Add the Tomato keyboard

keyboards/tomato/config.h

@@ -0,0 +1,51 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    40 Percent Club
+#define PRODUCT         Tomato
+#define DESCRIPTION     A 30 key ortholinear keyboard with RGB backlighting
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 6
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/* eliminate lag on space cadet mods */
+#define PERMISSIVE_HOLD
+
+/* setup lighting */
+#define RGB_DI_PIN B5
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 30
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif

keyboards/tomato/keymaps/default/keymap.c

@@ -0,0 +1,158 @@
+#include "tomato.h"
+
+#define SPC_F1 LT(1,KC_SPC)
+#define BS_F2 LT(2,KC_BSPC)
+#define C_F3 LT(3,KC_C)
+#define V_F4 LT(4,KC_V)
+#define B_F5 LT(5,KC_B)
+#define Z_CTL MT(MOD_LCTL, KC_Z)
+#define X_ALT MT(MOD_LALT, KC_X)
+#define N_ALT MT(MOD_RALT, KC_N)
+#define M_CTL MT(MOD_RCTL, KC_M)
+#define ENT_SFT MT(MOD_RSFT, KC_ENT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Level 0: Default Layer
+   * ,-------------------------------------------------------------------------------.
+   * |   Q   |   W   |   E   |   R   |   T   |   Y   |   U   |   I   |   O   |   P   |
+   * |-------------------------------------------------------------------------------|
+   * |   A   |   S   |   D   |   F   |   G   |   H   |   J   |   K   |   L   |  ESC  |
+   * |-------------------------------------------------------------------------------|
+   * |   Z   |   X   |   C   |   V   |  BSPC |  SPC  |   B   |   N   |   M   |  ENT  |
+   * '-------------------------------------------------------------------------------'
+   */
+  KEYMAP
+    ( KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P
+    , KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_ESC
+    , Z_CTL,  X_ALT,  C_F3,   V_F4,   BS_F2,  SPC_F1, B_F5,   N_ALT,  M_CTL,  ENT_SFT
+    ),
+  /* Level 1: Numbers Layer
+   * ,-------------------------------------------------------------------------------.
+   * |   1   |   2   |   3   |   4   |   5   |   6   |   7   |   8   |   9   |   0   |
+   * |-------------------------------------------------------------------------------|
+   * |   F1  |   F2  |   F3  |   F4  |   F5  |   F6  |   F7  |   F8  |   F9  |  F10  |
+   * |-------------------------------------------------------------------------------|
+   * |       |       |       |       |  DEL  |       |       |       |       |       |
+   * '-------------------------------------------------------------------------------'
+   */
+  KEYMAP
+    ( KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0
+    , KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10
+    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_DEL, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ),
+  /* Level 2: Symbols Layer
+   * ,-------------------------------------------------------------------------------.
+   * |   !   |   @   |   #   |   $   |   %   |   ^   |   &   |   *   |   (   |   )   |
+   * |-------------------------------------------------------------------------------|
+   * |  F11  |  F12  |       |       |       |       |       |       |       |   `   |
+   * |-------------------------------------------------------------------------------|
+   * |       |       |       |       |       |       |       |       |       |       |
+   * '-------------------------------------------------------------------------------'
+   */
+  KEYMAP
+    ( KC_EXLM,KC_AT,  KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN
+    , KC_F11,  KC_F12,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_GRAVE
+    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ),
+  /* Level 3: RGB Layer
+   * ,-------------------------------------------------------------------------------.
+   * |       |       |       |       |       |   -   |   =   |   [   |   ]   |   \   |
+   * |-------------------------------------------------------------------------------|
+   * |  Tab  |       |       |       |       |   ,   |   .   |   /   |   ;   |   '   |
+   * |-------------------------------------------------------------------------------|
+   * |       |       |       |       |       |       | Left  | Down  |   Up  | Right |
+   * '-------------------------------------------------------------------------------'
+   */
+  KEYMAP
+    ( KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MINS,KC_EQL, KC_LBRC,KC_RBRC,KC_BSLS
+    , KC_TAB, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_COMM,KC_DOT, KC_SLSH,KC_SCLN,KC_QUOT
+    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT
+    ),
+  /* Level 4: RGB Layer
+   * ,-------------------------------------------------------------------------------.
+   * |       |       |       |       |       |   _   |   +   |   {   |   }   |   |   |
+   * |-------------------------------------------------------------------------------|
+   * |  Tab  |       |       |       |       |   <   |   >   |   ?   |   :   |   "   |
+   * |-------------------------------------------------------------------------------|
+   * |       |       |       |       |       |       | Home  | PgDn  |  PgUp | End  |
+   * '-------------------------------------------------------------------------------'
+   */
+  KEYMAP
+    ( KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UNDS,KC_PLUS,KC_LCBR,KC_RCBR,KC_PIPE
+    , KC_TAB, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LT,  KC_GT,  KC_QUES,KC_COLN,KC_DQUO
+    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_PGUP,KC_PGDN,KC_END
+    ),
+  /* Level 5: RGB Layer
+   * ,-------------------------------------------------------------------------------.
+   * | Calc  |  Web  | Mail  |Explore|       |       |       |       |       |       |
+   * |-------------------------------------------------------------------------------|
+   * |RGB_TOG|RGB_MOD|RGB_HUI|RGB_HUD|xxxxxxx|xxxxxxx|RGB_SAI|RGB_SAD|RGB_VAI|RGB_VAD|
+   * |-------------------------------------------------------------------------------|
+   * |       |       |       |       | Flash |       |       |       |       |       |
+   * '-------------------------------------------------------------------------------'
+   */
+  KEYMAP
+    ( KC_CALC,KC_WSCH,KC_MAIL,KC_MYCM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    , RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,KC_NO,  KC_NO,  RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD
+    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/tomato/readme.md

@@ -0,0 +1,20 @@
+Tomato
+===
+
+A 30 key keyboard with programmable rgb backlighting.
+
+* [The fluff](http://www.40percent.club/2017/07/tomato-in-gherkin.html)
+* [The meat](https://github.com/di0ib/Misc/tree/master/tomato)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Tomato PCB  
+Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.club/2017/07/tomato-in-gherkin.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tomato-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+First pass at adding support for the tomato keyboard. Completely
+untested. Intended to kick-start development.

keyboards/tomato/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/tomato/tomato.c

@@ -0,0 +1 @@
+#include "tomato.h"

keyboards/tomato/tomato.h

@@ -0,0 +1,18 @@
+#ifndef GHERKIN_H
+#define GHERKIN_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	 K00,   K01,   K02,   K03,   K04,   K05,   K10,   K11,   K12,   K13 , \
+	 K14,   K15,   K20,   K21,   K22,   K23,   K24,   K25,   K30,   K31 , \
+	 K32,   K33,   K34,   K35,   K40,   K41,   K42,   K43,   K44,   K45   \
+) { \
+	{ K00,   K01,   K02,   K03,   K04,   K05 }, \
+	{ K10,   K11,   K12,   K13,   K14,   K15 }, \
+	{ K20,   K21,   K22,   K23,   K24,   K25 }, \
+	{ K30,   K31,   K32,   K33,   K34,   K35 }, \
+	{ K40,   K41,   K42,   K43,   K44,   K45 }  \
+}
+
+#endif