Make all AVRISP-MKII programmer parameters readable, since there's no real good reason to restrict parameter reads. Fix misspelt target reset polarity EEPROM variable.

pull/1469/head
Dean Camera 13 years ago
parent bc3db793e9
commit dd312cead4

@ -515,7 +515,9 @@ void ISPProtocol_SPIMulti(void)
}
}
/** Blocking delay for a given number of milliseconds.
/** Blocking delay for a given number of milliseconds. This provides a simple wrapper around
* the avr-libc provided delay function, so that the delay function can be called with a
* constant value (to prevent run-time floating point operations being required).
*
* \param[in] DelayMS Number of milliseconds to delay for
*/

@ -37,7 +37,7 @@
#include "V2ProtocolParams.h"
/* Non-Volatile Parameter Values for EEPROM storage */
static uint8_t EEMEM EEPROM_Rest_Polarity = 0x00;
static uint8_t EEMEM EEPROM_Reset_Polarity = 0x00;
/* Volatile Parameter Values for RAM storage */
static ParameterItem_t ParameterTable[] =
@ -71,7 +71,7 @@ static ParameterItem_t ParameterTable[] =
.ParamValue = 6 },
{ .ParamID = PARAM_RESET_POLARITY,
.ParamPrivileges = PARAM_PRIV_WRITE,
.ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE,
.ParamValue = 0x01 },
{ .ParamID = PARAM_STATUS_TGT_CONN,
@ -79,7 +79,7 @@ static ParameterItem_t ParameterTable[] =
.ParamValue = STATUS_ISP_READY },
{ .ParamID = PARAM_DISCHARGEDELAY,
.ParamPrivileges = PARAM_PRIV_WRITE,
.ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE,
.ParamValue = 0x00 },
};
@ -88,7 +88,7 @@ static ParameterItem_t ParameterTable[] =
void V2Params_LoadNonVolatileParamValues(void)
{
/* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM */
V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Rest_Polarity);
V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Reset_Polarity);
}
/** Updates any parameter values that are sourced from hardware rather than explicitly set by the host, such as
@ -163,7 +163,7 @@ void V2Params_SetParameterValue(const uint8_t ParamID,
/* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
if (ParamID == PARAM_RESET_POLARITY)
eeprom_update_byte(&EEPROM_Rest_Polarity, Value);
eeprom_update_byte(&EEPROM_Reset_Polarity, Value);
}
/** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given

Loading…
Cancel
Save