forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Minor documentation fixes - change \note entries to \warning where appropriate and remove/update old documentation.

Browse Source
pull/1469/head
Dean Camera 13 years ago
parent 5561524a8f
commit e406140f11
32 changed files with 134 additions and 158 deletions
Show Stats Download Patch File Download Diff File

4
LUFA/Common/Common.h
Unescape View File

@ -153,7 +153,7 @@
/** Convenience macro to determine the larger of two values. /** Convenience macro to determine the larger of two values.
* *
* \note This macro should only be used with operands that do not have side effects from being evaluated * \attention This macro should only be used with operands that do not have side effects from being evaluated
* multiple times. * multiple times.
* *
* \param[in] x First value to compare * \param[in] x First value to compare
@ -167,7 +167,7 @@
/** Convenience macro to determine the smaller of two values. /** Convenience macro to determine the smaller of two values.
* *
* \note This macro should only be used with operands that do not have side effects from being evaluated * \attention This macro should only be used with operands that do not have side effects from being evaluated
* multiple times. * multiple times.
* *
* \param[in] x First value to compare * \param[in] x First value to compare

2
LUFA/DoxygenPages/CompileTimeTokens.txt
Unescape View File

@ -210,7 +210,7 @@
* If enabled, this will indicate that the USB target VBUS line polarity is inverted; i.e. it should be pulled low to enable VBUS to the * If enabled, this will indicate that the USB target VBUS line polarity is inverted; i.e. it should be pulled low to enable VBUS to the
* target, and pulled high to stop the target VBUS generation. * target, and pulled high to stop the target VBUS generation.
* *
* \note On AVR8 architecture devices, this compile time option requires \c NO_AUTO_VBUS_MANAGEMENT to be set. * \attention On AVR8 architecture devices, this compile time option requires \c NO_AUTO_VBUS_MANAGEMENT to be set.
* *
* - <b>NO_AUTO_VBUS_MANAGEMENT</b> - (\ref Group_Host) - <i>All Architectures</i> \n * - <b>NO_AUTO_VBUS_MANAGEMENT</b> - (\ref Group_Host) - <i>All Architectures</i> \n
* Disables the automatic management of VBUS to the target, i.e. automatic shut down in the even of an overcurrent situation. When enabled, VBUS * Disables the automatic management of VBUS to the target, i.e. automatic shut down in the even of an overcurrent situation. When enabled, VBUS

1
LUFA/DoxygenPages/LUFAPoweredProjects.txt
Unescape View File

@ -89,6 +89,7 @@
* - PSGroove, a Playstation 3 Homebrew dongle: http://github.com/psgroove * - PSGroove, a Playstation 3 Homebrew dongle: http://github.com/psgroove
* - PS/2 to USB adapter: https://github.com/makestuff/p2ukbd * - PS/2 to USB adapter: https://github.com/makestuff/p2ukbd
* - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/ * - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/
* - RFPirate, a RF experimentation platform: https://github.com/ebuller/RF-Pirate
* - RF Transciever using the MRF49XA: http://alternet.us.com/?page_id=1494 * - RF Transciever using the MRF49XA: http://alternet.us.com/?page_id=1494
* - SD Card reader: http://elasticsheep.com/2010/04/teensy2-usb-mass-storage-with-an-sd-card/ * - SD Card reader: http://elasticsheep.com/2010/04/teensy2-usb-mass-storage-with-an-sd-card/
* - SDR1, a Software Defined Radio firmware: https://code.google.com/p/sdr-mk1/ * - SDR1, a Software Defined Radio firmware: https://code.google.com/p/sdr-mk1/

4
LUFA/Drivers/Misc/RingBuffer.h
Unescape View File

@ -225,7 +225,7 @@
/** Inserts an element into the ring buffer. /** Inserts an element into the ring buffer.
* *
* \note Only one execution thread (main program thread or an ISR) may insert into a single buffer * \warning Only one execution thread (main program thread or an ISR) may insert into a single buffer
* otherwise data corruption may occur. Insertion and removal may occur from different execution * otherwise data corruption may occur. Insertion and removal may occur from different execution
* threads. * threads.
* *
@ -252,7 +252,7 @@
/** Removes an element from the ring buffer. /** Removes an element from the ring buffer.
* *
* \note Only one execution thread (main program thread or an ISR) may remove from a single buffer * \warning Only one execution thread (main program thread or an ISR) may remove from a single buffer
* otherwise data corruption may occur. Insertion and removal may occur from different execution * otherwise data corruption may occur. Insertion and removal may occur from different execution
* threads. * threads.
* *

8
LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
Unescape View File

@ -253,7 +253,7 @@
/** Retrieves the ADC MUX mask for the given ADC channel number. /** Retrieves the ADC MUX mask for the given ADC channel number.
* *
* \note This macro will only work correctly on channel numbers that are compile-time * \attention This macro will only work correctly on channel numbers that are compile-time
* constants defined by the preprocessor. * constants defined by the preprocessor.
* *
* \param[in] Channel Index of the ADC channel whose MUX mask is to be retrieved. * \param[in] Channel Index of the ADC channel whose MUX mask is to be retrieved.
@ -268,9 +268,8 @@
* *
* \note This must only be called for ADC channels with are connected to a physical port * \note This must only be called for ADC channels with are connected to a physical port
* pin of the AVR, denoted by its special alternative function ADCx. * pin of the AVR, denoted by its special alternative function ADCx.
* \n\n
* *
* \note The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask. * \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
* *
* \param[in] ChannelIndex ADC channel number to set up for conversions. * \param[in] ChannelIndex ADC channel number to set up for conversions.
*/ */
@ -311,9 +310,8 @@
* *
* \note This must only be called for ADC channels with are connected to a physical port * \note This must only be called for ADC channels with are connected to a physical port
* pin of the AVR, denoted by its special alternative function ADCx. * pin of the AVR, denoted by its special alternative function ADCx.
* \n\n
* *
* \note The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask. * \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
* *
* \param[in] ChannelIndex ADC channel number to set up for conversions. * \param[in] ChannelIndex ADC channel number to set up for conversions.
*/ */

2
LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
Unescape View File

@ -196,7 +196,7 @@
* *
* The generated SCL frequency will be according to the formula <pre>F_CPU / (16 + 2 * BitLength + 4 ^ Prescale)</pre>. * The generated SCL frequency will be according to the formula <pre>F_CPU / (16 + 2 * BitLength + 4 ^ Prescale)</pre>.
* *
* \note The value of the \c BitLength parameter should not be set below 10 or invalid bus conditions may * \attention The value of the \c BitLength parameter should not be set below 10 or invalid bus conditions may
* occur, as indicated in the AVR8 microcontroller datasheet. * occur, as indicated in the AVR8 microcontroller datasheet.
* *
* \param[in] Prescale Prescaler to use when determining the bus frequency, a \c TWI_BIT_PRESCALE_* value. * \param[in] Prescale Prescaler to use when determining the bus frequency, a \c TWI_BIT_PRESCALE_* value.

4
LUFA/Drivers/USB/Class/Common/AudioClassCommon.h
Unescape View File

@ -583,7 +583,7 @@
* about the number of channels, the sample resolution, acceptable sample frequencies and encoding method used * about the number of channels, the sample resolution, acceptable sample frequencies and encoding method used
* in the device's audio streams. See the USB Audio specification for more details. * in the device's audio streams. See the USB Audio specification for more details.
* *
* \note This descriptor <b>must</b> be followed by one or more \ref USB_Audio_SampleFreq_t elements containing * \attention This descriptor <b>must</b> be followed by one or more \ref USB_Audio_SampleFreq_t elements containing
* the continuous or discrete sample frequencies. * the continuous or discrete sample frequencies.
* *
* \see \ref USB_Audio_StdDescriptor_Format_t for the version of this type with standard element names. * \see \ref USB_Audio_StdDescriptor_Format_t for the version of this type with standard element names.
@ -630,7 +630,7 @@
* about the number of channels, the sample resolution, acceptable sample frequencies and encoding method used * about the number of channels, the sample resolution, acceptable sample frequencies and encoding method used
* in the device's audio streams. See the USB Audio specification for more details. * in the device's audio streams. See the USB Audio specification for more details.
* *
* \note This descriptor <b>must</b> be followed by one or more 24-bit integer elements containing the continuous * \attention This descriptor <b>must</b> be followed by one or more 24-bit integer elements containing the continuous
* or discrete sample frequencies. * or discrete sample frequencies.
* *
* \see \ref USB_Audio_Descriptor_Format_t for the version of this type with non-standard LUFA specific * \see \ref USB_Audio_Descriptor_Format_t for the version of this type with non-standard LUFA specific

15
LUFA/Drivers/USB/Class/Device/CDCClassDevice.h
Unescape View File

@ -53,16 +53,17 @@
* *
* One major issue with CDC-ACM is that it requires two Interface descriptors, * One major issue with CDC-ACM is that it requires two Interface descriptors,
* which will upset most hosts when part of a multi-function "Composite" USB * which will upset most hosts when part of a multi-function "Composite" USB
* device, as each interface will be loaded into a separate driver instance. To * device. This is because each interface will be loaded into a separate driver
* combat this, you should use the "Interface Association Descriptor" addendum to * instance, causing the two interfaces be become unlinked. To prevent this, you
* the USB standard which is available on most OSes when creating Composite devices. * should use the "Interface Association Descriptor" addendum to the USB 2.0 standard
* which is available on most OSes when creating Composite devices.
* *
* Another major oversight is that there is no mechanism for the host to notify the * Another major oversight is that there is no mechanism for the host to notify the
* device that there is a data sink on the host side ready to accept data. This * device that there is a data sink on the host side ready to accept data. This
* means that the device may try to send data while the host isn't listening, causing * means that the device may try to send data while the host isn't listening, causing
* lengthy blocking timeouts in the transmission routines. To combat this, it is * lengthy blocking timeouts in the transmission routines. It is thus highly recommended
* recommended that the virtual serial line DTR (Data Terminal Ready) be used where * that the virtual serial line DTR (Data Terminal Ready) signal be used where possible
* possible to determine if a host application is ready for data. * to determine if a host application is ready for data.
* *
* @{ * @{
*/ */
@ -299,7 +300,7 @@
* be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
* line buffering. * line buffering.
* *
* \note The created stream can be given as stdout if desired to direct the standard output from all <stdio.h> functions * \note The created stream can be given as \c stdout if desired to direct the standard output from all <stdio.h> functions
* to the given CDC interface. * to the given CDC interface.
* \n\n * \n\n
* *

2
LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h
Unescape View File

@ -263,7 +263,7 @@
* be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
* line buffering. * line buffering.
* *
* \note The created stream can be given as stdout if desired to direct the standard output from all \c <stdio.h> functions * \note The created stream can be given as \c stdout if desired to direct the standard output from all \c <stdio.h> functions
* to the given AOA interface. * to the given AOA interface.
* \n\n * \n\n
* *

2
LUFA/Drivers/USB/Class/Host/CDCClassHost.h
Unescape View File

@ -289,7 +289,7 @@
* be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
* line buffering. * line buffering.
* *
* \note The created stream can be given as stdout if desired to direct the standard output from all \c <stdio.h> functions * \note The created stream can be given as \c stdout if desired to direct the standard output from all \c <stdio.h> functions
* to the given CDC interface. * to the given CDC interface.
* \n\n * \n\n
* *

7
LUFA/Drivers/USB/Class/Host/HIDClassHost.h
Unescape View File

@ -148,7 +148,7 @@
* device. This should be called once after the stack has enumerated the attached device, while the host state * device. This should be called once after the stack has enumerated the attached device, while the host state
* machine is in the Addressed state. * machine is in the Addressed state.
* *
* \note Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call * \attention Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call
* to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function. * to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function.
* *
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
@ -167,7 +167,7 @@
* \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
* call will fail. * call will fail.
* *
* \note The destination buffer should be large enough to accommodate the largest report that the attached device * \attention The destination buffer should be large enough to accommodate the largest report that the attached device
* can generate. * can generate.
* *
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
@ -267,9 +267,8 @@
/** Switches the attached HID device's reporting protocol over to the standard Report protocol mode. This also retrieves /** Switches the attached HID device's reporting protocol over to the standard Report protocol mode. This also retrieves
* and parses the device's HID report descriptor, so that the size of each report can be determined in advance. * and parses the device's HID report descriptor, so that the size of each report can be determined in advance.
* *
* \note Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID * \attention Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID
* Report Parser this function references <b>must</b> be implemented in the user code. * Report Parser this function references <b>must</b> be implemented in the user code.
* \n\n
* *
* \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable. * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
* *

12
LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
Unescape View File

@ -89,7 +89,7 @@
* \n * \n
* *
* \note Restrictions apply on the number, size and type of endpoints which can be used * \note Restrictions apply on the number, size and type of endpoints which can be used
* when running in low speed mode - refer to the USB 2.0 specification. * when running in low speed mode - please refer to the USB 2.0 specification.
*/ */
#define USB_DEVICE_OPT_LOWSPEED (1 << 0) #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
#endif #endif
@ -138,14 +138,14 @@
* Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the
* host computer when the host has suspended all USB devices to enter a low power state. * host computer when the host has suspended all USB devices to enter a low power state.
* *
* \note This macro should only be used if the device has indicated to the host that it * \attention This function should only be used if the device has indicated to the host that it
* supports the Remote Wakeup feature in the device descriptors, and should only be * supports the Remote Wakeup feature in the device descriptors, and should only be
* issued if the host is currently allowing remote wakeup events from the device (i.e., * issued if the host is currently allowing remote wakeup events from the device (i.e.,
* the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP
* compile time option is used, this macro is unavailable. * compile time option is used, this function is unavailable.
* \n\n * \n\n
* *
* \note The USB clock must be running for this function to operate. If the stack is initialized with * \attention The USB clock must be running for this function to operate. If the stack is initialized with
* the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running
* before attempting to call this function. * before attempting to call this function.
* *
@ -170,7 +170,7 @@
* \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
* at the start of each USB frame when enumerated in device mode. * at the start of each USB frame when enumerated in device mode.
* *
* \note Not available when the \c NO_SOF_EVENTS compile time token is defined. * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
*/ */
static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
static inline void USB_Device_EnableSOFEvents(void) static inline void USB_Device_EnableSOFEvents(void)
@ -181,7 +181,7 @@
/** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
* \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode. * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
* *
* \note Not available when the \c NO_SOF_EVENTS compile time token is defined. * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
*/ */
static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
static inline void USB_Device_DisableSOFEvents(void) static inline void USB_Device_DisableSOFEvents(void)

18
LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
Unescape View File

@ -171,7 +171,7 @@
/** Retrieves the maximum bank size in bytes of a given endpoint. /** Retrieves the maximum bank size in bytes of a given endpoint.
* *
* \note This macro will only work correctly on endpoint indexes that are compile-time constants * \attention This macro will only work correctly on endpoint indexes that are compile-time constants
* defined by the preprocessor. * defined by the preprocessor.
* *
* \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1)
@ -180,7 +180,7 @@
/** Retrieves the total number of banks supported by the given endpoint. /** Retrieves the total number of banks supported by the given endpoint.
* *
* \note This macro will only work correctly on endpoint indexes that are compile-time constants * \attention This macro will only work correctly on endpoint indexes that are compile-time constants
* defined by the preprocessor. * defined by the preprocessor.
* *
* \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1)
@ -245,12 +245,11 @@
* More banks uses more USB DPRAM, but offers better performance. Isochronous type * More banks uses more USB DPRAM, but offers better performance. Isochronous type
* endpoints <b>must</b> have at least two banks. * endpoints <b>must</b> have at least two banks.
* *
* \note When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in
* ascending order, or bank corruption will occur. * ascending order, or bank corruption will occur.
* \n\n
* *
* \note Different endpoints may have different maximum packet sizes based on the endpoint's index - refer to * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - please
* the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint. * refer to the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint.
* \n\n * \n\n
* *
* \note The default control endpoint should not be manually configured by the user application, as * \note The default control endpoint should not be manually configured by the user application, as
@ -278,9 +277,6 @@
} }
/** Indicates the number of bytes currently stored in the current endpoint's selected bank. /** Indicates the number of bytes currently stored in the current endpoint's selected bank.
*
* \note The return width of this function may differ, depending on the maximum endpoint bank size
* of the selected AVR model.
* *
* \ingroup Group_EndpointRW_AVR8 * \ingroup Group_EndpointRW_AVR8
* *
@ -835,7 +831,7 @@
* \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token
* be used in the device descriptors to ensure this. * be used in the device descriptors to ensure this.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
*/ */
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
@ -848,6 +844,8 @@
/** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
* with respect to the data direction. This is a convenience function which can be used to * with respect to the data direction. This is a convenience function which can be used to
* simplify user control request handling. * simplify user control request handling.
*
* \note This routine should not be called on non CONTROL type endpoints.
*/ */
void Endpoint_ClearStatusStage(void); void Endpoint_ClearStatusStage(void);

6
LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
Unescape View File

@ -146,7 +146,7 @@
* \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, * \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
* at the start of each USB frame when a device is enumerated while in host mode. * at the start of each USB frame when a device is enumerated while in host mode.
* *
* \note Not available when the \c NO_SOF_EVENTS compile time token is defined. * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
*/ */
static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_EnableSOFEvents(void) static inline void USB_Host_EnableSOFEvents(void)
@ -157,7 +157,7 @@
/** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the /** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the
* \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode. * \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode.
* *
* \note Not available when the NO_SOF_EVENTS compile time token is defined. * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
*/ */
static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_DisableSOFEvents(void) static inline void USB_Host_DisableSOFEvents(void)
@ -203,7 +203,7 @@
* device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame * device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame
* messages to the device. * messages to the device.
* *
* \note While the USB bus is suspended, all USB interrupt sources are also disabled; this means that * \attention While the USB bus is suspended, all USB interrupt sources are also disabled; this means that
* some events (such as device disconnections) will not fire until the bus is resumed. * some events (such as device disconnections) will not fire until the bus is resumed.
*/ */
static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE; static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE;

8
LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
Unescape View File

@ -192,9 +192,6 @@
/* Inline Functions: */ /* Inline Functions: */
/** Indicates the number of bytes currently stored in the current pipes's selected bank. /** Indicates the number of bytes currently stored in the current pipes's selected bank.
*
* \note The return width of this function may differ, depending on the maximum pipe bank size
* of the selected AVR model.
* *
* \ingroup Group_PipeRW_AVR8 * \ingroup Group_PipeRW_AVR8
* *
@ -807,7 +804,7 @@
* descriptor once the USB interface is initialized into host mode and a device is attached * descriptor once the USB interface is initialized into host mode and a device is attached
* to the USB bus. * to the USB bus.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
*/ */
extern uint8_t USB_Host_ControlPipeSize; extern uint8_t USB_Host_ControlPipeSize;
@ -842,9 +839,8 @@
* uses more USB DPRAM, but offers better performance. Isochronous type pipes <b>must</b> * uses more USB DPRAM, but offers better performance. Isochronous type pipes <b>must</b>
* have at least two banks. * have at least two banks.
* *
* \note When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order, * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order,
* or bank corruption will occur. * or bank corruption will occur.
* \n\n
* *
* \note Certain microcontroller model's pipes may have different maximum packet sizes based on the pipe's * \note Certain microcontroller model's pipes may have different maximum packet sizes based on the pipe's
* index - refer to the chosen microcontroller's datasheet to determine the maximum bank size for each pipe. * index - refer to the chosen microcontroller's datasheet to determine the maximum bank size for each pipe.

7
LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
Unescape View File

@ -227,7 +227,7 @@
* function prototype. * function prototype.
* \n\n * \n\n
* *
* \note To reduce the FLASH requirements of the library if only fixed settings are are required, * \note To reduce the FLASH requirements of the library if only fixed settings are required,
* the options may be set statically in the same manner as the mode (see the Mode parameter of * the options may be set statically in the same manner as the mode (see the Mode parameter of
* this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token,
* defined to the appropriate options masks. When the options are statically set, this * defined to the appropriate options masks. When the options are statically set, this
@ -271,9 +271,8 @@
/** Indicates the mode that the USB interface is currently initialized to, a value from the /** Indicates the mode that the USB interface is currently initialized to, a value from the
* \ref USB_Modes_t enum. * \ref USB_Modes_t enum.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
* \n\n
* *
* \note When the controller is initialized into UID auto-detection mode, this variable will hold the * \note When the controller is initialized into UID auto-detection mode, this variable will hold the
* currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller
@ -293,7 +292,7 @@
/** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init()
* was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
*/ */
extern volatile uint8_t USB_Options; extern volatile uint8_t USB_Options;

5
LUFA/Drivers/USB/Core/DeviceStandardReq.h
Unescape View File

@ -86,7 +86,7 @@
* different configurations which the host can select between; this indicates the currently selected * different configurations which the host can select between; this indicates the currently selected
* value, or 0 if no configuration has been selected. * value, or 0 if no configuration has been selected.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
* *
* \ingroup Group_Device * \ingroup Group_Device
@ -97,9 +97,8 @@
/** Indicates if the host is currently allowing the device to issue remote wakeup events. If this /** Indicates if the host is currently allowing the device to issue remote wakeup events. If this
* flag is cleared, the device should not issue remote wakeup events to the host. * flag is cleared, the device should not issue remote wakeup events to the host.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
* \n\n
* *
* \note To reduce FLASH usage of the compiled applications where Remote Wakeup is not supported, * \note To reduce FLASH usage of the compiled applications where Remote Wakeup is not supported,
* this global and the underlying management code can be disabled by defining the * this global and the underlying management code can be disabled by defining the

12
LUFA/Drivers/USB/Core/Events.h
Unescape View File

@ -183,6 +183,9 @@
* This event is time-critical; exceeding OS-specific delays within this event handler (typically of around * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
* two seconds) will prevent the device from enumerating correctly. * two seconds) will prevent the device from enumerating correctly.
* *
* \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
* if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
*
* \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available. * \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
* this means that the current connection state is derived from the bus suspension and wake up events by default, * this means that the current connection state is derived from the bus suspension and wake up events by default,
* which is not always accurate (host may suspend the bus while still connected). If the actual connection state * which is not always accurate (host may suspend the bus while still connected). If the actual connection state
@ -191,9 +194,6 @@
* and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
* \n\n * \n\n
* *
* \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
* if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
*
* \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
*/ */
void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Connect(void);
@ -201,6 +201,9 @@
/** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is
* disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin. * disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin.
* *
* \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
* if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
*
* \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller. * \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
* this means that the current connection state is derived from the bus suspension and wake up events by default, * this means that the current connection state is derived from the bus suspension and wake up events by default,
* which is not always accurate (host may suspend the bus while still connected). If the actual connection state * which is not always accurate (host may suspend the bus while still connected). If the actual connection state
@ -209,9 +212,6 @@
* and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
* \n\n * \n\n
* *
* \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
* if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
*
* \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
*/ */
void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_Disconnect(void);

2
LUFA/Drivers/USB/Core/HostStandardReq.h
Unescape View File

@ -95,7 +95,7 @@
* *
* To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function. * To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
* *
* \ingroup Group_Host * \ingroup Group_Host

7
LUFA/Drivers/USB/Core/UC3/Device_UC3.h
Unescape View File

@ -73,7 +73,7 @@
* USB interface should be initialized in low speed (1.5Mb/s) mode. * USB interface should be initialized in low speed (1.5Mb/s) mode.
* *
* \note Restrictions apply on the number, size and type of endpoints which can be used * \note Restrictions apply on the number, size and type of endpoints which can be used
* when running in low speed mode - refer to the USB 2.0 specification. * when running in low speed mode - please refer to the USB 2.0 specification.
*/ */
#define USB_DEVICE_OPT_LOWSPEED (1 << 0) #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
@ -127,12 +127,11 @@
* Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the
* host computer when the host has suspended all USB devices to enter a low power state. * host computer when the host has suspended all USB devices to enter a low power state.
* *
* \note This macro should only be used if the device has indicated to the host that it * \note This function should only be used if the device has indicated to the host that it
* supports the Remote Wakeup feature in the device descriptors, and should only be * supports the Remote Wakeup feature in the device descriptors, and should only be
* issued if the host is currently allowing remote wakeup events from the device (i.e., * issued if the host is currently allowing remote wakeup events from the device (i.e.,
* the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP
* compile time option is used, this macro is unavailable. * compile time option is used, this function is unavailable.
* \n\n
* *
* \note The USB clock must be running for this function to operate. If the stack is initialized with * \note The USB clock must be running for this function to operate. If the stack is initialized with
* the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running

14
LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h
Unescape View File

@ -199,7 +199,7 @@
/** Retrieves the maximum bank size in bytes of a given endpoint. /** Retrieves the maximum bank size in bytes of a given endpoint.
* *
* \note This macro will only work correctly on endpoint indexes that are compile-time constants * \attention This macro will only work correctly on endpoint indexes that are compile-time constants
* defined by the preprocessor. * defined by the preprocessor.
* *
* \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1)
@ -208,7 +208,7 @@
/** Retrieves the total number of banks supported by the given endpoint. /** Retrieves the total number of banks supported by the given endpoint.
* *
* \note This macro will only work correctly on endpoint indexes that are compile-time constants * \attention This macro will only work correctly on endpoint indexes that are compile-time constants
* defined by the preprocessor. * defined by the preprocessor.
* *
* \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1)
@ -273,9 +273,8 @@
* More banks uses more USB DPRAM, but offers better performance. Isochronous type * More banks uses more USB DPRAM, but offers better performance. Isochronous type
* endpoints <b>must</b> have at least two banks. * endpoints <b>must</b> have at least two banks.
* *
* \note When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in
* ascending order, or bank corruption will occur. * ascending order, or bank corruption will occur.
* \n\n
* *
* \note Different endpoints may have different maximum packet sizes based on the endpoint's index - refer to * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - refer to
* the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint. * the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint.
@ -309,9 +308,6 @@
} }
/** Indicates the number of bytes currently stored in the current endpoint's selected bank. /** Indicates the number of bytes currently stored in the current endpoint's selected bank.
*
* \note The return width of this function may differ, depending on the maximum endpoint bank size
* of the selected AVR model.
* *
* \ingroup Group_EndpointRW_UC3 * \ingroup Group_EndpointRW_UC3
* *
@ -831,7 +827,7 @@
* \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token
* be used in the device descriptors to ensure this. * be used in the device descriptors to ensure this.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
*/ */
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
@ -844,6 +840,8 @@
/** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
* with respect to the data direction. This is a convenience function which can be used to * with respect to the data direction. This is a convenience function which can be used to
* simplify user control request handling. * simplify user control request handling.
*
* \note This routine should not be called on non CONTROL type endpoints.
*/ */
void Endpoint_ClearStatusStage(void); void Endpoint_ClearStatusStage(void);

4
LUFA/Drivers/USB/Core/UC3/Host_UC3.h
Unescape View File

@ -143,7 +143,7 @@
* \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, * \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
* at the start of each USB frame when a device is enumerated while in host mode. * at the start of each USB frame when a device is enumerated while in host mode.
* *
* \note Not available when the \c NO_SOF_EVENTS compile time token is defined. * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
*/ */
static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_EnableSOFEvents(void) static inline void USB_Host_EnableSOFEvents(void)
@ -154,7 +154,7 @@
/** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the /** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the
* \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode. * \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode.
* *
* \note Not available when the NO_SOF_EVENTS compile time token is defined. * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
*/ */
static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_DisableSOFEvents(void) static inline void USB_Host_DisableSOFEvents(void)

5
LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
Unescape View File

@ -213,9 +213,6 @@
/* Inline Functions: */ /* Inline Functions: */
/** Indicates the number of bytes currently stored in the current pipes's selected bank. /** Indicates the number of bytes currently stored in the current pipes's selected bank.
*
* \note The return width of this function may differ, depending on the maximum pipe bank size
* of the selected AVR model.
* *
* \ingroup Group_PipeRW_UC3 * \ingroup Group_PipeRW_UC3
* *
@ -818,7 +815,7 @@
* descriptor once the USB interface is initialized into host mode and a device is attached * descriptor once the USB interface is initialized into host mode and a device is attached
* to the USB bus. * to the USB bus.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
*/ */
extern uint8_t USB_Host_ControlPipeSize; extern uint8_t USB_Host_ControlPipeSize;

7
LUFA/Drivers/USB/Core/UC3/USBController_UC3.h
Unescape View File

@ -184,7 +184,7 @@
* function prototype. * function prototype.
* \n\n * \n\n
* *
* \note To reduce the FLASH requirements of the library if only fixed settings are are required, * \note To reduce the FLASH requirements of the library if only fixed settings are required,
* the options may be set statically in the same manner as the mode (see the Mode parameter of * the options may be set statically in the same manner as the mode (see the Mode parameter of
* this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token,
* defined to the appropriate options masks. When the options are statically set, this * defined to the appropriate options masks. When the options are statically set, this
@ -224,9 +224,8 @@
/** Indicates the mode that the USB interface is currently initialized to, a value from the /** Indicates the mode that the USB interface is currently initialized to, a value from the
* \ref USB_Modes_t enum. * \ref USB_Modes_t enum.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
* \n\n
* *
* \note When the controller is initialized into UID auto-detection mode, this variable will hold the * \note When the controller is initialized into UID auto-detection mode, this variable will hold the
* currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller
@ -246,7 +245,7 @@
/** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init()
* was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
*/ */
extern volatile uint8_t USB_Options; extern volatile uint8_t USB_Options;

8
LUFA/Drivers/USB/Core/USBTask.h
Unescape View File

@ -73,7 +73,7 @@
* or device (i.e. if \ref USB_Init() has been run). If this is false, all other library globals related * or device (i.e. if \ref USB_Init() has been run). If this is false, all other library globals related
* to the USB driver are invalid. * to the USB driver are invalid.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
* *
* \ingroup Group_USBManagement * \ingroup Group_USBManagement
@ -133,12 +133,12 @@
* the compiler via the -D switch. When defined, the corresponding GPIOR register should not be used * the compiler via the -D switch. When defined, the corresponding GPIOR register should not be used
* in the user application except implicitly via the library APIs. * in the user application except implicitly via the library APIs.
* *
* \attention This variable should be treated as read-only in the user application, and never manually
* changed in value except in the circumstances outlined above.
*
* \note This global is only present if the user application can be a USB device. * \note This global is only present if the user application can be a USB device.
* \n\n * \n\n
* *
* \note This variable should be treated as read-only in the user application, and never manually
* changed in value except in the circumstances outlined above.
*
* \see \ref USB_Device_States_t for a list of possible device states. * \see \ref USB_Device_States_t for a list of possible device states.
* *
* \ingroup Group_Device * \ingroup Group_Device

8
LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h
Unescape View File

@ -133,11 +133,11 @@
* Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the
* host computer when the host has suspended all USB devices to enter a low power state. * host computer when the host has suspended all USB devices to enter a low power state.
* *
* \note This macro should only be used if the device has indicated to the host that it * \note This function should only be used if the device has indicated to the host that it
* supports the Remote Wakeup feature in the device descriptors, and should only be * supports the Remote Wakeup feature in the device descriptors, and should only be
* issued if the host is currently allowing remote wakeup events from the device (i.e., * issued if the host is currently allowing remote wakeup events from the device (i.e.,
* the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP
* compile time option is used, this macro is unavailable. * compile time option is used, this function is unavailable.
* \n\n * \n\n
* *
* \note The USB clock must be running for this function to operate. If the stack is initialized with * \note The USB clock must be running for this function to operate. If the stack is initialized with
@ -165,7 +165,7 @@
* \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
* at the start of each USB frame when enumerated in device mode. * at the start of each USB frame when enumerated in device mode.
* *
* \note Not available when the \c NO_SOF_EVENTS compile time token is defined. * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
*/ */
static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
static inline void USB_Device_EnableSOFEvents(void) static inline void USB_Device_EnableSOFEvents(void)
@ -176,7 +176,7 @@
/** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
* \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode. * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
* *
* \note Not available when the \c NO_SOF_EVENTS compile time token is defined. * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
*/ */
static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
static inline void USB_Device_DisableSOFEvents(void) static inline void USB_Device_DisableSOFEvents(void)

11
LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h
Unescape View File

@ -170,7 +170,7 @@
/** Retrieves the maximum bank size in bytes of a given endpoint. /** Retrieves the maximum bank size in bytes of a given endpoint.
* *
* \note This macro will only work correctly on endpoint indexes that are compile-time constants * \attention This macro will only work correctly on endpoint indexes that are compile-time constants
* defined by the preprocessor. * defined by the preprocessor.
* *
* \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1)
@ -179,7 +179,7 @@
/** Retrieves the total number of banks supported by the given endpoint. /** Retrieves the total number of banks supported by the given endpoint.
* *
* \note This macro will only work correctly on endpoint indexes that are compile-time constants * \attention This macro will only work correctly on endpoint indexes that are compile-time constants
* defined by the preprocessor. * defined by the preprocessor.
* *
* \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1)
@ -315,9 +315,6 @@
} }
/** Indicates the number of bytes currently stored in the current endpoint's selected bank. /** Indicates the number of bytes currently stored in the current endpoint's selected bank.
*
* \note The return width of this function may differ, depending on the maximum endpoint bank size
* of the selected AVR model.
* *
* \ingroup Group_EndpointRW_XMEGA * \ingroup Group_EndpointRW_XMEGA
* *
@ -793,7 +790,7 @@
* \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token
* be used in the device descriptors to ensure this. * be used in the device descriptors to ensure this.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
*/ */
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
@ -806,6 +803,8 @@
/** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
* with respect to the data direction. This is a convenience function which can be used to * with respect to the data direction. This is a convenience function which can be used to
* simplify user control request handling. * simplify user control request handling.
*
* \note This routine should not be called on non CONTROL type endpoints.
*/ */
void Endpoint_ClearStatusStage(void); void Endpoint_ClearStatusStage(void);

7
LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h
Unescape View File

@ -192,7 +192,7 @@
* function prototype. * function prototype.
* \n\n * \n\n
* *
* \note To reduce the FLASH requirements of the library if only fixed settings are are required, * \note To reduce the FLASH requirements of the library if only fixed settings are required,
* the options may be set statically in the same manner as the mode (see the Mode parameter of * the options may be set statically in the same manner as the mode (see the Mode parameter of
* this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token,
* defined to the appropriate options masks. When the options are statically set, this * defined to the appropriate options masks. When the options are statically set, this
@ -236,9 +236,8 @@
/** Indicates the mode that the USB interface is currently initialized to, a value from the /** Indicates the mode that the USB interface is currently initialized to, a value from the
* \ref USB_Modes_t enum. * \ref USB_Modes_t enum.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
* \n\n
* *
* \note When the controller is initialized into UID auto-detection mode, this variable will hold the * \note When the controller is initialized into UID auto-detection mode, this variable will hold the
* currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller
@ -256,7 +255,7 @@
/** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init()
* was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module.
* *
* \note This variable should be treated as read-only in the user application, and never manually * \attention This variable should be treated as read-only in the user application, and never manually
* changed in value. * changed in value.
*/ */
extern volatile uint8_t USB_Options; extern volatile uint8_t USB_Options;

6
LUFA/Drivers/USB/USB.h
Unescape View File

@ -158,9 +158,6 @@
* before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters * before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters
* for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters. * for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters.
* *
* \note The \c State section of the \c USB_ClassInfo_* structures are designed to be controlled by the Class Drivers only
* for maintaining the Class Driver instance's state, and should not normally be altered by the user application.
*
* The following is an example of a properly initialized instance of the Audio Class Driver structure: * The following is an example of a properly initialized instance of the Audio Class Driver structure:
* *
* \code * \code
@ -258,9 +255,6 @@
* before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters * before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters
* for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters. * for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters.
* *
* \note The \c State section of the \c USB_ClassInfo_* structures are designed to be controlled by the Class Drivers only
* for maintaining the Class Driver instance's state, and should not normally be altered by the user application.
*
* The following is an example of a properly initialized instance of the MIDI Host Class Driver structure: * The following is an example of a properly initialized instance of the MIDI Host Class Driver structure:
* *
* \code * \code

2
LUFA/Platform/UC3/ClockManagement.h
Unescape View File

@ -162,7 +162,7 @@
/** Starts the given PLL of the UC3 microcontroller, with the given options. This routine blocks until the PLL is ready for use. /** Starts the given PLL of the UC3 microcontroller, with the given options. This routine blocks until the PLL is ready for use.
* *
* \note The output frequency must be equal to or greater than the source frequency. * \attention The output frequency must be equal to or greater than the source frequency.
* *
* \param[in] Channel Index of the PLL to start. * \param[in] Channel Index of the PLL to start.
* \param[in] Source Clock source for the PLL, a value from \ref UC3_System_ClockSource_t. * \param[in] Source Clock source for the PLL, a value from \ref UC3_System_ClockSource_t.

2
LUFA/Platform/XMEGA/ClockManagement.h
Unescape View File

@ -200,7 +200,7 @@
/** Starts the PLL of the XMEGA microcontroller, with the given options. This routine blocks until the PLL is ready for use. /** Starts the PLL of the XMEGA microcontroller, with the given options. This routine blocks until the PLL is ready for use.
* *
* \note The output frequency must be equal to or greater than the source frequency. * \attention The output frequency must be equal to or greater than the source frequency.
* *
* \param[in] Source Clock source for the PLL, a value from \ref XMEGA_System_ClockSource_t. * \param[in] Source Clock source for the PLL, a value from \ref XMEGA_System_ClockSource_t.
* \param[in] SourceFreq Frequency of the PLL's clock source, in Hz. * \param[in] SourceFreq Frequency of the PLL's clock source, in Hz.

2
LUFA/Scheduler/Scheduler.h
Unescape View File

@ -199,7 +199,7 @@
/** Contains the total number of tasks in the task list, irrespective of if the task's status is set to /** Contains the total number of tasks in the task list, irrespective of if the task's status is set to
* \ref TASK_RUN or \ref TASK_STOP. * \ref TASK_RUN or \ref TASK_STOP.
* *
* \note This value should be treated as read-only, and never altered in user-code. * \warning This value should be treated as read-only, and never altered in user-application code.
*/ */
extern volatile uint_least8_t Scheduler_TotalTasks; extern volatile uint_least8_t Scheduler_TotalTasks;

Write Preview
Loading…
Cancel
Save