Add ARM I2Cv1 support to i2c_master (#6262)

* Add ARM I2Cv1 support to i2c_master

* Add I2Cv1 docs

drivers/arm/i2c_master.c

@@ -33,11 +33,17 @@
 static uint8_t i2c_address;
 
 static const I2CConfig i2cconfig = {
+#ifdef USE_I2CV1
+  I2C1_OPMODE,
+  I2C1_CLOCK_SPEED,
+  I2C1_DUTY_CYCLE,
+#else
   STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) |
   STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) |
   STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH)  | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL),
   0,
   0
+#endif
 };
 
 static i2c_status_t chibios_to_qmk(const msg_t* status) {
@@ -61,8 +67,13 @@ void i2c_init(void)
 
   chThdSleepMilliseconds(10);
 
+#ifdef USE_I2CV1
+  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+#else
   palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
   palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#endif
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }

drivers/arm/i2c_master.h

@@ -22,10 +22,16 @@
  * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
  * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
  */
+#pragma once
 
 #include "ch.h"
 #include <hal.h>
 
+
+#if defined(STM32F1XX) || defined(STM32F1xx) || defined(STM32F2xx) || defined(STM32F4xx) || defined(STM32L0xx) || defined(STM32L1xx)
+    #define USE_I2CV1
+#endif
+
 #ifdef I2C1_BANK
     #define I2C1_SCL_BANK I2C1_BANK
     #define I2C1_SDA_BANK I2C1_BANK
@@ -46,6 +52,17 @@
     #define I2C1_SDA 7
 #endif
 
+#ifdef USE_I2CV1
+    #ifndef I2C1_OPMODE
+        #define I2C1_OPMODE OPMODE_I2C
+    #endif
+    #ifndef I2C1_CLOCK_SPEED
+        #define I2C1_CLOCK_SPEED 100000 /* 400000 */
+    #endif
+    #ifndef I2C1_DUTY_CYCLE
+        #define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+    #endif
+#else
     // The default PAL alternate modes are used to signal that the pins are used for I2C
     #ifndef I2C1_SCL_PAL_MODE
         #define I2C1_SCL_PAL_MODE 4
@@ -71,6 +88,7 @@
     #ifndef I2C1_TIMINGR_SCLL
         #define I2C1_TIMINGR_SCLL 21U
     #endif
+#endif
 
 #ifndef I2C_DRIVER
   #define I2C_DRIVER I2CD1