Webserver project now uses the board LEDs to indicate the current IP configuration state.

Don't double-read data from the attached disk in the incomplete StandaloneProgrammer project when in host mode.

LUFA/ManPages/ChangeLog.txt

@@ -16,6 +16,7 @@
   *    for PDI and TPI programming
   *  - Increased the speed of both software and hardware TPI/PDI programming modes of the AVRISP project
   *  - Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond
+  *  - Webserver project now uses the board LEDs to indicate the current IP configuration state
   *
   *  <b>Fixed:</b>
   *  - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin

LUFA/ManPages/LUFAPoweredProjects.txt

@@ -24,6 +24,7 @@
  *  - Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/
  *  - Nanduino, a do-it-yourself AT90USB162 board: http://www.makestuff.eu/wordpress/?page_id=569
  *  - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
+ *  - U2DIL/U4DIL, a set of DIP layout USB AVR boards: http://www.reworld.eu/re/en/products/u2dil/
  *  - USB10 AKA "The Ferret", a AT90USB162 development board: http://www.soc-machines.com
  *  - USBFoo, an AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102
  * 

Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c

@@ -41,8 +41,6 @@ DRESULT disk_readp (
 		  ErrorCode = RES_NOTRDY;
 		else if (MS_Host_ReadDeviceBlocks(&DiskHost_MS_Interface, 0, sector, 1, 512, BlockTemp))
 		  ErrorCode = RES_ERROR;
-
-		MS_Host_ReadDeviceBlocks(&DiskHost_MS_Interface, 0, sector, 1, 512, BlockTemp);
 		#endif
 	}
 	else

Projects/Webserver/Lib/DHCPClientApp.c

@@ -156,6 +156,9 @@ void DHCPClientApp_Callback(void)
 				uip_setnetmask((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.Netmask);
 				uip_setdraddr((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.GatewayIP);
 			
+				/* Indicate to the user that we now have a valid IP configuration */
+				HaveIPConfiguration = true;
+
 				AppState->DHCPClient.CurrentState = DHCP_STATE_AddressLeased;				
 			}
 			

Projects/Webserver/Lib/HTTPServerApp.c

@@ -77,7 +77,7 @@ const MIME_Type_t MIMETypes[] =
 		{.Extension = "pdf", .MIMEType = "application/pdf"},
 	};
 
-/** FAT Fs structure to hold the internal state of the FAT driver for the dataflash contents. */
+/** FATFs structure to hold the internal state of the FAT driver for the dataflash contents. */
 FATFS DiskFATState;
 
 

Projects/Webserver/Lib/uIPManagement.c

@@ -46,6 +46,7 @@ struct timer ARPTimer;
 /** MAC address of the RNDIS device, when enumerated */
 struct uip_eth_addr MACAddress;
 
+bool HaveIPConfiguration;
 
 /** Configures the uIP stack ready for network traffic. */
 void uIPManagement_Init(void)
@@ -62,8 +63,10 @@ void uIPManagement_Init(void)
 
 	/* DHCP/Server IP Settings Initialization */
 	#if defined(ENABLE_DHCP_CLIENT)
+	HaveIPConfiguration = false;
 	DHCPClientApp_Init();
 	#else
+	HaveIPConfiguration = true;
 	uip_ipaddr_t IPAddress, Netmask, GatewayIPAddress;
 	uip_ipaddr(&IPAddress,        DEVICE_IP_ADDRESS[0], DEVICE_IP_ADDRESS[1], DEVICE_IP_ADDRESS[2], DEVICE_IP_ADDRESS[3]);
 	uip_ipaddr(&Netmask,          DEVICE_NETMASK[0],    DEVICE_NETMASK[1],    DEVICE_NETMASK[2],    DEVICE_NETMASK[3]);
@@ -169,7 +172,7 @@ static void uIPManagement_ProcessIncomingPacket(void)
 		}
 	}
 
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+	LEDs_SetAllLEDs(LEDMASK_USB_READY | ((HaveIPConfiguration) ? LEDMASK_UIP_READY : LEDMASK_UIP_READY_NOCONFIG));
 }
 
 /** Manages the currently open network connections, including TCP and (if enabled) UDP. */

Projects/Webserver/Lib/uIPManagement.h

@@ -63,6 +63,8 @@
 	/* External Variables: */
 		extern struct uip_eth_addr MACAddress;
 		
+		extern bool HaveIPConfiguration;
+		
 	/* Function Prototypes: */
 		void uIPManagement_Init(void);
 		void uIPManagement_ManageNetwork(void);

Projects/Webserver/Webserver.h

@@ -56,16 +56,22 @@
 		#define LEDMASK_USB_NOTREADY          LEDS_LED1
 
 		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+		#define LEDMASK_USB_ENUMERATING      (LEDS_LED1 | LEDS_LED2)
 
 		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+		#define LEDMASK_USB_READY             LEDS_LED2
 
 		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
 		#define LEDMASK_USB_ERROR            (LEDS_LED1 | LEDS_LED3)
 		
 		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
+		#define LEDMASK_USB_BUSY             (LEDS_LED1 | LEDS_LED3 | LEDS_LED4)
+
+		/** LED mask for the uIP stack idling with no IP configuration */
+		#define LEDMASK_UIP_READY_NOCONFIG    LEDS_LED3
+
+		/** LED mask for the uIP stack idling with a valid IP configuration */
+		#define LEDMASK_UIP_READY_CONFIG      LEDS_LED4
 
 	/* Function Prototypes: */
 		void SetupHardware(void);

makefile

@@ -13,18 +13,14 @@
 # "make doxygen" to document everything with DoxyGen (if installed) and
 # "make clean_doxygen" to remove generated Doxygen documentation from everything.
 
-# It is suggested that for the master build, the --quiet switch is passed to make,
-# to remove all the commands from the output. This gives a much easier to read
-# report of the entire build process.
-
 all:
 
 %:
 	@echo Executing \"make $@\" on all LUFA library elements.
 	@echo
-	make -C LUFA/ $@
+	make -C LUFA/ $@ -s
-	make -C Demos/ $@
+	make -C Demos/ $@ -s
-	make -C Projects/ $@
+	make -C Projects/ $@ -s
-	make -C Bootloaders/ $@
+	make -C Bootloaders/ $@ -s
 	@echo
 	@echo LUFA \"make $@\" operation complete.