forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

AVRISP programmer project now has a more robust timeout system, allowing for a doubling of the software USART speed for PDI and TPI programming.

Browse Source
pull/1469/head
Dean Camera 15 years ago
parent 04d40897cf
commit ce8d0424b1
8 changed files with 122 additions and 66 deletions
Show Stats Download Patch File Download Diff File

10
LUFA/ManPages/ChangeLog.txt
Unescape View File

@ -8,6 +8,16 @@
*
* \section Sec_ChangeLogXXXXXX Version XXXXXX
*
* <b>New:</b>
* - (None)
*
* <b>Changed:</b>
* - AVRISP programmer project now has a more robust timeout system, allowing for a doubling of the software USART speed
* for PDI and TPI programming
*
* <b>Fixed:</b>
* - (None)
*
* \section Sec_ChangeLog100219 Version 100219
*
* <b>New:</b>

1
LUFA/ManPages/MigrationInformation.txt
Unescape View File

@ -13,6 +13,7 @@
* \section Sec_MigrationXXXXXX Migrating from 100219 to XXXXXX
*
* \section Sec_Migration100219 Migrating from 091223 to 100219
* - (None)
*
* <b>Non-USB Library Components</b>
* - Due to some ADC channels not being identical to their ADC MUX selection masks for single-ended conversions on some AVR models,

15
Projects/AVRISP-MKII/Lib/V2Protocol.c
Unescape View File

@ -42,14 +42,6 @@ uint32_t CurrentAddress;
/** Flag to indicate that the next read/write operation must update the device's current address */
bool MustSetAddress;
/** ISR for the management of the command execution timeout counter */
ISR(TIMER0_COMPA_vect, ISR_BLOCK)
{
if (TimeoutMSRemaining)
TimeoutMSRemaining--;
}
/** Initializes the hardware and software associated with the V2 protocol command handling. */
void V2Protocol_Init(void)
{
@ -76,10 +68,6 @@ void V2Protocol_ProcessCommand(void)
{
uint8_t V2Command = Endpoint_Read_Byte();
/* Set total command processing timeout value, enable timeout management interrupt */
TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
TIMSK0 |= (1 << OCIE0A);
switch (V2Command)
{
case CMD_SIGN_ON:
@ -140,9 +128,6 @@ void V2Protocol_ProcessCommand(void)
break;
}
/* Disable timeout management interrupt once processing has completed */
TIMSK0 &= ~(1 << OCIE0A);
Endpoint_WaitUntilReady();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
}

6
Projects/AVRISP-MKII/Lib/V2Protocol.h
Unescape View File

@ -64,12 +64,6 @@
/** Programmer ID string, returned to the host during the CMD_SIGN_ON command processing */
#define PROGRAMMER_ID "AVRISP_MK2"
/** Timeout period for each issued command from the host before it is aborted */
#define COMMAND_TIMEOUT_MS 200
/** Command timeout counter register, GPIOR for speed */
#define TimeoutMSRemaining GPIOR0
/** MUX mask for the VTARGET ADC channel number */
#define VTARGET_ADC_CHANNEL_MASK _GETADCMUXMASK(ADC_CHANNEL, VTARGET_ADC_CHANNEL)

18
Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
Unescape View File

@ -77,14 +77,19 @@ static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
bool TINYNVM_WaitWhileNVMBusBusy(void)
{
/* Poll the STATUS register to check to see if NVM access has been enabled */
uint8_t TimeoutMSRemaining = 100;
while (TimeoutMSRemaining)
{
/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)
{
TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
return true;
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}
@ -99,6 +104,7 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
bool TINYNVM_WaitWhileNVMControllerBusy(void)
{
/* Poll the STATUS register to check to see if NVM access has been enabled */
uint8_t TimeoutMSRemaining = 100;
while (TimeoutMSRemaining)
{
/* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
@ -106,9 +112,13 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
/* Check to see if the BUSY flag is still set */
if (!(XPROGTarget_ReceiveByte() & (1 << 7)))
{
TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
return true;
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}

18
Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
Unescape View File

@ -72,14 +72,19 @@ static void XMEGANVM_SendNVMRegAddress(const uint8_t Register)
bool XMEGANVM_WaitWhileNVMBusBusy(void)
{
/* Poll the STATUS register to check to see if NVM access has been enabled */
uint8_t TimeoutMSRemaining = 100;
while (TimeoutMSRemaining)
{
/* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);
if (XPROGTarget_ReceiveByte() & PDI_STATUS_NVM)
{
TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
return true;
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}
@ -94,6 +99,7 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
bool XMEGANVM_WaitWhileNVMControllerBusy(void)
{
/* Poll the NVM STATUS register while the NVM controller is busy */
uint8_t TimeoutMSRemaining = 100;
while (TimeoutMSRemaining)
{
/* Send a LDS command to read the NVM STATUS register to check the BUSY flag */
@ -102,9 +108,13 @@ bool XMEGANVM_WaitWhileNVMControllerBusy(void)
/* Check to see if the BUSY flag is still set */
if (!(XPROGTarget_ReceiveByte() & (1 << 7)))
{
TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
return true;
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}

64
Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
Unescape View File

@ -49,19 +49,18 @@ volatile uint16_t SoftUSART_Data;
#define SoftUSART_BitCount GPIOR2
/** ISR to manage the PDI software USART when bit-banged PDI USART mode is selected. */
/** ISR to manage the rising edge of the PDI/TPI software USART when bit-banged USART mode is selected. */
ISR(TIMER1_COMPA_vect, ISR_BLOCK)
{
/* Toggle CLOCK pin in a single cycle (see AVR datasheet) */
BITBANG_PDICLOCK_PIN |= BITBANG_PDICLOCK_MASK;
TIFR1 |= (1 << OCF1B);
TIMSK1 = (1 << OCIE1B);
/* If not sending or receiving, just exit */
if (!(SoftUSART_BitCount))
return;
/* Check to see if we are at a rising or falling edge of the clock */
if (BITBANG_PDICLOCK_PORT & BITBANG_PDICLOCK_MASK)
{
/* If at rising clock edge and we are in send mode, abort */
if (IsSending)
return;
@ -78,8 +77,19 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
SoftUSART_Data >>= 1;
SoftUSART_BitCount--;
}
else
/** ISR to manage the falling edge of the PDI/TPI software USART when bit-banged USART mode is selected. */
ISR(TIMER1_COMPB_vect, ISR_BLOCK)
{
/* Toggle CLOCK pin in a single cycle (see AVR datasheet) */
BITBANG_PDICLOCK_PIN |= BITBANG_PDICLOCK_MASK;
TIFR1 |= (1 << OCF1A);
TIMSK1 = (1 << OCIE1A);
/* If not sending or receiving, just exit */
if (!(SoftUSART_BitCount))
return;
/* If at falling clock edge and we are in receive mode, abort */
if (!IsSending)
return;
@ -93,7 +103,6 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
SoftUSART_Data >>= 1;
SoftUSART_BitCount--;
}
}
/** ISR to manage the TPI software USART when bit-banged TPI USART mode is selected. */
ISR(TIMER1_CAPT_vect, ISR_BLOCK)
@ -172,7 +181,9 @@ void XPROGTarget_EnableTargetPDI(void)
/* Fire timer compare channel A ISR to manage the software USART */
OCR1A = BITS_BETWEEN_USART_CLOCKS;
OCR1B = BITS_BETWEEN_USART_CLOCKS;
TCCR1B = (1 << WGM12) | (1 << CS10);
TCCR1C = (1 << FOC1B);
TIMSK1 = (1 << OCIE1A);
#endif
@ -240,6 +251,10 @@ void XPROGTarget_DisableTargetPDI(void)
DDRD &= ~((1 << 5) | (1 << 3));
PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
#else
/* Turn off software USART management timer */
TCCR1B = 0;
TCCR1C = 0;
/* Set /RESET high for a one millisecond to ensure target device is restarted */
BITBANG_PDICLOCK_PORT |= BITBANG_PDICLOCK_MASK;
_delay_ms(1);
@ -270,6 +285,9 @@ void XPROGTarget_DisableTargetTPI(void)
DDRD &= ~((1 << 5) | (1 << 3));
PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
#else
/* Turn off software USART management timer */
TCCR1B = 0;
/* Set DATA and CLOCK lines to inputs */
BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK;
BITBANG_TPICLOCK_DDR &= ~BITBANG_TPICLOCK_MASK;
@ -332,12 +350,31 @@ uint8_t XPROGTarget_ReceiveByte(void)
#if defined(XPROG_VIA_HARDWARE_USART)
/* Wait until a byte has been received before reading */
while (!(UCSR1A & (1 << RXC1)) && TimeoutMSRemaining);
uint8_t TimeoutMSRemaining = 100;
while (!(UCSR1A & (1 << RXC1)) && TimeoutMSRemaining)
{
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}
return UDR1;
#else
/* Wait until a byte has been received before reading */
SoftUSART_BitCount = BITS_IN_USART_FRAME;
while (SoftUSART_BitCount && TimeoutMSRemaining);
uint8_t TimeoutMSRemaining = 100;
while (SoftUSART_BitCount && TimeoutMSRemaining)
{
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}
/* Throw away the parity and stop bits to leave only the data (start bit is already discarded) */
return (uint8_t)SoftUSART_Data;
@ -431,7 +468,16 @@ static void XPROGTarget_SetRxMode(void)
}
/* Wait until DATA line has been pulled up to idle by the target */
while (!(BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK) && TimeoutMSRemaining);
uint8_t TimeoutMSRemaining = 100;
while (!(BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK) && TimeoutMSRemaining)
{
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}
#endif
IsSending = false;

2
Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
Unescape View File

@ -81,7 +81,7 @@
#endif
/** Number of cycles between each clock when software USART mode is used */
#define BITS_BETWEEN_USART_CLOCKS 200
#define BITS_BETWEEN_USART_CLOCKS 100
/** Total number of bits in a single USART frame */
#define BITS_IN_USART_FRAME 12

Write Preview
Loading…
Cancel
Save