Make sure that the NVM bus/controller busy waits in the AVRISP MKII clone project abort properly if a timeout occurs while waiting for a response.

pull/1469/head
Dean Camera 15 years ago
parent 9cad677ebb
commit ceb16ee24f

@ -81,7 +81,15 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
{ {
/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */ /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG); XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (!(TimeoutMSRemaining))
return false;
/* Check the status register read response to see if the NVM bus is enabled */
if (StatusRegister & TPI_STATUS_NVM)
{ {
TimeoutMSRemaining = COMMAND_TIMEOUT_MS; TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
return true; return true;
@ -111,8 +119,14 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
/* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */ /* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr); TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (!(TimeoutMSRemaining))
return false;
/* Check to see if the BUSY flag is still set */ /* Check to see if the BUSY flag is still set */
if (!(XPROGTarget_ReceiveByte() & (1 << 7))) if (!(StatusRegister & (1 << 7)))
{ {
TimeoutMSRemaining = COMMAND_TIMEOUT_MS; TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
return true; return true;

@ -76,7 +76,15 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
{ {
/* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */ /* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG); XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);
if (XPROGTarget_ReceiveByte() & PDI_STATUS_NVM)
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (!(TimeoutMSRemaining))
return false;
/* Check the status register read response to see if the NVM bus is enabled */
if (StatusRegister & PDI_STATUS_NVM)
{ {
TimeoutMSRemaining = COMMAND_TIMEOUT_MS; TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
return true; return true;
@ -107,8 +115,14 @@ bool XMEGANVM_WaitWhileNVMControllerBusy(void)
XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2)); XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS); XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS);
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
/* We might have timed out waiting for the status register read response, check here */
if (!(TimeoutMSRemaining))
return false;
/* Check to see if the BUSY flag is still set */ /* Check to see if the BUSY flag is still set */
if (!(XPROGTarget_ReceiveByte() & (1 << 7))) if (!(StatusRegister & (1 << 7)))
{ {
TimeoutMSRemaining = COMMAND_TIMEOUT_MS; TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
return true; return true;

@ -453,22 +453,33 @@ static void XPROGTarget_SetRxMode(void)
{ {
BITBANG_PDIDATA_DDR &= ~BITBANG_PDIDATA_MASK; BITBANG_PDIDATA_DDR &= ~BITBANG_PDIDATA_MASK;
BITBANG_PDIDATA_PORT &= ~BITBANG_PDIDATA_MASK; BITBANG_PDIDATA_PORT &= ~BITBANG_PDIDATA_MASK;
/* Wait until DATA line has been pulled up to idle by the target */
while (!(BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK) && TimeoutMSRemaining)
{
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}
} }
else else
{ {
BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK; BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK;
BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK; BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
}
/* Wait until DATA line has been pulled up to idle by the target */
/* Wait until DATA line has been pulled up to idle by the target */ while (!(BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK) && TimeoutMSRemaining)
while (!(BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK) && TimeoutMSRemaining)
{
/* Manage software timeout */
if (TIFR0 & (1 << OCF0A))
{ {
TIFR0 |= (1 << OCF0A); /* Manage software timeout */
TimeoutMSRemaining--; if (TIFR0 & (1 << OCF0A))
} {
TIFR0 |= (1 << OCF0A);
TimeoutMSRemaining--;
}
}
} }
#endif #endif

Loading…
Cancel
Save