Minor bootloader tweaks; make some functions static where possible to reduce the compiled binary size, add additional comments to the makefiles.

Bootloaders/CDC/BootloaderCDC.c

@@ -88,7 +88,7 @@ int main(void)
 }
 
 /** Configures all hardware required for the bootloader. */
-void SetupHardware(void)
+static void SetupHardware(void)
 {
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
@@ -350,7 +350,7 @@ static void WriteNextResponseByte(const uint8_t Response)
 /** Task to read in AVR910 commands from the CDC data OUT endpoint, process them, perform the required actions
  *  and send the appropriate response back to the host.
  */
-void CDC_Task(void)
+static void CDC_Task(void)
 {
 	/* Select the OUT endpoint */
 	Endpoint_SelectEndpoint(CDC_RX_EPNUM);

Bootloaders/CDC/BootloaderCDC.h

@@ -72,8 +72,8 @@
 		typedef void (*AppPtr_t)(void) ATTR_NO_RETURN;
 
 	/* Function Prototypes: */
-		void CDC_Task(void);
+		static void CDC_Task(void);
-		void SetupHardware(void);
+		static void SetupHardware(void);
 
 		void EVENT_USB_Device_ConfigurationChanged(void);
 

Bootloaders/CDC/makefile

@@ -96,6 +96,11 @@ F_USB = $(F_CPU)
 # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
 FLASH_SIZE_KB        = 128
 BOOT_SECTION_SIZE_KB = 4
+
+
+# Formulas used to calculate the starting address of the Bootloader section, and the User Application
+# API jump table (for more information on the latter, see the bootloader documentation). These formulas
+# should not need to be altered - modify the FLASH_SIZE_KB and BOOT_SECTION_KB values above instead.
 BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
 BOOT_API_TABLESTART  = 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - 32)" | bc)
 

Bootloaders/DFU/BootloaderDFU.c

@@ -137,7 +137,7 @@ int main(void)
 }
 
 /** Configures all hardware required for the bootloader. */
-void SetupHardware(void)
+static void SetupHardware(void)
 {
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
@@ -160,7 +160,7 @@ void SetupHardware(void)
 }
 
 /** Resets all configured hardware required for the bootloader back to their original states. */
-void ResetHardware(void)
+static void ResetHardware(void)
 {
 	/* Shut down the USB subsystem */
 	USB_Disable();

Bootloaders/DFU/BootloaderDFU.h

@@ -192,8 +192,8 @@
 		};
 
 	/* Function Prototypes: */
-		void SetupHardware(void);
+		static void SetupHardware(void);
-		void ResetHardware(void);
+		static void ResetHardware(void);
 
 		void EVENT_USB_Device_ControlRequest(void);
 

Bootloaders/DFU/makefile

@@ -96,6 +96,11 @@ F_USB = $(F_CPU)
 # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
 FLASH_SIZE_KB        = 128
 BOOT_SECTION_SIZE_KB = 4
+
+
+# Formulas used to calculate the starting address of the Bootloader section, and the User Application
+# API jump table (for more information on the latter, see the bootloader documentation). These formulas
+# should not need to be altered - modify the FLASH_SIZE_KB and BOOT_SECTION_KB values above instead.
 BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
 BOOT_API_TABLESTART  = 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - 32)" | bc)
 

Bootloaders/HID/BootloaderHID.c

@@ -65,7 +65,7 @@ int main(void)
 }
 
 /** Configures all hardware required for the bootloader. */
-void SetupHardware(void)
+static void SetupHardware(void)
 {
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);

Bootloaders/HID/BootloaderHID.h

@@ -53,7 +53,7 @@
 		#define COMMAND_STARTAPPLICATION   0xFFFF
 
 	/* Function Prototypes: */
-		void SetupHardware(void);
+		static void SetupHardware(void);
 
 		void EVENT_USB_Device_ConfigurationChanged(void);
 		void EVENT_USB_Device_UnhandledControlRequest(void);

Bootloaders/HID/makefile

@@ -96,6 +96,10 @@ F_USB = $(F_CPU)
 # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
 FLASH_SIZE_KB        = 128
 BOOT_SECTION_SIZE_KB = 4
+
+
+# Formulas used to calculate the starting address of the Bootloader section. These formulas
+# should not need to be altered - modify the FLASH_SIZE_KB and BOOT_SECTION_KB values above instead.
 BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)