Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint.

Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor.

Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption.

Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().

Bootloaders/CDC/makefile

@@ -206,10 +206,6 @@ CFLAGS += -ffunction-sections
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
 CFLAGS += -fno-inline-small-functions
-CFLAGS += -fno-reorder-blocks
-CFLAGS += -fno-reorder-blocks-and-partition
-CFLAGS += -fno-reorder-functions
-CFLAGS += -fno-toplevel-reorder
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
 CFLAGS += -Wundef

Bootloaders/DFU/makefile

@@ -207,10 +207,6 @@ CFLAGS += -fdata-sections
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
 CFLAGS += -fno-inline-small-functions
-CFLAGS += -fno-reorder-blocks
-CFLAGS += -fno-reorder-blocks-and-partition
-CFLAGS += -fno-reorder-functions
-CFLAGS += -fno-toplevel-reorder
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
 CFLAGS += -Wundef

Bootloaders/TeensyHID/makefile

@@ -206,10 +206,6 @@ CFLAGS += -ffunction-sections
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
 CFLAGS += -fno-inline-small-functions
-CFLAGS += -fno-reorder-blocks
-CFLAGS += -fno-reorder-blocks-and-partition
-CFLAGS += -fno-reorder-functions
-CFLAGS += -fno-toplevel-reorder
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
 CFLAGS += -Wundef

Demos/Host/ClassDriver/MassStorageHost/Lib/MassStoreCommands.c

@@ -134,7 +134,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
 		if (Pipe_IsStalled())
 		{
 			/* Clear the stall condition on the OUT pipe */
-			MassStore_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);
+			USB_Host_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);
 
 			return PIPE_RWSTREAM_PipeStalled;
 		}
@@ -147,7 +147,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
 		if (Pipe_IsStalled())
 		{
 			/* Clear the stall condition on the IN pipe */
-			MassStore_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);
+			USB_Host_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);
 
 			return PIPE_RWSTREAM_PipeStalled;
 		}

Demos/Host/ClassDriver/MassStorageHost/Lib/MassStoreCommands.h

@@ -158,7 +158,6 @@
 			static uint8_t MassStore_GetReturnedStatus(void);
 		#endif
 		
-		uint8_t MassStore_ClearPipeStall(const uint8_t EndpointNum);
 		uint8_t MassStore_MassStorageReset(void);
 		uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex);
 		uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_Response_t* const SensePtr)

Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c

@@ -144,22 +144,12 @@ void Bluetooth_Management_Task(void)
 			}
 
 			puts_P(PSTR("Bluetooth Dongle Detected.\r\n"));
-
-			/* Standard request to set the device configuration to configuration 1 */
-			USB_ControlRequest = (USB_Request_Header_t)
-				{
-					bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
-					bRequest:      REQ_SetConfiguration,
-					wValue:        1,
-					wIndex:        0,
-					wLength:       0,
-				};
 				
 			/* Select the control pipe for the request transfer */
 			Pipe_SelectPipe(PIPE_CONTROLPIPE);
 
-			/* Send the request, display error and wait for device detatch if request fails */
-			if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
+			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
 			{
 				puts_P(PSTR("Control Error (Set Configuration).\r\n"));
 				printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);

Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c

@@ -134,7 +134,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
 		if (Pipe_IsStalled())
 		{
 			/* Clear the stall condition on the OUT pipe */
-			MassStore_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);
+			USB_Host_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);
 
 			return PIPE_RWSTREAM_PipeStalled;
 		}
@@ -147,7 +147,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
 		if (Pipe_IsStalled())
 		{
 			/* Clear the stall condition on the IN pipe */
-			MassStore_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);
+			USB_Host_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);
 
 			return PIPE_RWSTREAM_PipeStalled;
 		}
@@ -243,29 +243,6 @@ static uint8_t MassStore_GetReturnedStatus(void)
 	return PIPE_RWSTREAM_NoError;
 }
 
-/** Clears the stall condition in the attached device on the nominated endpoint number.
- *
- *  \param EndpointNum  Endpoint number in the attached device whose stall condition is to be cleared
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum
- */
-uint8_t MassStore_ClearPipeStall(const uint8_t EndpointNum)
-{
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
-			.bRequest      = REQ_ClearFeature,
-			.wValue        = FEATURE_ENDPOINT_HALT,
-			.wIndex        = EndpointNum,
-			.wLength       = 0,
-		};
-	
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	return USB_Host_SendControlRequest(NULL);
-}
-
 /** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface,
  *  readying the device for the next CBW.
  *

Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.h

@@ -158,7 +158,6 @@
 			static uint8_t MassStore_GetReturnedStatus(void);
 		#endif
 		
-		uint8_t MassStore_ClearPipeStall(const uint8_t EndpointNum);
 		uint8_t MassStore_MassStorageReset(void);
 		uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex);
 		uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_Response_t* const SensePtr)

LUFA/Drivers/USB/HighLevel/USBTask.h

@@ -116,6 +116,8 @@
 			 *
 			 *  \note This global is only present if the user application can be a USB host.
 			 *
+			 *  \see \ref USB_Host_States_t for a list of possible host states
+			 *
 			 *  \ingroup Group_Host
 			 */
 			extern volatile uint8_t USB_HostState;

LUFA/Drivers/USB/LowLevel/Host.c

@@ -302,4 +302,39 @@ uint8_t USB_Host_SetDeviceConfiguration(uint8_t ConfigNumber)
 	return USB_Host_SendControlRequest(NULL);
 }
 
+uint8_t USB_Host_GetDeviceDescriptor(USB_Descriptor_Device_t* DeviceDescriptorPtr)
+{
+	USB_ControlRequest = (USB_Request_Header_t)
+		{
+			bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
+			bRequest:      REQ_GetDescriptor,
+			wValue:        (DTYPE_Device << 8),
+			wIndex:        0,
+			wLength:       sizeof(USB_Descriptor_Device_t),
+		};
+
+	Pipe_SelectPipe(PIPE_CONTROLPIPE);
+	
+	return USB_Host_SendControlRequest(DeviceDescriptorPtr);
+}
+
+uint8_t USB_Host_ClearPipeStall(uint8_t EndpointNum)
+{
+	if (Pipe_GetPipeToken() == PIPE_TOKEN_IN)
+	  EndpointNum |= (1 << 7);
+
+	USB_ControlRequest = (USB_Request_Header_t)
+		{
+			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
+			.bRequest      = REQ_ClearFeature,
+			.wValue        = FEATURE_ENDPOINT_HALT,
+			.wIndex        = EndpointNum,
+			.wLength       = 0,
+		};
+
+	Pipe_SelectPipe(PIPE_CONTROLPIPE);
+	
+	return USB_Host_SendControlRequest(NULL);
+}
+
 #endif

LUFA/Drivers/USB/LowLevel/Host.h

@@ -47,6 +47,8 @@
 
 		#include "../../../Common/Common.h"
 		#include "../HighLevel/USBInterrupt.h"
+		#include "../HighLevel/StdDescriptors.h"
+		#include "Pipe.h"
 
 	/* Enable C linkage for C++ Compilers: */
 		#if defined(__cplusplus)
@@ -185,6 +187,29 @@
 			 *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
 			 */
 			uint8_t USB_Host_SetDeviceConfiguration(uint8_t ConfigNumber);
+			
+			/** Convenience function. This routine sends a GetDescriptor standard request to the attached
+			 *  device, requesting the device descriptor. This can be used to easily retrieve information
+			 *  about the device such as its VID, PID and power requirements.
+			 *
+			 *  \note After this routine returns, the control pipe will be selected.
+			 *
+			 *  \param DeviceDescriptorPtr  Pointer to the destination device descriptor structure where
+			 *                              the read data is to be stored
+			 *
+			 *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
+			 */
+			uint8_t USB_Host_GetDeviceDescriptor(USB_Descriptor_Device_t* DeviceDescriptorPtr);
+			
+			/** Clears a stall condition on the given pipe, via a ClearFeature request to the attached device.
+			 *
+			 *  \note After this routine returns, the control pipe will be selected.
+			 *
+			 *  \param EndpointIndex  Index of the endpoint to clear
+			 *
+			 *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
+			 */			
+			uint8_t USB_Host_ClearPipeStall(uint8_t EndpointIndex);
 
 		/* Enums: */
 			/** Enum for the various states of the USB Host state machine. Only some states are

LUFA/Drivers/USB/LowLevel/Pipe.c

@@ -45,7 +45,7 @@ bool Pipe_ConfigurePipe(const uint8_t Number, const uint8_t Type, const uint8_t
 
 	UPCFG1X = 0;
 	
-	UPCFG0X = ((Type << EPTYPE0) | Token | (EndpointNumber << PEPNUM0));
+	UPCFG0X = ((Type << EPTYPE0) | Token | ((EndpointNumber & PIPE_EPNUM_MASK) << PEPNUM0));
 	UPCFG1X = ((1 << ALLOC) | Banks | Pipe_BytesToEPSizeMask(Size));
 
 	return Pipe_IsConfigured();

LUFA/Drivers/USB/LowLevel/Pipe.h

@@ -219,7 +219,7 @@
 				 *
 				 *  \return The current pipe token, as a PIPE_TOKEN_* mask
 				 */
-				static inline uint8_t Pipe_GetCurrentToken(void);
+				static inline uint8_t Pipe_GetPipeToken(void);
 				
 				/** Sets the token for the currently selected pipe to one of the tokens specified by the PIPE_TOKEN_*
 				 *  masks. This can be used on CONTROL type pipes, to allow for bidirectional transfer of data during

LUFA/ManPages/ChangeLog.txt

@@ -20,8 +20,13 @@
   *    internal control
   *  - Added new USB_Host_SetDeviceConfiguration() convenience function for easy configuration selection of devices while in USB
   *    host mode
+  *  - Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint
+  *  - Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor
   *  - Added USB Missle Launcher project, submitted by Dave Fletcher
   *  - Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors
+  *  - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is
+  *    cleared to prevent endpoint type corruption
+  *  - Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken()
   *
   *
   *  \section Sec_ChangeLog090605 Version 090605

LUFA/ManPages/FutureChanges.txt

@@ -21,4 +21,7 @@
   *  - Port LUFA to the Atmel ARM7 series microcontrollers
   *  - Remake AVRStudio project files
   *  - Master LUFA include file
+  *  - Debug mode for pipe/endpoint calls
+  *  - Device descriptor get routines
+  *  - Add ClearPipeStall host function
   */