Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.

pull/1469/head
Dean Camera 14 years ago
parent 0d57659fa6
commit cce8760b91

@ -87,15 +87,6 @@
/* Public Interface - May be used in end-application: */ /* Public Interface - May be used in end-application: */
/* Pseudo-Functions for Doxygen: */ /* Pseudo-Functions for Doxygen: */
#if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__) #if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__)
/** Event for USB stack initialization failure. This event fires when the USB interface fails to
* initialize correctly due to a hardware or software fault.
*
* \note This event only exists on USB AVR models which support dual role modes.
*
* \param[in] ErrorCode Error code indicating the failure reason, a value in \ref USB_InitErrorCodes_t.
*/
void EVENT_USB_InitFailure(const uint8_t ErrorCode);
/** Event for USB mode pin level change. This event fires when the USB interface is set to dual role /** Event for USB mode pin level change. This event fires when the USB interface is set to dual role
* mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires * mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires
* before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect * before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect
@ -344,7 +335,6 @@
void USB_Event_Stub(void) ATTR_CONST; void USB_Event_Stub(void) ATTR_CONST;
#if defined(USB_CAN_BE_BOTH) #if defined(USB_CAN_BE_BOTH)
void EVENT_USB_InitFailure(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
#endif #endif

@ -72,16 +72,7 @@ void USB_Init(
#elif defined(USB_HOST_ONLY) #elif defined(USB_HOST_ONLY)
UHWCON &= ~(1 << UIMOD); UHWCON &= ~(1 << UIMOD);
#elif defined(USB_CAN_BE_BOTH) #elif defined(USB_CAN_BE_BOTH)
if (Mode == USB_MODE_UID) if (Mode == USB_MODE_DEVICE)
{
UHWCON |= (1 << UIDE);
USB_INT_Clear(USB_INT_IDTI);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
else if (Mode == USB_MODE_DEVICE)
{ {
UHWCON |= (1 << UIMOD); UHWCON |= (1 << UIMOD);
} }
@ -91,8 +82,7 @@ void USB_Init(
} }
else else
{ {
EVENT_USB_InitFailure(USB_INITERROR_NoUSBModeSpecified); UHWCON |= (1 << UIDE);
return;
} }
#endif #endif

@ -317,17 +317,6 @@
*/ */
void USB_ResetInterface(void); void USB_ResetInterface(void);
/* Enums: */
/** Enum for error codes relating to the powering on of the USB interface. These error codes are
* used in the ErrorCode parameter value of the \ref EVENT_USB_InitFailure() event.
*/
enum USB_InitErrorCodes_t
{
USB_INITERROR_NoUSBModeSpecified = 0, /**< Indicates that \ref USB_Init() was called with an
* invalid or missing Mode parameter.
*/
};
/* Global Variables: */ /* Global Variables: */
#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__) #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__)
/** Indicates the mode that the USB interface is currently initialized to. This value will be /** Indicates the mode that the USB interface is currently initialized to. This value will be

@ -142,8 +142,6 @@ ISR(USB_GEN_vect, ISR_BLOCK)
USB_INT_Disable(USB_INT_SUSPEND); USB_INT_Disable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_WAKEUP); USB_INT_Enable(USB_INT_WAKEUP);
Endpoint_ClearEndpoints();
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_ControlEndpointSize, ENDPOINT_DIR_OUT, USB_ControlEndpointSize,
ENDPOINT_BANK_SINGLE); ENDPOINT_BANK_SINGLE);

@ -41,6 +41,7 @@
* - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible * - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
* to free up the Start of Frame flag for interrupt use in the user application * to free up the Start of Frame flag for interrupt use in the user application
* - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany) * - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
* - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode now defaults to UID selection mode
* *
* <b>Fixed:</b> * <b>Fixed:</b>
* - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist * - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist

@ -17,6 +17,8 @@
* variables. * variables.
* - A new USB driver source file, Drivers/USB/HighLevel/PipeStream.c now exists. This source file should be added to all * - A new USB driver source file, Drivers/USB/HighLevel/PipeStream.c now exists. This source file should be added to all
* project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables. * project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables.
* - The EVENT_USB_InitFailure() event has been removed, as the USB_Init() function will no longer fail; if not USB mode is
* specified, the controller will default to UID selection mode.
* *
* <b>Device Mode</b> * <b>Device Mode</b>
* - The signature for the CALLBACK_USB_GetDescriptor() callback has changed, the "void** const DescriptorAddress" parameter is * - The signature for the CALLBACK_USB_GetDescriptor() callback has changed, the "void** const DescriptorAddress" parameter is

Loading…
Cancel
Save