Added stdio.h stream examples for the virtual CDC UART in the CDC host demos.

Removed accidental reference to the incomplete MIDI class bootloader in the Bootloader folder makefile.

Bootloaders/makefile

@@ -26,5 +26,4 @@ all:
 %:
 	make -C 'DFU/' $@
 	make -C 'CDC/' $@
-	make -C 'MIDI/' $@
 	make -C 'TeensyHID/' $@

Demos/Host/ClassDriver/CDCHost/CDCHost.c

@@ -50,6 +50,27 @@ USB_ClassInfo_CDC_Host_t VirtualSerial_CDC_Interface =
 			},
 	};
 
+#if 0
+/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in
+ *       <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).
+ */
+
+static int CDC_putchar(char c, FILE *stream)
+{
+	CDC_Host_SendByte(&VirtualSerial_CDC_Interface, c);
+	return 0;
+}
+
+static int CDC_getchar(FILE *stream)
+{
+	if (!(CDC_Host_BytesReceived(&VirtualSerial_CDC_Interface)))
+	  return -1;
+
+	return CDC_Host_ReceiveByte(&VirtualSerial_CDC_Interface);
+}
+
+static FILE USBSerial = FDEV_SETUP_STREAM(CDC_putchar, CDC_getchar, _FDEV_SETUP_RW);
+#endif
 	
 /** Main program entry point. This routine configures the hardware required by the application, then
  *  enters a loop to run the application tasks in sequence.

Demos/Host/LowLevel/CDCHost/CDCHost.c

@@ -36,6 +36,52 @@
  
 #include "CDCHost.h"
 
+#if 0
+/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in
+ *       <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).
+ */
+	
+static int CDC_putchar(char c, FILE *stream)
+{	  
+	Pipe_SelectPipe(CDC_DATAPIPE_OUT);
+	
+	if (Pipe_WaitUntilReady())
+	  return -1;
+
+	Pipe_Write_Byte(c);
+	Pipe_ClearIN();
+	
+	return 0;
+}
+
+static int CDC_getchar(FILE *stream)
+{
+	int c;
+
+	Pipe_SelectPipe(CDC_DATAPIPE_IN);
+	
+	for (;;)
+	{
+		if (Pipe_WaitUntilReady())
+		  return -1;
+	
+		if (!(Pipe_BytesInPipe()))
+		{
+			Pipe_ClearOUT();
+		}
+		else
+		{
+			c = Pipe_Read_Byte();
+			break;
+		}
+	}
+	
+	return c;
+}
+
+static FILE USBSerial = FDEV_SETUP_STREAM(CDC_putchar, CDC_getchar, _FDEV_SETUP_RW);
+#endif
+
 /** Main program entry point. This routine configures the hardware required by the application, then
  *  enters a loop to run the application tasks in sequence.
  */

LUFA/ManPages/ChangeLog.txt

@@ -13,6 +13,7 @@
   *  - Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when
   *    Report protocol is not needed
   *  - Added new MIDI LowLevel and ClassDriver Host demo, add new MIDI Host Class driver
+  *  - Added stdio.h stream examples for the virtual CDC UART in the CDC host demos
   *
   *  <b>Changed:</b>
   *  - Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library

LUFA/ManPages/FutureChanges.txt

@@ -22,7 +22,7 @@
   *  - Master LUFA include file rather than per-module includes
   *  - Change makefiles to allow for absolute LUFA location to be used
   *  - Abstract out the physical media from the Mass Storage device demos
-  *  - Add MIDI Host Class driver
+  *  - Add RNDIS Host Class driver
   *  - Make new demos
   *      -# Multiple-report HID device
   *      -# Mouse/CDC Dual Class Device