Seperate out XMEGA and TINY NVM routines into seperate files.

pull/1469/head
Dean Camera 15 years ago
parent cda88cf97c
commit be71f934a4

File diff suppressed because one or more lines are too long

@ -160,28 +160,28 @@ static void PDIProtocol_Erase(void)
Endpoint_ClearOUT(); Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t EraseCommand = NVM_CMD_NOOP; uint8_t EraseCommand = XMEGA_NVM_CMD_NOOP;
/* Determine which NVM command to send to the device depending on the memory to erase */ /* Determine which NVM command to send to the device depending on the memory to erase */
if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP) if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)
EraseCommand = NVM_CMD_CHIPERASE; EraseCommand = XMEGA_NVM_CMD_CHIPERASE;
else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP)
EraseCommand = NVM_CMD_ERASEAPPSEC; EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC;
else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_BOOT) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_BOOT)
EraseCommand = NVM_CMD_ERASEBOOTSEC; EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC;
else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_EEPROM) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_EEPROM)
EraseCommand = NVM_CMD_ERASEEEPROM; EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM;
else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP_PAGE) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP_PAGE)
EraseCommand = NVM_CMD_ERASEAPPSECPAGE; EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE;
else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_BOOT_PAGE) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_BOOT_PAGE)
EraseCommand = NVM_CMD_ERASEBOOTSECPAGE; EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE;
else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_EEPROM_PAGE) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_EEPROM_PAGE)
EraseCommand = NVM_CMD_ERASEEEPROMPAGE; EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE;
else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_USERSIG) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_USERSIG)
EraseCommand = NVM_CMD_ERASEUSERSIG; EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG;
/* Erase the target memory, indicate timeout if ocurred */ /* Erase the target memory, indicate timeout if ocurred */
if (!(NVMTarget_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
ReturnStatus = XPRG_ERR_TIMEOUT; ReturnStatus = XPRG_ERR_TIMEOUT;
Endpoint_Write_Byte(CMD_XPROG); Endpoint_Write_Byte(CMD_XPROG);
@ -214,47 +214,47 @@ static void PDIProtocol_WriteMemory(void)
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
/* Assume FLASH page programming by default, as it is the common case */ /* Assume FLASH page programming by default, as it is the common case */
uint8_t WriteCommand = NVM_CMD_WRITEFLASHPAGE; uint8_t WriteCommand = XMEGA_NVM_CMD_WRITEFLASHPAGE;
uint8_t WriteBuffCommand = NVM_CMD_LOADFLASHPAGEBUFF; uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
uint8_t EraseBuffCommand = NVM_CMD_ERASEFLASHPAGEBUFF; uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
bool PagedMemory = true; bool PagedMemory = true;
if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL) if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL)
{ {
WriteCommand = NVM_CMD_WRITEAPPSECPAGE; WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
} }
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_BOOT) else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_BOOT)
{ {
WriteCommand = NVM_CMD_WRITEBOOTSECPAGE; WriteCommand = XMEGA_NVM_CMD_WRITEBOOTSECPAGE;
} }
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_EEPROM) else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_EEPROM)
{ {
WriteCommand = NVM_CMD_WRITEEEPROMPAGE; WriteCommand = XMEGA_NVM_CMD_WRITEEEPROMPAGE;
WriteBuffCommand = NVM_CMD_LOADEEPROMPAGEBUFF; WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;
EraseBuffCommand = NVM_CMD_ERASEEEPROMPAGEBUFF; EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
} }
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_USERSIG) else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_USERSIG)
{ {
/* User signature is paged, but needs us to manually indicate the mode bits since the host doesn't set them */ /* User signature is paged, but needs us to manually indicate the mode bits since the host doesn't set them */
WriteMemory_XPROG_Params.PageMode = (XPRG_PAGEMODE_ERASE | XPRG_PAGEMODE_WRITE); WriteMemory_XPROG_Params.PageMode = (XPRG_PAGEMODE_ERASE | XPRG_PAGEMODE_WRITE);
WriteCommand = NVM_CMD_WRITEUSERSIG; WriteCommand = XMEGA_NVM_CMD_WRITEUSERSIG;
} }
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_FUSE) else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_FUSE)
{ {
WriteCommand = NVM_CMD_WRITEFUSE; WriteCommand = XMEGA_NVM_CMD_WRITEFUSE;
PagedMemory = false; PagedMemory = false;
} }
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_LOCKBITS) else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_LOCKBITS)
{ {
WriteCommand = NVM_CMD_WRITELOCK; WriteCommand = XMEGA_NVM_CMD_WRITELOCK;
PagedMemory = false; PagedMemory = false;
} }
/* Send the appropriate memory write commands to the device, indicate timeout if occurred */ /* Send the appropriate memory write commands to the device, indicate timeout if occurred */
if ((PagedMemory && !NVMTarget_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand, if ((PagedMemory && !XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length)) || WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length)) ||
(!PagedMemory && !NVMTarget_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address, (!PagedMemory && !XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
WriteMemory_XPROG_Params.ProgData))) WriteMemory_XPROG_Params.ProgData)))
{ {
ReturnStatus = XPRG_ERR_TIMEOUT; ReturnStatus = XPRG_ERR_TIMEOUT;
@ -290,7 +290,7 @@ static void PDIProtocol_ReadMemory(void)
uint8_t ReadBuffer[256]; uint8_t ReadBuffer[256];
/* Read the target's memory, indicate timeout if occurred */ /* Read the target's memory, indicate timeout if occurred */
if (!(NVMTarget_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length))) if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
ReturnStatus = XPRG_ERR_TIMEOUT; ReturnStatus = XPRG_ERR_TIMEOUT;
Endpoint_Write_Byte(CMD_XPROG); Endpoint_Write_Byte(CMD_XPROG);
@ -319,19 +319,19 @@ static void PDIProtocol_ReadCRC(void)
Endpoint_ClearOUT(); Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t CRCCommand = NVM_CMD_NOOP; uint8_t CRCCommand = XMEGA_NVM_CMD_NOOP;
uint32_t MemoryCRC; uint32_t MemoryCRC;
/* Determine which NVM command to send to the device depending on the memory to CRC */ /* Determine which NVM command to send to the device depending on the memory to CRC */
if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_APP) if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_APP)
CRCCommand = NVM_CMD_APPCRC; CRCCommand = XMEGA_NVM_CMD_APPCRC;
else if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_BOOT) else if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_BOOT)
CRCCommand = NVM_CMD_BOOTCRC; CRCCommand = XMEGA_NVM_CMD_BOOTCRC;
else else
CRCCommand = NVM_CMD_FLASHCRC; CRCCommand = XMEGA_NVM_CMD_FLASHCRC;
/* Perform and retrieve the memory CRC, indicate timeout if occurred */ /* Perform and retrieve the memory CRC, indicate timeout if occurred */
if (!(NVMTarget_GetMemoryCRC(CRCCommand, &MemoryCRC))) if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
ReturnStatus = XPRG_ERR_TIMEOUT; ReturnStatus = XPRG_ERR_TIMEOUT;
Endpoint_Write_Byte(CMD_XPROG); Endpoint_Write_Byte(CMD_XPROG);

@ -0,0 +1,144 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Target-related functions for the TINY target's NVM module.
*/
#define INCLUDE_FROM_TINYNVM_C
#include "TINYNVM.h"
#if defined(ENABLE_TPI_PROTOCOL) || defined(__DOXYGEN__)
/** Sends the given NVM register address to the target.
*
* \param[in] Register NVM register whose absolute address is to be sent
*/
void TINYNVM_SendNVMRegAddress(const uint8_t Register)
{
// TODO
}
/** Sends the given 32-bit absolute address to the target.
*
* \param[in] AbsoluteAddress Absolute address to send to the target
*/
void TINYNVM_SendAddress(const uint32_t AbsoluteAddress)
{
// TODO
}
/** Waits while the target's NVM controller is busy performing an operation, exiting if the
* timeout period expires.
*
* \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
*/
bool TINYNVM_WaitWhileNVMControllerBusy(void)
{
// TODO
return false;
}
/** Retrieves the CRC value of the given memory space.
*
* \param[in] CRCCommand NVM CRC command to issue to the target
* \param[out] CRCDest CRC Destination when read from the target
*
* \return Boolean true if the command sequence complete successfully
*/
bool TINYNVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
{
// TODO
return true;
}
/** Reads memory from the target's memory spaces.
*
* \param[in] ReadAddress Start address to read from within the target's address space
* \param[out] ReadBuffer Buffer to store read data into
* \param[in] ReadSize Number of bytes to read
*
* \return Boolean true if the command sequence complete successfully
*/
bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)
{
// TODO
return true;
}
/** Writes byte addressed memory to the target's memory spaces.
*
* \param[in] WriteCommand Command to send to the device to write each memory byte
* \param[in] WriteAddress Start address to write to within the target's address space
* \param[in] WriteBuffer Buffer to source data from
*
* \return Boolean true if the command sequence complete successfully
*/
bool TINYNVM_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)
{
// TODO
return true;
}
/** Writes page addressed memory to the target's memory spaces.
*
* \param[in] WriteBuffCommand Command to send to the device to write a byte to the memory page buffer
* \param[in] EraseBuffCommand Command to send to the device to erase the memory page buffer
* \param[in] WritePageCommand Command to send to the device to write the page buffer to the destination memory
* \param[in] PageMode Bitfield indicating what operations need to be executed on the specified page
* \param[in] WriteAddress Start address to write the page data to within the target's address space
* \param[in] WriteBuffer Buffer to source data from
* \param[in] WriteSize Number of bytes to write
*
* \return Boolean true if the command sequence complete successfully
*/
bool TINYNVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t EraseBuffCommand,
const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,
const uint8_t* WriteBuffer, const uint16_t WriteSize)
{
// TODO
return true;
}
/** Erases a specific memory space of the target.
*
* \param[in] EraseCommand NVM erase command to send to the device
* \param[in] Address Address inside the memory space to erase
*
* \return Boolean true if the command sequence complete successfully
*/
bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
{
// TODO
return true;
}
#endif

@ -0,0 +1,73 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for TINYNVM.c.
*/
#ifndef _TINY_NVM_
#define _TINY_NVM_
/* Includes: */
#include <avr/io.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include <LUFA/Common/Common.h>
#include "TPITarget.h"
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#undef ENABLE_TPI_PROTOCOL
#if !defined(ENABLE_PDI_PROTOCOL)
#define ENABLE_PDI_PROTOCOL
#endif
#endif
/* Defines: */
#define TINY_NVM_BUSY_TIMEOUT_MS 200
/* Function Prototypes: */
void TINYNVM_SendNVMRegAddress(const uint8_t Register);
void TINYNVM_SendAddress(const uint32_t AbsoluteAddress);
bool TINYNVM_WaitWhileNVMControllerBusy(void);
bool TINYNVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest);
bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize);
bool TINYNVM_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer);
bool TINYNVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t EraseBuffCommand,
const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,
const uint8_t* WriteBuffer, const uint16_t WriteSize);
bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address);
#endif

@ -30,11 +30,11 @@
/** \file /** \file
* *
* Target-related functions for the target's NVM module. * Target-related functions for the XMEGA target's NVM module.
*/ */
#define INCLUDE_FROM_NVMTARGET_C #define INCLUDE_FROM_XMEGA_NVM_C
#include "NVMTarget.h" #include "XMEGANVM.h"
#if defined(ENABLE_PDI_PROTOCOL) || defined(__DOXYGEN__) #if defined(ENABLE_PDI_PROTOCOL) || defined(__DOXYGEN__)
@ -42,20 +42,20 @@
* *
* \param[in] Register NVM register whose absolute address is to be sent * \param[in] Register NVM register whose absolute address is to be sent
*/ */
void NVMTarget_SendNVMRegAddress(const uint8_t Register) void XMEGANVM_SendNVMRegAddress(const uint8_t Register)
{ {
/* Determine the absolute register address from the NVM base memory address and the NVM register address */ /* Determine the absolute register address from the NVM base memory address and the NVM register address */
uint32_t Address = XPROG_Param_NVMBase | Register; uint32_t Address = XPROG_Param_NVMBase | Register;
/* Send the calculated 32-bit address to the target, LSB first */ /* Send the calculated 32-bit address to the target, LSB first */
NVMTarget_SendAddress(Address); XMEGANVM_SendAddress(Address);
} }
/** Sends the given 32-bit absolute address to the target. /** Sends the given 32-bit absolute address to the target.
* *
* \param[in] AbsoluteAddress Absolute address to send to the target * \param[in] AbsoluteAddress Absolute address to send to the target
*/ */
void NVMTarget_SendAddress(const uint32_t AbsoluteAddress) void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress)
{ {
/* Send the given 32-bit address to the target, LSB first */ /* Send the given 32-bit address to the target, LSB first */
PDITarget_SendByte(AbsoluteAddress & 0xFF); PDITarget_SendByte(AbsoluteAddress & 0xFF);
@ -69,19 +69,19 @@ void NVMTarget_SendAddress(const uint32_t AbsoluteAddress)
* *
* \return Boolean true if the NVM controller became ready within the timeout period, false otherwise * \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
*/ */
bool NVMTarget_WaitWhileNVMControllerBusy(void) bool XMEGANVM_WaitWhileNVMControllerBusy(void)
{ {
TCNT0 = 0; TCNT0 = 0;
TIFR0 = (1 << OCF1A); TIFR0 = (1 << OCF1A);
uint8_t TimeoutMS = PDI_NVM_TIMEOUT_MS; uint8_t TimeoutMS = XMEGA_NVM_BUSY_TIMEOUT_MS;
/* Poll the NVM STATUS register while the NVM controller is busy */ /* Poll the NVM STATUS register while the NVM controller is busy */
while (TimeoutMS) while (TimeoutMS)
{ {
/* Send a LDS command to read the NVM STATUS register to check the BUSY flag */ /* Send a LDS command to read the NVM STATUS register to check the BUSY flag */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_STATUS); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS);
/* Check to see if the BUSY flag is still set */ /* Check to see if the BUSY flag is still set */
if (!(PDITarget_ReceiveByte() & (1 << 7))) if (!(PDITarget_ReceiveByte() & (1 << 7)))
@ -104,20 +104,20 @@ bool NVMTarget_WaitWhileNVMControllerBusy(void)
* *
* \return Boolean true if the command sequence complete successfully * \return Boolean true if the command sequence complete successfully
*/ */
bool NVMTarget_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest) bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
{ {
/* Wait until the NVM controller is no longer busy */ /* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy())) if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false; return false;
/* Set the NVM command to the correct CRC read command */ /* Set the NVM command to the correct CRC read command */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
PDITarget_SendByte(CRCCommand); PDITarget_SendByte(CRCCommand);
/* Set CMDEX bit in NVM CTRLA register to start the CRC generation */ /* Set CMDEX bit in NVM CTRLA register to start the CRC generation */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CTRLA); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
PDITarget_SendByte(1 << 0); PDITarget_SendByte(1 << 0);
/* Wait until the NVM bus is ready again */ /* Wait until the NVM bus is ready again */
@ -125,24 +125,24 @@ bool NVMTarget_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
return false; return false;
/* Wait until the NVM controller is no longer busy */ /* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy())) if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false; return false;
*CRCDest = 0; *CRCDest = 0;
/* Read the first generated CRC byte value */ /* Read the first generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT0); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0);
*CRCDest = PDITarget_ReceiveByte(); *CRCDest = PDITarget_ReceiveByte();
/* Read the second generated CRC byte value */ /* Read the second generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT1); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT1);
*CRCDest |= ((uint16_t)PDITarget_ReceiveByte() << 8); *CRCDest |= ((uint16_t)PDITarget_ReceiveByte() << 8);
/* Read the third generated CRC byte value */ /* Read the third generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT2); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT2);
*CRCDest |= ((uint32_t)PDITarget_ReceiveByte() << 16); *CRCDest |= ((uint32_t)PDITarget_ReceiveByte() << 16);
return true; return true;
@ -156,20 +156,20 @@ bool NVMTarget_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
* *
* \return Boolean true if the command sequence complete successfully * \return Boolean true if the command sequence complete successfully
*/ */
bool NVMTarget_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize) bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)
{ {
/* Wait until the NVM controller is no longer busy */ /* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy())) if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false; return false;
/* Send the READNVM command to the NVM controller for reading of an arbitrary location */ /* Send the READNVM command to the NVM controller for reading of an arbitrary location */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
PDITarget_SendByte(NVM_CMD_READNVM); PDITarget_SendByte(XMEGA_NVM_CMD_READNVM);
/* Load the PDI pointer register with the start address we want to read from */ /* Load the PDI pointer register with the start address we want to read from */
PDITarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES); PDITarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
NVMTarget_SendAddress(ReadAddress); XMEGANVM_SendAddress(ReadAddress);
/* Send the REPEAT command with the specified number of bytes to read */ /* Send the REPEAT command with the specified number of bytes to read */
PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE); PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
@ -191,20 +191,20 @@ bool NVMTarget_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const
* *
* \return Boolean true if the command sequence complete successfully * \return Boolean true if the command sequence complete successfully
*/ */
bool NVMTarget_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer) bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)
{ {
/* Wait until the NVM controller is no longer busy */ /* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy())) if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false; return false;
/* Send the memory write command to the target */ /* Send the memory write command to the target */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
PDITarget_SendByte(WriteCommand); PDITarget_SendByte(WriteCommand);
/* Send new memory byte to the memory to the target */ /* Send new memory byte to the memory to the target */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendAddress(WriteAddress); XMEGANVM_SendAddress(WriteAddress);
PDITarget_SendByte(*(WriteBuffer++)); PDITarget_SendByte(*(WriteBuffer++));
return true; return true;
@ -222,41 +222,41 @@ bool NVMTarget_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteA
* *
* \return Boolean true if the command sequence complete successfully * \return Boolean true if the command sequence complete successfully
*/ */
bool NVMTarget_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t EraseBuffCommand, bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t EraseBuffCommand,
const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress, const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,
const uint8_t* WriteBuffer, const uint16_t WriteSize) const uint8_t* WriteBuffer, const uint16_t WriteSize)
{ {
if (PageMode & XPRG_PAGEMODE_ERASE) if (PageMode & XPRG_PAGEMODE_ERASE)
{ {
/* Wait until the NVM controller is no longer busy */ /* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy())) if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false; return false;
/* Send the memory buffer erase command to the target */ /* Send the memory buffer erase command to the target */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
PDITarget_SendByte(EraseBuffCommand); PDITarget_SendByte(EraseBuffCommand);
/* Set CMDEX bit in NVM CTRLA register to start the buffer erase */ /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CTRLA); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
PDITarget_SendByte(1 << 0); PDITarget_SendByte(1 << 0);
} }
if (WriteSize) if (WriteSize)
{ {
/* Wait until the NVM controller is no longer busy */ /* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy())) if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false; return false;
/* Send the memory buffer write command to the target */ /* Send the memory buffer write command to the target */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
PDITarget_SendByte(WriteBuffCommand); PDITarget_SendByte(WriteBuffCommand);
/* Load the PDI pointer register with the start address we want to write to */ /* Load the PDI pointer register with the start address we want to write to */
PDITarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES); PDITarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
NVMTarget_SendAddress(WriteAddress); XMEGANVM_SendAddress(WriteAddress);
/* Send the REPEAT command with the specified number of bytes to write */ /* Send the REPEAT command with the specified number of bytes to write */
PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE); PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
@ -271,17 +271,17 @@ bool NVMTarget_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t Era
if (PageMode & XPRG_PAGEMODE_WRITE) if (PageMode & XPRG_PAGEMODE_WRITE)
{ {
/* Wait until the NVM controller is no longer busy */ /* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy())) if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false; return false;
/* Send the memory write command to the target */ /* Send the memory write command to the target */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
PDITarget_SendByte(WritePageCommand); PDITarget_SendByte(WritePageCommand);
/* Send the address of the first page location to write the memory page */ /* Send the address of the first page location to write the memory page */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendAddress(WriteAddress); XMEGANVM_SendAddress(WriteAddress);
PDITarget_SendByte(0x00); PDITarget_SendByte(0x00);
} }
@ -295,30 +295,30 @@ bool NVMTarget_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t Era
* *
* \return Boolean true if the command sequence complete successfully * \return Boolean true if the command sequence complete successfully
*/ */
bool NVMTarget_EraseMemory(const uint8_t EraseCommand, const uint32_t Address) bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
{ {
/* Wait until the NVM controller is no longer busy */ /* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy())) if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
return false; return false;
/* Send the memory erase command to the target */ /* Send the memory erase command to the target */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
PDITarget_SendByte(EraseCommand); PDITarget_SendByte(EraseCommand);
/* Chip erase is handled separately, since it's procedure is different to other erase types */ /* Chip erase is handled separately, since it's procedure is different to other erase types */
if (EraseCommand == NVM_CMD_CHIPERASE) if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE)
{ {
/* Set CMDEX bit in NVM CTRLA register to start the chip erase */ /* Set CMDEX bit in NVM CTRLA register to start the chip erase */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CTRLA); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
PDITarget_SendByte(1 << 0); PDITarget_SendByte(1 << 0);
} }
else else
{ {
/* Other erase modes just need us to address a byte within the target memory space */ /* Other erase modes just need us to address a byte within the target memory space */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2)); PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendAddress(Address); XMEGANVM_SendAddress(Address);
PDITarget_SendByte(0x00); PDITarget_SendByte(0x00);
} }

@ -30,11 +30,11 @@
/** \file /** \file
* *
* Header file for NVMTarget.c. * Header file for XMEGANVM.c.
*/ */
#ifndef _NVM_TARGET_ #ifndef _XMEGA_NVM__
#define _NVM_TARGET_ #define _XMEGA_NVM_
/* Includes: */ /* Includes: */
#include <avr/io.h> #include <avr/io.h>
@ -57,65 +57,65 @@
#endif #endif
/* Defines: */ /* Defines: */
#define NVM_BUSY_TIMEOUT_MS 200 #define XMEGA_NVM_BUSY_TIMEOUT_MS 200
#define NVM_REG_ADDR0 0x00 #define XMEGA_NVM_REG_ADDR0 0x00
#define NVM_REG_ADDR1 0x01 #define XMEGA_NVM_REG_ADDR1 0x01
#define NVM_REG_ADDR2 0x02 #define XMEGA_NVM_REG_ADDR2 0x02
#define NVM_REG_DAT0 0x04 #define XMEGA_NVM_REG_DAT0 0x04
#define NVM_REG_DAT1 0x05 #define XMEGA_NVM_REG_DAT1 0x05
#define NVM_REG_DAT2 0x06 #define XMEGA_NVM_REG_DAT2 0x06
#define NVM_REG_CMD 0x0A #define XMEGA_NVM_REG_CMD 0x0A
#define NVM_REG_CTRLA 0x0B #define XMEGA_NVM_REG_CTRLA 0x0B
#define NVM_REG_CTRLB 0x0C #define XMEGA_NVM_REG_CTRLB 0x0C
#define NVM_REG_INTCTRL 0x0D #define XMEGA_NVM_REG_INTCTRL 0x0D
#define NVM_REG_STATUS 0x0F #define XMEGA_NVM_REG_STATUS 0x0F
#define NVM_REG_LOCKBITS 0x10 #define XMEGA_NVM_REG_LOCKBITS 0x10
#define NVM_CMD_NOOP 0x00 #define XMEGA_NVM_CMD_NOOP 0x00
#define NVM_CMD_CHIPERASE 0x40 #define XMEGA_NVM_CMD_CHIPERASE 0x40
#define NVM_CMD_READNVM 0x43 #define XMEGA_NVM_CMD_READNVM 0x43
#define NVM_CMD_LOADFLASHPAGEBUFF 0x23 #define XMEGA_NVM_CMD_LOADFLASHPAGEBUFF 0x23
#define NVM_CMD_ERASEFLASHPAGEBUFF 0x26 #define XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF 0x26
#define NVM_CMD_ERASEFLASHPAGE 0x2B #define XMEGA_NVM_CMD_ERASEFLASHPAGE 0x2B
#define NVM_CMD_WRITEFLASHPAGE 0x2E #define XMEGA_NVM_CMD_WRITEFLASHPAGE 0x2E
#define NVM_CMD_ERASEWRITEFLASH 0x2F #define XMEGA_NVM_CMD_ERASEWRITEFLASH 0x2F
#define NVM_CMD_FLASHCRC 0x78 #define XMEGA_NVM_CMD_FLASHCRC 0x78
#define NVM_CMD_ERASEAPPSEC 0x20 #define XMEGA_NVM_CMD_ERASEAPPSEC 0x20
#define NVM_CMD_ERASEAPPSECPAGE 0x22 #define XMEGA_NVM_CMD_ERASEAPPSECPAGE 0x22
#define NVM_CMD_WRITEAPPSECPAGE 0x24 #define XMEGA_NVM_CMD_WRITEAPPSECPAGE 0x24
#define NVM_CMD_ERASEWRITEAPPSECPAGE 0x25 #define XMEGA_NVM_CMD_ERASEWRITEAPPSECPAGE 0x25
#define NVM_CMD_APPCRC 0x38 #define XMEGA_NVM_CMD_APPCRC 0x38
#define NVM_CMD_ERASEBOOTSEC 0x68 #define XMEGA_NVM_CMD_ERASEBOOTSEC 0x68
#define NVM_CMD_ERASEBOOTSECPAGE 0x2A #define XMEGA_NVM_CMD_ERASEBOOTSECPAGE 0x2A
#define NVM_CMD_WRITEBOOTSECPAGE 0x2C #define XMEGA_NVM_CMD_WRITEBOOTSECPAGE 0x2C
#define NVM_CMD_ERASEWRITEBOOTSECPAGE 0x2D #define XMEGA_NVM_CMD_ERASEWRITEBOOTSECPAGE 0x2D
#define NVM_CMD_BOOTCRC 0x39 #define XMEGA_NVM_CMD_BOOTCRC 0x39
#define NVM_CMD_READUSERSIG 0x03 #define XMEGA_NVM_CMD_READUSERSIG 0x03
#define NVM_CMD_ERASEUSERSIG 0x18 #define XMEGA_NVM_CMD_ERASEUSERSIG 0x18
#define NVM_CMD_WRITEUSERSIG 0x1A #define XMEGA_NVM_CMD_WRITEUSERSIG 0x1A
#define NVM_CMD_READCALIBRATION 0x02 #define XMEGA_NVM_CMD_READCALIBRATION 0x02
#define NVM_CMD_READFUSE 0x07 #define XMEGA_NVM_CMD_READFUSE 0x07
#define NVM_CMD_WRITEFUSE 0x4C #define XMEGA_NVM_CMD_WRITEFUSE 0x4C
#define NVM_CMD_WRITELOCK 0x08 #define XMEGA_NVM_CMD_WRITELOCK 0x08
#define NVM_CMD_LOADEEPROMPAGEBUFF 0x33 #define XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF 0x33
#define NVM_CMD_ERASEEEPROMPAGEBUFF 0x36 #define XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF 0x36
#define NVM_CMD_ERASEEEPROM 0x30 #define XMEGA_NVM_CMD_ERASEEEPROM 0x30
#define NVM_CMD_ERASEEEPROMPAGE 0x32 #define XMEGA_NVM_CMD_ERASEEEPROMPAGE 0x32
#define NVM_CMD_WRITEEEPROMPAGE 0x34 #define XMEGA_NVM_CMD_WRITEEEPROMPAGE 0x34
#define NVM_CMD_ERASEWRITEEEPROMPAGE 0x35 #define XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE 0x35
#define NVM_CMD_READEEPROM 0x06 #define XMEGA_NVM_CMD_READEEPROM 0x06
/* Function Prototypes: */ /* Function Prototypes: */
void NVMTarget_SendNVMRegAddress(const uint8_t Register); void XMEGANVM_SendNVMRegAddress(const uint8_t Register);
void NVMTarget_SendAddress(const uint32_t AbsoluteAddress); void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress);
bool NVMTarget_WaitWhileNVMControllerBusy(void); bool XMEGANVM_WaitWhileNVMControllerBusy(void);
bool NVMTarget_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest); bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest);
bool NVMTarget_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize); bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize);
bool NVMTarget_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer); bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer);
bool NVMTarget_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t EraseBuffCommand, bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t EraseBuffCommand,
const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress, const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,
const uint8_t* WriteBuffer, const uint16_t WriteSize); const uint8_t* WriteBuffer, const uint16_t WriteSize);
bool NVMTarget_EraseMemory(const uint8_t EraseCommand, const uint32_t Address); bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address);
#endif #endif

@ -135,6 +135,7 @@ SRC = $(TARGET).c \
Lib/PDITarget.c \ Lib/PDITarget.c \
Lib/XMEGANVM.c \ Lib/XMEGANVM.c \
Lib/TPITarget.c \ Lib/TPITarget.c \
Lib/TINYNVM.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \

Loading…
Cancel
Save