_EQ(obj2, nullptr);
|
||||
}
|
||||
|
||||
TEST_F(Transport, ignores_object_with_size_too_small) {
|
||||
update_transport();
|
||||
test_object1* obj = begin_write_master_to_slave();
|
||||
obj->test = 7;
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_master_to_slave();
|
||||
EXPECT_CALL(*this, router_send_frame(_));
|
||||
update_transport();
|
||||
sent_data[sent_data.size() - 2] = 0;
|
||||
transport_recv_frame(0, sent_data.data(), sent_data.size() - 1);
|
||||
test_object1* obj2 = read_master_to_slave();
|
||||
EXPECT_EQ(obj2, nullptr);
|
||||
}
|
||||
|
||||
TEST_F(Transport, ignores_object_with_size_too_big) {
|
||||
update_transport();
|
||||
test_object1* obj = begin_write_master_to_slave();
|
||||
obj->test = 7;
|
||||
EXPECT_CALL(*this, signal_data_written());
|
||||
end_write_master_to_slave();
|
||||
EXPECT_CALL(*this, router_send_frame(_));
|
||||
update_transport();
|
||||
sent_data.resize(sent_data.size() + 22);
|
||||
sent_data[sent_data.size() - 1] = 0;
|
||||
transport_recv_frame(0, sent_data.data(), sent_data.size());
|
||||
test_object1* obj2 = read_master_to_slave();
|
||||
EXPECT_EQ(obj2, nullptr);
|
||||
}
|
||||
@ -0,0 +1,67 @@
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
@ -0,0 +1,13 @@
|
||||
include $(ROOT_DIR)/quantum/serial_link/tests/testlist.mk
|
||||
|
||||
define VALIDATE_TEST_LIST
|
||||
ifneq ($1,)
|
||||
ifeq ($$(findstring -,$1),-)
|
||||
$$(error Test names can't contain '-', but '$1' does)
|
||||
else
|
||||
$$(eval $$(call VALIDATE_TEST_LIST,$$(firstword $2),$$(wordlist 2,9999,$2)))
|
||||
endif
|
||||
endif
|
||||
endef
|
||||
|
||||
$(eval $(call VALIDATE_TEST_LIST,$(firstword $(TEST_LIST)),$(wordlist 2,9999,$(TEST_LIST))))
|
||||
@ -0,0 +1,24 @@
|
||||
CC = gcc
|
||||
OBJCOPY =
|
||||
OBJDUMP =
|
||||
SIZE =
|
||||
AR =
|
||||
NM =
|
||||
HEX =
|
||||
EEP =
|
||||
BIN =
|
||||
|
||||
|
||||
COMPILEFLAGS += -funsigned-char
|
||||
COMPILEFLAGS += -funsigned-bitfields
|
||||
COMPILEFLAGS += -ffunction-sections
|
||||
COMPILEFLAGS += -fdata-sections
|
||||
COMPILEFLAGS += -fshort-enums
|
||||
|
||||
CFLAGS += $(COMPILEFLAGS)
|
||||
CFLAGS += -fno-inline-small-functions
|
||||
CFLAGS += -fno-strict-aliasing
|
||||
|
||||
CPPFLAGS += $(COMPILEFLAGS)
|
||||
CPPFLAGS += -fno-exceptions
|
||||
CPPFLAGS += -std=gnu++11
|
||||
Loading…
Reference in new issue