forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

fixed adb_usb to comply new API.

Browse Source
pull/12/head
tmk 14 years ago
parent fb8d23c60c
commit c958b2d19b
8 changed files with 76 additions and 103 deletions
Show Stats Download Patch File Download Diff File

82
adb/Makefile
Unescape View File

@ -1,82 +0,0 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = tmk_adb
# Directory common source filess exist
COMMON_DIR = ..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
TARGET_SRC = keymap.c \
matrix.c \
adb.c
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
#USB_NKRO_ENABLE = yes # USB Nkey Rollover
include $(COMMON_DIR)/Makefile.common

52
adb_usb/Makefile
Unescape View File

@ -0,0 +1,52 @@
# Target file name (without extension).
TARGET = adb_usb
# Directory common source filess exist
COMMON_DIR = ..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
TARGET_SRC = main_pjrc.c \
keymap.c \
matrix.c \
led.c \
adb.c
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
#USB_NKRO_ENABLE = yes # USB Nkey Rollover
#---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli.exe -mmcu=$(MCU) -w -v $(TARGET).hex
include $(COMMON_DIR)/Makefile.pjrc
include $(COMMON_DIR)/Makefile.common

0
adb/README → adb_usb/README
Unescape View File

14
adb/config.h → adb_usb/config.h
Unescape View File

@ -13,18 +13,21 @@
/* matrix size */
#define MATRIX_ROWS 16 // keycode bit: 3-0
#define MATRIX_COLS 8 // keycode bit: 6-4
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* USB NKey Rollover */
#ifdef USB_NKRO_ENABLE
#endif
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \
keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \
)
/* mouse keys */
#ifdef MOUSEKEY_ENABLE
# define MOUSEKEY_DELAY_TIME 192
#endif
/* PS/2 mouse */
#ifdef PS2_MOUSE_ENABLE
# define PS2_CLOCK_PORT PORTF
@ -37,6 +40,7 @@
# define PS2_DATA_BIT 1
#endif
/* ADB port setting */
#define ADB_PORT PORTF
#define ADB_PIN PINF

9
adb/keymap.c → adb_usb/keymap.c
Unescape View File

@ -9,7 +9,7 @@
#include "print.h"
#include "debug.h"
#include "util.h"
#include "keymap_skel.h"
#include "keymap.h"
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
@ -131,10 +131,3 @@ uint8_t keymap_fn_keycode(uint8_t fn_bits)
{
return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
}
// define a condition to enter special function mode
bool keymap_is_special_mode(uint8_t fn_bits)
{
//return (usb_keyboard_mods == (BIT_LCTRL | BIT_LSHIFT | BIT_LALT | BIT_LGUI));
return (usb_keyboard_mods == (BIT_RSHIFT));
}

9
adb_usb/led.c
Unescape View File

@ -0,0 +1,9 @@
#include "stdint.h"
#include "adb.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
adb_host_kbd_led(~usb_led);
}

9
adb/matrix.c → adb_usb/matrix.c
Unescape View File

@ -9,8 +9,7 @@
#include "util.h"
#include "debug.h"
#include "adb.h"
#include "usb_keyboard.h"
#include "matrix_skel.h"
#include "matrix.h"
#if (MATRIX_COLS > 16)
@ -72,12 +71,6 @@ uint8_t matrix_scan(void)
uint16_t codes;
uint8_t key0, key1;
static uint8_t prev_led = 0;
if (prev_led != usb_keyboard_leds) {
adb_host_kbd_led(~usb_keyboard_leds);
prev_led = usb_keyboard_leds;
}
_matrix_is_modified = false;
codes = adb_host_kbd_recv();
key0 = codes>>8;

4
pjrc/usb_keyboard.c
Unescape View File

@ -81,8 +81,12 @@ static inline int8_t send_report(report_keyboard_t *report, uint8_t endpoint, ui
UENUM = endpoint;
}
UEDATX = report->mods;
#ifdef USB_NKRO_ENABLE
if (!keyboard_nkro)
UEDATX = 0;
#else
UEDATX = 0;
#endif
for (uint8_t i = keys_start; i < keys_end; i++) {
UEDATX = report->keys[i];
}

Write Preview
Loading…
Cancel
Save