Merge pull request #3 from qmk/master

Fork syncing

build_keyboard.mk

@@ -204,7 +204,11 @@ else
 endif
 
 # User space stuff
-USER_PATH := users/$(KEYMAP)
+ifeq ("$(USER_NAME)","")
+    USER_NAME := $(KEYMAP)
+endif
+USER_PATH := users/$(USER_NAME)
+
 -include $(USER_PATH)/rules.mk
 ifneq ("$(wildcard users/$(KEYMAP)/config.h)","")
     CONFIG_H += users/$(KEYMAP)/config.h

common_features.mk

@@ -34,6 +34,7 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes)
     OPT_DEFS += -DAUDIO_ENABLE
     MUSIC_ENABLE := 1
     SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c
     ifeq ($(PLATFORM),AVR)
         SRC += $(QUANTUM_DIR)/audio/audio.c
     else

docs/feature_advanced_keycodes.md

@@ -19,14 +19,15 @@ Currently, the keycodes able to used with these functions are limited to the [Ba
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways.
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers)
 
-* `MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer.
+* `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
-* `LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped.
+* `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
-* `TG(layer)` - toggles a layer on or off.
+* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
-* `TO(layer)` - Goes to a layer. This code is special, because it lets you go either up or down the stack -- just goes directly to the layer you want. So while other codes only let you go _up_ the stack (from layer 0 to layer 3, for example), `TO(2)` is going to get you to layer 2, no matter where you activate it from -- even if you're currently on layer 5. This gets activated on keydown (as soon as the key is pressed).
+* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped.
-* `TT(layer)` - Layer Tap-Toggle. If you hold the key down, the layer becomes active, and then deactivates when you let go. And if you repeatedly tap it, the layer simply becomes active (toggles on). It needs 5 taps by default, but you can set it by defining `TAPPING_TOGGLE`, for example, `#define TAPPING_TOGGLE 2` for just two taps.
+* `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
-* `LM(layer, mod)` - Momentary switch to *layer* (like MO), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed).
+* `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps.
 
 # Working with Layers
 
@@ -36,9 +37,9 @@ Care must be taken when switching layers, it's possible to lock yourself into a
 
 If you are just getting started with QMK you will want to keep everything simple. Follow these guidelines when setting up your layers:
 
-* Setup layer 0 as your "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.)
+* Setup layer 0 as your default, "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.). It's important to set this as the lowest layer since it will typically have most or all of the keyboard's keys defined, so would block other layers from having any effect if it were above them (i.e., had a higher layer number). 
 * Arrange your layers in a "tree" layout, with layer 0 as the root. Do not try to enter the same layer from more than one other layer.
-* Never try to stack a higher numbered layer on top of a lower numbered layer. Doing so is tricky and error prone.
+* In a layer's keymap, only reference higher-numbered layers. Because layers are processed from the highest-numbered (topmost) active layer down, modifying the state of lower layers can be tricky and error-prone.
 
 ### Intermediate Users
 

docs/feature_tap_dance.md

@@ -22,7 +22,7 @@ This array specifies what actions shall be taken when a tap-dance key is in acti
 * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 
-The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
+The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
 
 And that's the bulk of it!
 

docs/feature_userspace.md

@@ -25,19 +25,19 @@ For example,
 
 Will include the `/users/jack/` folder in the path, along with `/users/jack/rules.mk`.
 
-Additionally, `config.h` here will be processed like the same file in your keymap folder.  This is handled separately from the `<name>.h` file.  
+Additionally, `config.h` here will be processed like the same file in your keymap folder.  This is handled separately from the `<name>.h` file.
 
-The reason for this, is that `<name>.h` won't be added in time to add settings (such as `#define TAPPING_TERM 100`), and including the `<name.h>` file in any `config.h` files will result in compile issues. 
+The reason for this, is that `<name>.h` won't be added in time to add settings (such as `#define TAPPING_TERM 100`), and including the `<name.h>` file in any `config.h` files will result in compile issues.
+
+So you should use the `config.h` for QMK settings, and the `<name>.h` file for user or keymap specific settings.
 
-So you should use the `config.h` for QMK settings, and the `<name>.h` file for user or keymap specific settings. 
- 
 ## Readme
 
 Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
 
 ## `Config.h`
 
-If you do add a `config,h` file, you want to make sure that it only gets processed once.  So you may want to start off with something like this: 
+If you do add a `config,h` file, you want to make sure that it only gets processed once.  So you may want to start off with something like this:
 
 ```c
 #ifndef USERSPACE_CONFIG_H
@@ -48,7 +48,7 @@ If you do add a `config,h` file, you want to make sure that it only gets process
 #endif // !USERSPACE_CONFIG_H
 ```
 
-You can use any option hre that you could use in your keymap's `config.h` file. You can find a list of vales [here](config_options.md). 
+You can use any option hre that you could use in your keymap's `config.h` file. You can find a list of vales [here](config_options.md).
 
 ## Example
 
@@ -115,3 +115,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 This will add a new `KC_MAKE`  keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap">`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
 
 Additionally, this should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely (and will dump the HEX in the ".build" folder instead).
+
+## Override default userspace
+
+By default the userspace used will be the same as the keymap name. In some situations this isn't desirable. For instance, if you use the [layout](feature_layouts.md) feature you can't use the same name for different keymaps (e.g. ANSI and ISO). You can name your layouts `mylayout-ansi` and `mylayout-iso` and add the following line to your layout's `rules.mk`:
+
+```
+USER_NAME := mylayout
+```

keyboards/1up60rgb/1up60rgb.h

@@ -3,7 +3,7 @@
 
 #include "quantum.h"
 
-#define KEYMAP( \
+#define LAYOUT_all( \
 	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
 	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
 	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
@@ -17,4 +17,50 @@
 	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
 }
 
-#endif
+
+/* ANSI variant. No extra keys for ISO */
+#define LAYOUT_60_ansi( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K313, \
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+) LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
+	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, KC_NO,\
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+)
+
+/* ISO variant. Remove useless ANSI keys */
+#define LAYOUT_60_iso( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K313, \
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+) LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K214, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, KC_NO,\
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+)
+
+/* HHKB Variant */
+#define LAYOUT_60_ansi_split_bs_rshift( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+) LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,\
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
+	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+)
+
+#endif

keyboards/1up60rgb/info.json

@@ -5,8 +5,20 @@
   "width": 15,
   "height": 5,
   "layouts": {
-      "KEYMAP": {
+    "LAYOUT_all": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
-      }
+    },
+
+    "LAYOUT_60_ansi": {
+      "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
+    },
+
+    "LAYOUT_60_iso": {
+      "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+
+    "LAYOUT_60_ansi_split_bs_rshift": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+    }
   }
 }

keyboards/1up60rgb/keymaps/default/keymap.c

@@ -2,14 +2,14 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
 		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
 		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/1up60rgb/keymaps/iso/keymap.c

@@ -2,14 +2,14 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
 		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
 		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/1up60rgb/keymaps/tsangan/keymap.c

@@ -2,14 +2,14 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	KEYMAP(
+	LAYOUT_all(
 		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
 		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
 		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL),
 
-	KEYMAP(
+	LAYOUT_all(
 		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
 		KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,

keyboards/1up60rgb/rules.mk

@@ -53,4 +53,6 @@ SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes
+RGBLIGHT_ENABLE ?= yes
+
+LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift

keyboards/alf_x2/alf_x2.c

@@ -0,0 +1 @@
+#include "alf_x2.h"

keyboards/alf_x2/alf_x2.h

@@ -0,0 +1,92 @@
+#ifndef ALF_X2_H
+#define ALF_X2_H
+
+#include "quantum.h"
+
+// K404 and K408 are the microswitches at the top of the PCB
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+}
+
+#define LAYOUT_std_ansi( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,  \
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411,        K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO,  K313,  KC_NO }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO,  K413,  K414 }  \
+}
+
+#define LAYOUT_std_splits( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411,       K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
+}
+
+#define LAYOUT_hhkb( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+	      K401,       K403, K404,       K406,       K408,       K410, K411        \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ KC_NO, K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO, KC_NO, KC_NO }  \
+}
+
+#define LAYOUT_2u_split_arrows( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314,\
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012, K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112, K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212, K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312, K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412, K413,  K414 }  \
+}
+
+#define LAYOUT_split_arrows( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_N), K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+}
+
+#endif

keyboards/alf_x2/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ALF
+#define PRODUCT         X2
+#define DESCRIPTION     ALF X2 60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/alf_x2/info.json

@@ -0,0 +1,32 @@
+{
+    "keyboard_name": "ALF X2", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15.0, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3}, {"label":"Shift", "x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4, "w":1.3}, {"x":6.0, "y":4, "w":2}, {"x":8.5, "y":4, "w":1.3}, {"label":"Alt", "x":10.0, "y":4}, {"label":"Alt", "x":11.0, "y":4}, {"label":"Win", "x":12.0, "y":4}, {"label":"Menu", "x":13.0, "y":4}, {"label":"Ctrl", "x":14.0, "y":4}]
+        },
+
+        "LAYOUT_std_ansi": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4}, {"x":5.5, "y":4, "w":2.75}, {"x":8.5, "y":4}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_hhkb": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Win", "x":1.75, "y":4, "w":1.25}, {"label":"Alt", "x":3, "y":4, "w":1.25}, {"x":4.75, "y":4}, {"x":6, "y":4, "w":2.75}, {"x":9, "y":4}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_std_splits": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4}, {"x":5.5, "y":4, "w":2.75}, {"x":8.5, "y":4}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_2u_split_arrows": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"Shift", "x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4}, {"x":5.5, "y":4, "w":2.75}, {"x":8.5, "y":4}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+        },
+
+        "LAYOUT_split_arrows": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":4.25, "y":4}, {"x":5.5, "y":4, "w":2.75}, {"x":8.5, "y":4}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+        }
+    }
+}

keyboards/alf_x2/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  LAYOUT(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, 
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_NO, 
+    KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_SPC, KC_VOLD, KC_RALT, MO(1), KC_NO, KC_APP, KC_RCTL),
+
+  LAYOUT(
+    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, 
+    KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_TRNS, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+  } else {
+    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+  }
+}

keyboards/alf_x2/keymaps/hhkb_60/keymap.c

@@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  LAYOUT(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, 
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, 
+    KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, MO(1), 
+    KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_SPC, KC_VOLD, KC_RALT, KC_RGUI, KC_NO, KC_APP, KC_RCTL),
+
+  LAYOUT(
+    KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, 
+    KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, 
+    KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_TRNS, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+  } else {
+    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+  }
+}

keyboards/alf_x2/readme.md

@@ -0,0 +1,19 @@
+# ALF X2
+
+![alf_x2](https://cdn.shopify.com/s/files/1/1674/0405/products/1_088c2862-1f68-4fdd-a346-965208c3a3de_1024x1024.png?v=1511296076)
+
+A customizable 60% keyboard.
+
+In QMK Configurator, the two keys to the left and right of the spacebar are the microswitches at the top of the PCB.
+
+In the LAYOUT macros, K404 and K408 are the microswitches at the top of the PCB.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: ALF X2 60%  
+Hardware Availability: [zfrontier](https://en.zfrontier.com/products/group-buy-alf-x2-60)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alf_x2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/alf_x2/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/alpha/readme.md

@@ -1,14 +1,17 @@
 # Alpha
 
-![Alpha](https://imgur.com/a/TouJ5rH)
+![Alpha](https://i.imgur.com/J6EJ30N.jpg)
 
 A 28-key, semi-ortho keyboard designed by PyroL!
-Keyboard Maintainer: [PyroL](https://www.github.com/PyrooL) 
+
-Hardware Supported: Alpha PCB, Pro Micro 
+Keyboard Maintainer: [PyroL](https://www.github.com/PyrooL)
+
+Hardware Supported: Alpha PCB, Pro Micro
+
 Hardware Availability: on a group-buy basis for now. Pro Micros can be found on Ali or from the official Sparkfun website.
 
 Make example for Alpha (after setting up your build environment):
 
     make alpha:default
 
-    See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information.
+See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information.

keyboards/bananasplit/keymaps/talljoe/config.h

@@ -0,0 +1,22 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+#define SPACE_COUNT 3
+
+#define LAYOUT(                                                                     \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
+    K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
+) {                                                                                 \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D },       \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D },       \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D },       \
+    { K30, KC_NO,    K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D },  \
+    { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, KC_NO, K4B, K4C, KC_NO }\
+}
+
+#endif

keyboards/bananasplit/keymaps/talljoe/keymap.c

@@ -0,0 +1 @@
+// This space intentionally left blank

keyboards/bfo9000/bfo9000.c

@@ -0,0 +1 @@
+#include "bfo9000.h"

keyboards/bfo9000/bfo9000.h

@@ -0,0 +1,37 @@
+#ifndef BFO9000_H
+#define BFO9000_H
+
+#include "quantum.h"
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+    #include <avr/io.h>
+    #include <avr/interrupt.h>
+#endif
+#endif
+
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05, L06, L07, L08, R00, R01, R02, R03, R04, R05, R06, R07, R08, \
+    L10, L11, L12, L13, L14, L15, L16, L17, L18, R10, R11, R12, R13, R14, R15, R16, R17, R18, \
+    L20, L21, L22, L23, L24, L25, L26, L27, L28, R20, R21, R22, R23, R24, R25, R26, R27, R28, \
+    L30, L31, L32, L33, L34, L35, L36, L37, L38, R30, R31, R32, R33, R34, R35, R36, R37, R38, \
+    L40, L41, L42, L43, L44, L45, L46, L47, L48, R40, R41, R42, R43, R44, R45, R46, R47, R48, \
+    L50, L51, L52, L53, L54, L55, L56, L57, L58, R50, R51, R52, R53, R54, R55, R56, R57, R58 \
+    ) \
+    { \
+        { L00, L01, L02, L03, L04, L05, L06, L07, L08 }, \
+        { L10, L11, L12, L13, L14, L15, L16, L17, L18 }, \
+        { L20, L21, L22, L23, L24, L25, L26, L27, L28 }, \
+        { L30, L31, L32, L33, L34, L35, L36, L37, L38 }, \
+        { L40, L41, L42, L43, L44, L45, L46, L47, L48 }, \
+        { L50, L51, L52, L53, L54, L55, L56, L57, L58 }, \
+        { R00, R01, R02, R03, R04, R05, R06, R07, R08 }, \
+        { R10, R11, R12, R13, R14, R15, R16, R17, R18 }, \
+        { R20, R21, R22, R23, R24, R25, R26, R27, R28 }, \
+        { R30, R31, R32, R33, R34, R35, R36, R37, R38 }, \
+        { R40, R41, R42, R43, R44, R45, R46, R47, R48 }, \
+        { R50, R51, R52, R53, R54, R55, R56, R57, R58 } \
+    }
+
+#endif

keyboards/bfo9000/config.h

@@ -0,0 +1,78 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x1169
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Keebio
+#define PRODUCT         BFO-9000
+#define DESCRIPTION     Really big split ortholinear keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 9
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D3, D2, D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { B5, B6, B2, B3, B1, F7, F6, F5, F4 }
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B4
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 20    // Number of LEDs
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif

keyboards/bfo9000/i2c.c

@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif

keyboards/bfo9000/i2c.h

@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/bfo9000/keymaps/default/config.h

@@ -1,5 +1,8 @@
 /*
-Copyright 2017 Danny Nguyen <danny@keeb.io>
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -26,20 +29,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define USE_I2C
 
 /* Select hand configuration */
-#define PERMISSIVE_HOLD
+
-#define PREVENT_STUCK_MODIFIERS
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
-/*
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-*/
-#define TAPPING_TERM 200
-#include "../../config.h"
 
 #endif

keyboards/bfo9000/keymaps/default/keymap.c

@@ -0,0 +1,19 @@
+#include QMK_KEYBOARD_H
+
+#define _BASE 0
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_BASE] = LAYOUT( \
+    KC_ESC,  KC_VOLU, KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,         KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
+    KC_HOME, KC_VOLD, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,          KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+    KC_END,  KC_TAB,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,          KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+    KC_PGUP, KC_CAPS, KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,          KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT, \
+    KC_PGDN, KC_UP,   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,          KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   XXXXXXX, \
+    KC_LEFT, KC_DOWN, KC_RGHT, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC,  KC_SPC,  KC_ENT,        KC_BSPC, KC_SPC,  KC_SPC,  KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
+)
+};

keyboards/bfo9000/matrix.c

@@ -0,0 +1,342 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#ifdef USE_I2C
+// provides memcpy for copying TWI slave buffer
+// #include <string.h>
+#endif
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+    // Right hand is stored after the left in the matrix so, we need to offset it
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i+offset] != cols) {
+            matrix_debouncing[i+offset] = cols;
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+        }
+    }
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        /*
+        // read from TWI byte-by-byte into matrix_row_t memory space
+        size_t i;
+        for (i = 0; i < SLAVE_BUFFER_SIZE-1; ++i) {
+            *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_ACK);
+        }
+        // last byte to be read / end of chunk
+        *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_NACK);
+        */
+
+        // kludge for column #9: unpack bits for keys (2,9) and (3,9) from (1,7) and (1,8)
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+0] = i2c_master_read(I2C_ACK);
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+1] = (matrix_row_t)i2c_master_read(I2C_ACK)\
+                                | (matrix[slaveOffset+0]&0x40U)<<2;
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+2] = (matrix_row_t)i2c_master_read(I2C_NACK)\
+                                | (matrix[slaveOffset+0]&0x80U)<<1;
+        // clear highest two bits on row 1, where the col9 bits were transported
+        matrix[slaveOffset+0] &= 0x3F;
+
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnected, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    int ret = _matrix_scan();
+
+
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+    // SLAVE_BUFFER_SIZE is from i2c.h
+    // (MATRIX_ROWS/2*sizeof(matrix_row_t))
+    // memcpy((void*)i2c_slave_buffer, (const void*)&matrix[offset], (ROWS_PER_HAND*sizeof(matrix_row_t)));
+
+    // kludge for column #9: put bits for keys (2,9) and (3,9) into (1,7) and (1,8)
+    i2c_slave_buffer[0] = (uint8_t)(matrix[offset+0])\
+                          | (matrix[offset+1]&0x100U)>>2\
+                          | (matrix[offset+2]&0x100U)>>1;
+    i2c_slave_buffer[1] = (uint8_t)(matrix[offset+1]);
+    i2c_slave_buffer[2] = (uint8_t)(matrix[offset+2]);
+    // note: looks like a possible operator-precedence bug here, in last version?
+    /*
+    i2c_slave_buffer[1] = (uint8_t)matrix[offset+0];
+    i2c_slave_buffer[2] = (uint8_t)(matrix[offset+1]>>8);
+    i2c_slave_buffer[3] = (uint8_t)(matrix[offset+1]>>8);
+    i2c_slave_buffer[4] = (uint8_t)(matrix[offset+2]>>8);
+    i2c_slave_buffer[5] = (uint8_t)matrix[offset+2];
+    */
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void  init_cols(void)
+{
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    }
+}
+
+static matrix_row_t read_cols(void)
+{
+    matrix_row_t result = 0;
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    }
+    return result;
+}
+
+static void unselect_rows(void)
+{
+    for(int x = 0; x < ROWS_PER_HAND; x++) {
+        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    }
+}
+
+static void select_row(uint8_t row)
+{
+    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}

keyboards/bfo9000/readme.md

@@ -0,0 +1,18 @@
+BFO-9000
+========
+
+A split full-size ortholinear keyboard made and sold by Keebio. Each half is a 6x9 arrangement, with breakable pieces to allow the number of rows to be customized between 4 to 6, and the number of columns to be between 7 to 9. [More info at Keebio](https://keeb.io).
+
+Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)  
+Hardware Supported: Pro Micro  
+Hardware Availability: [Keebio](https://keeb.io)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bfo9000:default
+
+Example of flashing this keyboard:
+
+    make bfo9000:default:avrdude
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/bfo9000/rules.mk

@@ -0,0 +1,70 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes

keyboards/bfo9000/serial.c

@@ -0,0 +1,230 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifdef USE_SERIAL
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+matrix_row_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+matrix_row_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define ROW_MASK (((matrix_row_t)0-1)>>(8*sizeof(matrix_row_t)-MATRIX_COLS))
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+matrix_row_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+matrix_row_t serial_read_byte(void) {
+  matrix_row_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < MATRIX_COLS; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(matrix_row_t data) {
+  matrix_row_t b = MATRIX_COLS;
+  serial_output();
+  while( b-- ) {
+    if(data & (1UL << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  matrix_row_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += ROW_MASK & serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  matrix_row_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += ROW_MASK & serial_master_buffer[i];
+  }
+  matrix_row_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  matrix_row_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += ROW_MASK & serial_slave_buffer[i];
+  }
+  matrix_row_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  matrix_row_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += ROW_MASK & serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif

keyboards/bfo9000/serial.h

@@ -0,0 +1,27 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include "matrix.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile matrix_row_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile matrix_row_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif

keyboards/bfo9000/split_util.c

@@ -0,0 +1,86 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init();
+#endif
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+  timer_init();
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}

keyboards/bfo9000/split_util.h

@@ -0,0 +1,20 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif

keyboards/chibios_test/teensy_lc_onekey/instructions.md

@@ -15,7 +15,7 @@ Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories:
 
 ### If you’re using git
 
-Run `git submodule sync —recursive && git submodule update --init —recursive`. This will install ChibiOS and ChibiOS-Contrib in the `/lib/` directory.
+Run `git submodule sync --recursive && git submodule update --init --recursive`. This will install ChibiOS and ChibiOS-Contrib in the `/lib/` directory.
 
 ### If you’re not using Git
 

keyboards/clueboard/2x1800/config.h

@@ -69,6 +69,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+#define RGB_DI_PIN C6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
  * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
  */

keyboards/clueboard/2x1800/keymaps/default_7u/keymap.c

@@ -17,12 +17,33 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_7U_SPACE(
-      KC_HOME, KC_END,  KC_PGUP, KC_PGDN,       KC_ESC,    KC_F1,   KC_F2,   KC_F3,   KC_F4,     KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,   KC_F11,  KC_F12,        KC_PSCR, KC_SLCK, KC_PAUS, KC_INS,  \
+      KC_HOME, KC_END,  KC_PGUP, KC_PGDN,       KC_ESC,    KC_F1,   KC_F2,   KC_F3,   KC_F4,     KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,   KC_F11,  KC_F12,        KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL,  \
                                                                                                                                                                                                                       \
       KC_PMNS, KC_NLCK, KC_PSLS, KC_PAST,      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
       KC_PPLS, KC_P7,   KC_P8,   KC_P9,        KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC, KC_BSLS,       KC_P7, KC_P8, KC_P9, KC_PSLS,       \
                KC_P4,   KC_P5,   KC_P6,        KC_CAPS,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,    KC_QUOT, KC_ENT,         KC_P4, KC_P5, KC_P6,                \
-      KC_PENT, KC_P1,   KC_P2,   KC_P3,     KC_UP,  KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_SLSH, KC_COMM, KC_DOT,   KC_RSFT,      KC_UP,      KC_P1, KC_P2, KC_P3, KC_PENT,       \
+      KC_PENT, KC_P1,   KC_P2,   KC_P3,     KC_UP,  KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM, KC_DOT, KC_SLSH,    KC_RSFT,     KC_UP,      KC_P1, KC_P2, KC_P3, KC_PENT,       \
                KC_P0,   KC_PDOT,  KC_LEFT, KC_DOWN, KC_RGHT,  KC_LCTL, KC_LALT,                  KC_SPC,                                  KC_LGUI, KC_APP,   KC_LEFT, KC_DOWN, KC_RGHT,  KC_P0, KC_PDOT               \
 )
 };
+
+
+#ifdef AUDIO_ENABLE
+  float song_one_up[][2] = SONG(ONE_UP_SOUND);
+#endif
+
+volatile uint8_t runonce = true;
+static uint16_t my_timer;
+
+void matrix_init_user(void) {
+  my_timer = timer_read();
+}
+
+void matrix_scan_user(void) {
+  if (runonce && timer_elapsed(my_timer) > 500) {
+    runonce = false;
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(song_one_up);
+#endif
+  }
+}

keyboards/clueboard/2x1800/rules.mk

@@ -59,5 +59,6 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes            # USB Nkey Rollover
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
-AUDIO_ENABLE = no           # Audio output on port C6
+RGBLIGHT_ENABLE = no        # RGB on port C6
+AUDIO_ENABLE = no           # Audio output on port C4 and B7
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/cu75/cu75.h

@@ -110,8 +110,8 @@ void click(uint16_t freq, uint16_t duration);
 #define LAYOUT_iso( \
     k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, \
     k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      k1E, k1G, \
-    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,    k3D, k2F, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,    k2E, k2F, \
-    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,        k2E, k3F, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,        k3D, k3F, \
     k41, k42, k43, k44,  k45, k46, k47, k48, k49, k4A, k4B, k4C,      k4D, k4E, k4F, \
     k51, k52, k53,        k54,      k57,       k59,        k5A, k5B, k5C, k5D, k5E, k5F \
 ) { \

keyboards/dz60/keymaps/256k_HHKB/README.md

@@ -3,6 +3,21 @@
 
 this is my personal layer that i use on my Tina-C HHKB layout board with a DZ60 PCB.
 ---
+UPDATE (4-20-2018):
+===
+after a week of using this layout i reazlied that having the ALT button on the right side and the ALTFN layer trigger on the left isn't ideal...i still wanted to change the default HHKB style CROSS arrow cluster into a reversed T cluster since im more used to that so i swapped the ALTFN layer to the right side and the normal ALT layer is back on the left side. so now i can use the arrow cluster (which i shifted one key over to the right) with 1 hand.
+
+it feels more nataural to me this way.
+
+also i decided to change the mouse scroll keys on the mouse layer to mouse movement keys... the scrolling wasn't working out as well as i'd hoped. again, this is merely an experimental layer just to play around with mouse control.
+
+
+
+
+---
+
+Walkthrough:
+---
 
 there is 1 base layer and 4 modifyer layers:
 
@@ -21,7 +36,7 @@ BASE:
  * |-----------------------------------------------------------------------------------------+
  * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  RShift   |  FN |
  * |-----------------------------------------------------------------------------------------+
- * |              Win  |      Alt  |            Space       |   Alt     |    LIGHTS          |
+ * |              Win  |      Alt  |            Space       |   ALTFN     |    LIGHTS        |
  * `-----------------------------------------------------------------------------------------'
  */
  ```
@@ -37,9 +52,9 @@ BASE:
  *  ,---------------------------------------------------------------------------------------------------------------------
  * |         | F1   | F2   | F3   | F4    | F5    | F6    | F7   | F8    | F9   | F10   | F11   | F12   | INSERT  |  _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  UP  |  MUTE  |  V_DEC   |  V_INC  | DEL  |
+ * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |    _   |  UP  |  V_DEC   |  V_INC  | DEL  |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | HOME | LEFT | DOWN | RIGHT  |   END    |    _          |
+ * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | HOME |   END    | LEFT | DOWN | RIGHT  |    _          |
  * |---------------------------------------------------------------------------------------------------------------------+
  * | Shift         |  _   |  _   |  _   |  _   |  _   |  _   |  _   |  PREV  |    NEXT  |  PLAY  |    _       |   _      |
  * |---------------------------------------------------------------------------------------------------------------------+
@@ -61,14 +76,14 @@ also another benefit is that a lot of mice do not have horizontal control button
 (This layer is still experimental so i might change it later or modify it but so far i enjoy it)
 
 ```
-/* MOUSEFN LAYER
+ /* MOUSEFN LAYER
  *
  *  ,---------------------------------------------------------------------------------------------------------------------
  * |        |  ACC_1  |  ACC_2  |  ACC_3  |  _    |  _    |  _    |  _   |  _    |  _   |  _   |  _   |  _   | _  |  _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  WHEEL_UP  |  _  |   _   |    _   |   _   |
+ * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  _  |  WHEEL_UP  |   _   |    _   |   _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | _ |  WH_LEFT |  WH_DOWN |  WH_RIGHT  |   _    |    _   |
+ * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | _ |   _    |  WH_LEFT |  WH_DOWN |  WH_RIGHT  |    _   |
  * |---------------------------------------------------------------------------------------------------------------------+
  * | Shift         |  _   |  _   |  _   |  _   |  _   |  _   |  _   |   _    |    _    |    _    |    _       |   _      |
  * |---------------------------------------------------------------------------------------------------------------------+
@@ -110,4 +125,4 @@ also another benefit is that a lot of mice do not have horizontal control button
  */
  ```
  
- 
+ 

keyboards/dz60/keymaps/256k_HHKB/keymap.c

@@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC, KC_RBRC, KC_BSPC,
 		KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT, KC_ENT,
 		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,           KC_RSFT, MO(_FN),
-		            KC_LGUI,             MO(_ALTFN),                      KC_SPC,                    KC_RALT,           MO(_LIGHTS)),
+		            KC_LGUI,             KC_LALT,                      KC_SPC,                    MO(_ALTFN),           MO(_LIGHTS)),
 
 
 
@@ -46,9 +46,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *  ,---------------------------------------------------------------------------------------------------------------------
  * |         | F1   | F2   | F3   | F4    | F5    | F6    | F7   | F8    | F9   | F10   | F11   | F12   | INSERT  |  _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  UP  |  MUTE  |  V_DEC   |  V_INC  | DEL  |
+ * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |    _   |  UP  |  V_DEC   |  V_INC  | DEL  |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | HOME | LEFT | DOWN | RIGHT  |   END    |    _          |
+ * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | HOME |   END    | LEFT | DOWN | RIGHT  |    _          |
  * |---------------------------------------------------------------------------------------------------------------------+
  * | Shift         |  _   |  _   |  _   |  _   |  _   |  _   |  _   |  PREV  |    NEXT  |  PLAY  |    _       |   _      |
  * |---------------------------------------------------------------------------------------------------------------------+
@@ -59,8 +59,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[_ALTFN] = LAYOUT_hhkb(
 
 		MO(_MOUSEFN),  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12,  ______,  KC_PSCR,
-		KC_CAPS,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_UP,  KC_MUTE,  KC_VOLD,   KC_VOLU,  KC_DEL,
+		KC_CAPS,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_UP,  KC_VOLD,   KC_VOLU,  KC_DEL,
-		______,             ______,  ______,  ______,  ______,  ______,  ______,  KC_HOME,   KC_LEFT,   KC_DOWN,   KC_RIGHT,  KC_END, ______,
+		______,             ______,  ______,  ______,  ______,  ______,  ______,  KC_HOME,  KC_END, KC_LEFT,   KC_DOWN,   KC_RIGHT, ______,
 		______,  ______,   ______,  ______,  ______, ______, ______,   ______,  ______,  KC_MPRV,  KC_MNXT, KC_MPLY,     ______,  ______,
 		         ______,           ______,                    ______,                              ______,            ______),
 
@@ -75,9 +75,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *  ,---------------------------------------------------------------------------------------------------------------------
  * |        |  ACC_1  |  ACC_2  |  ACC_3  |  _    |  _    |  _    |  _   |  _    |  _   |  _   |  _   |  _   | _  |  _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  WHEEL_UP  |  _  |   _   |    _   |   _   |
+ * | CAPS     |   _  |   _  |   _   |    _  |    _  |    _  |    _  |    _   |  _  |  WHEEL_UP  |   _   |    _   |   _   |
  * |---------------------------------------------------------------------------------------------------------------------+
- * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | _ |  WH_LEFT |  WH_DOWN |  WH_RIGHT  |   _    |    _   |
+ * | CTRL       |   _   |   _   |   _   |   _   |   _    |   _  | _ |   _    |  WH_LEFT |  WH_DOWN |  WH_RIGHT  |    _   |
  * |---------------------------------------------------------------------------------------------------------------------+
  * | Shift         |  _   |  _   |  _   |  _   |  _   |  _   |  _   |   _    |    _    |    _    |    _       |   _      |
  * |---------------------------------------------------------------------------------------------------------------------+
@@ -89,8 +89,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[_MOUSEFN] = LAYOUT_hhkb(
 
 		______,  KC_ACL0,   KC_ACL1,   KC_ACL2,   ______,   ______,   ______,   ______,   ______,   ______,   ______,  ______,   ______,  ______,  ______,
-		______,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_WH_U,  ______,  ______,   ______,  ______,
+		______,          ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_MS_UP,    ______,   ______,  ______,
-		______,             ______,  ______,  ______,  ______,  ______,  ______,  ______,     KC_WH_L,   KC_WH_D,  KC_WH_R, ______,  ______,
+		______,             ______,  ______,  ______,  ______,  ______,  ______,  ______,   ______,  KC_MS_LEFT,   KC_MS_DOWN,  KC_MS_RIGHT,   ______,
 		______,  ______,   ______,  ______,  ______, ______, ______,   ______,  ______,  ______,  ______, ______,     ______,  ______,
 		         ______,           ______,                    ______,                              ______,            ______),
 

keyboards/dz60/keymaps/default/keymap.c

@@ -59,3 +59,11 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
       break;
   }
 }
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+        DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+    } else {
+        DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+    }
+}

keyboards/dz60/keymaps/eric/keymap.c

@@ -10,20 +10,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * |-----------------------------------------------------------------------------------------+
 * | Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  | Bkspc   |
 * |-----------------------------------------------------------------------------------------+
-* | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+* | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
 * |-----------------------------------------------------------------------------------------+
 * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |   /   |  Shift   | Fn |
 * |-----------------------------------------------------------------------------------------+
-* | Ctrl  |  GUI |  Alt |                    Space               |   Alt   |  GUI  |  Ctrl  |
+* | Caps  |  GUI |  Alt |                    Space               |   Alt   |  GUI  |  Ctrl  |
 * `-----------------------------------------------------------------------------------------'
 */
 
-	KEYMAP_2_SHIFTS(
+	LAYOUT(
-		KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,  KC_5,    KC_6,    KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,   KC_BSLS,   KC_GRV, 
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, 
-		KC_TAB,           KC_Q,    KC_W,   KC_E,  KC_R,    KC_T,    KC_Y,  KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC,  KC_RBRC, KC_BSPC, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, 
-		KC_CAPS,          KC_A,    KC_S,   KC_D,  KC_F,    KC_G,    KC_H,  KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT,  KC_ENT, 
+		KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
-		KC_LSFT, KC_TRNS, KC_Z,    KC_X,   KC_C,  KC_V,    KC_B,    KC_N,  KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,  KC_RSFT,   MO(1),
+		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(2)),
+		KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_RGUI, KC_RCTL),
 
 
 
@@ -31,23 +31,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * ,-----------------------------------------------------------------------------------------.
 * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | INS | Del |
 * |-----------------------------------------------------------------------------------------+
-* |      | PGUP | UP | PGDN | HOME | &  |     |     |     |     | Prnt | UP | Del |  Bkspc  |
+* |      | PGUP | UP | PGDN | HOME | &  |  ~  |     |     |     | Prnt | UP | Del |  Bkspc  |
 * |-----------------------------------------------------------------------------------------+
 * |        | LEFT | DWN | RGHT | END |  *  |    |    | PGUP | HOME | LEFT | RGHT |          |
 * |-----------------------------------------------------------------------------------------+
-* |           |  _  |  +  |  (  |  )  |  |  |  ~  |     | PGDN | END |  DWN  |        |     |
+* |           |  _  |  +  |  (  |  )  |  |  |     |     | PGDN | END |  DWN  |        |     |
 * |-----------------------------------------------------------------------------------------+
 * |       |      |       |                                         |        |      |        |
 * `-----------------------------------------------------------------------------------------'
 */ 
 
 
-	KEYMAP_2_SHIFTS(
+	LAYOUT(
-		KC_TRNS,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL, 
+		KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, 
-		KC_TRNS,  KC_PGUP,  KC_UP,  KC_PGDN,  KC_HOME,  KC_AMPR,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSCR,  KC_UP,    KC_DEL,  KC_BSPC, 
+		KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_HOME, KC_AMPR, KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_DEL, KC_BSPC, 
-		KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_END,  KC_ASTR,  KC_TRNS,  KC_TRNS,  KC_PGUP,  KC_HOME,  KC_LEFT,  KC_RGHT,  KC_TRNS, 
+		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_ASTR, KC_TRNS, KC_TRNS, KC_PGUP, KC_HOME, KC_LEFT, KC_RGHT, KC_TRNS, 
-		KC_TRNS, KC_TRNS,  KC_UNDS,  KC_PLUS,  KC_LPRN,  KC_RPRN,  KC_PIPE,  KC_TILD,  KC_TRNS,  KC_PGDN,   KC_END,  KC_DOWN,  KC_TRNS,  KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_LPRN, KC_RPRN, KC_PIPE, KC_TRNS, KC_TRNS, KC_PGDN, KC_END, KC_DOWN, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS),
+
+	LAYOUT(
+		RESET, KC_A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
 };
 
 enum function_id {
@@ -55,31 +62,31 @@ enum function_id {
 };
 
 const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+  [0] = ACTION_FUNCTION(SHIFT_ESC)
 };
 
 void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
   static uint8_t shift_esc_shift_mask;
   switch (id) {
     case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+		shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
+		if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
+			if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
+			  add_key(KC_GRV);
-          send_keyboard_report();
+			  send_keyboard_report();
-        } else {
+			} else {
-          add_key(KC_ESC);
+			  add_key(KC_ESC);
-          send_keyboard_report();
+			  send_keyboard_report();
-        }
+			}
-      } else {
+		} else {
-        if (shift_esc_shift_mask) {
+			if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
+			  del_key(KC_GRV);
-          send_keyboard_report();
+			  send_keyboard_report();
-        } else {
+			} else {
-          del_key(KC_ESC);
+			  del_key(KC_ESC);
-          send_keyboard_report();
+			  send_keyboard_report();
-        }
+			}
-      }
+		}
-      break;
+		break;
   }
-}
+}

keyboards/eagle_viper/v2/v2.h

@@ -32,7 +32,7 @@
   { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J,   KC_NO, K0K, K0L,   K0M, K0N,   K0O    }  \
 }
 
-#define LAYOUT_eagle( \
+#define LAYOUT_60_ansi( \
     K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M,      K4O, \
     K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,      K3O, \
     K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L,           K2O, \
@@ -74,3 +74,5 @@
   { KC_NO, K0B,   K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J,   KC_NO, KC_NO, KC_NO, K0M, K0N,   KC_NO    }  \
 }
 #endif
+
+#define LAYOUT_eagle LAYOUT_60_ansi

keyboards/ergodone/ergodone.h

@@ -99,6 +99,28 @@ inline void ergodox_led_all_set(uint8_t n)              {}
     { KC_NO, k51, k52, k53, k54, k55,   k56,      k57,   k58,   k59, k5A, k5B, k5C, KC_NO  } \
    }
 
+#define KEYMAP_PRETTY(                                                                                        \
+    /* left hand, spatial positions */     /* right hand, spatial positions */                         \
+    L00,L01,L02,L03,L04,L05,L06,               R00,R01,R02,R03,R04,R05,R06,                            \
+    L10,L11,L12,L13,L14,L15,L16,               R10,R11,R12,R13,R14,R15,R16,                            \
+    L20,L21,L22,L23,L24,L25,                       R21,R22,R23,R24,R25,R26,                            \
+    L30,L31,L32,L33,L34,L35,L36,               R30,R31,R32,R33,R34,R35,R36,                            \
+    L40,L41,L42,L43,L44,                               R42,R43,R44,R45,R46,                            \
+                            L55,L56,       R50,R51,                                                    \
+                                L54,       R52,                                                        \
+                        L53,L52,L51,       R55,R54,R53 )                                               \
+                                          \
+   /* matrix positions */                 \
+   {                                                                            \
+    {   L00,L01,L02,L03,L04,L05,L06,            R00,R01,R02,R03,R04,R05,R06  }, \
+    {   L10,L11,L12,L13,L14,L15,L16,            R10,R11,R12,R13,R14,R15,R16  }, \
+    {   L20,L21,L22,L23,L24,L25,KC_NO,        KC_NO,R21,R22,R23,R24,R25,R26  }, \
+    {   L30,L31,L32,L33,L34,L35,L36,            R30,R31,R32,R33,R34,R35,R36  }, \
+    { L40,L41,L42,L43,L44,KC_NO,KC_NO,    KC_NO,KC_NO,R42,R43,R44,R45,R46    }, \
+    { KC_NO,L51,L52,L53,L54,L55,L56,          R50,R51,R52,R53,R54,R55,KC_NO  }  \
+   }
+
 #define LAYOUT_ergodox KEYMAP
+#define LAYOUT_ergodox_pretty KEYMAP_PRETTY
 
 #endif

keyboards/ergodone/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "Ergodone",
+    "maintainer": "Yu He",
+    "width": 19.5,
+    "height": 9.375,
+
+    "layouts": {
+        "LAYOUT_ergodox": {
+            "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}]
+        },
+        "LAYOUT_ergodox_pretty": {
+            "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}]
+        }
+    }
+}

keyboards/ergodox_ez/ergodox_ez.h

@@ -250,5 +250,7 @@ inline void ergodox_led_all_set(uint8_t n)
 
 #define LAYOUT_ergodox KEYMAP
 #define LAYOUT_ergodox_pretty KEYMAP_PRETTY
+#define LAYOUT_ergodox_80 KEYMAP_80
+#define LAYOUT_ergodox_pretty_80 KEYMAP_PRETTY_80
 
 #endif

keyboards/ergodox_ez/info.json

@@ -1,9 +1,10 @@
 {
-    "keyboard_name": "ErgoDox EZ", 
+    "keyboard_name": "ErgoDox EZ",
-    "url": "ergodox-ez.com", 
+    "url": "ergodox-ez.com",
-    "maintainer": "erez", 
+    "maintainer": "erez",
-    "width": 19.5, 
+    "width": 19.5,
-    "height": 9.375, 
+    "height": 9.375,
+
     "layouts": {
         "LAYOUT_ergodox": {
             "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}]
@@ -11,10 +12,10 @@
         "LAYOUT_ergodox_pretty": {
             "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}]
         },
-        "KEYMAP_80": {
+        "LAYOUT_ergodox_80": {
             "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7}]
         },
-        "KEYMAP_PRETTY_80": {
+        "LAYOUT_ergodox_pretty_80": {
             "layout": [{"x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0, "w":1.5}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1, "h":1.5}, {"x":9.5, "y":1, "h":1.5}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1}, {"x":15.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2, "w":1.5}, {"x":6.5, "y":2.5, "h":1.5}, {"x":9.5, "y":2.5, "h":1.5}, {"x":0, "y":3, "w":1.5}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3, "w":1.5}, {"x":0.5, "y":4}, {"x":1.5, "y":4}, {"x":2.5, "y":4}, {"x":3.5, "y":4}, {"x":4.5, "y":4}, {"x":11.5, "y":4}, {"x":12.5, "y":4}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7}]
         }
     }

keyboards/ergodox_ez/readme.md

@@ -10,7 +10,8 @@ Linux page].  Some distributions provide a binary, maybe called
 
 To flash the firmware:
 
-  - Build the firmware with `make keymapname`, for example `make default`
+  - Build the firmware with `make <keyboardname>:<keymapname>`, for example `make ergodox_ez:default`
+
   - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
     `ergodox_ez_default.hex`
 
@@ -19,10 +20,12 @@ To flash the firmware:
   - Load the .hex file into it.
 
   - Press the Reset button by inserting a paperclip gently into the reset hole
-    in the top right corder.
+    in the top right corner.
 
   - Click the button in the Teensy app to download the firmware.
 
+See also [video demonstration](https://www.youtube.com/watch?v=9PyiGUO9_KQ) using Teensy in auto mode.
+
 To flash with ´teensy-loader-cli´:
 
   - Build the firmware with `make keymapname`, for example `make default`

keyboards/ergodox_infinity/ergodox_infinity.h

@@ -118,6 +118,40 @@ inline void ergodox_led_all_set(uint8_t n) {
     { B80,   B81,   B82,   B83,   B84 }  \
 }
 
+#define KEYMAP_PRETTY(                                                                      \
+    /* left hand, spatial positions */     /* right hand, spatial positions */              \
+    A80, A70, A60, A50, A40, A30, A20,               B20, B30, B40, B50, B60, B70, B80,     \
+    A81, A71, A61, A51, A41, A31, A21,               B21, B31, B41, B51, B61, B71, B81,     \
+    A82, A72, A62, A52, A42, A32,                         B32, B42, B52, B62, B72, B82,     \
+    A83, A73, A63, A53, A43, A33, A23,               B23, B33, B43, B53, B63, B73, B83,     \
+    A84, A74, A64, A54, A44,                                   B44, B54, B64, B74, B84,     \
+                                  A13, A03,     B03, B13,                                   \
+                                       A04,     B04,                                        \
+                             A34, A24, A14,     B14, B24, B34 )                             \
+                                                                                            \
+   /* matrix positions */                \
+ {                                       \
+    { KC_NO, KC_NO, KC_NO, A03,   A04 }, \
+    { KC_NO, KC_NO, KC_NO, A13,   A14 }, \
+    { A20,   A21,   KC_NO, A23,   A24 }, \
+    { A30,   A31,   A32,   A33,   A34 }, \
+    { A40,   A41,   A42,   A43,   A44 }, \
+    { A50,   A51,   A52,   A53,   A54 }, \
+    { A60,   A61,   A62,   A63,   A64 }, \
+    { A70,   A71,   A72,   A73,   A74 }, \
+    { A80,   A81,   A82,   A83,   A84 }, \
+    { KC_NO, KC_NO, KC_NO, B03,   B04 }, \
+    { KC_NO, KC_NO, KC_NO, B13,   B14 }, \
+    { B20,   B21,   KC_NO, B23,   B24 }, \
+    { B30,   B31,   B32,   B33,   B34 }, \
+    { B40,   B41,   B42,   B43,   B44 }, \
+    { B50,   B51,   B52,   B53,   B54 }, \
+    { B60,   B61,   B62,   B63,   B64 }, \
+    { B70,   B71,   B72,   B73,   B74 }, \
+    { B80,   B81,   B82,   B83,   B84 }  \
+}
+
 #define LAYOUT_ergodox KEYMAP
+#define LAYOUT_ergodox_pretty KEYMAP_PRETTY
 
 #endif /* KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ */

keyboards/ergodox_infinity/info.json

@@ -3,8 +3,11 @@
     "width": 19.5,
     "height": 9.375,
     "layouts": {
-        "KEYMAP": {
+        "LAYOUT_ergodox": {
             "layout": [{"label":"#", "x":3.5, "y":0}, {"label":"*", "x":15, "y":0}, {"label":"@", "x":2.5, "y":0.125}, {"label":"$", "x":4.5, "y":0.125}, {"label":"&", "x":14, "y":0.125}, {"label":"(", "x":16, "y":0.125}, {"label":"%", "x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":12, "y":0.25}, {"label":"^", "x":13, "y":0.25}, {"x":0, "y":0.375, "w":1.5}, {"label":"!", "x":1.5, "y":0.375}, {"label":")", "x":17, "y":0.375}, {"x":18, "y":0.375, "w":1.5}, {"label":"E", "x":3.5, "y":1}, {"label":"I", "x":15, "y":1}, {"label":"W", "x":2.5, "y":1.125}, {"label":"R", "x":4.5, "y":1.125}, {"label":"U", "x":14, "y":1.125}, {"label":"O", "x":16, "y":1.125}, {"label":"T", "x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, {"x":12, "y":1.25, "h":1.5}, {"label":"Y", "x":13, "y":1.25}, {"x":0, "y":1.375, "w":1.5}, {"label":"Q", "x":1.5, "y":1.375}, {"label":"P", "x":17, "y":1.375}, {"x":18, "y":1.375, "w":1.5}, {"label":"D", "x":3.5, "y":2}, {"label":"K", "x":15, "y":2}, {"label":"S", "x":2.5, "y":2.125}, {"label":"F", "x":4.5, "y":2.125}, {"label":"J", "x":14, "y":2.125}, {"label":"L", "x":16, "y":2.125}, {"label":"G", "x":5.5, "y":2.25}, {"label":"H", "x":13, "y":2.25}, {"x":0, "y":2.375, "w":1.5}, {"label":"A", "x":1.5, "y":2.375}, {"label":":", "x":17, "y":2.375}, {"x":18, "y":2.375, "w":1.5}, {"x":6.5, "y":2.75, "h":1.5}, {"x":12, "y":2.75, "h":1.5}, {"label":"C", "x":3.5, "y":3}, {"label":"<", "x":15, "y":3}, {"label":"X", "x":2.5, "y":3.125}, {"label":"V", "x":4.5, "y":3.125}, {"label":"M", "x":14, "y":3.125}, {"label":">", "x":16, "y":3.125}, {"label":"B", "x":5.5, "y":3.25}, {"label":"N", "x":13, "y":3.25}, {"x":0, "y":3.375, "w":1.5}, {"label":"Z", "x":1.5, "y":3.375}, {"label":"?", "x":17, "y":3.375}, {"x":18, "y":3.375, "w":1.5}, {"x":3.5, "y":4}, {"x":15, "y":4}, {"x":2.5, "y":4.125}, {"x":4.5, "y":4.125}, {"x":14, "y":4.125}, {"x":16, "y":4.125}, {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":17, "y":4.375}, {"x":18, "y":4.375}, {"x":1, "y":4.375}, {"x":2, "y":4.375}, {"x":0, "y":5.375, "h":2}, {"x":1, "y":5.375, "h":2}, {"x":2, "y":5.375}, {"x":2, "y":6.375}, {"x":-3.0, "y":6.375}, {"x":-2, "y":6.375}, {"x":-3.0, "y":7.375}, {"x":-2, "y":7.375, "h":2}, {"x":-1.0, "y":7.375, "h":2}, {"x":-3.0, "y":8.375}]
+        },
+        "LAYOUT_ergodox_pretty": {
+          "layout": [{"label":"#", "x":3.5, "y":0}, {"label":"*", "x":15, "y":0}, {"label":"@", "x":2.5, "y":0.125}, {"label":"$", "x":4.5, "y":0.125}, {"label":"&", "x":14, "y":0.125}, {"label":"(", "x":16, "y":0.125}, {"label":"%", "x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":12, "y":0.25}, {"label":"^", "x":13, "y":0.25}, {"x":0, "y":0.375, "w":1.5}, {"label":"!", "x":1.5, "y":0.375}, {"label":")", "x":17, "y":0.375}, {"x":18, "y":0.375, "w":1.5}, {"label":"E", "x":3.5, "y":1}, {"label":"I", "x":15, "y":1}, {"label":"W", "x":2.5, "y":1.125}, {"label":"R", "x":4.5, "y":1.125}, {"label":"U", "x":14, "y":1.125}, {"label":"O", "x":16, "y":1.125}, {"label":"T", "x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, {"x":12, "y":1.25, "h":1.5}, {"label":"Y", "x":13, "y":1.25}, {"x":0, "y":1.375, "w":1.5}, {"label":"Q", "x":1.5, "y":1.375}, {"label":"P", "x":17, "y":1.375}, {"x":18, "y":1.375, "w":1.5}, {"label":"D", "x":3.5, "y":2}, {"label":"K", "x":15, "y":2}, {"label":"S", "x":2.5, "y":2.125}, {"label":"F", "x":4.5, "y":2.125}, {"label":"J", "x":14, "y":2.125}, {"label":"L", "x":16, "y":2.125}, {"label":"G", "x":5.5, "y":2.25}, {"label":"H", "x":13, "y":2.25}, {"x":0, "y":2.375, "w":1.5}, {"label":"A", "x":1.5, "y":2.375}, {"label":":", "x":17, "y":2.375}, {"x":18, "y":2.375, "w":1.5}, {"x":6.5, "y":2.75, "h":1.5}, {"x":12, "y":2.75, "h":1.5}, {"label":"C", "x":3.5, "y":3}, {"label":"<", "x":15, "y":3}, {"label":"X", "x":2.5, "y":3.125}, {"label":"V", "x":4.5, "y":3.125}, {"label":"M", "x":14, "y":3.125}, {"label":">", "x":16, "y":3.125}, {"label":"B", "x":5.5, "y":3.25}, {"label":"N", "x":13, "y":3.25}, {"x":0, "y":3.375, "w":1.5}, {"label":"Z", "x":1.5, "y":3.375}, {"label":"?", "x":17, "y":3.375}, {"x":18, "y":3.375, "w":1.5}, {"x":3.5, "y":4}, {"x":15, "y":4}, {"x":2.5, "y":4.125}, {"x":4.5, "y":4.125}, {"x":14, "y":4.125}, {"x":16, "y":4.125}, {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":17, "y":4.375}, {"x":18, "y":4.375}, {"x":1, "y":4.375}, {"x":2, "y":4.375}, {"x":0, "y":5.375, "h":2}, {"x":1, "y":5.375, "h":2}, {"x":2, "y":5.375}, {"x":2, "y":6.375}, {"x":-3.0, "y":6.375}, {"x":-2, "y":6.375}, {"x":-3.0, "y":7.375}, {"x":-2, "y":7.375, "h":2}, {"x":-1.0, "y":7.375, "h":2}, {"x":-3.0, "y":8.375}]
         }
-    }
+  }
 }

keyboards/fc660c/fc660c.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 
-#define KEYMAP( \
+#define LAYOUT( \
     K13, K10, K11, K12, K14, K16, K17, K15, K1B, K18, K19, K1A, K1C, K1E,      K1F, \
     K03, K00, K01, K02, K04, K06, K07, K05, K0B, K08, K09, K0A, K0C, K0E,      K0F, \
     K43, K40, K41, K42, K44, K46, K47, K45, K4B, K48, K49, K4A,      K4E,           \

keyboards/fc660c/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "fc660c", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 16.5, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6}, {"label":"Alt", "x":9.75, "y":4, "w":1.25}, {"label":"Win", "x":11, "y":4, "w":1.25}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}]
+        }
+    }
+}

keyboards/fc660c/keymaps/default/keymap.c

@@ -14,17 +14,17 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "fc660c.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = KEYMAP(
+  [0] = LAYOUT(
         KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,     KC_INS,
         KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,     KC_DEL,
         KC_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,     KC_ENT,
         KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,     KC_UP,
         KC_LCTL,KC_LGUI,KC_LALT,          KC_SPC,                       KC_RALT,KC_RCTL,MO(1),      KC_LEFT,KC_DOWN,KC_RGHT
     ),
-  [1] = KEYMAP(
+  [1] = LAYOUT(
         KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, _______,     _______,
         _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______,     _______,
         _______,_______,_______,_______,_______,_______,_______,_______,KC_HOME,KC_PGUP,_______,_______,     _______,

keyboards/frosty_flake/keymaps/nikchi/keymap.c

@@ -27,7 +27,8 @@ enum taps{
   EMOJIS,
   ANIMAL,
   HAND,
-  MEMES
+  MEMES,
+  COPA
 };
 
 enum unicode_name { // split every five emojis
@@ -50,8 +51,8 @@ enum unicode_name { // split every five emojis
   THDN, // 👎
 
   BBB, // dat B 🅱
-  POO, // poop 💩
+  AVO, // avocado 🥑
-  HUNDR, // 100 💯
+  BRED, // unicode consortium pls make toast 🍞
   EGGPL, // EGGPLANT 🍆
   WATER, // wet 💦
 
@@ -71,6 +72,7 @@ enum my_macros {
 qk_tap_dance_action_t tap_dance_actions[] = {
   // Tap once for CTRL, twice for Caps Lock
   [TD_CTCPS]  = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_CAPS),
+  [COPA]  = ACTION_TAP_DANCE_DOUBLE(LCTL(KC_C), LCTL(KC_V)),
   [EMOJIS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEmojis, NULL, NULL, 800),
   [ANIMAL] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAnimals, NULL, NULL, 800),
   [HAND] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleHands, NULL, NULL, 800),
@@ -110,8 +112,8 @@ const uint32_t PROGMEM unicode_map[] = {
   [THINK] = 0x1F914,
   [GRIN] = 0x1F600,
   [BBB] = 0x1F171,
-  [POO] = 0x1F4A9,
+  [AVO] = 0x1F951,
-  [HUNDR] = 0x1F4AF,
+  [BRED] = 0x1F35E,
   [SMRK] = 0x1F60F,
   [WEARY] = 0x1F629,
   [EGGPL] = 0x1F346,
@@ -143,7 +145,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    TD(EMOJIS),TD(ANIMAL),TD(HAND),TD(MEMES),X(WEARY),X(UNAMU),   KC_6,   KC_7,   KC_8,   KC_9,   KC_0, KC_MINS, KC_EQL,KC_BSPC,   KC_MPRV,KC_MPLY,KC_MNXT,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
       KC_TAB,   KC_Q,   M(0),   KC_E,   KC_R,X(EGGPL),X(WATER),   KC_U,   KC_I,   KC_O,   KC_P, KC_UP  ,KC_RBRC,KC_BSLS,   KC_MUTE,KC_VOLD,KC_VOLU,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
       KC_LCTL,   M(1),   M(3),   M(2),   KC_F,   X(LIT), X(SNEK),   KC_J,   KC_K,   KC_L,KC_LEFT,KC_RGHT,         KC_ENT,                              KC_P4,  KC_P5,  KC_P6,      \
-      KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C, X(HUNDR), X(BBB),  X(POO),   KC_M,KC_COMM, KC_DOT,KC_DOWN,        KC_RSFT,          KC_MS_U,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
+      KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C, TD(COPA), X(BBB),  X(AVO),   KC_M,KC_COMM, KC_DOT,KC_DOWN,        KC_RSFT,          KC_MS_U,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
       KC_BTN1,KC_BTN3,KC_BTN2,                 KC_SPC,                                KC_RALT,KC_RGUI, TG(2),_______  ,  KC_MS_L,KC_MS_D,KC_MS_R,    KC_P0,KC_PDOT),
 [2] = KEYMAP(\
       KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,           KC_PSCR,KC_SLCK,KC_PAUS,                        \

keyboards/handwired/dactyl/config.h

@@ -30,12 +30,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT         Dactyl
 #define DESCRIPTION     An ortholinear, split, 3D-curved keyboard with thumb clusters.
 
-/* key matrix size
+#define DIODE_DIRECTION ROW2COL
- * At this time, "row" in the dactyl's code actually means "column" on the
+#define MATRIX_ROWS 6
- * physical keyboard. It's confusing. I'm sorry. Blame Jack Humbert :P
+#define MATRIX_COLS 12
- */
+#define COL_EXPANDED { true, true, true, true, true, true, false, false, false, false, false, false}
-#define MATRIX_ROWS 12
+#define MATRIX_ONBOARD_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COLS 6
+#define MATRIX_ONBOARD_COL_PINS { 0, 0, 0, 0, 0, 0, B1, B2, B3, D2, D3, C6 }
+#define EXPANDER_COL_REGISTER 0
+#define MATRIX_EXPANDER_COL_PINS {0, 1, 2, 3, 4, 5}
+#define MATRIX_EXPANDER_ROW_PINS {0, 1, 2, 3, 4, 5}
 
 #define MOUSEKEY_INTERVAL     20
 #define MOUSEKEY_DELAY        0

keyboards/handwired/dactyl/dactyl.c

@@ -1,80 +1,15 @@
 #include "dactyl.h"
 #include "i2cmaster.h"
 
-
-bool i2c_initialized = 0;
-uint8_t mcp23018_status = 0x20;
-
-void matrix_init_kb(void) {
-    DDRB  &= ~(1<<4);  // set B(4) as input
-    PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled
-
-    // unused pins - C7, D4, D5, D7, E6
-    // set as input with internal pull-up enabled
-    DDRC  &= ~(1<<7);
-    DDRD  &= ~(1<<5 | 1<<4);
-    DDRE  &= ~(1<<6);
-    PORTC |=  (1<<7);
-    PORTD |=  (1<<5 | 1<<4);
-    PORTE |=  (1<<6);
-
-    matrix_init_user();
-}
-
-uint8_t init_mcp23018(void) {
-    mcp23018_status = 0x20;
-
-    // I2C subsystem
-
-    if (i2c_initialized == 0) {
-        i2c_init();  // on pins D(1,0)
-        i2c_initialized = true;
-        _delay_ms(1000);
-    }
-
-    // set pin direction
-    // - unused  : input  : 1
-    // - input   : input  : 1
-    // - driving : output : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(IODIRA);            if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00000000);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00111111);        if (mcp23018_status) goto out;
-    i2c_stop();
-
-    // set pull-up
-    // - unused  : on  : 1
-    // - input   : on  : 1
-    // - driving : off : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(GPPUA);             if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00000000);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00111111);        if (mcp23018_status) goto out;
-
-out:
-    i2c_stop();
-
-    return mcp23018_status;
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
-    /* Left hand, matrix positions */
+    {{0,11}, {0,10}, {0,9},  {0,8},  {0,7},  {0,6},     {0,5},  {0,4},  {0,3},  {0,2},  {0,1},  {0,0}},
-    {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}},
+    {{1,11}, {1,11}, {1,9},  {1,8},  {1,7},  {1,6},     {1,5},  {1,4},  {1,3},  {1,2},  {1,1},  {1,0}},
-    {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}},
+    {{2,11}, {2,12}, {2,9},  {2,8},  {2,7},  {2,6},     {2,5},  {2,4},  {2,3},  {2,2},  {2,1},  {2,0}},
-    {{0,9},  {1,9},  {2,9},  {3,9},  {4,9},  {5,9}},
+    {{3,11}, {3,13}, {3,9},  {3,8},  {3,7},  {3,6},     {3,5},  {3,4},  {3,3},  {3,2},  {3,1},  {3,0}},
-    {{0,8},  {1,8},  {2,8},  {3,8},  {4,8},  {5,8}},
+    {{4,11}, {4,14}, {4,9},  {4,8},  {4,7},  {4,6},     {4,5},  {4,4},  {4,3},  {4,2},  {4,1},  {4,0}},
-    {{0,7},  {1,7},  {2,7},  {3,7},  {4,7},  {5,7}},
+    {{5,11}, {5,15}, {5,9},  {5,8},  {5,7},  {5,6},     {5,5},  {5,4},  {5,3},  {5,2},  {5,1},  {5,0}},
-    {{0,6},  {1,6},  {2,6},  {3,6},  {4,6},  {5,6}},
-
-    /* Right hand, matrix positions */
-    {{0,5},  {1,5},  {2,5},  {3,5},  {4,5},  {5,5}},
-    {{0,4},  {1,4},  {2,4},  {3,4},  {4,4},  {5,4}},
-    {{0,3},  {1,3},  {2,3},  {3,3},  {4,3},  {5,3}},
-    {{0,2},  {1,2},  {2,2},  {3,2},  {4,2},  {5,2}},
-    {{0,1},  {1,1},  {2,1},  {3,1},  {4,1},  {5,1}},
-    {{0,0},  {1,0},  {2,0},  {3,0},  {4,0},  {5,0}},
 };
 #endif

keyboards/handwired/dactyl/dactyl.h

@@ -10,7 +10,6 @@
 #define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
 #define CPU_16MHz       0x00
 
-// I2C aliases and register addresses (see "mcp23018.md")
 #define I2C_ADDR        0b0100000
 #define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
 #define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
@@ -23,52 +22,46 @@
 #define OLATA           0x14            // output latch register
 #define OLATB           0x15
 
-extern uint8_t mcp23018_status;
+extern uint8_t expander_status;
+extern uint8_t expander_input_pin_mask;
+extern bool i2c_initialized;
 
 void init_dactyl(void);
-uint8_t init_mcp23018(void);
+void init_expander(void);
 
-#define KEYMAP(                                                 \
+#define KEYMAP(                                                         \
-                                                                \
+                                                                        \
-    /* left hand, spatial positions */                          \
+    /* left hand, spatial positions */                                  \
-    k00,k01,k02,k03,k04,k05,                                    \
+    k00,k01,k02,k03,k04,k05,                                            \
-    k10,k11,k12,k13,k14,k15,                                    \
+    k10,k11,k12,k13,k14,k15,                                            \
-    k20,k21,k22,k23,k24,k25,                                    \
+    k20,k21,k22,k23,k24,k25,                                            \
-    k30,k31,k32,k33,k34,k35,                                    \
+    k30,k31,k32,k33,k34,k35,                                            \
-    k40,k41,k42,k43,k44,                                        \
+    k40,k41,k42,k43,k44,                                                \
-                            k55,k50,                            \
+                            k55,k50,                                    \
-                                k54,                            \
+                                k54,                                    \
-                        k53,k52,k51,                            \
+                        k53,k52,k51,                                    \
-                                                                \
+                                                                        \
-    /* right hand, spatial positions */                         \
+    /* right hand, spatial positions */                                 \
-            k06,k07,k08,k09,k0A,k0B,                            \
+            k06,k07,k08,k09,k0A,k0B,                                    \
-            k16,k17,k18,k19,k1A,k1B,                            \
+            k16,k17,k18,k19,k1A,k1B,                                    \
-            k26,k27,k28,k29,k2A,k2B,                            \
+            k26,k27,k28,k29,k2A,k2B,                                    \
-            k36,k37,k38,k39,k3A,k3B,                            \
+            k36,k37,k38,k39,k3A,k3B,                                    \
-                k47,k48,k49,k4A,k4B,                            \
+                k47,k48,k49,k4A,k4B,                                    \
-    k5B,k56,                                                    \
+    k5B,k56,                                                            \
-    k57,                                                        \
+    k57,                                                                \
-    k5A,k59,k58 )                                               \
+    k5A,k59,k58 )                                                       \
-                                                                \
+                                                                        \
-   /* matrix positions */                                       \
+   /* matrix positions */                                               \
-   {                                                            \
+   {                                                                    \
-    { k00, k10, k20,   k30, k40,   k50   }, \
+    { k00, k01, k02, k03, k04, k05,     k06, k07, k08, k09, k0A, k0B }, \
-    { k01, k11, k21,   k31, k41,   k51   }, \
+    { k10, k11, k12, k13, k14, k15,     k16, k17, k18, k19, k1A, k1B }, \
-    { k02, k12, k22,   k32, k42,   k52   }, \
+    { k20, k21, k22, k23, k24, k25,     k26, k27, k28, k29, k2A, k2B }, \
-    { k03, k13, k23,   k33, k43,   k53   }, \
+    { k30, k31, k32, k33, k34, k35,     k36, k37, k38, k39, k3A, k3B }, \
-    { k04, k14, k24,   k34, k44,   k54   }, \
+    { k40, k41, k42, k43, k44, KC_NO, KC_NO, k47, k48, k49, k4A, k4B }, \
-    { k05, k15, k25,   k35, KC_NO, k55   }, \
+    { k50, k51, k52, k53, k54, k55,     k56, k57, k58, k59, k5A, k5B }, \
-                                            \
-    { k06, k16, k26,   k36, KC_NO, k56   }, \
-    { k07, k17, k27,   k37, k47,   k57   }, \
-    { k08, k18, k28,   k38, k48,   k58   }, \
-    { k09, k19, k29,   k39, k49,   k59   }, \
-    { k0A, k1A, k2A,   k3A, k4A,   k5A   }, \
-    { k0B, k1B, k2B,   k3B, k4B,   k5B   }  \
    }
 
 
-
 #define LAYOUT_dactyl KEYMAP
 
 #endif

keyboards/handwired/dactyl/matrix.c

@@ -1,5 +1,4 @@
 /*
-
 Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
 Copyright 2017 Erin Call <hello@erincall.com>
 
@@ -16,10 +15,6 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-
-/*
- * scan matrix
- */
 #include <stdint.h>
 #include <stdbool.h>
 #include <avr/io.h>
@@ -31,47 +26,66 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "matrix.h"
 #include "dactyl.h"
 #include "i2cmaster.h"
-#ifdef DEBUG_MATRIX_SCAN_RATE
+#include "timer.h"
-#include  "timer.h"
+
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
 #endif
 
-/*
+#if (DEBOUNCING_DELAY > 0)
- * This constant define not debouncing time in msecs, but amount of matrix
+    static uint16_t debouncing_time;
- * scan loops which should be made to get stable debounced results.
+    static bool debouncing = false;
- *
+#endif
- * On the Dactyl, the matrix scan rate is relatively low, because
+
- * communicating with the left hand's I/O expander is slower than simply
+#ifdef MATRIX_MASKED
- * selecting local pins.
+    extern const matrix_row_t matrix_mask[];
- * Now it's only 317 scans/second, or about 3.15 msec/scan.
+#endif
- * According to Cherry specs, debouncing time is 5 msec.
+
- *
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
- * And so, there is no sense to have DEBOUNCE higher than 2.
+static const uint8_t onboard_row_pins[MATRIX_ROWS] = MATRIX_ONBOARD_ROW_PINS;
- */
+static const uint8_t onboard_col_pins[MATRIX_COLS] = MATRIX_ONBOARD_COL_PINS;
-
+static const bool col_expanded[MATRIX_COLS] = COL_EXPANDED;
-#ifndef DEBOUNCE
+static const uint8_t expander_row_pins[MATRIX_ROWS] = MATRIX_EXPANDER_ROW_PINS;
-#   define DEBOUNCE	5
+static const uint8_t expander_col_pins[MATRIX_COLS] = MATRIX_EXPANDER_COL_PINS;
 #endif
 
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];
 
-// Debouncing: store for each key the number of scans until it's eligible to
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-// change.  When scanning the matrix, ignore any changes in keys that have
+
-// already changed in the last DEBOUNCE scans.
+#if (DIODE_DIRECTION == COL2ROW)
-static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS];
+    static void init_cols(void);
-
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
-static matrix_row_t read_cols(uint8_t row);
+    static void unselect_rows(void);
-static void init_cols(void);
+    static void select_row(uint8_t row);
-static void unselect_rows(void);
+    static void unselect_row(uint8_t row);
-static void select_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void select_col(uint8_t col);
+    static void unselect_col(uint8_t col);
+#endif
 
-static uint8_t mcp23018_reset_loop;
+static uint8_t expander_reset_loop;
+uint8_t expander_status;
+uint8_t expander_input_pin_mask;
+bool i2c_initialized = false;
 
 #ifdef DEBUG_MATRIX_SCAN_RATE
 uint32_t matrix_timer;
 uint32_t matrix_scan_count;
 #endif
 
+#define ROW_SHIFTER ((matrix_row_t)1)
+#if (DIODE_DIRECTION == COL2ROW)
+// bitmask to ensure the row state from the expander only applies to its columns
+#define EXPANDER_MASK ((matrix_row_t)0b00111111)
+#endif
 
 __attribute__ ((weak))
 void matrix_init_user(void) {}
@@ -103,20 +117,20 @@ uint8_t matrix_cols(void)
 
 void matrix_init(void)
 {
-    // initialize row and col
+    init_expander();
-
-    mcp23018_status = init_mcp23018();
-
 
+#if (DIODE_DIRECTION == COL2ROW)
     unselect_rows();
     init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
         matrix[i] = 0;
-        for (uint8_t j=0; j < MATRIX_COLS; ++j) {
+        matrix_debouncing[i] = 0;
-            debounce_matrix[i * MATRIX_COLS + j] = 0;
-        }
     }
 
 #ifdef DEBUG_MATRIX_SCAN_RATE
@@ -125,59 +139,100 @@ void matrix_init(void)
 #endif
 
     matrix_init_quantum();
-
 }
 
-void matrix_power_up(void) {
+void init_expander(void) {
-    mcp23018_status = init_mcp23018();
+    if (! i2c_initialized) {
-
+        i2c_init();
-    unselect_rows();
+        wait_us(1000000);
-    init_cols();
+    }
 
-    // initialize matrix state: all keys off
+    if (! expander_input_pin_mask) {
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+#if (DIODE_DIRECTION == COL2ROW)
-        matrix[i] = 0;
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (col_expanded[col]) {
+                expander_input_pin_mask |= (1 << expander_col_pins[col]);
+            }
+        }
+#elif (DIODE_DIRECTION == ROW2COL)
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            expander_input_pin_mask |= (1 << expander_row_pins[row]);
+        }
+#endif
     }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
+    expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out;
-    matrix_timer = timer_read32();
+    expander_status = i2c_write(IODIRA);         if (expander_status) goto out;
-    matrix_scan_count = 0;
+
+    /*
+    Pin direction and pull-up depends on both the diode direction
+    and on whether the column register is 0 ("A") or 1 ("B"):
+    +-------+---------------+---------------+
+    |       | ROW2COL       | COL2ROW       |
+    +-------+---------------+---------------+
+    | Reg 0 | input, output | output, input |
+    +-------+---------------+---------------+
+    | Reg 1 | output, input | input, output |
+    +-------+---------------+---------------+
+    */
+
+#if (EXPANDER_COLUMN_REGISTER == 0)
+#   if (DIODE_DIRECTION == COL2ROW)
+        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+        expander_status = i2c_write(0);                       if (expander_status) goto out;
+#   elif (DIODE_DIRECTION == ROW2COL)
+        expander_status = i2c_write(0);                       if (expander_status) goto out;
+        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+#   endif
+#elif (EXPANDER_COLUMN_REGISTER == 1)
+#   if (DIODE_DIRECTION == COL2ROW)
+        expander_status = i2c_write(0);                       if (expander_status) goto out;
+        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+#   elif (DIODE_DIRECTION == ROW2COL)
+        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+        expander_status = i2c_write(0);                       if (expander_status) goto out;
+#   endif
 #endif
-}
 
-// Returns a matrix_row_t whose bits are set if the corresponding key should be
+    i2c_stop();
-// eligible to change in this scan.
+
-matrix_row_t debounce_mask(uint8_t row) {
+    // set pull-up
-  matrix_row_t result = 0;
+    // - unused  : off : 0
-  for (uint8_t j=0; j < MATRIX_COLS; ++j) {
+    // - input   : on  : 1
-    if (debounce_matrix[row * MATRIX_COLS + j]) {
+    // - driving : off : 0
-      --debounce_matrix[row * MATRIX_COLS + j];
+    expander_status = i2c_start(I2C_ADDR_WRITE);              if (expander_status) goto out;
-    } else {
+    expander_status = i2c_write(GPPUA);                       if (expander_status) goto out;
-      result |= (1 << j);
+#if (EXPANDER_COLUMN_REGISTER == 0)
-    }
+#   if (DIODE_DIRECTION == COL2ROW)
-  }
+        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
-  return result;
+        expander_status = i2c_write(0);                       if (expander_status) goto out;
-}
+#   elif (DIODE_DIRECTION == ROW2COL)
+        expander_status = i2c_write(0);                       if (expander_status) goto out;
+        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+#   endif
+#elif (EXPANDER_COLUMN_REGISTER == 1)
+#   if (DIODE_DIRECTION == COL2ROW)
+        expander_status = i2c_write(0);                       if (expander_status) goto out;
+        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+#   elif (DIODE_DIRECTION == ROW2COL)
+        expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out;
+        expander_status = i2c_write(0);                       if (expander_status) goto out;
+#   endif
+#endif
 
-// Report changed keys in the given row.  Resets the debounce countdowns
+out:
-// corresponding to each set bit in 'change' to DEBOUNCE.
+    i2c_stop();
-void debounce_report(matrix_row_t change, uint8_t row) {
-  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
-    if (change & (1 << i)) {
-      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
-    }
-  }
 }
 
 uint8_t matrix_scan(void)
 {
-    if (mcp23018_status) { // if there was an error
+    if (expander_status) { // if there was an error
-        if (++mcp23018_reset_loop == 0) {
+        if (++expander_reset_loop == 0) {
-            // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
+            // since expander_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
             // this will be approx bit more frequent than once per second
-            print("trying to reset mcp23018\n");
+            print("trying to reset expander\n");
-            mcp23018_status = init_mcp23018();
+            init_expander();
-            if (mcp23018_status) {
+            if (expander_status) {
                 print("left side not responding\n");
             } else {
                 print("left side attached\n");
@@ -199,37 +254,71 @@ uint8_t matrix_scan(void)
     }
 #endif
 
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+#if (DIODE_DIRECTION == COL2ROW)
-        select_row(i);
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
-        wait_us(30);  // without this wait read unstable value.
+#       if (DEBOUNCING_DELAY > 0)
-        matrix_row_t mask = debounce_mask(i);
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
-        matrix_row_t cols = (read_cols(i) & mask) | (matrix[i] & ~mask);
+
-        debounce_report(cols ^ matrix[i], i);
+            if (matrix_changed) {
-        matrix[i] = cols;
+                debouncing = true;
-
+                debouncing_time = timer_read();
-        unselect_rows();
+            }
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
     }
 
-    matrix_scan_quantum();
+#elif (DIODE_DIRECTION == ROW2COL)
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+            read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+#endif
 
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+
+    matrix_scan_quantum();
     return 1;
 }
 
 bool matrix_is_modified(void) // deprecated and evidently not called.
 {
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
     return true;
 }
 
 inline
 bool matrix_is_on(uint8_t row, uint8_t col)
 {
-    return (matrix[row] & ((matrix_row_t)1<<col));
+    return (matrix[row] & (ROW_SHIFTER << col));
 }
 
 inline
 matrix_row_t matrix_get_row(uint8_t row)
 {
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
     return matrix[row];
+#endif
 }
 
 void matrix_print(void)
@@ -251,143 +340,203 @@ uint8_t matrix_key_count(void)
     return count;
 }
 
-/* Column pin configuration
+#if (DIODE_DIRECTION == COL2ROW)
- *
- * Teensy
- * col: 0   1   2   3   4   5
- * pin: F0  F1  F4  F5  F6  F7
- *
- * MCP23018
- * col: 0   1   2   3   4   5
- * pin: B5  B4  B3  B2  B1  B0
- */
-static void  init_cols(void)
-{
-    // init on mcp23018
-    // not needed, already done as part of init_mcp23018()
 
-    // init on teensy
+static void init_cols(void) {
-    // Input with pull-up(DDR:0, PORT:1)
+    for (uint8_t x = 0; x < MATRIX_COLS; x++) {
-    DDRF  &= ~(1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0);
+        if (! col_expanded[x]) {
-    PORTF |=  (1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0);
+            uint8_t pin = onboard_col_pins[x];
+            _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+            _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+        }
+    }
 }
 
-static matrix_row_t read_cols(uint8_t row)
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
-{
+    // Store last value of row prior to reading
-    if (row < 6) {
+    matrix_row_t last_row_value = current_matrix[current_row];
-        if (mcp23018_status) { // if there was an error
+
-            return 0;
+    // Clear data in matrix row
-        } else {
+    current_matrix[current_row] = 0;
-            uint8_t data = 0;
+
-            mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
+    // Select row and wait for row selection to stabilize
-            mcp23018_status = i2c_write(GPIOB);             if (mcp23018_status) goto out;
+    select_row(current_row);
-            mcp23018_status = i2c_start(I2C_ADDR_READ);     if (mcp23018_status) goto out;
+    wait_us(30);
-            data = i2c_readNak();
+
-            data = ~data;
+    // Read columns from expander, unless it's in an error state
+    if (! expander_status) {
+        expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out;
+        expander_status = i2c_write(GPIOA);          if (expander_status) goto out;
+        expander_status = i2c_start(I2C_ADDR_READ);  if (expander_status) goto out;
+
+        current_matrix[current_row] |= (~i2c_readNak()) & EXPANDER_MASK;
+
         out:
             i2c_stop();
-            return data;
+    }
+
+    // Read columns from onboard pins
+    for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+        if (! col_expanded[col_index]) {
+            uint8_t pin = onboard_col_pins[col_index];
+            uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+            current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
         }
-    } else {
-        // read from teensy
-        return
-            (PINF&(1<<0) ? 0 : (1<<0)) |
-            (PINF&(1<<1) ? 0 : (1<<1)) |
-            (PINF&(1<<4) ? 0 : (1<<2)) |
-            (PINF&(1<<5) ? 0 : (1<<3)) |
-            (PINF&(1<<6) ? 0 : (1<<4)) |
-            (PINF&(1<<7) ? 0 : (1<<5)) ;
     }
+
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
 }
 
-/* Row pin configuration
+static void select_row(uint8_t row) {
- *
+    // select on expander, unless it's in an error state
- * Teensy
+    if (! expander_status) {
- * row: 6   7   8   9   10  11
+        // set active row low  : 0
- * pin: B1  B2  B3  D2  D3  C6
+        // set other rows hi-Z : 1
- *
+        expander_status = i2c_start(I2C_ADDR_WRITE);   if (expander_status) goto out;
- * MCP23018
+        expander_status = i2c_write(GPIOB);            if (expander_status) goto out;
- * row: 0   1   2   3   4   5
+        expander_status = i2c_write(0xFF & ~(1<<row)); if (expander_status) goto out;
- * pin: A0  A1  A2  A3  A4  A5
- */
-static void unselect_rows(void)
-{
-    // unselect on mcp23018
-    if (mcp23018_status) { // if there was an error
-        // do nothing
-    } else {
-        // set all rows hi-Z : 1
-        mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
-        mcp23018_status = i2c_write(GPIOA);          if (mcp23018_status) goto out;
-        mcp23018_status = i2c_write(0xFF);           if (mcp23018_status) goto out;
     out:
         i2c_stop();
     }
 
+    // select on teensy
+    uint8_t pin = onboard_row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    // No need to explicitly unselect expander pins--their I/O state is
+    // set simultaneously, with a single bitmask sent to i2c_write. When
+    // select_row selects a single pin, it implicitly unselects all the
+    // other ones.
+
     // unselect on teensy
-    // Hi-Z(DDR:0, PORT:0) to unselect
+    uint8_t pin = onboard_row_pins[row];
-    DDRB  &= ~(1<<1 | 1<<2 | 1<<3);
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // OUT
-    PORTB &= ~(1<<1 | 1<<2 | 1<<3);
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // LOW
-    DDRD  &= ~(1<<2 | 1<<3);
+}
-    PORTD &= ~(1<<2 | 1<<3);
+
-    DDRC  &= ~(1<<6);
+static void unselect_rows(void) {
-    PORTC &= ~(1<<6);
+    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        unselect_row(x);
+    }
 }
 
-/* Row pin configuration
+#elif (DIODE_DIRECTION == ROW2COL)
- *
+
- * Teensy
+static void init_rows(void)
- * row: 6   7   8   9   10  11
- * pin: B1  B2  B3  D2  D3  C6
- *
- * MCP23018
- * row: 0   1   2   3   4   5
- * pin: A0  A1  A2  A3  A4  A5
- */
-static void select_row(uint8_t row)
 {
-    if (row < 6) {
+    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
-        // select on mcp23018
+        uint8_t pin = onboard_row_pins[x];
-        if (mcp23018_status) { // if there was an error
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    uint8_t column_state = 0;
+
+    //select col and wait for selection to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    if (current_col < 6) {
+        // read rows from expander
+        if (expander_status) {
+            // it's already in an error state; nothing we can do
+            return false;
+        }
+
+        expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out;
+        expander_status = i2c_write(GPIOB);          if (expander_status) goto out;
+        expander_status = i2c_start(I2C_ADDR_READ);  if (expander_status) goto out;
+        column_state = i2c_readNak();
+
+        out:
+            i2c_stop();
+
+        column_state = ~column_state;
+    } else {
+        for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+            if ((_SFR_IO8(onboard_row_pins[current_row] >> 4) & _BV(onboard_row_pins[current_row] & 0xF)) == 0) {
+                column_state |= (1 << current_row);
+            }
+        }
+    }
+
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[current_row];
+
+        if (column_state & (1 << current_row)) {
+            // key closed; set state bit in matrix
+            current_matrix[current_row] |= (ROW_SHIFTER << current_col);
+        } else {
+            // key open; clear state bit in matrix
+            current_matrix[current_row] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine whether the matrix changed state
+        if ((last_row_value != current_matrix[current_row]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    if (col_expanded[col]) {
+        // select on expander
+        if (expander_status) { // if there was an error
             // do nothing
         } else {
-            // set active row low  : 0
+            // set active col low  : 0
-            // set other rows hi-Z : 1
+            // set other cols hi-Z : 1
-            mcp23018_status = i2c_start(I2C_ADDR_WRITE);   if (mcp23018_status) goto out;
+            expander_status = i2c_start(I2C_ADDR_WRITE);   if (expander_status) goto out;
-            mcp23018_status = i2c_write(GPIOA);            if (mcp23018_status) goto out;
+            expander_status = i2c_write(GPIOA);            if (expander_status) goto out;
-            mcp23018_status = i2c_write(0xFF & ~(1<<row)); if (mcp23018_status) goto out;
+            expander_status = i2c_write(0xFF & ~(1<<col)); if (expander_status) goto out;
         out:
             i2c_stop();
         }
     } else {
         // select on teensy
-        // Output low(DDR:1, PORT:0) to select
+        uint8_t pin = onboard_col_pins[col];
-        switch (row) {
+        _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-            case 6:
+        _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-                DDRB  |= (1<<1);
+    }
-                PORTB &= ~(1<<1);
+}
-                break;
+
-            case 7:
+static void unselect_col(uint8_t col)
-                DDRB  |= (1<<2);
+{
-                PORTB &= ~(1<<2);
+    if (col_expanded[col]) {
-                break;
+        // No need to explicitly unselect expander pins--their I/O state is
-            case 8:
+        // set simultaneously, with a single bitmask sent to i2c_write. When
-                DDRB  |= (1<<3);
+        // select_col selects a single pin, it implicitly unselects all the
-                PORTB &= ~(1<<3);
+        // other ones.
-                break;
+    } else {
-            case 9:
+        // unselect on teensy
-                DDRD  |= (1<<2);
+        uint8_t pin = onboard_col_pins[col];
-                PORTD &= ~(1<<3);
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-                break;
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-            case 10:
-                DDRD  |= (1<<3);
-                PORTD &= ~(1<<3);
-                break;
-            case 11:
-                DDRC  |= (1<<6);
-                PORTC &= ~(1<<6);
-                break;
-        }
     }
 }
 
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        unselect_col(x);
+    }
+}
+#endif

keyboards/helix/rev2/config.h

@@ -56,7 +56,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_TIMER
-#define RGBLED_NUM 12    // Number of LEDs
+//#define RGBLED_NUM 12    // Number of LEDs. see ./keymaps/default/config.h
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 

keyboards/helix/rev2/keymaps/default/config.h

@@ -36,11 +36,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define EE_HANDS
 
 // Helix keyboard OLED support
-//#define SSD1306OLED
+//      see ./rules.mk: OLED_ENABLE=yes or no
+#ifdef OLED_ENABLE
+  #define SSD1306OLED
+#endif
 
 /* Select rows configuration */
 // Rows are 4 or 5
-#define HELIX_ROWS 5
+// #define HELIX_ROWS 5 see ./rules.mk
 
 /* key matrix size */
 // Rows are doubled-up
@@ -62,12 +65,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100
 
+// Helix keyboard RGB LED support
+//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
+//    see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes
+#ifdef RGBLED_BACK
+  #if HELIX_ROWS == 4
+    #define RGBLED_NUM 25
+  #elif HELIX_ROWS == 5
+    #define RGBLED_NUM 32
+  #endif
+#else
+  #define RGBLED_NUM 6
+#endif
 
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-// Helix keyboard : see ./rules.mk: RGBLIGHT_ENABLE = yes or no
-// Helix keyboard : RGBLED_NUM 6 or 32
-#define RGBLED_NUM 6
 #if RGBLED_NUM <= 6
   #define RGBLIGHT_LIMIT_VAL 255
 #else

keyboards/helix/rev2/keymaps/default/readme.md

@@ -1,25 +1,141 @@
-SSD1306 OLED Display via I2C
+# The Default Helix Layout
-======
+## Layout
 
-Features
+### Qwerty
---------
 
-Some features supported by the firmware:
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+ `-------------------------------------------------------------------------------------------------'
+```
 
+### Colemak
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Tab  |   Q  |   W  |   F  |   P  |   G  |             |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Ctrl |   A  |   R  |   S  |   T  |   D  |             |   H  |   N  |   E  |   I  |   O  |  '   |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+ `-------------------------------------------------------------------------------------------------'
+```
 
-* I2C connection between the two halves is required as the OLED display will use this connection as well. Note this
+### Dvorak
-  requires pull-up resistors on the data and clock lines.
+```
-* OLED display will connect from either side
+ ,-----------------------------------------.             ,-----------------------------------------.
+ |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Tab  |   '  |   ,  |   .  |   P  |   Y  |             |   F  |   G  |   C  |   R  |   L  | Del  |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Ctrl |   A  |   O  |   E  |   U  |   I  |             |   D  |   H  |   T  |   N  |   S  |  /   |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ | Shift|   ;  |   Q  |   J  |   K  |   X  |   [  |   ]  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+ `-------------------------------------------------------------------------------------------------'
+```
 
+## Layers
 
-Wiring
+|Priority|number|name|description|
-------
+| ---- | ---- | --- | --- |
+|high|16|Adjust|Functions|
+||4|Raise|Numeric charactors|
+||3|Lower|Other charactors|
+||2|Dvorak|Dvorak leyout|
+||1|Colemak|Colemak leyout|
+|low|0|Qwerty|QWERTY leyout(base)|
 
+### Lower
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |      |  F7  |  F8  |  F9  |  F10 |  F11 |  (   |   )  |  F12 |      |      | Home | End  |      |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ `-------------------------------------------------------------------------------------------------'
+```
 
-Work in progress...
+### Raise
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      |PageDn|PageUp|      |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ `-------------------------------------------------------------------------------------------------'
+```
 
+### Adjust (Lower + Raise)
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ |      | Reset|RGBRST|      |      |      |             |      |      |      |      |      |  Del |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ |      |      |      |Aud on|Audoff| Mac  |             | Win  |Qwerty|Colemk|Dvorak|      |      |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |      |      |      |      |      |      |      |      |      |      |RGB ON| HUE+ | SAT+ | VAL+ |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+ `-------------------------------------------------------------------------------------------------'
+```
 
-OLED Configuration
+## Customize
--------------------------------
+
+see `qmk_firmware/keyboards/helix/rev2/keymaps/default/rules.mk`
+
+```
+# Helix keyboard customize
+# you can edit follows 5 Variables
+#  jp: 以下の5つの変数を必要に応じて編集します。
+HELIX_ROWS = 5              # Helix Rows is 4 or 5
+OLED_ENABLE = no            # OLED_ENABLE
+LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
+LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
+LED_ANIMATIONS = yes        # LED animations
+
+```
+## Compile
+
+go to qmk top directory.
+```
+$ cd qmk_firmware
+```
+
+build
+```
+$ make helix:default
+```
+
+flash to keyboard
+```
+$ make helix:default:avrdude
+```
+
+## Link
+* more detail wrote in Japanese [helix/Doc/firmware_jp.md](https://github.com/MakotoKurauchi/helix/blob/master/Doc/firmware_jp.md)
+* [Helix top](https://github.com/MakotoKurauchi/helix)
 
-Work in progress...

keyboards/helix/rev2/keymaps/default/readme_jp.md

@@ -0,0 +1,98 @@
+# The Default Helix Layout
+## 配列
+
+### Qwerty配列
+
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+他の配列(Colemak,Dvorak)は、[readme.md](readme.md) を参照
+
+## コンパイルの仕方
+
+コンパイルは、qmk_firmware のトップディレクトリで行います。
+
+```
+$ cd qmk_firmware
+```
+qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。
+
+```
+$ make helix:default
+```
+
+キーボードへの書き込みまで同時に行うには下記のように`:avrdude`を付けます。
+
+```
+$ make helix:default:avrdude
+```
+
+コンパイル結果と中間生成物を消去したい場合は以下のようにします。
+
+```
+$ make helix:default:clean
+```
+
+## カスタマイズ
+
+Helix キーボードを4行版として製作したり、オプションの OLED をつけたり、
+RGB バックライトまたは、RGB Underglow をつけた場合は、
+`qmk_firmware/keyboards/helix/rev2/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。
+
+```
+# Helix keyboard customize
+# you can edit follows 5 Variables
+#  jp: 以下の5つの変数を必要に応じて編集します。
+HELIX_ROWS = 5              # Helix Rows is 4 or 5
+OLED_ENABLE = no            # OLED_ENABLE
+LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
+LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
+LED_ANIMATIONS = yes        # LED animations
+
+```
+
+## 4行版Helix に対応する
+
+rules.mk の下記の部分を編集して 5 を 4 に変更してください。
+
+```
+HELIX_ROWS = 4              # Helix Rows is 4 or 5
+```
+
+## RGB バックライトを有効にする
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+
+```
+LED_BACK_ENABLE = yes        # LED backlight (Enable WS2812 RGB underlight.)
+```
+
+## RGB Underglow を有効にする
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+```
+LED_UNDERGLOW_ENABLE = yes   # LED underglow (Enable WS2812 RGB underlight.)
+```
+
+## OLEDを有効にする
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+```
+OLED_ENABLE = yes            # OLED_ENABLE
+```
+
+## リンク
+
+* さらに詳細は、[こちら helix/Doc/firmware_jp.md](https://github.com/MakotoKurauchi/helix/blob/master/Doc/firmware_jp.md)をご覧ください。
+* [Helix top](https://github.com/MakotoKurauchi/helix)

keyboards/helix/rev2/keymaps/default/rules.mk

@@ -14,14 +14,70 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-# Helix keyboard : see ./config.h: RGBLED_NUM 6 or 32
-# Helix keyboard : RGBLIGHT_ENABLE = no or yes
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 
+define HELIX_CUSTOMISE_MSG
+  $(info Helix customize)
+  $(info -  OLED_ENABLE=$(OLED_ENABLE))
+  $(info -  LED_BACK_ENABLE=$(LED_BACK_ENABLE))
+  $(info -  LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
+  $(info -  LED_ANIMATION=$(LED_ANIMATIONS))
+endef
+
+# Helix keyboard customize
+# you can edit follows 5 Variables
+#  jp: 以下の5つの変数を必要に応じて編集します。
+HELIX_ROWS = 5              # Helix Rows is 4 or 5
+OLED_ENABLE = no            # OLED_ENABLE
+LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
+LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
+LED_ANIMATIONS = yes        # LED animations
+
+####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
+####    Do not enable these with audio at the same time.
+
+# Uncomment these for checking
+#   jp: コンパイル時にカスタマイズの状態を表示したい時はコメントをはずします。
+# $(eval $(call HELIX_CUSTOMISE_MSG))
+# $(info )
+
+ifneq ($(strip $(HELIX_ROWS)), 4)
+  ifneq ($(strip $(HELIX_ROWS)), 5)
+    $(error HELIX_ROWS = $(strip $(HELIX_ROWS)) is unexpected value)
+  endif
+endif
+OPT_DEFS += -DHELIX_ROWS=$(strip $(HELIX_ROWS))
+
+ifeq ($(strip $(LED_BACK_ENABLE)), yes)
+  RGBLIGHT_ENABLE = yes
+  OPT_DEFS += -DRGBLED_BACK
+  ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
+    $(eval $(call HELIX_CUSTOMISE_MSG))
+    $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
+  endif
+else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
+  RGBLIGHT_ENABLE = yes
+else
+  RGBLIGHT_ENABLE = no
+endif
+
+ifeq ($(strip $(LED_ANIMATIONS)), yes)
+    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+endif
+
+ifeq ($(strip $(OLED_ENABLE)), yes)
+    OPT_DEFS += -DOLED_ENABLE
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
+
+# Uncomment these for debugging
+# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
+# $(info -- OPT_DEFS=$(OPT_DEFS))
+# $(info )

keyboards/hhkb/keymaps/eric/keymap.c

@@ -18,7 +18,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
      | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 |       |   |
      |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
-
             |------+------+-----------------------+------+------|
             | LAlt | LGUI | ******* Space ******* | RGUI | RAlt |
             |------+------+-----------------------+------+------|
@@ -37,13 +36,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
       | Caps  | F1  | F2  | F3  | F4 | F5 | F6 | F7 | F8  | F9  | F10 | F11 | F12   | Ins  | Del |
       |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
-      |      | PgU |  Up | PgD | Hm |  & |    |    |     |     | Psc | Up  |  Del  | Backs |     |
+      |      | PgU |  Up | PgD | Hm |  & |  ~ |    |     |     | Psc | Up  |  Del  | Backs |     |
       |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
       |      | Lef | Dow | Rig | En |  * |    |    | PgU | Hom | Lef | Rig | Enter |       |     |
       |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
-      |      |  _  |  +  |  (  |  ) |  | |  ~ |    | PgD | End | Dow |     |       |       |     |
+      |      |  _  |  +  |  (  |  ) |  | |    |    | PgD | End | Dow |     |       |       |     |
       |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
-
                  |------+------+----------------------+------+------+
                  | **** | **** | ******************** | **** | **** |
                  |------+------+----------------------+------+------+
@@ -52,9 +50,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [HHKB] = KEYMAP(
   KC_CAPS,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_INS,   KC_DEL, \
-  KC_TRNS,  KC_PGUP,  KC_UP,  KC_PGDN,  KC_HOME,  KC_AMPR,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSCR,  KC_UP,    KC_DEL,  KC_BSPC,          \
+  KC_TRNS,  KC_PGUP,  KC_UP,  KC_PGDN,  KC_HOME,  KC_AMPR,  KC_TILD,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSCR,  KC_UP,    KC_DEL,  KC_BSPC,          \
   KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_END,  KC_ASTR,  KC_TRNS,  KC_TRNS,  KC_PGUP,  KC_HOME,  KC_LEFT,  KC_RGHT,  KC_TRNS,                    \
-  KC_TRNS,  KC_UNDS,  KC_PLUS,  KC_LPRN,  KC_RPRN,  KC_PIPE,  KC_TILD,  KC_TRNS,  KC_PGDN,   KC_END,  KC_DOWN,  KC_TRNS,  KC_TRNS,                    \
+  KC_TRNS,  KC_UNDS,  KC_PLUS,  KC_LPRN,  KC_RPRN,  KC_PIPE,  KC_TRNS,  KC_TRNS,  KC_PGDN,   KC_END,  KC_DOWN,  KC_TRNS,  KC_TRNS,                    \
                      KC_TRNS, KC_TRNS,           KC_TRNS,                KC_TRNS, KC_TRNS)};
 
 

keyboards/iris/keymaps/davidrambo/keymap.c

@@ -5,12 +5,12 @@
 extern keymap_config_t keymap_config;
 
 //keycode shorthands
-#define KC____  KC_TRNS
+#define KC____  KC_TRNS // three underscores "___" for transparent
 #define KC_SYM  MO(3)
 #define KC_MAC  TO(0)
 #define KC_PC   TO(1)
 #define KC_GM   TO(2)
-#define KC_NAV  LT(4, KC_TAB)
+#define KC_NAVMAC LT(4, KC_TAB)
 #define KC_NAVPC  LT(5, KC_TAB)
 
 //text editor shortcuts for NAV and NAVPC
@@ -18,8 +18,8 @@ extern keymap_config_t keymap_config;
 #define KC_AR   LALT(KC_RGHT)
 #define KC_CL   LCTL(KC_LEFT)
 #define KC_CR   LCTL(KC_RGHT)
-#define KC_A_BS LALT(KC_BSPC)
+#define KC_ABSPC LALT(KC_BSPC)
-#define KC_C_BS LALT(KC_BSPC)
+#define KC_CBSPC LCTL(KC_BSPC)
 
 //internet browser tab shortcuts and window swapping for Mac and Windows
 #define KC_GSL  LGUI(S(KC_LEFT))
@@ -38,7 +38,7 @@ extern keymap_config_t keymap_config;
 #define _PC 1
 #define _GAME 2
 #define _SYMBOL 3
-#define _NAV 4
+#define _NAVMAC 4
 #define _NAVPC 5
 
 enum {
@@ -56,13 +56,13 @@ enum {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	[_COLEMAK] = KC_KEYMAP(
+	[_COLEMAK] = LAYOUT_kc(
   //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
      ESC , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,MINS,
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
      GRV , Q  , W  , F  , P  , G  ,                J  , L  , U  , Y  ,SCLN,BSPC,
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-     NAV , A  , R  , S  , T  , D  ,                H  , N  , E  , I  , O  ,QUOT,
+   NAVMAC, A  , R  , S  , T  , D  ,                H  , N  , E  , I  , O  ,QUOT,
   //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
      SFLK, Z  , X  , C  , V  , B  , PC ,     ENT , K  , M  ,COMM, DOT,SLSH,RSFT,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
@@ -70,7 +70,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //                  `----+----+----'        `----+----+----'
   ),
 
-    [_PC] = KC_KEYMAP(
+    [_PC] = LAYOUT_kc(
     ___ , ___ , ___ , ___ , ___ , ___ ,          ___ , ___ , ___ , ___ , ___ , ___ ,
         
     ___ , ___ , ___ , ___ , ___ , ___ ,          ___ , ___ , ___ , ___ , ___ , ___ ,
@@ -82,7 +82,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                       LGUI , LCTL , CTBS ,    ___ , ___ , ___ 
     ),
    
-    [_GAME] = KC_KEYMAP(
+    [_GAME] = LAYOUT_kc(
     ___ , ___ , ___ , ___ , ___ , ___ ,          ___ , ___ , ___ , ___ , ___ , ___ ,
         
     ___ ,  T  ,  Q  ,  W  ,  E  ,  R  ,          ___ , ___ , ___ , ___ , ___ , ___ ,
@@ -94,7 +94,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                         LALT , LALT , SPC,    BSPC, MAC, ___ 
     ), 
     
-    [_SYMBOL] = KC_KEYMAP(
+    [_SYMBOL] = LAYOUT_kc(
     
     ___ , ___ , ___ , ___ , ___ , ___ ,         ___ , ___ , ___ , ___ , ___ , ___ ,
     
@@ -104,10 +104,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         
     ___ , HOME, END , VOLD, VOLU, MPLY,___,  ___,___, MINS, ___ , ___ , ___ , ___ , 
         
-                        ___ , ___ , A_BS,      ___, ___ , ___ 
+                        ___ , ___ , ___,      ___, ___ , ___ 
     ),
    
-    [_NAV] = KC_KEYMAP(
+    [_NAVMAC] = LAYOUT_kc(
     
     ___ , ___ , ___ , ___ , ___ , ___ ,         ___ , ___ , ___ , ___ , ___ , ___ ,
         
@@ -115,12 +115,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         
     ___ , ___ , ___ , ___ , ___ , ___ ,         GSL , LEFT, DOWN, RGHT, GSR , ___ ,
         
-    ___ , ___ , ___ , ___ , ___ , ___ ,___,  ___,G_TAB, ___ , ___ , ___ , ___ , ___ , 
+    ___ , ___ , ___ , ___ , ___ , ___ ,___,  ___,G_TAB,ABSPC, ___ , ___ , ___ , ___ , 
         
                         ___ , ___ , ___ ,       ___ , ___ , ___ 
     ),
     
-    [_NAVPC] = KC_KEYMAP(
+    [_NAVPC] = LAYOUT_kc(
     
     ___ , ___ , ___ , ___ , ___ , ___ ,         ___ , ___ , ___ , ___ , ___ , ___ ,
         
@@ -128,7 +128,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         
     ___ , ___ , ___ , ___ , ___ , ___ ,         CPGU, LEFT, DOWN, RGHT, CPGD, ___ ,
         
-    ___ , ___ , ___ , ___ , ___ , ___ ,___,  ___,A_TAB, ___ , ___ , ___ , ___ , ___ , 
+    ___ , ___ , ___ , ___ , ___ , ___ ,___,  ___,A_TAB,CBSPC, ___ , ___ , ___ , ___ , 
         
                         ___ , ___ , ___ ,       ___ , ___ , ___ 
     ),

keyboards/iris/keymaps/dnrambo/keymap.c

@@ -1,158 +0,0 @@
-#include "iris.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-//keycode shorthands
-#define KC____  KC_TRNS
-#define KC_SYM  MO(3)
-#define KC_MAC  TO(0)
-#define KC_PC   TO(1)
-#define KC_GM   TO(2)
-#define KC_NAV  LT(4, KC_TAB)
-#define KC_NAVPC  LT(5, KC_TAB)
-
-//text editor shortcuts for NAV and NAVPC
-#define KC_AL   LALT(KC_LEFT)
-#define KC_AR   LALT(KC_RGHT)
-#define KC_CL   LCTL(KC_LEFT)
-#define KC_CR   LCTL(KC_RGHT)
-#define KC_A_BS LALT(KC_BSPC)
-#define KC_C_BS LALT(KC_BSPC)
-
-//internet browser tab shortcuts and window swapping for Mac and Windows
-#define KC_GSL  LGUI(S(KC_LEFT))
-#define KC_GSR  LGUI(S(KC_RGHT))
-#define KC_CPGD LCTL(KC_PGDN)
-#define KC_CPGU LCTL(KC_PGUP)
-
-#define KC_CMBS  GUI_T(KC_BSPC)
-#define KC_CTBS  CTL_T(KC_BSPC)
-#define KC_C_TAB LCTL(KC_TAB)
-#define KC_G_TAB LGUI(KC_TAB)
-#define KC_A_TAB LALT(KC_TAB)
-
-//layer shorthands
-#define _COLEMAK 0
-#define _PC 1
-#define _GAME 2
-#define _SYMBOL 3
-#define _NAV 4
-#define _NAVPC 5
-
-enum {
-//	SFT_LCK //tapdance declarations
-    COLEMAK = 0,
-    PC,
-    GAME,
-    SYMBOL,
-    NAV, //Navigation layer for Mac Colemak
-    NAVPC, //Navigation layer for PC Colemak
-    SFT_LCK //tapdance declaration
-};
-
-#define KC_SFLK TD(SFT_LCK)     // alias for tapdance
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	[_COLEMAK] = KC_KEYMAP(
-  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
-     ESC , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,MINS,
-  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-     GRV , Q  , W  , F  , P  , G  ,                J  , L  , U  , Y  ,SCLN,BSPC,
-  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-     NAV , A  , R  , S  , T  , D  ,                H  , N  , E  , I  , O  ,QUOT,
-  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-     SFLK, Z  , X  , C  , V  , B  , PC ,     ENT , K  , M  ,COMM, DOT,SLSH,RSFT,
-  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                       LCTL,LGUI,CMBS,         SPC, SYM, LALT
-  //                  `----+----+----'        `----+----+----'
-  ),
-
-    [_PC] = KC_KEYMAP(
-    ___ , ___ , ___ , ___ , ___ , ___ ,          ___ , ___ , ___ , ___ , ___ , ___ ,
-        
-    ___ , ___ , ___ , ___ , ___ , ___ ,          ___ , ___ , ___ , ___ , ___ , ___ ,
-        
-    NAVPC,___ , ___ , ___ , ___ , ___ ,          ___ , ___ , ___ , ___ , ___ , ___ ,
-        
-    ___ , ___ , ___ , ___ , ___ , ___ , GM, ___, ___ , ___ , ___ , ___ , ___ , ___ , 
-        
-                      LGUI , LCTL , CTBS ,    ___ , ___ , ___ 
-    ),
-   
-    [_GAME] = KC_KEYMAP(
-    ___ , ___ , ___ , ___ , ___ , ___ ,          ___ , ___ , ___ , ___ , ___ , ___ ,
-        
-    ___ ,  T  ,  Q  ,  W  ,  E  ,  R  ,          ___ , ___ , ___ , ___ , ___ , ___ ,
-        
-    TAB , LSFT,  A  ,  S  ,  D  ,  F  ,          ___ , ___ , ___ , ___ , ___ , ___ ,
-        
-     I  , LCTL,  Z  ,  X  ,  C  ,  V  ,  M,   P , ___, ___ , ___ , ___ , ___ , ___ , 
-        
-                        LALT , LALT , SPC,    BSPC, MAC, ___ 
-    ), 
-    
-    [_SYMBOL] = KC_KEYMAP(
-    
-    ___ , ___ , ___ , ___ , ___ , ___ ,         ___ , ___ , ___ , ___ , ___ , ___ ,
-    
-    LBRC,  1  ,  2  ,  3  ,  4  ,  5  ,          6  ,  7  ,  8  ,  9  ,  0  , RBRC,
-        
-    BSLS, EXLM, AT  , HASH, DLR , PERC,         CIRC, AMPR, ASTR, LPRN, RPRN, EQL ,
-        
-    ___ , HOME, END , VOLD, VOLU, MPLY,___,  ___,___, MINS, ___ , ___ , ___ , ___ , 
-        
-                        ___ , ___ , A_BS,      ___, ___ , ___ 
-    ),
-   
-    [_NAV] = KC_KEYMAP(
-    
-    ___ , ___ , ___ , ___ , ___ , ___ ,         ___ , ___ , ___ , ___ , ___ , ___ ,
-        
-    ___ , ___ , ___ , ___ , ___ , ___ ,         C_TAB, AL ,  UP ,  AR , DEL , ___ ,
-        
-    ___ , ___ , ___ , ___ , ___ , ___ ,         GSL , LEFT, DOWN, RGHT, GSR , ___ ,
-        
-    ___ , ___ , ___ , ___ , ___ , ___ ,___,  ___,G_TAB, ___ , ___ , ___ , ___ , ___ , 
-        
-                        ___ , ___ , ___ ,       ___ , ___ , ___ 
-    ),
-    
-    [_NAVPC] = KC_KEYMAP(
-    
-    ___ , ___ , ___ , ___ , ___ , ___ ,         ___ , ___ , ___ , ___ , ___ , ___ ,
-        
-    ___ , ___ , ___ , ___ , ___ , ___ ,         C_TAB, CL ,  UP ,  CR , DEL , ___ ,
-        
-    ___ , ___ , ___ , ___ , ___ , ___ ,         CPGU, LEFT, DOWN, RGHT, CPGD, ___ ,
-        
-    ___ , ___ , ___ , ___ , ___ , ___ ,___,  ___,A_TAB, ___ , ___ , ___ , ___ , ___ , 
-        
-                        ___ , ___ , ___ ,       ___ , ___ , ___ 
-    ),
-   
-};
-
-// Shift vs. capslock function. From bbaserdem's Planck keymap.
-void caps_tap (qk_tap_dance_state_t *state, void *user_data) {
-    if (state->count == 1) {
-        register_code (KC_LSFT);
-    } else if (state->count == 2) {
-        unregister_code (KC_LSFT);
-        register_code (KC_CAPS);
-    }
-}
-void caps_tap_end (qk_tap_dance_state_t *state, void *user_data) {
-    if (state->count == 1) {
-        unregister_code (KC_LSFT);
-    } else {
-        unregister_code (KC_CAPS);
-    }
-}
-
-qk_tap_dance_action_t tap_dance_actions[] = {
-    //Tap once for Shift, twice for Caps Lock
-    [SFT_LCK] = ACTION_TAP_DANCE_FN_ADVANCED( caps_tap, NULL, caps_tap_end)
-};

keyboards/iris/keymaps/dnrambo/readme.md

@@ -1,3 +0,0 @@
-# Colemak layout for Iris rev2.1 with Mac and Windows layers and a Gaming Layer.
-# Symbol layer is based on my Planck layout, so it provides numbers, symbols, and volume controls.
-# Two Navigation layers, for Mac and Windows Colemak layers respectively.

keyboards/iris/keymaps/dnrambo/rules.mk

@@ -1,7 +0,0 @@
-RGBLIGHT_ENABLE = no
-BACKLIGHT_ENABLE = no
-TAP_DANCE_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/lets_split/keymaps/default/keymap.c

@@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |Adjust| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_QWERTY] = KEYMAP(
+[_QWERTY] = LAYOUT(
    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \

keyboards/lets_split/keymaps/piemod/config.h

@@ -34,4 +34,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
+// RGB Options
+#undef RGBLED_NUM
+#define RGBLED_NUM 10
+#define RGBLIGHT_SLEEP
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_EFFECT_SNAKE_LENGTH 1
+#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 1
+
+// Typing Options
+#define PREVENT_STUCK_MODIFIERS
+#define QMK_KEYS_PER_SCAN 4
+
 #endif

keyboards/lets_split/keymaps/piemod/keymap.c

@@ -10,7 +10,7 @@ extern keymap_config_t keymap_config;
 #define _NUMBER 3 // F(3)
 #define _FUNCTION 4 // F(4)
 #define _EMACS 5 // F(5)
-#define _MACROS 6 // F(6)
+#define _COMBOS 6 // F(6)
 #define _MOUSE 7 // F(7)
 
 enum custom_keycodes {
@@ -20,17 +20,17 @@ enum custom_keycodes {
   NUMBER,
   FUNCTION,
   EMACS,
-  MACROS,
+  COMBOS,
   MOUSE,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_DVORAK] = LAYOUT( \
-  KC_ESC,  KC_QUOTE,  F(7),  KC_DOT,  KC_P,  KC_Y,  KC_F,  KC_G,  KC_C,  KC_R,  KC_L,  KC_DELETE, \
+  KC_ESC,  KC_QUOTE,  LT(7, KC_COMMA),  KC_DOT,  KC_P,  KC_Y,  KC_F,  KC_G,  KC_C,  KC_R,  KC_L,  KC_DELETE, \
-  KC_TAB,  F(1),  F(2),  F(3),  F(4),  KC_I,  KC_D,  KC_H,  KC_T,  KC_N,  KC_S,  KC_ENTER, \
+  KC_TAB,  LT(1, KC_A),  LT(2, KC_O),  LT(3, KC_E),  LT(4, KC_U),  KC_I,  KC_D,  KC_H,  KC_T,  KC_N,  KC_S,  KC_ENTER, \
-  KC_LSHIFT,  KC_SCOLON,  F(5),   KC_J,   KC_K,  KC_X,   KC_B,   KC_M,   KC_W,  KC_V,  KC_Z,  KC_MINUS, \
+  KC_LSHIFT,  KC_SCOLON,  LT(5, KC_Q),   KC_J,   KC_K,  KC_X,   KC_B,   KC_M,   KC_W,  KC_V,  KC_Z,  KC_MINUS, \
-  F(10), F(6),  KC_MENU, KC_LALT,  KC_LGUI,  KC_BSPACE,  KC_SPACE,  KC_RCTRL,  KC_LEFT,  KC_DOWN,  KC_UP, KC_RIGHT \
+  F(1), LT(6, KC_LCTRL),  KC_MENU, KC_LALT,  KC_LGUI,  KC_BSPACE,  KC_SPACE,  KC_RCTRL,  KC_LEFT,  KC_DOWN,  KC_UP, KC_RIGHT \
 ),
 
 [_ARROW] = LAYOUT( \
@@ -42,7 +42,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_SYMBOL] = LAYOUT( \
   KC_TILD,  KC_GRAVE,  KC_NO,  KC_EQUAL,  KC_PLUS,  KC_NO,  KC_LBRACKET,  KC_RBRACKET,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN, \
-  KC_NO,  KC_NO,  KC_TRNS,  KC_SCOLON,  KC_COLN,  KC_NO,  KC_LCBR,  KC_RCBR,  KC_DLR,  KC_PERC,  KC_CIRC,  F(21), \
+  KC_NO,  KC_NO,  KC_TRNS,  KC_SCOLON,  KC_COLN,  KC_NO,  KC_LCBR,  KC_RCBR,  KC_DLR,  KC_PERC,  KC_CIRC,  F(2), \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_BSLASH,  KC_SLASH,  KC_EXLM,  KC_AT,  KC_HASH,  KC_PIPE, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_ASTR,   KC_SLASH,  KC_MINUS,  KC_PLUS,  KC_EQUAL \
 ),
@@ -56,9 +56,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_FUNCTION] = LAYOUT( \
   KC_PSCREEN,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6, \
-  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_TRNS,  KC_NO,  KC_F7,  KC_F8,  KC_F9,  KC_F10,  KC_F11,  KC_F12, \
+  KC_NO,  RGB_HUI,  RGB_SAI,  RGB_VAI,  KC_TRNS,  KC_NO,  KC_F7,  KC_F8,  KC_F9,  KC_F10,  KC_F11,  KC_F12, \
-  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO, KC_NO,  KC_AUDIO_MUTE,  KC_AUDIO_VOL_DOWN,  KC_AUDIO_VOL_UP,  KC_MEDIA_PLAY_PAUSE, \
+  KC_NO,  RGB_HUD,  RGB_SAD,  RGB_VAD,  KC_NO,  KC_NO,  KC_NO, KC_NO,  KC_AUDIO_MUTE,  KC_AUDIO_VOL_DOWN,  KC_AUDIO_VOL_UP,  KC_MEDIA_PLAY_PAUSE, \
-  RESET,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_DELETE,  KC_INSERT,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END \
+  RESET,  RGB_TOG,  RGB_MOD,  KC_NO,  KC_NO,  KC_NO,  KC_DELETE,  KC_INSERT,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END \
 ),
 
 [_EMACS] = LAYOUT( \
@@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO \
 ),
 
-[_MACROS] = LAYOUT( \
+[_COMBOS] = LAYOUT( \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO, \
@@ -93,29 +93,8 @@ enum function_id {
 int CAPSLOCKED = 0;
 
   const uint16_t PROGMEM fn_actions[] = {
-
-    // DVORAK 0
-    // ARROW 1, F(1)
-    // SYMBOL 2, F(2)
-    // NUMBER 3, F(3)
-    // FUNCTION 4, F(4)
-    // EMACS 5, F(5)
-    // MACROS 6, F(6)
-    // MOUSE 7, F(7)
-
-    // Layers
-    [1] =  ACTION_LAYER_TAP_KEY(1, KC_A),     // FN1 = Momentary Arrow layer on A.
-    [2] =  ACTION_LAYER_TAP_KEY(2, KC_O),     // FN2 = Momentary symbOl layer on O.
-    [3] =  ACTION_LAYER_TAP_KEY(3, KC_E),     // FN3 = Momentary numbEr layer on E.
-    [4] =  ACTION_LAYER_TAP_KEY(4, KC_U),     // FN4 = Momentary fUnction layer on U.
-    [5] =  ACTION_LAYER_TAP_KEY(5, KC_Q),     // FN5 = Momentary emaQs layer on Q.
-    [6] =  ACTION_LAYER_TAP_KEY(6, KC_LCTRL), // FN6 = Momentary MACROS on ??? key.
-    [7] =  ACTION_LAYER_TAP_KEY(7, KC_COMMA), // FN7 = Momentary MOUSE on , key.
-
     // Special Keys
-    [10] =  ACTION_MODS_KEY(KC_LCTRL, KC_LALT), // FN10 = Ctrl + Alt.
+    [1] =  ACTION_MODS_KEY(KC_LCTRL, KC_LALT), // FN10 = Ctrl + Alt.
-
     // Symbols
-    [21] =  ACTION_MODS_KEY(MOD_LSFT, KC_SLASH), // FN21 = Question mark.
+    [2] =  ACTION_MODS_KEY(MOD_LSFT, KC_SLASH), // FN21 = Question mark.
-
   };

keyboards/lets_split/keymaps/piemod/rules.mk

@@ -0,0 +1,13 @@
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 = no

keyboards/meme/config.h

@@ -0,0 +1,190 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Switchmod Keyboards
+#define PRODUCT         Meme
+#define DESCRIPTION     A custom 65% gasket mount keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C2, D0, D1, D4, D5, D6, B0, B1, B2, B3  }
+#define MATRIX_COL_PINS { D3, D2, B5, B6, C7, C6, C5, C4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif

keyboards/meme/info.json

@@ -0,0 +1,24 @@
+{
+  "keyboard_name": "Meme",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 16,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_all": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Win", "x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      },
+
+      "LAYOUT_vanilla": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Win", "x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      },
+
+      "LAYOUT_aria": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"x":11.5, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      },
+
+      "LAYOUT_true": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"x":11.5, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      }
+  }
+}

keyboards/meme/keymaps/default/config.h

@@ -1,4 +1,4 @@
-/* Copyright 2017 Benjamin Kesselring
+/* Copyright 2018 MechMerlin
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,10 +17,8 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
+#include "config_common.h"
 
-#define TAPPING_TERM 200
+// place overrides here
-#define PERMISSIVE_HOLD 
-#define PREVENT_STUCK_MODIFIERS
 
 #endif

keyboards/meme/keymaps/default/keymap.c

@@ -0,0 +1,27 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_all(\
+    KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSPC, KC_INS,
+    KC_TAB,  KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+    KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP,
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+    KC_LCTL, KC_LGUI, KC_LALT,       KC_SPACE,         KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT
+  )
+};

keyboards/meme/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Meme

keyboards/meme/meme.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "meme.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/meme/meme.h

@@ -0,0 +1,102 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef MEME_H
+#define MEME_H
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36,      K37, \
+    K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55,      K56,      K57, \
+    K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65,           K76, K67, K77, \
+    K80, K90, K81,           K92,                     K85, K95, K86, K96, K87, K97 \
+)\
+{\
+  {K00, K01,   K02,   K03,   K04,   K05,   K06,   K07}, \
+  {K10, K11,   K12,   K13,   K14,   K15,   K16,   K17}, \
+  {K20, K21,   K22,   K23,   K24,   K25,   K26,   KC_NO}, \
+  {K30, K31,   K32,   K33,   K34,   K35,   K36,   K37}, \
+  {K40, K41,   K42,   K43,   K44,   K45,   KC_NO, KC_NO}, \
+  {K50, K51,   K52,   K53,   K54,   K55,   K56,   K57}, \
+  {K60, K61,   K62,   K63,   K64,   K65,   KC_NO, K67}, \
+  {K70, K71,   K72,   K73,   K74,   KC_NO, K76,   K77}, \
+  {K80, K81,   KC_NO, KC_NO, KC_NO, K85,   K86,   K87}, \
+  {K90, KC_NO, K92,   KC_NO, KC_NO, K95,   K96,   K97}, \
+}
+
+#define LAYOUT_vanilla( \
+    K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06,      K07, K17, \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36,      K37, \
+    K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55,      K56,      K57, \
+    K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65,           K76, K67, K77, \
+    K80, K90, K81,           K92,                     K85, K95, K86, K96, K87, K97 \
+)\
+{\
+  {K00, K01,   K02,   K03,   K04,   K05,   K06,   K07}, \
+  {K10, K11,   K12,   K13,   K14,   K15,   KC_NO, K17}, \
+  {K20, K21,   K22,   K23,   K24,   K25,   K26,   KC_NO}, \
+  {K30, K31,   K32,   K33,   K34,   K35,   K36,   K37}, \
+  {K40, K41,   K42,   K43,   K44,   K45,   KC_NO, KC_NO}, \
+  {K50, K51,   K52,   K53,   K54,   K55,   K56,   K57}, \
+  {K60, K61,   K62,   K63,   K64,   K65,   KC_NO, K67}, \
+  {K70, K71,   K72,   K73,   K74,   KC_NO, K76,   K77}, \
+  {K80, K81,   KC_NO, KC_NO, KC_NO, K85,   K86,   K87}, \
+  {K90, KC_NO, K92,   KC_NO, KC_NO, K95,   K96,   K97}, \
+}
+
+#define LAYOUT_aria( \
+    K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06,      K07, K17, \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36,      K37, \
+    K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55,      K56,      K57, \
+    K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65,           K76, K67, K77, \
+    K80, K90, K81,           K92,                     K85,      K86, K96, K87, K97 \
+)\
+{\
+  {K00, K01,   K02,   K03,   K04,   K05,   K06,   K07}, \
+  {K10, K11,   K12,   K13,   K14,   K15,   KC_NO, K17}, \
+  {K20, K21,   K22,   K23,   K24,   K25,   K26,   KC_NO}, \
+  {K30, K31,   K32,   K33,   K34,   K35,   K36,   K37}, \
+  {K40, K41,   K42,   K43,   K44,   K45,   KC_NO, KC_NO}, \
+  {K50, K51,   K52,   K53,   K54,   K55,   K56,   K57}, \
+  {K60, K61,   K62,   K63,   K64,   K65,   KC_NO, K67}, \
+  {K70, K71,   K72,   K73,   K74,   KC_NO, K76,   K77}, \
+  {K80, K81,   KC_NO, KC_NO, KC_NO, K85,   K86,   K87}, \
+  {K90, KC_NO, K92,   KC_NO, KC_NO, KC_NO, K96,   K97}, \
+}
+
+#define LAYOUT_true( \
+    K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36,      K37, \
+    K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55,      K56,      K57, \
+    K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65,           K76, K67, K77, \
+    K80, K90, K81,           K92,                     K85,      K86, K96, K87, K97 \
+)\
+{\
+  {K00, K01,   K02,   K03,   K04,   K05,   K06,   K07}, \
+  {K10, K11,   K12,   K13,   K14,   K15,   K16,   K17}, \
+  {K20, K21,   K22,   K23,   K24,   K25,   K26,   KC_NO}, \
+  {K30, K31,   K32,   K33,   K34,   K35,   K36,   K37}, \
+  {K40, K41,   K42,   K43,   K44,   K45,   KC_NO, KC_NO}, \
+  {K50, K51,   K52,   K53,   K54,   K55,   K56,   K57}, \
+  {K60, K61,   K62,   K63,   K64,   K65,   KC_NO, K67}, \
+  {K70, K71,   K72,   K73,   K74,   KC_NO, K76,   K77}, \
+  {K80, K81,   KC_NO, KC_NO, KC_NO, K85,   K86,   K87}, \
+  {K90, KC_NO, K92,   KC_NO, KC_NO, KC_NO, K96,   K97}, \
+}
+
+
+#endif

keyboards/meme/readme.md

@@ -0,0 +1,15 @@
+# Meme
+
+![meme](imgur.com image replace me!)
+
+65% gasket mount keyboard.   
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)   
+Hardware Supported: Meme   
+Hardware Availability: [Switchmod Keyboards](http://www.switchmod.net/)   
+
+Make example for this keyboard (after setting up your build environment):
+
+    make meme:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/meme/rules.mk

@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/mf68/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "MF68",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 17.25,
+  "height": 5,
+  "layouts": {
+      "LAYOUT": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
+      }
+  }
+}

keyboards/mf68/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "mf68.h"
+#include QMK_KEYBOARD_H
 
 #define _QWERTY 0
 #define _FN1 1
@@ -9,7 +9,7 @@
 #define KC_X2 BL_STEP
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = KC_KEYMAP(
+  [_QWERTY] = LAYOUT_kc(
  /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
     ESC , 1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,MINS,EQL ,  BSPC  ,   INS ,PGUP,
  /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------|  |----`----| */
@@ -23,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /*`-----+-----+-----+------------------------------+------+-----+-----'   `----+----+----' */
   ),
 
-  [_FN1] = KC_KEYMAP(
+  [_FN1] = LAYOUT_kc(
  /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
     GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,   VOLU,HOME,
  /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--|  |ins-`pgup| */
@@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-'   `left+down+rght' */
   ),
 
-  [_FN2] = KC_KEYMAP(
+  [_FN2] = LAYOUT_kc(
  /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
     GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,   VOLU,HOME,
  /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--|  |ins-`pgup| */

keyboards/mf68/keymaps/factory/keymap.c

@@ -1,4 +1,4 @@
-#include "mf68.h"
+#include QMK_KEYBOARD_H
 
 #define _QWERTY 0
 #define _FN1 1
@@ -15,7 +15,7 @@
 
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = KC_KEYMAP(
+  [_QWERTY] = LAYOUT_kc(
  /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
     ESC , 1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,MINS,EQL ,  BSPC  ,   INS ,PGUP,
  /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------|  |----`----| */
@@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /*`-----+-----+-----+------------------------------+------+-----+-----'   `----+----+----' */
   ),
 
-  [_FN1] = KC_KEYMAP(
+  [_FN1] = LAYOUT_kc(
  /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
     GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,       ,HOME,
  /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--|  |ins-`pgup| */
@@ -39,11 +39,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-|  ,----. */
              ,    ,MPLY,MSTP,MPRV,MNXT,VOLD,VOLU,MUTE,    ,END ,             ,    X5 ,
  /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
-         ,     ,     ,                              ,      ,     ,     ,     X3 , X6 , X4 
+         ,     ,     ,                              ,      ,     ,     ,     X3 , X6 , X4
  /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-'   `left+down+rght' */
   ),
 
-  [_FN2] = KC_KEYMAP(
+  [_FN2] = LAYOUT_kc(
  /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------.  ,----+----. */
     GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,   VOLU,HOME,
  /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--|  |ins-`pgup| */

keyboards/mf68/mf68.h

@@ -3,7 +3,7 @@
 
 #include "quantum.h"
 
-#define KEYMAP( \
+#define LAYOUT( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14,     K15, K16, \
     K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32,     K33, K34, \
     K35,  K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47,     K48, \
@@ -20,13 +20,13 @@
     { K70, K71, K72, K73, K74 } \
 }
 
-#define KC_KEYMAP( \
+#define LAYOUT_kc( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14,     K15, K16, \
     K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32,     K33, K34, \
     K35,  K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47,     K48, \
     K50,   K51, K52, K53, K54, K55, K56, K57, K58, K60, K61,    K62,          K63, \
     K64,  K65,  K66,                 K67,              K68,  K70,  K71,  K72, K73, K74 \
-) KEYMAP( \
+) LAYOUT( \
     KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, \
     KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, \
     KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, \

keyboards/mf68_ble/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "MF68 BLE",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 17.25,
+  "height": 5,
+  "layouts": {
+      "LAYOUT": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
+      }
+  }
+}

keyboards/mf68_ble/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "mf68_ble.h"
+#include QMK_KEYBOARD_H
 
 #define _QWERTY 0
 #define _FN1 1

keyboards/nyquist/keymaps/danielhklein/config.h

@@ -19,6 +19,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAPPING_TERM 150 
 #define USE_SERIAL
 #define EE_HANDS
+#define BOOTMAGIC_KEY_SALT KC_ENT
+
 
 #ifdef SUBPROJECT_rev1
     #include "../../rev1/config.h"

keyboards/nyquist/keymaps/danielhklein/keymap.c

@@ -7,32 +7,41 @@
  Major changes made:
   - DVORAK, COLEMAK, FUNCTION, MOUSE, and ADJUST layers have been removed
   - right 2u key performs backspace, not enter
-  - no right ctrl key
-  - direction keys added to bottom row
   - LOWER layer controls function keys, media controls, and underglow
+  - ARROW layer uses JKLI for arrow keys
+  - Bootmagic enabled and bootmagic initialization key changed from space to enter
 */
+
 extern keymap_config_t keymap_config;
 
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
 enum custom_layers {
   _QWERTY,
   _LOWER,
-  _RAISE
+  _RAISE,
+  _ARROW
 };
 
 enum custom_keycodes {
   QWERTY = SAFE_RANGE,
   LOWER,
-  RAISE
+  RAISE,
+  ARROW
 };
 
   // Enable these functions using FUNC(n) macro.
   const uint16_t PROGMEM fn_actions[] = { //ACTION_LAYER_TAP_TOGGLE requires that number of taps be defined in *config.h* - default set to 5
-      [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),    //Hold for momentary Lower layer, Tap for Space,
+      [0] = LT(_LOWER, KC_SPC),    //Hold for momentary Lower layer, Tap for Backspace, 
-      [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_BSPC)     //Hold for momentary Raise layer, Tap for Backspace,
+      [1] = LT(_RAISE, KC_BSPC),     //Hold for momentary Raise layer, Tap for Space,
+      [2] = MO(_ARROW), //Hold for momentary Arrow
    };
 
 #define SPC_LWR FUNC(0)
 #define BSP_RSE FUNC(1)
+#define ARW FUNC(2)
 
 // Fillers to make layering more clear
 #define _______ KC_TRNS
@@ -44,48 +53,48 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-/* QWERTY
+/* QWERTY 
  * .----------------------------------------.     .-----------------------------------------.
- * | Esc |   1  |   2  |   3  |   4  |   5  |     |   6  |   7  |   8  |   9  |   0  |  [   |
+ * | Esc |   1  |   2  |   3  |   4  |   5  |     |   6  |   7  |   8  |   9  |   0  |  -   |
  * |-----+------+------+------+------+------|     |------+------+------+------+------+------|
- * | Tab |   Q  |   W  |   E  |   R  |   T  |     |   Y  |   U  |   I  |   O  |   P  |  ]   |
+ * | Tab |   Q  |   W  |   E  |   R  |   T  |     |   Y  |   U  |   I  |   O  |   P  |Enter |
  * |-----+------+------+------+------+------|     |------+------+------+------+------+------|
  * | Caps|   A  |   S  |   D  |   F  |   G  |     |   H  |   J  |   K  |   L  |   ;  |  "   |
  * |-----+------+------+------+------+------|     |------+------+------+------+------+------|
- * |Lshft|   Z  |   X  |   C  |   V  |   B  |     |   N  |   M  |   ,  |   .  |  /   |Enter |
+ * |Lshft|   Z  |   X  |   C  |   V  |   B  |     |   N  |   M  |   ,  |   .  |  /   |Rshft |
  * |-----+------+------+------+------+------|     |------+------+------+------+------+------|
- * |     | Ctrl | LAlt | LGui |  Bspc/Raise |     |   Spc/Lower | Left | Down |  Up  |Right |
+ * |Arrow| LCtrl| LAlt | LGui |  Bspc/Raise |     |   Spc/Lower | RGui | RAlt | RCtrl| Del  |
  * `----------------------------------------'     '-----------------------------------------'
  */
 
 [_QWERTY] = LAYOUT(
-  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,      KC_9,    KC_0,    KC_LBRACKET,  \
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,      KC_9,    KC_0,    KC_MINS,  
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,      KC_O,    KC_P,    KC_RBRACKET, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,      KC_O,    KC_P,    KC_ENT, 
-  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,      KC_L,    KC_SCLN, KC_QUOT, \
+  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,      KC_L,    KC_SCLN, KC_QUOT, 
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,   KC_DOT,  KC_SLSH, KC_ENT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,   KC_DOT,  KC_SLSH, KC_RSFT, 
-  XXXXXXX, KC_LCTL, KC_LALT, KC_LGUI, BSP_RSE, BSP_RSE, SPC_LWR, SPC_LWR, KC_LEFT,   KC_DOWN, KC_UP,   KC_RGHT \
+  ARW,     KC_LCTL, KC_LALT, KC_LGUI, BSP_RSE, BSP_RSE, SPC_LWR, SPC_LWR, KC_RGUI,   KC_RALT, KC_RCTL, KC_DEL 
-  ),
+  ),  
 
 /* Raise
  * ,-----------------------------------------.    .-----------------------------------------.
- * |      |      |      |      |      |      |    |   =  |   /  |   *  |   -  |   \  | Del  |
+ * |      |      |      |      |      |      |    |   =  |   /  |   *  |   -  |   \  |   `  |
  * |------+------+------+------+------+------|    |------+------+------+------+------+------|
- * |      |      |      |      |      |      |    |   7  |   8  |   9  |   +  |   `  |      |
+ * |      |      |      |      |      |      |    |   7  |   8  |   9  |   +  |   [  |   ]  |
  * |------+------+------+------+------+------|    |------+------+------+------+------+------|
  * |      |      |      |      |      |      |    |   4  |   5  |   6  | Enter|      |      |
  * |------+------+------+------+------+------|    |------+------+------+------+------+------|
  * | Lshft|      |      |      |      |      |    |   1  |   2  |   3  | Space|      |      |
  * |------+------+------+------+------+------|    |------+------+------+------+------+------|
- * |      |      |      |      |  Bspc/Raise |    |      0      |   .  | Bspc |      |      |
+ * |      |      |      | LGui |             |    |      0      |   .  | Bspc |      |      |
  * `-----------------------------------------'    `-----------------------------------------'
  */
 
-[_RAISE] = LAYOUT( \
+[_RAISE] = LAYOUT( 
-  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_PEQL, KC_PSLS, KC_PAST, KC_MINS,  KC_BSLS, KC_DEL, \
+  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_PEQL, KC_PSLS, KC_PAST, KC_MINS,  KC_BSLS, KC_GRV, 
-  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_7,    KC_8,    KC_9,    KC_PPLS,  KC_GRV,  XXXXXXX,\
+  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_7,    KC_8,    KC_9,    KC_PPLS,  KC_LBRC, KC_RBRC,
-  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_4,    KC_5,    KC_6,    KC_PENT,  XXXXXXX, XXXXXXX,\
+  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_4,    KC_5,    KC_6,    KC_PENT,  XXXXXXX, XXXXXXX,
-  _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_1,    KC_2,    KC_3,    KC_SPC,   XXXXXXX, XXXXXXX,\
+  _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_1,    KC_2,    KC_3,    KC_SPC,   XXXXXXX, XXXXXXX,
-  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  KC_0,    KC_0,    KC_DOT,  KC_BSPC,  XXXXXXX, XXXXXXX \
+  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  KC_0,    KC_0,    KC_DOT,  KC_BSPC,  XXXXXXX, XXXXXXX 
 ),
 
 /* Lower
@@ -98,18 +107,40 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|    |------+------+------+------+------+------|
  * |RGB IO|RGB >>|RGB <<|Hue++ |Hue-- |      |    |      |      |      |      |      |      |
  * |------+------+------+------+------+------|    |------+------+------+------+------+------|
- * |Sat++ |Sat-- |Val++ |Val-- |             |    |   Spc/Lower |      |      |      |      |
+ * |Sat++ |Sat-- |Val++ |Val-- |             |    |             |      |      |      |      |
  * `-----------------------------------------'    `-----------------------------------------'
 */
 
-[_LOWER] = LAYOUT( \
+[_LOWER] = LAYOUT( 
-  KC_F1,    KC_F2,   KC_F3,    KC_F4,   KC_F5,   KC_F6,   XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  KC_F1,    KC_F2,   KC_F3,    KC_F4,   KC_F5,   KC_F6,   XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-  KC_F7,    KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  KC_F7,    KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-  KC_MPLY,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_MPRV, KC_MNXT, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  KC_MPLY,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_MPRV, KC_MNXT, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-  RGB_TOG,  RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  RGB_TOG,  RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-  RGB_SAI,  RGB_SAD, RGB_VAI,  RGB_VAD, XXXXXXX, XXXXXXX, _______,  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
+  RGB_SAI,  RGB_SAD, RGB_VAI,  RGB_VAD, XXXXXXX, XXXXXXX, _______,  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX 
   ),
 
+/* Arrow
+ * ,-----------------------------------------.     ,----------------------------------------.
+ * |      |      |      |      |      |      |     |     |      |      |      |      |      |
+ * |------+------+------+------+------+------|     |-----+------+------+------+------+------|
+ * |      |      |      |      |      |      |     |     |      |  Up  |      |      |      |
+ * |------+------+------+------+------+------|     |-----+------+------+------+------+------|
+ * |      |      |      |      |      |      |     |     | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|     |-----+------+------+------+------+------|
+ * |      |      |      |      |      |      |     |     |      |      |      |      |      |
+ * |------+------+------+------+------+------|     |-----+------+------+------+------+------|
+ * |      |      |      | Gui  |             |     |            |      |      |      |      |
+ * `-----------------------------------------'     `----------------------------------------'
+ */
+
+[_ARROW] = LAYOUT( 
+  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, 
+  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, KC_UP,   XXXXXXX,  XXXXXXX, XXXXXXX,
+  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT,  XXXXXXX, XXXXXXX,
+  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX,
+  _______,  XXXXXXX,  XXXXXXX,  _______,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX 
+),
+
 };
 
 void persistent_default_layer_set(uint16_t default_layer) {

keyboards/nyquist/keymaps/danielhklein/rules.mk

@@ -18,7 +18,7 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)

keyboards/nyquist/nyquist.h

@@ -4,6 +4,9 @@
 #ifdef KEYBOARD_nyquist_rev1
     #include "rev1.h"
 #endif
+#ifdef KEYBOARD_nyquist_rev2
+    #include "rev2.h"
+#endif
 
 #include "quantum.h"
 

keyboards/nyquist/rev1/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2017 Danny Nguyen <danny@hexwire.com>
+Copyright 2017 Danny Nguyen <danny@keeb.io>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1156
 #define DEVICE_VER      0x0100
 #define MANUFACTURER    Keebio

keyboards/nyquist/rev2/config.h

@@ -0,0 +1,86 @@
+/*
+Copyright 2017 Danny Nguyen <danny@keeb.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCB10
+#define PRODUCT_ID      0x1156
+#define DEVICE_VER      0x0200
+#define MANUFACTURER    Keebio
+#define PRODUCT         The Nyquist Keyboard
+#define DESCRIPTION     Split 60 percent ortholinear keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { D2, F5, F6, F7, B1, B3 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 16    // Number of LEDs
+
+/* Backlight LEDs */
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 7
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/nyquist/rev2/rev2.c

@@ -0,0 +1,21 @@
+#include "rev2.h"
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};

keyboards/nyquist/rev2/rev2.h

@@ -0,0 +1,68 @@
+#ifndef REV2_H
+#define REV2_H
+
+#include "nyquist.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
+    L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+		{ L40, L41, L42, L43, L44, L45 }, \
+		{ R05, R04, R03, R02, R01, R00 }, \
+		{ R15, R14, R13, R12, R11, R10 }, \
+		{ R25, R24, R23, R22, R21, R20 }, \
+		{ R35, R34, R33, R32, R31, R30 }, \
+		{ R45, R44, R43, R42, R41, R40 } \
+	}
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
+    L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+		{ L40, L41, L42, L43, L44, L45 }, \
+		{ R00, R01, R02, R03, R04, R05 }, \
+		{ R10, R11, R12, R13, R14, R15 }, \
+		{ R20, R21, R22, R23, R24, R25 }, \
+		{ R30, R31, R32, R33, R34, R35 }, \
+		{ R40, R41, R42, R43, R44, R45 } \
+	}
+#endif
+
+#define LAYOUT_ortho_5x12 LAYOUT
+
+#endif

keyboards/nyquist/rev2/rules.mk

@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = yes

keyboards/nyquist/rules.mk

@@ -64,7 +64,6 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SUBPROJECT_rev1 = yes
 USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/orthodox/keymaps/drashna/keymap.c

@@ -65,20 +65,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ),
 
 [_LOWER] = LAYOUT(\
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                                                  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                               KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,            KC_F11,  KC_F12,          _______, _______,          XXXXXXX, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,            KC_PGUP, KC_PGDN,         KC_HOME, KC_END,           _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
-  _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, _______, _______,         _______, _______, _______, XXXXXXX, KC_PGUP, KC_COMM, KC_DOT,  KC_PGDN, _______
+  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______,         _______, _______, _______, _______, _______, KC_COMM, KC_DOT,  _______,  _______
 ),
 
 [_RAISE] = LAYOUT(\
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                               KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                                                  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,            KC_F11,  KC_F12,          _______, KC_RCTL,          XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, _______, _______, _______, _______, _______,          KC_PGUP, KC_PGDN,         KC_HOME, KC_END,           _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-  _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, _______, _______,         _______, _______, _______, XXXXXXX, KC_HOME, KC_COMM, KC_DOT,  KC_END,  _______
+  _______, _______, _______, _______, _______, _______, _______, _______, _______,         _______, _______, _______, _______, _______, KC_COMM, KC_DOT,  _______, _______
 ),
 
 [_ADJUST] = LAYOUT(\
   KC_MAKE,KC_RESET, EPRM,    _______, _______, _______,                                                               _______, _______, _______, _______, _______, _______,
-  RGB_SMOD,RGB_HUI, KC_FXCL, AUD_ON,  AUD_OFF, AG_NORM,          _______, _______,         _______, _______,          AG_SWAP, KC_QWERTY, KC_COLEMAK, KC_DVORAK, KC_WORKMAN, TG(_MODS),
+  RGB_SMOD,RGB_HUI, CK_TOGG, AUD_ON,  AUD_OFF, AG_NORM,          _______, _______,         _______, _______,          AG_SWAP, KC_QWERTY, KC_COLEMAK, KC_DVORAK, KC_WORKMAN, TG(_MODS),
   KC_RGB_T,RGB_HUD, MU_ON,   MU_OFF,  MU_TOG,  MU_MOD,  _______, _______, _______,         _______, _______, _______, MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY
 )
 

keyboards/pearl/info.json

@@ -0,0 +1,22 @@
+{
+  "keyboard_name": "Pearl",
+  "url": "",
+  "maintainer": "qmk",
+  "bootloader": "",
+  "width": 13,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_all": {
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"{", "x":11, "y":0}, {"label":"Backspace", "x":12, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"A", "x":1.5, "y":1}, {"label":"S", "x":2.5, "y":1}, {"label":"D", "x":3.5, "y":1}, {"label":"F", "x":4.5, "y":1}, {"label":"G", "x":5.5, "y":1}, {"label":"H", "x":6.5, "y":1}, {"label":"J", "x":7.5, "y":1}, {"label":"K", "x":8.5, "y":1}, {"label":"L", "x":9.5, "y":1}, {"label":":", "x":10.5, "y":1}, {"label":"\\", "x":11.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"label":"Shift", "x":11.75, "y":2, "w":1.25}, {"label":"Alt", "x":1.13, "y":3}, {"label":"Ctrl", "x":2.13, "y":3, "w":1.25}, {"label":"Win", "x":3.375, "y":3, "w":1.25}, {"label":"Shift", "x":4.625, "y":3, "w":2.25}, {"x":6.875, "y":3, "w":1.25}, {"x":8.125, "y":3, "w":1.5}, {"label":"Menu", "x":9.625, "y":3}, {"label":"Fn", "x":10.63, "y":3, "w":1.25}]
+    },
+
+    "LAYOUT_splits": {
+      "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"{", "x":11, "y":0}, {"label":"}", "x":12, "y":0}, {"label":"Caps Lock", "x":0, "y":1, "w":1.5}, {"label":"A", "x":1.5, "y":1}, {"label":"S", "x":2.5, "y":1}, {"label":"D", "x":3.5, "y":1}, {"label":"F", "x":4.5, "y":1}, {"label":"G", "x":5.5, "y":1}, {"label":"H", "x":6.5, "y":1}, {"label":"J", "x":7.5, "y":1}, {"label":"K", "x":8.5, "y":1}, {"label":"L", "x":9.5, "y":1}, {"label":":", "x":10.5, "y":1}, {"label":"Enter", "x":11.5, "y":1, "w":1.5}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"label":"Shift", "x":11.75, "y":2, "w":1.25}, {"label":"Ctrl", "x":1, "y":3}, {"label":"Win", "x":2, "y":3, "w":1.25}, {"label":"Alt", "x":3.25, "y":3, "w":1.25}, {"x":4.5, "y":3, "w":2.25}, {"label":"Alt", "x":6.75, "y":3, "w":2.75}, {"label":"Win", "x":9.5, "y":3, "w":1.25}, {"label":"Menu", "x":10.75, "y":3}]
+    },
+
+    "LAYOUT_spacebar": {
+      "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"{", "x":11, "y":0}, {"label":"}", "x":12, "y":0}, {"label":"Caps Lock", "x":0, "y":1, "w":1.5}, {"label":"A", "x":1.5, "y":1}, {"label":"S", "x":2.5, "y":1}, {"label":"D", "x":3.5, "y":1}, {"label":"F", "x":4.5, "y":1}, {"label":"G", "x":5.5, "y":1}, {"label":"H", "x":6.5, "y":1}, {"label":"J", "x":7.5, "y":1}, {"label":"K", "x":8.5, "y":1}, {"label":"L", "x":9.5, "y":1}, {"label":":", "x":10.5, "y":1}, {"label":"Enter", "x":11.5, "y":1, "w":1.5}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"label":"Shift", "x":11.75, "y":2, "w":1.25}, {"label":"Ctrl", "x":1, "y":3}, {"label":"Win", "x":2, "y":3, "w":1.25}, {"x":3.25, "y":3, "w":6.25}, {"label":"Win", "x":9.5, "y":3, "w":1.25}, {"label":"Menu", "x":10.75, "y":3}]
+    }
+
+  }
+}

keyboards/pearl/keymaps/default/keymap.c

@@ -15,16 +15,16 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "pearl.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = KEYMAP(
+  [0] = LAYOUT_all(
       KC_GESC,               KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_BSPC,
       KC_TAB,                KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_ENT,
       MT(MOD_LSFT, KC_CAPS), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
       KC_LCTL,               KC_LALT,    KC_LGUI,    KC_LSFT,    KC_SPC,        KC_SPC, KC_APP,  MO(1)
       ),
-  [1] = KEYMAP(
+  [1] = LAYOUT_all(
       KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_EQL,  KC_SLEP,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_QUOT, KC_BSLS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS,

keyboards/pearl/keymaps/jetpacktuxedo/keymap.c

@@ -1,25 +1,25 @@
-#include "pearl.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = KEYMAP(
+  [0] = LAYOUT_all(
     KC_GESC,       KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
     LT(2, KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, LT(2,KC_ENT),
     KC_LSFT,       KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
     KC_LCTL,    KC_LGUI, KC_LALT,    KC_BSPC,    KC_NO,      LT(1, KC_SPC),    MO(3), KC_RALT
   ),
-  [1] = KEYMAP(
+  [1] = LAYOUT_all(
     KC_GRV,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,  KC_0,    KC_MINS, KC_EQL,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_QUOT, KC_TRNS,
     KC_TRNS, RGB_TOG, RGB_SMOD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
   ),
-  [2] = KEYMAP(
+  [2] = LAYOUT_all(
     KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_PLUS,
     KC_TRNS, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_DQUO, KC_TRNS,
     KC_TRNS, RGB_HUI, RGB_HUD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PIPE, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,  KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS
   ),
-  [3] = KEYMAP(
+  [3] = LAYOUT_all(
     KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS, RESET,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, BL_TOGG, KC_TRNS, BL_INC,  BL_DEC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/pearl/keymaps/phil/keymap.c

@@ -23,40 +23,40 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define _FN2 4
 #define LIGHT 5
 
-#include "pearl.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [COLEMAK] = KEYMAP(
+  [COLEMAK] = LAYOUT_all(
       KC_TAB,           KC_Q,    KC_W,    KC_F,    KC_P,   KC_G,   KC_J,   KC_L,   KC_U,    KC_Y,    KC_SCLN,  KC_NO, KC_BSPC,
       LGUI_T(KC_ESC),   KC_A,    KC_R,    KC_S,    KC_T,   KC_D,   KC_H,   KC_N,   KC_E,    KC_I,    KC_O,     KC_QUOT,
       LSFT_T(KC_DEL),   KC_Z,    KC_X,    KC_C,    KC_V,   KC_B,   KC_K,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  RSFT_T(KC_ENT),
       KC_LCTL,          KC_LGUI, KC_LALT,    LT(_FN1, KC_SPC),    KC_NO,        LT(_FN2, KC_SPC), TG(QWERTY),  TG(WIN)
       ),
-  [QWERTY] = KEYMAP(
+  [QWERTY] = LAYOUT_all(
       KC_TRNS,   KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_NO, KC_TRNS,
       KC_TRNS,   KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_TRNS,
       KC_TRNS,   KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_TRNS,
       KC_TRNS,          KC_TRNS, KC_TRNS,    KC_TRNS,    KC_NO,        KC_TRNS, KC_TRNS,  KC_TRNS
       ),
-  [WIN] = KEYMAP(
+  [WIN] = LAYOUT_all(
       KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,  KC_TRNS,
       LCTL_T(KC_ESC), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
       KC_LGUI, KC_LALT, KC_LCTL, KC_TRNS, KC_NO,  KC_TRNS,  KC_TRNS,  KC_TRNS
       ),
-  [_FN1] = KEYMAP(
+  [_FN1] = LAYOUT_all(
       KC_GRV,  KC_MNXT, KC_NO, KC_PIPE, KC_PLUS,  KC_LBRC, KC_RBRC, KC_HOME, KC_UP,   KC_END,  KC_PGUP,   KC_NO,  KC_TRNS,
       KC_TRNS, KC_MPLY, KC_SPC, KC_UNDS, KC_EQUAL, KC_LPRN, KC_RPRN, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDOWN, KC_TRNS,
       KC_TRNS, KC_MPRV, KC_NO, KC_BSLS, KC_MINUS, KC_LCBR, KC_RCBR, KC_NO,   KC_MUTE, KC_VOLU, KC_VOLD,   KC_CAPS,
       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,  KC_TRNS,  KC_TRNS,  KC_TRNS
       ),
-  [_FN2] = KEYMAP(
+  [_FN2] = LAYOUT_all(
       KC_TILD,   KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LBRC, KC_RBRC, KC_NO,  KC_TRNS,
       KC_TRNS,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_TRNS,
       KC_TRNS,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_CAPS,
       TG(LIGHT), KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,  KC_TRNS,  KC_TRNS,  KC_TRNS
       ),
-  [LIGHT] = KEYMAP(
+  [LIGHT] = LAYOUT_all(
       RESET, KC_NO,  BL_ON,   BL_INC,  BL_BRTG, RGB_M_P,  RGB_M_B, RGB_MOD,  RGB_HUI,  RGB_SAI, RGB_VAI, KC_NO,  KC_NO,
       KC_NO, KC_NO,  BL_TOGG, BL_STEP, KC_NO,   RGB_M_SN, RGB_M_K, RGB_TOG,  RGB_HUD,  RGB_SAD, RGB_VAD, KC_NO,
       KC_NO, KC_NO,  BL_OFF,  BL_DEC,  KC_NO,   KC_NO,    KC_NO,   RGB_RMOD, RGB_M_SW, RGB_M_R, RGB_M_G, KC_NO,
@@ -85,4 +85,4 @@ uint32_t layer_state_set_kb(uint32_t state) {
     PORTD |= (1 << PD6);
   }
     return state;
-}
+}

keyboards/pearl/keymaps/rask/keymap.c

@@ -1,38 +1,38 @@
-#include "pearl.h"
+#include QMK_KEYBOARD_H
 
 #define ____ KC_TRNS
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     // BASE LAYER
-    [0] = KEYMAP(
+    [0] = LAYOUT_all(
         KC_TAB,     KC_Q,       KC_W,       KC_E,       KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,       KC_O,   KC_P,       KC_LBRC,    KC_RBRC,
         MO(2),      KC_A,       KC_S,       KC_D,       KC_F,   KC_G,   KC_H,   KC_J,   KC_K,       KC_L,   KC_SCLN,                KC_ENT,
         KC_LSFT,    KC_Z,       KC_X,       KC_C,       KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,    KC_DOT, KC_SLSH,                MO(3),
                     KC_LCTL,    KC_LALT,    KC_BSPC,    MO(1),          MO(1),          KC_SPC,     KC_RALT,            KC_LGUI
     ),
     // BASE LAYER TWO (Fn1)
-    [1] = KEYMAP(
+    [1] = LAYOUT_all(
         KC_GRV,     KC_1,       KC_2,       KC_3,       KC_4,   KC_5,   KC_6,   KC_7,   KC_8,       KC_9,   KC_0,       KC_MINS,    KC_EQL,
         ____,       ____,       ____,       ____,       ____,   ____,   ____,   ____,   ____,       ____,   KC_QUOT,                KC_BSLS,
         ____,       ____,       ____,       ____,       ____,   ____,   ____,   ____,   ____,       ____,   ____,                   KC_RSFT,
                     ____,       ____,       ____,       ____,           ____,           ____,       ____,               ____
     ),
     // FROW LAYER AND ARROWS (Fn2)
-    [2] = KEYMAP(
+    [2] = LAYOUT_all(
         KC_ESC,     KC_F1,      KC_F2,      KC_F3,      KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,      KC_F9,  KC_F10,     KC_F11,     KC_F12,
         ____,       ____,       ____,       ____,       ____,   ____,   ____,   ____,   ____,       KC_UP,  ____,                   ____,
         ____,       ____,       ____,       ____,       ____,   ____,   ____,   ____,   KC_LEFT,    KC_DOWN,KC_RGHT,                MO(4),
                     ____,       ____,       ____,       ____,           ____,           ____,       ____,               ____
     ),
     // MEDIA AND RGB (Fn3)
-    [3] = KEYMAP(
+    [3] = LAYOUT_all(
         ____,       ____,       ____,       ____,       ____,   ____,   ____,   ____,   ____,       KC_MPRV,KC_MPLY,    KC_MNXT,    KC_DEL,
         ____,       ____,       ____,       RGB_HUI,    RGB_SAI,RGB_VAI,____,   ____,   ____,       ____,   ____,                   ____,
         ____,       RGB_MOD,    RGB_TOG,    RGB_HUD,    RGB_SAD,RGB_VAD,____,   ____,   ____,       ____,   ____,                   ____,
                     ____,       ____,       ____,       ____,           ____,           ____,       ____,               ____
     ),
     // UTIL (Fn1+Fn3)
-    [4] = KEYMAP(
+    [4] = LAYOUT_all(
         ____,       ____,       ____,       ____,       ____,   ____,   ____,   ____,   ____,       ____,   ____,       KC_PSCR,    ____,
         ____,       ____,       ____,       ____,       ____,   ____,   ____,   ____,   ____,       KC_PGUP,____,                   ____,
         ____,       ____,       ____,       ____,       ____,   ____,   ____,   ____,   KC_HOME,    KC_PGDN,KC_END,                 ____,

keyboards/pearl/pearl.h

@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 #include "pearl.h"
 
-#define KEYMAP( \
+#define LAYOUT_all( \
   K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,\
    K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A,  K1B, \
     K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,\
@@ -33,4 +33,29 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   { K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, KC_NO, K39, K3A, KC_NO, KC_NO}, \
 }
 
+#define LAYOUT_splits( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,\
+   K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A,  K1B, \
+    K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,\
+       K30, K31, K32,   K34,   K37,   K39, K3A\
+){ \
+  { K00, K01, K02, K03,   K04, K05, K06,   K07, K08,   K09, K0A, K0B,   K0C}, \
+  { K10, K11, K12, K13,   K14, K15, K16,   K17, K18,   K19, K1A, K1B,   KC_NO}, \
+  { K20, K21, K22, K23,   K24, K25, K26,   K27, K28,   K29, K2A, K2B,   KC_NO}, \
+  { K30, K31, K32, KC_NO, K34, KC_NO, KC_NO, K37, KC_NO, K39, K3A, KC_NO, KC_NO}, \
+}
+
+#define LAYOUT_spacebar( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,\
+   K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A,  K1B, \
+    K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,\
+           K30, K31,              K35,           K39, K3A\
+){ \
+  { K00, K01, K02,   K03,   K04, K05, K06,   K07,   K08,   K09, K0A, K0B,   K0C}, \
+  { K10, K11, K12,   K13,   K14, K15, K16,   K17,   K18,   K19, K1A, K1B,   KC_NO}, \
+  { K20, K21, K22,   K23,   K24, K25, K26,   K27,   K28,   K29, K2A, K2B,   KC_NO}, \
+  { K30, K31, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, KC_NO, K39, K3A, KC_NO, KC_NO}, \
+}
+
+
 #endif

keyboards/planck/keymaps/danielhklein/keymap.c

@@ -0,0 +1,142 @@
+#include "planck.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum custom_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ARROW
+};
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ARROW
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY 
+ * .----------------------------------------------------------------------------------.
+ * | Esc |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |Enter |
+ * |-----+------+------+------+------+------|------+------+------+------+------+------|
+ * | Tab |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |-----+------+------+------+------+------|------+------+------+------+------+------|
+ * |Lshft|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |  /   |Rshft |
+ * |-----+------+------+------+------+------|------+------+------+------+------+------|
+ * |Arrow| LCtrl| LAlt | LGui | Lower| Bspc | Space| Raise| RGui | RAlt |RCtrl |  -   |
+ * `----------------------------------------------------------------------------------'
+ */
+
+[_QWERTY] = {
+  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,      KC_O,    KC_P,    KC_ENT}, 
+  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,      KC_L,    KC_SCLN, KC_QUOT}, 
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,   KC_DOT,  KC_SLSH, KC_RSFT}, 
+  {ARROW,   KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_RGUI,   KC_RALT, KC_RCTL, KC_MINS} 
+},  
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |   7  |   8  |   9  |   /  |   \  |   `  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |   4  |   5  |   6  |   *  |   (  |   )  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Lshft|      |      |      |      |      |   1  |   2  |   3  |   -  |   [  |   ]  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      | LGui |      |      |   0  |   .  |   =  |   +  |   {  |   }  |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_LOWER] = { 
+  {XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_7,    KC_8,    KC_9,    KC_PSLS,  KC_BSLS, KC_GRV},
+  {XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_4,    KC_5,    KC_6,    KC_PAST,  KC_LPRN, KC_RPRN},
+  {_______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_1,    KC_2,    KC_3,    KC_MINS,  KC_LBRC, KC_RBRC},
+  {XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  XXXXXXX,  KC_0,    KC_DOT,  KC_PEQL, KC_PPLS,  KC_LCBR, KC_RCBR} 
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |  F7  |  F8  |  F9  | F10  | F11  | F12  |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | >/|| | Mute | Vol- | Vol+ | |<<  | >>|  |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+*/
+
+[_RAISE] = {
+  {KC_F1,    KC_F2,   KC_F3,    KC_F4,   KC_F5,   KC_F6,   XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, 
+  {KC_F7,    KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, 
+  {KC_MPLY,  KC_MUTE, KC_VOLD,  KC_VOLU, KC_MPRV, KC_MNXT, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, 
+  {XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} 
+},
+
+/* Arrow
+ * ,----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |     |      |  Up  |      |      |      |
+ * |------+------+------+------+------+------|-----+------+------+------+------+------|
+ * |      |      |      |      |      |      |     | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|-----+------+------+------+------+------|
+ * |      |      |      |      |      |      |     |      |      |      |      |      |
+ * |------+------+------+------+------+------|-----+------+------+------+------+------|
+ * |      |      |      | Gui  |      |      |     |      |      |      |      |      |
+ * `----------------------------------------------------------------------------------'
+ */
+
+[_ARROW] = {
+  {XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, KC_UP,   XXXXXXX,  XXXXXXX, XXXXXXX},
+  {XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT,  XXXXXXX, XXXXXXX},
+  {XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX},
+  {_______,  XXXXXXX,  XXXXXXX,  _______,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX} 
+},
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+      } else {
+        layer_off(_LOWER);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+      } else {
+        layer_off(_RAISE);
+      }
+      return false;
+      break;
+    case ARROW:
+        if (record->event.pressed) {
+          layer_on(_ARROW);
+        } else {
+          layer_off(_ARROW);
+        }
+        return false;
+        break;
+  }
+  return true;
+}

keyboards/planck/keymaps/danielhklein/rules.mk

@@ -0,0 +1,14 @@
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+TAP_DANCE_ENABLE = no       # Enable Tap Dance

keyboards/planck/keymaps/default/keymap.c

@@ -34,12 +34,13 @@ enum planck_keycodes {
   COLEMAK,
   DVORAK,
   PLOVER,
-  LOWER,
-  RAISE,
   BACKLIT,
   EXT_PLV
 };
 
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Qwerty
@@ -177,6 +178,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
 #endif
 
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
     case QWERTY:
@@ -198,26 +203,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
     case BACKLIT:
       if (record->event.pressed) {
         register_code(KC_RSFT);

keyboards/planck/keymaps/rambo/config.h

@@ -1,9 +0,0 @@
-#ifndef CONFIG_USER_H
-
-#define CONFIG_USER_H
-#define TAPPING_TERM 200
-#include "../../config.h"
-#define PERMISSIVE_HOLD 
-#define PREVENT_STUCK_MODIFIERS
-
-#endif

keyboards/planck/keymaps/rambo/keymap.c

@@ -1,98 +0,0 @@
-#include "planck.h"
-
-//alias for clarity in layering
-#define _______ KC_TRNS
-#define A_BSPC  LALT(KC_BSPC)
-#define A_LEFT  LALT(KC_LEFT)
-#define A_RGHT  LALT(KC_RGHT)
-#define C_TAB   LCTL(KC_TAB)
-#define GSL     LGUI(S(KC_LEFT))
-#define GSR     LGUI(S(KC_RGHT))
-#define G_TAB   LGUI(KC_TAB)
-#define G_GRV   LGUI(KC_GRV)    // MAC: switch between windows within an application
-#define SftEnt  SFT_T(KC_ENT)
-#define NAV     LT(2, KC_TAB)
-
-#define _COLEMAK 0
-#define _SYMBOL 1
-#define _NAVIGATION 2
-
-//tapdance declarations
-enum {
-  SFT_LCK
-};
-
-//alias for tapdance
-#define SftLck TD(SFT_LCK)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    
-/* Colemak
- * ,-----------------------------------------------------------------------------------.
- * | ESC` |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Tab  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |SftLck|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |  /?  |SftEnt|
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Del  | GUI  | Ctrl | Alt  | GUI  |    Space    |Symbol| Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
-*/
-    
-[_COLEMAK] = {
-  {KC_GESC, KC_Q   , KC_W   , KC_F   , KC_P   , KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
-  {NAV    , KC_A   , KC_R   , KC_S   , KC_T   , KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
-  {SftLck , KC_Z   , KC_X   , KC_C   , KC_V   , KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SftEnt },
-  {KC_DEL , KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC,  KC_SPC,  MO(1),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
-  },
-    
-/* Symbol
- * ,-----------------------------------------------------------------------------------.
- * |   [  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   ]  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |  \|  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |  =+  |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      | Home | End  | ScUp | ScDn |  F1  |  F2  |  -_  |Pg Up |      |   /  |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |  `~  |      |      |      |Alt(Bk)|            |      |Pg Dn | Vol- | Vol+ |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_SYMBOL] = {
-  {KC_LBRC, KC_1,    KC_2,    KC_3,    KC_4  , KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_RBRC},
-  {KC_BSLS, KC_EXLM, KC_AT,   KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_EQL },
-  {_______, KC_HOME, KC_END,  KC_WH_U, KC_WH_D,KC_F1  , KC_F2  , KC_MINS, KC_PGUP, _______, _______, _______},
-  {KC_GRV,  _______, _______, _______, A_BSPC, _______, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_MUTE}
-  },
-
-/* Navigation*/
-    
-[_NAVIGATION] = {
-    {_______, _______, _______, _______, _______, _______, C_TAB  , A_LEFT,  KC_UP,   A_RGHT , KC_DEL , _______},
-    {_______, _______, _______, _______, _______, _______, GSL    , KC_LEFT, KC_DOWN, KC_RGHT, GSR    , _______},
-    {_______, _______, _______, _______, _______, _______, G_TAB  , KC_HOME, _______, KC_END,  G_GRV  , _______},
-    {RESET  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
-}
-};
-
-// Shift vs capslock function. From bbaserdem's Planck keymap.
-void caps_tap (qk_tap_dance_state_t *state, void *user_data) {
-    if (state->count == 1) {
-        register_code (KC_LSFT);
-    } else if (state->count == 2) {
-        unregister_code (KC_LSFT);
-        register_code (KC_CAPS);
-    }
-}
-void caps_tap_end (qk_tap_dance_state_t *state, void *user_data) {
-    if (state->count == 1) {
-        unregister_code (KC_LSFT);
-    } else {
-        unregister_code (KC_CAPS);
-    }
-}
-
-//Tap Dance Definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
-  //Tap once for Shift, twice for Caps Lock
-  [SFT_LCK] = ACTION_TAP_DANCE_FN_ADVANCED( caps_tap, NULL, caps_tap_end )
-};

keyboards/planck/keymaps/rambo/rules.mk

@@ -1,6 +0,0 @@
-TAP_DANCE_ENABLE = yes
-MOUSEKEY_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/scrabblepad/config.h

@@ -42,8 +42,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-#define MATRIX_ROW_PINS { D3, F1, C7, F2, C6, F3, C5, F4, C4, F5, C3, F6, C2, F7, C1 }
+#define MATRIX_ROW_PINS { D5, F1, C7, F2, C6, F3, C5, F4, C4, F5, C3, F6, C2, F7, C1 }
-#define MATRIX_COL_PINS { D4, D5, D7, B7, D0, D1, D2, C0, F0, B4, B5, B6, E1, E7, E0 }
+#define MATRIX_COL_PINS { D6, D7, E0, B7, D2, D3, D4, E6, F0, B4, B5, B6, C0, E7, E1 }
 #define UNUSED_PINS
 
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
@@ -53,6 +53,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
+// ws2812 options
+//#define RGB_DI_PIN A0 // pin the DI on the ws2812 is hooked-up to
+//#define RGBLIGHT_ANIMATIONS // run RGB animations
+//#define RGBLED_NUM 6 // number of LEDs
+//#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
+//#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
+//#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
+
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5

keyboards/tada68/keymaps/fezzant/keymap.c

@@ -0,0 +1,124 @@
+#include "tada68.h"
+
+// Layers
+
+#define _BL 0
+#define _FL 1
+#define _NUM 2
+#define _BSPC 3
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Macros
+// name macros here for keymap reference
+enum {
+  EMAIL_ADD = SAFE_RANGE,
+  OTHER_MACRO
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if(record->event.pressed){
+    switch(keycode) {
+      // copy these lines to define new macro
+      case EMAIL_ADD:
+        SEND_STRING("email@example.com");
+        return false; break;
+      // copy to here
+      case OTHER_MACRO:
+        SEND_STRING("The Other Macro");
+        return false; break;
+    }
+  }
+  return true;
+};
+
+// Keymaps
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * .----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |~ ` |
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |Home|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |End |
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lft|Dwn|Rig |
+   * '----------------------------------------------------------------'
+   */
+[_BL] = KEYMAP_ANSI(
+  KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPACE, KC_GRAVE, \
+  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS,KC_DELETE, \
+  LT(_BSPC,KC_CAPS), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,KC_HOME,  \
+  KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,   KC_RSFT,KC_UP,KC_END, \
+  KC_LCTL, KC_LGUI,KC_LALT,                KC_SPC,                        KC_RALT,MO(_FL),KC_RCTRL, KC_LEFT,KC_DOWN,KC_RGHT),
+  
+
+  /* Keymap _FL: Function Layer
+   * .-----------------------------------------------------------------.
+   * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Paus |
+   * |-----------------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |BLB|BL-|BL |BL+|Foobr|ToNUM|
+   * |-----------------------------------------------------------------|
+   * |KC_NO |   |   |   |   |   |   |   |   |   |   |Mnu|        |PgUp |
+   * |-----------------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |      |   |PgDn |
+   * |-----------------------------------------------------------------|
+   * |WinUl|WinLk|   |                      |   |   |    |Nxt|Stp|Prev |
+   * '-----------------------------------------------------------------'
+   */
+[_FL] = KEYMAP_ANSI(
+  _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PAUSE ,  \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,BL_BRTG,BL_DEC,BL_TOGG, BL_INC, KC_MAIL,TG(_NUM), \
+  XXXXXXX,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_APPLICATION,        _______,KC_PGUP, \
+  _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_BTN1, KC_MS_U, KC_PGDOWN, \
+  MAGIC_UNNO_GUI,MAGIC_NO_GUI,_______,                 _______,               _______,_______,_______,KC_MPRV,KC_MSTP, KC_MNXT),
+
+
+  /* Keymap _NUM: Numpad Layer
+   * .----------------------------------------------------------------.
+   * |Esc| 1 | 2 | 3 | 4 | 5 | 6 |NP7|Np8|Np9|   | - | + |Backspc|CALC| 15
+   * |----------------------------------------------------------------|
+   * |Tab |NumL| up|   |   |   |Np4|Np5|Np6|   |   | / | * |     |    | 15
+   * |----------------------------------------------------------------|
+   * |To__BL|lft|dwn|rit|   |   |Np1|Np2|Np3|   |   |   |Enter   |Prsc| 14
+   * |----------------------------------------------------------------|
+   * |Shift   | Z | X | C | V |   |Np.|Np.|Np.|   |   |      |msU|Rclk| 14
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |            Np0       |Emal|   |Lclk|msL|msD|msR | 10
+   * '----------------------------------------------------------------'
+   */
+[_NUM] = KEYMAP_ANSI(
+  KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_P7,   KC_P8,   KC_P9,XXXXXXX,   KC_KP_MINUS, KC_KP_PLUS, KC_BSPC,KC_CALC, \
+  KC_TAB,KC_NUMLOCK, KC_UP,XXXXXXX,XXXXXXX, XXXXXXX,KC_P4,KC_P5,KC_P6,XXXXXXX,XXXXXXX,KC_PSLS,KC_PAST, XXXXXXX,_______, \
+  TG(_NUM), KC_LEFT, KC_DOWN, KC_RIGHT,XXXXXXX,XXXXXXX,KC_P1,KC_P2,KC_P3,XXXXXXX,XXXXXXX,XXXXXXX, KC_KP_ENTER,KC_PSCREEN, \
+  KC_LSFT, KC_Z, KC_X, KC_C, KC_V,XXXXXXX, KC_PDOT, KC_PDOT, KC_PDOT,XXXXXXX,XXXXXXX,XXXXXXX, KC_MS_U, KC_BTN2, \
+  KC_LCTL, KC_LGUI, KC_LALT,KC_P0,EMAIL_ADD,_______,KC_BTN1,KC_MS_L,KC_MS_D, KC_MS_R),
+
+
+  /* Keymap _BSPC: back_SPACE Layer
+   * .----------------------------------------------------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |    |
+   * |----------------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |Up |   |   |   |   |     |    |
+   * |----------------------------------------------------------------|
+   * |      |   |   |   |   |   |   |Lft|Dwn|Rig|End|   |        |    |
+   * |----------------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |      |   |    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |       Backspace         |   |NO |   |   |   |   |
+   * '----------------------------------------------------------------'
+   */
+[_BSPC] = KEYMAP_ANSI(
+  _______, _______ ,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  \
+  _______,_______,_______,_______,_______,_______,_______,_______,KC_UP,_______,_______,_______, _______, _______,_______, \
+  _______,_______,_______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_RIGHT,KC_END,_______,        _______,_______, \
+  _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, _______, _______, \
+  _______,_______,_______,                 KC_BSPACE,               _______,XXXXXXX,_______,_______,_______, _______)
+
+
+};

keyboards/tada68/keymaps/fezzant/readme.md

@@ -0,0 +1,8 @@
+## Fezzant's Tada68 keymap
+
+Includes easy copy-paste macro creation for strings or combo keypresses.
+
+* Layer 0: Mostly-standard base layer, with home/end replacing pgup/pgdn.
+* Layer 1: Momentary function layer, with some added buttons.
+* Layer 2: Toggle numpad layer, with a layout conducive to spreadsheets and calculations
+* Layer 3: Momentary function layer to put backspace on spacebar, with arrow keys on right hand homerow area.

keyboards/tada68/keymaps/fezzant/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes        # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/ut47/LED_controls.ino

@@ -0,0 +1,420 @@
+#include <FastGPIO.h>
+#include <TimerOne.h>
+
+int iByte;
+byte col = 0;
+byte leds[12][4];
+byte pass = 1;
+int fadecount = 1;
+const int fadelimit = 3000;
+const int fadelimitshort = 1000;
+byte mode = 4;
+byte brightness = 2;
+boolean changemode = 0;
+int rain = 0;
+const int rainlimit = 5000;
+const int rainfade = 5000;
+byte rx = 0;
+byte ry = 0;
+
+// pin[xx] on led matrix connected to nn on Arduino (-1 is dummy to make array start at pos 1)
+int pins[17] = {
+  -1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16, 14, 15, 18, 19, 20, 21
+};
+
+// col[xx] of leds = pin yy on led matrix
+int cols[12] = {
+  pins[8], pins[7], pins[6], pins[5], pins[9], pins[10], pins[11], pins[12], pins[13], pins[14], pins[15], pins[16]
+};
+
+// row[xx] of leds = pin yy on led matrix
+int rows[4] = {
+  pins[1], pins[2], pins[3], pins[4]
+};
+
+
+#define DELAY 0
+extern byte leds[12][4];
+
+void setup() {
+  Serial1.begin(9600);
+  setupLeds();
+  for (int s = 0; s < 5; s++) {
+    for ( int r = 1; r  < 9; r++)  {
+      delayMicroseconds(65000);
+      delayMicroseconds(65000);
+      for (int j = 0; j < 4; j++) {
+        for (int i = 0; i < 12; i++) {
+          leds[i][j] = 1;
+          for (int p = 0; p < 25; p++) {
+          }
+          leds[i][j] = r;
+        }
+      }
+    }
+    for ( int r = 9; r  > 0; r--)  {
+      delayMicroseconds(65000);
+      delayMicroseconds(65000);
+      delayMicroseconds(65000);
+      for (int j = 0; j < 4; j++) {
+        for (int i = 0; i < 12; i++) {
+          leds[i][j] = 1;
+          for (int p = 0; p < 25; p++) {
+          }
+          leds[i][j] = r;
+        }
+      }
+    }
+  }
+}
+
+void loop() {
+
+  switch (mode) {
+    case 0:
+      //Blacklight
+      for (int i = 0; i < 12; i++) {
+        for (int j = 0; j < 4; j++) {
+          leds[i][j] = brightness;
+        }
+      }
+      checkserial();
+      break;
+    case 1:
+      //Breathing
+      for ( int r = 1; r  < 9; r++)  {
+        checkserial();
+        if (changemode == 0) {
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          for (int j = 0; j < 4; j++) {
+            for (int i = 0; i < 12; i++) {
+              leds[i][j] = 1;
+              for (int p = 0; p < 25; p++) {
+              }
+              leds[i][j] = r;
+            }
+          }
+        }
+        else {
+          break;
+        }
+      }
+      for ( int r = 9; r  > 0; r--)  {
+        checkserial();
+        if (changemode == 0) {
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          for (int j = 0; j < 4; j++) {
+            for (int i = 0; i < 12; i++) {
+              leds[i][j] = 1;
+              for (int p = 0; p < 25; p++) {
+              }
+              leds[i][j] = r;
+            }
+          }
+        }
+        else {
+          break;
+        }
+      }
+      for ( int r = 1; r  < 30; r++)  {
+        checkserial();
+        if (changemode == 0) {
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+        }
+        else {
+          break;
+        }
+      }
+      break;
+    case 2:
+      //Random
+      leds[random(12)][random(4)] = random(8);
+      delayMicroseconds(10000);
+      checkserial();
+      break;
+    case 3:
+      //Rain
+      rain++;
+      if (rain > rainlimit) {
+        rain = 0;
+        rx = random(12);
+        ry = random(4);
+        if (leds[rx][ry] == 0) {
+          leds[rx][ry] = 18;
+        }
+      }
+      fadecount++;
+      if (fadecount > rainfade) {
+        fadecount = 1;
+        for (int i = 0; i < 12; i++) {
+          for (int j = 0; j < 4; j++) {
+            if (leds[i][j] > 0) {
+              leds[i][j] = leds[i][j] - 1;
+            }
+          }
+        }
+      }
+      checkserial();
+      break;
+    case 4:
+      //Reactive
+      fadecount++;
+      if (fadecount > fadelimit) {
+        fadecount = 1;
+        for (int i = 0; i < 12; i++) {
+          for (int j = 0; j < 4; j++) {
+            if (leds[i][j] > 0) {
+              leds[i][j] = leds[i][j] - 1;
+            }
+          }
+        }
+      }
+      checkserial();
+      break;
+    case 5:
+      //Reactive Target
+      fadecount++;
+      if (fadecount > fadelimitshort) {
+        fadecount = 1;
+        for (int i = 0; i < 12; i++) {
+          for (int j = 0; j < 4; j++) {
+            if (leds[i][j] > 0) {
+              leds[i][j] = leds[i][j] - 1;
+            }
+          }
+        }
+      }
+      checkserial();
+      break;
+    default:
+      mode = 0;
+      break;
+  }
+  changemode = 0;
+}
+
+void checkserial() {
+  if (Serial1.available() > 0) {
+    iByte = Serial1.read();
+    if (iByte == 100) {
+      brightness++;
+      if (brightness > 9) {
+        brightness = 1;
+      }
+    }
+    if (iByte == 101) {
+      mode++;
+    }
+    if (iByte < 100) {
+      if (mode == 4) {
+        byte row = iByte / 16;
+        byte col = iByte % 16;
+        leds[col][row] = 18;
+      }
+      if (mode == 5) {
+        byte row = iByte / 16;
+        byte col = iByte % 16;
+        for (byte i = 0; i < 12;  i++) {
+          leds[i][row] = 18;
+        }
+        for (byte p = 0; p < 4;  p++) {
+          leds[col][p] = 18;
+        }
+      }
+    }
+  }
+}
+
+void setupLeds() {
+  // sets the pins as output
+  FastGPIO::Pin<2>::setOutputLow();
+  FastGPIO::Pin<3>::setOutputLow();
+  FastGPIO::Pin<4>::setOutputLow();
+  FastGPIO::Pin<5>::setOutputLow();
+  FastGPIO::Pin<6>::setOutputLow();
+  FastGPIO::Pin<7>::setOutputLow();
+  FastGPIO::Pin<8>::setOutputLow();
+  FastGPIO::Pin<9>::setOutputLow();
+  FastGPIO::Pin<10>::setOutputLow();
+  FastGPIO::Pin<16>::setOutputLow();
+  FastGPIO::Pin<14>::setOutputLow();
+  FastGPIO::Pin<15>::setOutputLow();
+  FastGPIO::Pin<18>::setOutputLow();
+  FastGPIO::Pin<19>::setOutputLow();
+  FastGPIO::Pin<20>::setOutputLow();
+  FastGPIO::Pin<21>::setOutputLow();
+
+  // set up Cols
+  FastGPIO::Pin<6>::setOutputValueLow();
+  FastGPIO::Pin<7>::setOutputValueLow();
+  FastGPIO::Pin<8>::setOutputValueLow();
+  FastGPIO::Pin<9>::setOutputValueLow();
+  FastGPIO::Pin<10>::setOutputValueLow();
+  FastGPIO::Pin<16>::setOutputValueLow();
+  FastGPIO::Pin<14>::setOutputValueLow();
+  FastGPIO::Pin<15>::setOutputValueLow();
+  FastGPIO::Pin<18>::setOutputValueLow();
+  FastGPIO::Pin<19>::setOutputValueLow();
+  FastGPIO::Pin<20>::setOutputValueLow();
+  FastGPIO::Pin<21>::setOutputValueLow();
+
+  // set up Rows
+  FastGPIO::Pin<2>::setOutputValueLow();
+  FastGPIO::Pin<3>::setOutputValueLow();
+  FastGPIO::Pin<4>::setOutputValueLow();
+  FastGPIO::Pin<5>::setOutputValueLow();
+
+  clearLeds();
+  Timer1.initialize(25);
+  Timer1.attachInterrupt(display);
+
+}
+
+void clearLeds() {
+  // Clear display array
+  for (int i = 0; i < 12; i++) {
+    for (int j = 0; j < 4; j++) {
+      leds[i][j] = 0;
+    }
+  }
+}
+
+void onLeds() {
+  // Clear display array
+  for (int i = 0; i < 12; i++) {
+    for (int j = 0; j < 4; j++) {
+      leds[i][j] = 7;
+    }
+  }
+}
+
+// Interrupt routine
+void display() {
+
+  switch (col) { // Turn whole previous column off
+    case 0:
+      FastGPIO::Pin<6>::setOutputValueLow();
+      break;
+    case 1:
+      FastGPIO::Pin<7>::setOutputValueLow();
+      break;
+    case 2:
+      FastGPIO::Pin<8>::setOutputValueLow();
+      break;
+    case 3:
+      FastGPIO::Pin<9>::setOutputValueLow();
+      break;
+    case 4:
+      FastGPIO::Pin<10>::setOutputValueLow();
+      break;
+    case 5:
+      FastGPIO::Pin<16>::setOutputValueLow();
+      break;
+    case 6:
+      FastGPIO::Pin<14>::setOutputValueLow();
+      break;
+    case 7:
+      FastGPIO::Pin<15>::setOutputValueLow();
+      break;
+    case 8:
+      FastGPIO::Pin<18>::setOutputValueLow();
+      break;
+    case 9:
+      FastGPIO::Pin<19>::setOutputValueLow();
+      break;
+    case 10:
+      FastGPIO::Pin<20>::setOutputValueLow();
+      break;
+    case 11:
+      FastGPIO::Pin<21>::setOutputValueLow();
+      break;
+  }
+
+  col++;
+  if (col == 12) {
+    col = 0;
+    pass++;
+    if (pass > 8) {
+      pass = 1;
+    }
+  }
+  for (int row = 0; row < 4; row++) {
+    if (leds[col][row] > pass) {
+      switch (row) { // Turn on this led
+        case 0:
+          FastGPIO::Pin<2>::setOutputValueLow();
+          break;
+        case 1:
+          FastGPIO::Pin<3>::setOutputValueLow();
+          break;
+        case 2:
+          FastGPIO::Pin<4>::setOutputValueLow();
+          break;
+        case 3:
+          FastGPIO::Pin<5>::setOutputValueLow();
+          break;
+      }
+    }
+    else {
+      switch (row) { // Turn off this led
+        case 0:
+          FastGPIO::Pin<2>::setOutputValueHigh();
+          break;
+        case 1:
+          FastGPIO::Pin<3>::setOutputValueHigh();
+          break;
+        case 2:
+          FastGPIO::Pin<4>::setOutputValueHigh();
+          break;
+        case 3:
+          FastGPIO::Pin<5>::setOutputValueHigh();
+          break;
+      }
+    }
+  }
+  switch (col) { // Turn column on
+    case 0:
+      FastGPIO::Pin<6>::setOutputValueHigh();
+      break;
+    case 1:
+      FastGPIO::Pin<7>::setOutputValueHigh();
+      break;
+    case 2:
+      FastGPIO::Pin<8>::setOutputValueHigh();
+      break;
+    case 3:
+      FastGPIO::Pin<9>::setOutputValueHigh();
+      break;
+    case 4:
+      FastGPIO::Pin<10>::setOutputValueHigh();
+      break;
+    case 5:
+      FastGPIO::Pin<16>::setOutputValueHigh();
+      break;
+    case 6:
+      FastGPIO::Pin<14>::setOutputValueHigh();
+      break;
+    case 7:
+      FastGPIO::Pin<15>::setOutputValueHigh();
+      break;
+    case 8:
+      FastGPIO::Pin<18>::setOutputValueHigh();
+      break;
+    case 9:
+      FastGPIO::Pin<19>::setOutputValueHigh();
+      break;
+    case 10:
+      FastGPIO::Pin<20>::setOutputValueHigh();
+      break;
+    case 11:
+      FastGPIO::Pin<21>::setOutputValueHigh();
+      break;
+  }
+
+}

keyboards/ut47/config.h

@@ -0,0 +1,87 @@
+/*
+Copyright 2018 Carlos Filoteo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    40percent.club
+#define PRODUCT         ut47
+#define DESCRIPTION     An awesome 40% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
+#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Enable GNAP matrix serial output */
+#define GNAP_ENABLE
+
+/* USART configuration */
+#ifdef __AVR_ATmega32U4__
+#      define SERIAL_UART_BAUD 9600
+#      define SERIAL_UART_DATA UDR1
+#      define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#      define SERIAL_UART_RXD_VECT USART1_RX_vect
+#      define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#      define SERIAL_UART_INIT() do { \
+            /* baud rate */ \
+            UBRR1L = SERIAL_UART_UBRR; \
+            /* baud rate */ \
+            UBRR1H = SERIAL_UART_UBRR >> 8; \
+            /* enable TX */ \
+            UCSR1B = _BV(TXEN1); \
+            /* 8-bit data */ \
+            UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+            sei(); \
+        } while(0)
+#   else
+#       error "USART configuration is needed."
+#endif
+
+#endif

keyboards/ut47/keymaps/default/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif

keyboards/ut47/keymaps/default/keymap.c

@@ -0,0 +1,88 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#ifdef LED_ENABLE
+  #include "protocol/serial.h"
+#endif
+
+#define _______ KC_TRNS
+#define LT3_TAB LT(3, KC_TAB)
+#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
+
+enum custom_keycodes {
+    LED_TOG = SAFE_RANGE,
+    LED_CHG
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  LT3_TAB, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT_RSFT_ENT,
+  KC_LCTL, KC_LALT, KC_LGUI, KC_APP,  MO(2),      KC_SPC,        MO(1),  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+LAYOUT(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELETE,
+  _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  _______,
+  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+),
+
+LAYOUT(
+  KC_FN6,  KC_FN7,  KC_FN8,  KC_FN9,  KC_FN10, KC_FN11, KC_FN12, KC_FN13, KC_FN14, KC_FN15, KC_FN16, KC_DELETE,
+  _______, _______, _______, _______, _______, _______, _______, KC_FN17, KC_FN18, KC_FN19, KC_FN20, KC_FN21,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+),
+
+LAYOUT( /* Tab */
+  KC_ESC,  KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, LED_TOG, LED_CHG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______,     _______,      _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R
+),
+};
+
+//LED keymap functions
+ #ifdef LED_ENABLE
+void led_chmode(void) {
+  serial_send(101);
+}
+
+void led_toggle(void) {
+  serial_send(100);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    switch(keycode) {
+      case LED_TOG:
+        #ifdef LED_ENABLE
+        led_toggle();
+        #endif
+        return false;
+      case LED_CHG:
+        #ifdef LED_ENABLE
+        led_chmode();
+        #endif
+        return false;
+    }
+  }
+  return true;
+};
+#endif

keyboards/ut47/keymaps/default/readme.md

@@ -0,0 +1,19 @@
+# UT47 default keymap
+
+![UT47 layout image](https://i.imgur.com/Tsz5qsF.png)
+
+[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined)
+
+### LED Controls
+
+Use <kbd>TAB</kbd>+<kbd>Z</kbd> to cycle through brightness (8 steps)
+
+Use <kbd>TAB</kbd>+<kbd>X</kbd> to cycle through the following LED modes: 
+
+- solid
+- breathing
+- random
+- rain
+- reactive
+- poptang
+- off

keyboards/ut47/led.c

@@ -0,0 +1,38 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRB |= (1<<0);
+        PORTB &= ~(1<<0);
+        DDRD |= (1<<5);
+        PORTD &= ~(1<<5);
+    } else {
+        // Hi-Z
+        DDRB &= ~(1<<0);
+        PORTB &= ~(1<<0);
+        DDRD &= ~(1<<5);
+        PORTD &= ~(1<<5);
+    }
+}

keyboards/ut47/matrix.c

@@ -0,0 +1,209 @@
+/*
+Copyright 2018 Carlos Filoteo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "protocol/serial.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    serial_init();
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+/* Column pin configuration
+ * col: 0   1   2   3   4   5   6   7   8   9   10  11
+ * pin: D7  E6  B4  B5  B6  B2  B3  B1  F7  F6  F5  F4
+ */
+
+static void  init_cols(void)
+{
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRF  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTF |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
+    DDRE  &= ~(1<<6);
+    PORTE |=  (1<<6);
+    DDRD  &= ~(1<<7);
+    PORTD |=  (1<<7);
+    DDRB  &= ~(1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
+    PORTB |=  (1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
+}
+
+static matrix_row_t read_cols(void)
+{
+    return (PIND&(1<<7) ? 0 : (1<<0)) |
+           (PINE&(1<<6) ? 0 : (1<<1)) |
+           (PINB&(1<<4) ? 0 : (1<<2)) |
+           (PINB&(1<<5) ? 0 : (1<<3)) |
+           (PINB&(1<<6) ? 0 : (1<<4)) |
+           (PINB&(1<<2) ? 0 : (1<<5)) |
+           (PINB&(1<<3) ? 0 : (1<<6)) |
+           (PINB&(1<<1) ? 0 : (1<<7)) |
+           (PINF&(1<<7) ? 0 : (1<<8)) |
+           (PINF&(1<<6) ? 0 : (1<<9)) |
+           (PINF&(1<<5) ? 0 : (1<<10)) |
+           (PINF&(1<<4) ? 0 : (1<<11));
+}
+
+/* Row pin configuration
+ * row: 0   1   2   3
+ * pin: D1  D0  D4  C6
+ */
+
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRD  &= ~0b00010011;
+    PORTD &= ~0b00010011;
+    DDRC  &= ~0b01000000;
+    PORTC &= ~0b01000000;
+}
+
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<1);
+            PORTD &= ~(1<<1);
+            break;
+        case 1:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 2:
+            DDRD  |= (1<<4);
+            PORTD &= ~(1<<4);
+            break;
+        case 3:
+            DDRC  |= (1<<6);
+            PORTC &= ~(1<<6);
+            break;
+    }
+}

keyboards/ut47/readme.md

@@ -0,0 +1,41 @@
+# ut47
+
+![ut47](https://i.imgur.com/ZDKZQaj.jpg)
+
+Somewhere between ortholinear and standard offset. Created to have all the same functions on a Planck in a keyboard but with a more conventional keyboard row stagger.
+
+Keyboard Maintainer: [filoxo](https://github.com/filoxo), [network_operations]
+
+Hardware Supported: [PCB design](http://www.40percent.club/2016/10/gnap-20-plateless.html), Arduino Pro Micro
+
+Hardware Availability: [How to order](http://www.40percent.club/2017/03/ordering-pcb.html)
+
+### Instructions
+
+To flash the UT47 without LEDs (single controller), run:
+
+    make ut47:default
+
+To enable the UT47 LEDs (dual controller), run this for the main controller:
+
+    make ut47:default LED_ENABLE=yes
+
+Or you can add `LED_ENABLE = yes` to *rules.mk*
+
+And then flash [LED_controls.ino](LED_controls.ino) to the second controller using [Arduino IDE](https://www.arduino.cc/en/Main/Software) or similar. NOTE: Arduino IDE will require importing additional libraries to compile. 
+
+<small>The reason this is an "opt-in" feature is to prevent sending serial communication over the pin, in case it ends up being used for something else (like RGB underglow).</small>
+
+### Layout
+
+Go to the [default layout README](keymaps/default/readme.md) for more information.
+
+### Additional info
+
+Credit: Forked from [di0ib TMK version](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gnap)
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+### Build Guide
+
+[u/network_operations' build guide thread](https://www.reddit.com/r/MechanicalKeyboards/comments/7wqktu/gnap_the_cheap_40/)

keyboards/ut47/rules.mk

@@ -0,0 +1,70 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader
+BOOTLOADER = caterina
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC += matrix.c protocol/serial_uart.c
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+ifeq ($(strip $(LED_ENABLE)), yes)
+  OPT_DEFS += -DLED_ENABLE
+  SRC += led.c
+endif

keyboards/ut47/ut47.c

@@ -0,0 +1,50 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "ut47.h"
+#ifdef LED_ENABLE
+  #include "protocol/serial.h"
+#endif
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+  if (record->event.pressed) {
+    #ifdef LED_ENABLE
+      serial_send((record->event.key.row*16)+record->event.key.col);
+    #endif
+  }
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/ut47/ut47.h

@@ -0,0 +1,49 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef UT47_H
+#define UT47_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
+  K30, K31, K32, K33, K34,    K35,   K37, K38, K39, K3a, K3b  \
+) \
+	{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b }, \
+    { K30, K31, K32, K33, K34, KC_NO, K35, K37, K38, K39, K3a, K3b }  \
+	}
+
+#define LAYOUT_kc( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
+  K30, K31, K32, K33, K34,    K35,   K37, K38, K39, K3a, K3b  \
+) \
+  LAYOUT( \
+    KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b, \
+    KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b, \
+    KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b, \
+    KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO,KC_##K35,      KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b \
+  )
+
+#define LAYOUT_kc_ut47 LAYOUT_kc
+
+#endif

keyboards/v60_type_r/info.json

@@ -9,7 +9,7 @@
             "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
         },
 
-      "LAYOUT_ansi": {
+      "LAYOUT_60_ansi": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
         }
   }

keyboards/v60_type_r/keymaps/default/keymap.c

@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |Ctrl|Gui |Alt |      Space              |Fn0 |Gui |App|Ctrl|
    * `-----------------------------------------------------------'
    */
-  [0] = LAYOUT_ansi(
+  [0] = LAYOUT_60_ansi(
 	       KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
 	       KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
 	       KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  \
@@ -54,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |    |    |    |                        |    |    |    |    |
    * `-----------------------------------------------------------'
    */
-  [1] = LAYOUT_ansi(
+  [1] = LAYOUT_60_ansi(
 	       KC_GRV,    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL, \
 	       KC_TRNS,   KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,    KC_TRNS,          KC_INS, \
 	       KC_TRNS,   KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT,          KC_TRNS,          \

keyboards/v60_type_r/keymaps/vimouse/keymap.c

@@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |Ctrl|Alt |Gui |      Space/L3           |Gui |Alt |Ctrl|Fn1|
      * `-----------------------------------------------------------'
      */
-    [0] = KEYMAP_ALL(
+    [0] = LAYOUT_all(
         KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXX, KC_BSPC, \
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,     KC_BSLS, \
         LT(1, KC_CAPS),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  \
@@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |    |    |    |                        |    |    |    |    |
      * `-----------------------------------------------------------'
      */
-    [1] = KEYMAP_ALL(
+    [1] = LAYOUT_all(
         KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  _____,  KC_DEL, \
         _____,   _____,   _____,   _____,   _____,   _____,   _____,   _____,   _____,   _____, KC_PSCR, KC_SLCK, KC_PAUS,          KC_INS, \
         _____,   _____,   _____,   _____,   _____,   _____, KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT, KC_HOME, KC_PGUP,           _____,          \
@@ -70,7 +70,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |    |    |    |                        |    |    |    |    |
      * `-----------------------------------------------------------'
      */
-    [2] = KEYMAP_ALL(
+    [2] = LAYOUT_all(
         _____,   _____,   _____,   _____,   _____,   _____,   _____,   _____,   _____,   _____,  _____,  _____,  _____,  _____,  _____, \
         _____,   _____,   _____,   _____,   _____,   _____,   _____,   KC_MS_WH_UP, KC_MS_WH_DOWN,   _____, _____, _____, _____,          _____, \
         _____,   _____,   _____,   _____,   _____,   _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_UP, KC_MS_RIGHT, _____, _____,           _____,          \
@@ -89,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |    |    |    |                        |    |    |    |    |
      * `-----------------------------------------------------------'
      */
-    [3] = KEYMAP_ALL(
+    [3] = LAYOUT_all(
         _____, BL_TOGG, BL_STEP, RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R,   _____,   _____,   _____,   _____,   _____,   _____,  _____,  _____, \
         _____, RGB_RI,  RGB_GI,  RGB_BI,  RGB_HUI, RGB_SAI, RGB_VAI,   _____,   _____,   _____,   _____,   _____,   _____,          _____, \
         _____, RGB_RD,  RGB_GD,  RGB_BD,  RGB_HUD, RGB_SAD, RGB_VAD,   _____,   _____,   _____,   _____,   _____,           _____,          \

keyboards/v60_type_r/v60_type_r.h

@@ -55,7 +55,7 @@ enum my_keycodes {
 
 // KBP V60 Type R with ALL possible layouts
 
-#define KEYMAP_ALL( \
+#define LAYOUT_all( \
 	       k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
 	       k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      k1d, \
 	       k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,           k2c, \
@@ -89,7 +89,7 @@ enum my_keycodes {
 
   // KBP V60 Type R with ANSI layout
 
-  #define KEYMAP_ANSI( \
+  #define LAYOUT_60_ansi( \
 	       k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,      k0e, \
 	       k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      k1d, \
 	       k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,           k2c, \
@@ -106,7 +106,4 @@ enum my_keycodes {
       { k40, k41, k42, k43,   k44, k45,   k46, k47 } \
   }
 
-#define LAYOUT_all  KEYMAP_ALL
-#define LAYOUT_ansi KEYMAP_ANSI
-
 #endif

keyboards/xd75/keymaps/davidrambo/keymap.c

@@ -3,7 +3,7 @@
 //aliases for clarity in layering
 #define _______ KC_TRNS
 #define A_BSPC  LALT(KC_BSPC) // delete whole word in Mac
-#define C_BSPS  LCTL(KC_BSPC) // delete whole word in PC
+// #define C_BSPS  LCTL(KC_BSPC) // delete whole word in PC; currently not in use
 #define A_LEFT  LALT(KC_LEFT)
 #define A_RGHT  LALT(KC_RGHT)
 #define C_RGHT  LCTL(KC_RGHT)
@@ -72,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
   { NAVPC  , _______, _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______ },
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
-  { _______, KC_LCTL, KC_LGUI, _______, KC_LCTL, CBSPC  , _______, _______, _______, _______, _______, KC_RCTL, KC_RALT, KC_RGUI, _______ },
+  { _______, KC_LCTL, KC_LGUI, _______, KC_LCTL, _______, _______, _______, _______, _______, _______, KC_RCTL, KC_RALT, KC_RGUI, _______ },
  },
 
 /* SYMBOL
@@ -83,7 +83,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * |        | !      | @      | #      | $      | %      |        |        |        | ^      | &      | *      | (      | )      | =      |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        |        |        |        |        | -_     |        |        |        |        |
+ * |        | HOME   | END    | BL_OFF | BL_ON  |        |        |        |        |        | -_     |        |        |        |        |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
@@ -93,7 +93,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , _______, _______, _______, KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , _______},
   { KC_LBRC, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , _______, _______, _______, KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_RBRC},
   { _______, KC_EXLM, KC_AT  , KC_HASH, KC_DLR , KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_EQL },
-  { _______, BL_OFF , BL_ON  , BL_DEC , BL_INC , KC_F11 , _______, _______, _______, KC_F12 , KC_MINS, _______, _______, _______, _______},
+  { _______, KC_HOME, KC_END , BL_OFF , BL_ON  , KC_F11 , _______, _______, _______, KC_F12 , KC_MINS, _______, _______, _______, _______},
   { _______, _______, _______, _______, _______, A_BSPC , _______, _______, _______, _______, _______, _______, _______, _______, _______},
  },
 
@@ -102,15 +102,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB  , A_LEFT,  KC_UP,   A_RGHT , KC_DEL , _______},
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, GSL    , KC_LEFT, KC_DOWN, KC_RGHT, GSR    , _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, G_TAB  , KC_HOME, _______, KC_END , G_GRV  , _______},
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, G_TAB  , ABSPC  , KC_HOME, KC_END , G_GRV  , _______},
   { RESET  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
  },
 
  [_NAVPC] = { /* NAVIGATION FOR WINDOWS: replaces Alt with Control, GUI with Alt, and browser tab shortcuts*/
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB  , C_LEFT,  KC_UP,   C_RGHT , KC_DEL , _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, CTLPGDN, KC_LEFT, KC_DOWN, KC_RGHT, CTLPGUP, _______},
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, CTLPGUP, KC_LEFT, KC_DOWN, KC_RGHT, CTLPGDN, _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, A_TAB  , KC_HOME, _______, KC_END , _______, _______},
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, A_TAB  , CBSPC  , KC_HOME, KC_END , _______, _______},
   { RESET  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
  }
 };

keyboards/xd75/keymaps/rambo/keymap.c

@@ -1,150 +0,0 @@
-#include "xd75.h"
-
-//aliases for clarity in layering
-#define _______ KC_TRNS
-#define A_BSPC  LALT(KC_BSPC) // delete whole word in Mac
-#define C_BSPS  LCTL(KC_BSPC) // delete whole word in PC
-#define A_LEFT  LALT(KC_LEFT)
-#define A_RGHT  LALT(KC_RGHT)
-#define C_RGHT  LCTL(KC_RGHT)
-#define C_LEFT  LCTL(KC_LEFT)
-#define SftEnt  SFT_T(KC_ENT)
-#define GBSPC   LGUI_T(KC_BSPC)
-#define CBSPC   LCTL_T(KC_BSPC)
-
-//internet browser tab shortcuts and window swapping for Mac and Win
-#define GSL     LGUI(S(KC_LEFT)) // back one tab in Safari
-#define GSR     LGUI(S(KC_RGHT)) // forward one tab in Safari
-#define CTLPGDN LCTL(KC_PGDN)   // back one tab on Windows
-#define CTLPGUP LCTL(KC_PGUP)   // forward one tab on Windows
-#define G_TAB   LGUI(KC_TAB)    // MAC: switch applications
-#define G_GRV   LGUI(KC_GRV)    // MAC: switch between windows within an application
-#define A_TAB   LALT(KC_TAB)
-#define C_TAB   LCTL(KC_TAB)
-
-//
-#define NAV     LT(3, KC_TAB)
-#define NAVPC   LT(4, KC_TAB)
-
-// Layer shorthand
-#define _COLEMAK 0
-#define _PC 1
-#define _SYMBOL 2   //Function keys, numbers, symbols, Backlighting
-#define _NAV 3   //Navigation Layer on Mac
-#define _NAVPC 4 //Navigation Layer on Win
-
-//tapdance declarations
-enum {
-  SFT_LCK
-};
-
-//alias for tapdance
-#define SftLck TD(SFT_LCK)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* COLEMAK
- * .--------------------------------------------------------------------------------------------------------------------------------------.
- * | `~     | 1      | 2      | 3      | 4      | 5      | -      | SWITCH | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
- * | ESC/`~ | Q      | W      | F      | P      | G      | [      | \      | ]      | J      | L      | U      | Y      | ;      | BACKSP |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
- * | NAVTAB | A      | S      | D      | F      | G      | PgUp   |PlayPaus| ENTER  | H      | N      | E      | I      | O      | '      |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
- * |SFT/CAPS| Z      | X      | C      | V      | B      | PgDn   |  UP    | ENTER  | K      | M      | ,      | .      | /      | SftEnt |
- * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
- * | DEL    | LGUI   | LCTRL  | LALT   | LGUI   | BKSPC  | LEFT   | DOWN   | RIGHT  | SPACE  | SYMBOL | RGUI   | RALT   | RCTRL  | BL     |
- * '--------------------------------------------------------------------------------------------------------------------------------------'
- */
-
- [_COLEMAK] = { /* COLEMAK */
-  { KC_GRV , KC_1,    KC_2,    KC_3,    KC_4,    KC_5,   KC_MINS, TG(1)  , KC_EQL,  KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_BSPC },
-  { KC_GESC, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,   KC_LBRC, KC_BSLS, KC_RBRC, KC_J,   KC_L,   KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
-  { NAV    , KC_A,    KC_R,    KC_S,    KC_T,    KC_D,   KC_PGUP, KC_ESC , KC_ENT , KC_H,   KC_N,   KC_E,    KC_I,    KC_O,    KC_QUOT },
-  { SftLck , KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_PGDN, KC_UP  , KC_ENT , KC_K,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, SftEnt  },
-  { KC_DEL , KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI, GBSPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC, MO(2) , KC_RGUI, KC_RALT, KC_RCTL, BL_STEP },
- },
-    
-// Windows Layer: essentially swaps Control and GUI
-
- [_PC] = { /* WINDOWS */
-  { _______, _______, _______, _______, _______, _______, _______, TG(0)  , _______, _______, _______, _______, _______, _______, _______ },
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
-  { NAVPC  , _______, _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______ },
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
-  { _______, KC_LCTL, KC_LGUI, _______, KC_LCTL, CBSPC  , _______, _______, _______, _______, _______, KC_RCTL, KC_RALT, KC_RGUI, _______ },
- },
-
-/* SYMBOL
- * .--------------------------------------------------------------------------------------------------------------------------------------.
- * | F12    | F1     | F2     | F3     | F4     | F5     |        |        |        | F6     | F7     | F8     | F9     | F10    | F11    |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | [{     | 1      | 2      | 3      | 4      | 5      |        |        |        | 6      | 7      | 8      | 9      | 0      | }]     |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        | !      | @      | #      | $      | %      |        |        |        | ^      | &      | *      | (      | )      | =      |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        |        |        |        |        | -_     |        |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
- * '--------------------------------------------------------------------------------------------------------------------------------------'
- */
-
- [_SYMBOL] = { /* SYMBOL */
-  { _______, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , _______, _______, _______, KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , _______},
-  { KC_LBRC, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , _______, _______, _______, KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_RBRC},
-  { _______, KC_EXLM, KC_AT  , KC_HASH, KC_DLR , KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_EQL },
-  { _______, BL_OFF , BL_ON  , BL_DEC , BL_INC , KC_F11 , _______, _______, _______, KC_F12 , KC_MINS, _______, _______, _______, _______},
-  { _______, _______, _______, _______, _______, A_BSPC , _______, _______, _______, _______, _______, _______, _______, _______, _______},
- },
-
- 
- [_NAV] = { /* NAVIGATION for Mac */
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB  , A_LEFT,  KC_UP,   A_RGHT , KC_DEL , _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, GSL    , KC_LEFT, KC_DOWN, KC_RGHT, GSR    , _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, G_TAB  , KC_HOME, _______, KC_END , G_GRV  , _______},
-  { RESET  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
- },
-
- [_NAVPC] = { /* NAVIGATION FOR WINDOWS: replaces Alt with Control, GUI with Alt, and browser tab shortcuts*/
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB  , C_LEFT,  KC_UP,   C_RGHT , KC_DEL , _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, CTLPGDN, KC_LEFT, KC_DOWN, KC_RGHT, CTLPGUP, _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, A_TAB  , KC_HOME, _______, KC_END , _______, _______},
-  { RESET  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
- }
-};
-
-// Shift vs capslock function. From bbaserdem's Planck keymap.
-void caps_tap (qk_tap_dance_state_t *state, void *user_data) {
-    if (state->count == 1) {
-        register_code (KC_LSFT);
-    } else if (state->count == 2) {
-        unregister_code (KC_LSFT);
-        register_code (KC_CAPS);
-    }
-}
-void caps_tap_end (qk_tap_dance_state_t *state, void *user_data) {
-    if (state->count == 1) {
-        unregister_code (KC_LSFT);
-    } else {
-        unregister_code (KC_CAPS);
-    }
-}
-
-//Tap Dance Definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
-  //Tap once for Shift, twice for Caps Lock
-  [SFT_LCK] = ACTION_TAP_DANCE_FN_ADVANCED( caps_tap, NULL, caps_tap_end )
-};
-
-/* Template for future layers
- [_LAYER_NAME] = { 
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
- }
-};
-*/

keyboards/xd75/keymaps/rambo/readme.md

@@ -1,4 +0,0 @@
-# A Colemak layout for XD75 with both Mac and Windows layers.
-# These two layers share momentary toggle access to a "Symbol" layer, which is modeled after my Planck layout.
-# Each of the base Colemak layers have their own Navigation layers for the right hand to use arrows and shortcuts for both text editing and web browsing.
-# The rules.mk file overrides the XD75's "BACKLIGHT_ENABLE" with YES and also adds tap dance functionality.

keyboards/xd75/keymaps/rambo/rules.mk

@@ -1,2 +0,0 @@
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-TAP_DANCE_ENABLE = yes      # Enable tap dance functionality

layouts/community/60_ansi/mechmerlin-ansi/keymap.c

@@ -0,0 +1,29 @@
+#include QMK_KEYBOARD_H
+
+#define BASE   0 
+#define FN     1
+#define ARROWS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = LAYOUT_60_ansi(
+    KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC, \
+	KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLASH, \
+    KC_LCTL, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,  \
+    KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LALT, KC_LGUI,       KC_SPACE,             MO(1),   KC_RALT, KC_RGUI, KC_RCTL),
+
+[FN] = LAYOUT_60_ansi(
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  \
+    KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+    KC_TRNS, KC_TRNS, KC_TRNS,       TG(2),                                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), 
+
+[ARROWS] = LAYOUT_60_ansi(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, \
+    KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,                               KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT)
+
+ };

layouts/community/60_ansi/mechmerlin-ansi/readme.md

@@ -0,0 +1,18 @@
+MechMerlin's Standard ANSI 60% Layout
+======================
+
+This is the 60% layout used by u/merlin36, host of the [MechMerlin](www.youtube.com/mechmerlin) 
+YouTube channel.
+
+It is used on his   
+[Duck Eagle V2](https://github.com/qmk/qmk_firmware/tree/master/keyboards/eagle_viper/v2)   
+[KBP V60 Type R Polestar](https://github.com/qmk/qmk_firmware/tree/master/keyboards/v60_type_r)   
+[NPKC KC60](https://github.com/qmk/qmk_firmware/tree/master/keyboards/kc60)   
+
+## Keymap Notes
+- Highly influenced by the KBP V60 and WKL B.Face standard layouts
+- Does not support any form of inswitch or underglow lighting as Merlin hates them.
+- Arrow toggle switch is FN + Space
+
+### Build
+To build this keymap, simply run `make your_keyboard:mechmerlin-ansi`.

layouts/community/60_ansi/talljoe-ansi/config.h

@@ -0,0 +1,22 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+#define ENABLE_GAME_LAYER
+
+#define LAYOUT(                                                                     \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
+    K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
+) LAYOUT_60_ansi(                                                                   \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,           \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,                \
+    K40, K41, K42,           K45,           K48, K49,      K4B, K4C                 \
+)
+
+#endif //CONFIG_USER_H

layouts/community/60_ansi/talljoe-ansi/keymap.c

@@ -0,0 +1 @@
+// This space intentionally left blank

layouts/community/60_ansi/talljoe-ansi/rules.mk

@@ -0,0 +1 @@
+USER_NAME := talljoe

layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c

@@ -0,0 +1,29 @@
+#include QMK_KEYBOARD_H
+
+#define BASE   0 
+#define FN     1
+#define ARROWS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = LAYOUT_60_ansi_split_bs_rshift(
+    KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_NO, KC_BSPC, \
+	KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLASH, \
+    KC_LCTL, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,  \
+    KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, TG(2), \
+    KC_LCTL, KC_LALT, KC_LGUI,       KC_SPACE,             MO(1),   KC_RALT, KC_RGUI, KC_RCTL),
+
+[FN] = LAYOUT_60_ansi_split_bs_rshift(
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NO, KC_DEL, \
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  \
+    KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+    KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), 
+
+[ARROWS] = LAYOUT_60_ansi_split_bs_rshift(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  \
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, \
+    KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,                               KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT)
+
+ };

layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/readme.md

@@ -0,0 +1,17 @@
+MechMerlin's Split ANSI 60% Layout
+======================
+
+This is the 60% layout with split backspace and right shift used by u/merlin36, 
+host of the [MechMerlin](www.youtube.com/mechmerlin) YouTube channel.
+
+It is used on his   
+[Sentraq S60-X RGB](https://github.com/qmk/qmk_firmware/tree/master/keyboards/s60_x)   
+[MechanicalKeyboards.com FaceW](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bfake)   
+
+## Keymap Notes
+- Highly influenced by the KBP V60 and WKL B.Face standard layouts
+- Does not support any form of inswitch or underglow lighting as Merlin hates them.
+- Arrow toggle switch is the 1u key by right shift
+
+### Build
+To build this keymap, simply run `make your_keyboard:mechmerlin-split`.

layouts/community/60_ansi_split_bs_rshift/talljoe/config.h

@@ -3,8 +3,70 @@
 
 #include QMK_KEYBOARD_CONFIG_H
 
-#define PREVENT_STUCK_MODIFIERS
+#define ENABLE_GAME_LAYER
 
-#define KM LAYOUT_60_ansi_split_bs_rshift
+#define LAYOUT(                                                                     \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
+    K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
+) LAYOUT_60_ansi_split_bs_rshift(                                                   \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
+    K40, K41, K42,           K45,           K48, K49,      K4B, K4C                 \
+)
 
-#endif //CONFIG_USER_H
+/* Color Map */
+#define CM( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2C, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3C, K3D, \
+    K40, K41, K42,           K47,                     K4A, K4B, K4C, K4D  \
+) { \
+   { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+   { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+   { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+   { K30, {}, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+   { K40, K41, K42, {}, {}, {}, {}, K47, {}, {}, K4A, K4B, K4C, K4D } \
+  }
+
+#ifdef KEYBOARD_zeal60
+
+  #define ZEAL_RGB
+
+  /* enable/disable LEDs based on layout */
+  #undef USE_SPLIT_BACKSPACE
+  #define USE_SPLIT_BACKSPACE 1
+
+  #undef USE_SPLIT_LEFT_SHIFT
+  #define USE_SPLIT_LEFT_SHIFT 0
+
+  #undef USE_SPLIT_RIGHT_SHIFT
+  #define USE_SPLIT_RIGHT_SHIFT 1
+
+  #undef USE_7U_SPACEBAR
+  #define USE_7U_SPACEBAR 0
+
+  #undef USE_ISO_ENTER
+  #define USE_ISO_ENTER 0
+
+  #undef TAPPING_TOGGLE
+  #define TAPPING_TOGGLE 2
+
+  #undef BACKLIGHT_MOD_LAYER_3
+  #define BACKLIGHT_MOD_LAYER_3 RESET_LAYER
+
+  #undef BACKLIGHT_ALPHAS_MODS_ROW_0
+  #undef BACKLIGHT_ALPHAS_MODS_ROW_1
+  #undef BACKLIGHT_ALPHAS_MODS_ROW_2
+  #define BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
+  #define BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
+  #define BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
+
+#endif //KEYBOARD_zeal60
+
+#endif //CONFIG_USER_H

layouts/community/60_ansi_split_bs_rshift/talljoe/keymap.c

@@ -1,113 +1,89 @@
-#include QMK_KEYBOARD_H
+#ifdef KEYBOARD_zeal60
+#include "config.h"
+#include "zeal60.h"
+#include "zeal_backlight.h"
+#include "action_layer.h"
+#include "solarized.h"
+#include "talljoe.h"
 
-enum layers {
+// from zeal_backlight.c
-    _BASE = 0,
+// we want to be able to set indicators for the spacebar stabs
-    _WORKMAN,
+// but they are not represented by a row/index.
-    _NORMAN,
+extern zeal_backlight_config g_config;
-    _DVORAK,
+void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led );
-    _COLMAK,
-    _GAME,
-    _NAV,
-    _ADJUST,
-    _RESET,
-};
 
-#define _______ KC_TRNS
+void set_backlight_defaults(void) {
-#define XXXXXXX KC_NO
+  uint8_t space;
+  uint8_t caps_lock;
+  map_row_column_to_led(3, 12, &caps_lock);
+  map_row_column_to_led(4, 7, &space);
+  zeal_backlight_config default_values = {
+    .use_split_backspace = USE_SPLIT_BACKSPACE,
+    .use_split_left_shift = USE_SPLIT_LEFT_SHIFT,
+    .use_split_right_shift = USE_SPLIT_RIGHT_SHIFT,
+    .use_7u_spacebar = USE_7U_SPACEBAR,
+    .use_iso_enter = USE_ISO_ENTER,
+    .disable_when_usb_suspended = 1,
+    .disable_after_timeout = 0,
+    .brightness = 255,
+    .effect = 10,
+    .color_1 = solarized.base2,
+    .color_2 = solarized.base02,
+    .caps_lock_indicator = { .index = caps_lock, .color = solarized.red },
+    .layer_1_indicator = { .index = space, .color = solarized.blue },
+    .layer_2_indicator = { .index = space, .color = solarized.yellow },
+    .layer_3_indicator = { .index = 254, .color = solarized.red },
+    .alphas_mods = {
+      BACKLIGHT_ALPHAS_MODS_ROW_0,
+      BACKLIGHT_ALPHAS_MODS_ROW_1,
+      BACKLIGHT_ALPHAS_MODS_ROW_2,
+      BACKLIGHT_ALPHAS_MODS_ROW_3,
+      BACKLIGHT_ALPHAS_MODS_ROW_4 }
+  };
+  memcpy(&g_config, &default_values, sizeof(zeal_backlight_config));
+  backlight_config_save();
 
-#define NV_SPC  LT(_NAV, KC_SPC)
+  solarized_t* S = &solarized;
-#define AD_GRV  LT(_ADJUST, KC_GRV)
+  HSV alphas = S->base2;
-
+  HSV custom_color_map[MATRIX_ROWS][MATRIX_COLS] = CM(
-#define MO_NAV    MO(_NAV)
+    S->red, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->red,
-#define MO_ADJ    MO(_ADJUST)
+    S->orange, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->orange,
-#define MO_RST    MO(_RESET)
+    S->green, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->green,
-#define TG_ADJ    TG(_ADJUST)
+    S->blue, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->blue, S->blue,
-#define TG_GAME   TG(_GAME)
+    S->violet, S->magenta, S->yellow,              alphas,          S->yellow, S->magenta, S->violet, S->green
-#define LY_QWER   DF(_BASE)
+  );
-#define LY_WORK   DF(_WORKMAN)
+  for (uint8_t row = 0; row < MATRIX_ROWS; ++row) {
-#define LY_NRMN   DF(_NORMAN)
+    for (uint8_t col = 0; col < MATRIX_COLS; ++col) {
-#define LY_DVRK   DF(_DVORAK)
+      backlight_set_key_color(row, col, custom_color_map[row][col]);
-#define LY_CLMK   DF(_COLMAK)
-#define TG_NKRO   MAGIC_TOGGLE_NKRO
-#define KC_PTT    KC_F24
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BASE] = KM(
-      KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV,
-      KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,
-      KC_LCTL, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT,          KC_ENT ,
-      KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH,          KC_RSFT, AD_GRV ,
-      KC_LCTL, KC_LGUI, KC_LALT,                            NV_SPC ,                            KC_RALT, KC_RGUI, KC_RCTL, KC_PTT ),
-  [_WORKMAN] = KM(
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-      _______, KC_Q   , KC_D   , KC_R   , KC_W   , KC_B   , KC_J   , KC_F   , KC_U   , KC_P   , KC_SCLN, _______, _______, _______,
-      _______, KC_A   , KC_S   , KC_H   , KC_T   , KC_G   , KC_Y   , KC_N   , KC_E   , KC_O   , KC_I   , _______,          _______,
-      _______, KC_Z   , KC_X   , KC_M   , KC_C   , KC_V   , KC_K   , KC_L   , KC_COMM, KC_DOT , KC_SLSH,          _______, _______,
-      _______, _______, _______,                            _______,                            _______, _______, _______, _______),
-  [_NORMAN] = KM(
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-      _______, KC_Q   , KC_W   , KC_D   , KC_F   , KC_K   , KC_J   , KC_U   , KC_R   , KC_L   , KC_SCLN, _______, _______, _______,
-      _______, KC_A   , KC_S   , KC_E   , KC_T   , KC_G   , KC_Y   , KC_N   , KC_I   , KC_O   , KC_H   , _______,          _______,
-      _______, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_P   , KC_M   , KC_COMM, KC_DOT , KC_SLSH,          _______, _______,
-      _______, _______, _______,                            _______,                            _______, _______, _______, _______),
-  [_DVORAK] = KM(
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______,
-      _______, KC_QUOT, KC_COMM, KC_DOT , KC_P   , KC_Y   , KC_F   , KC_G   , KC_C   , KC_R   , KC_L   , KC_SLSH, KC_EQL , _______,
-      _______, KC_A   , KC_O   , KC_E   , KC_U   , KC_I   , KC_D   , KC_H   , KC_T   , KC_N   , KC_S   , KC_MINS,          _______,
-      _______, KC_SCLN, KC_Q   , KC_J   , KC_K   , KC_X   , KC_B   , KC_M   , KC_W   , KC_V   , KC_Z   ,          _______, _______,
-      _______, _______, _______,                            _______,                            _______, _______, _______, _______),
-  [_COLMAK] = KM(
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-      _______, KC_Q   , KC_W   , KC_F   , KC_P   , KC_G   , KC_J   , KC_L   , KC_U   , KC_Y   , KC_SCLN, _______, _______, _______,
-      _______, KC_A   , KC_R   , KC_S   , KC_T   , KC_D   , KC_H   , KC_N   , KC_E   , KC_I   , KC_O   , _______,          _______,
-      _______, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_K   , KC_M   , KC_COMM, KC_DOT , KC_SLSH,          _______, _______,
-      _______, _______, _______,                            _______,                            _______, _______, _______, _______),
-  [_GAME] = KM(
-      KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV,
-      KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,
-      MO_NAV , KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT,          KC_ENT ,
-      KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH,          KC_RSFT, MO_ADJ ,
-      KC_LCTL, KC_PTT , KC_PGDN,                            KC_SPC ,                            KC_RALT, KC_RGUI, KC_RCTL, KC_PTT ),
-  [_NAV] = KM(
-      KC_GRV , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-      XXXXXXX, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_VOLU, KC_INS , KC_PGUP, KC_UP  , KC_PGDN, XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL ,
-      XXXXXXX, KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_MUTE, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END , XXXXXXX,          TG_ADJ ,
-      KC_LSFT, KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_VOLD, KC_END , KC_PGDN, XXXXXXX, XXXXXXX, XXXXXXX,          KC_RSFT, XXXXXXX,
-      KC_LCTL, KC_LGUI, KC_LALT,                            _______,                            KC_RALT, KC_RGUI, KC_RCTL, _______),
-  // Adjust layer is on the split-shift key; or NAV+Enter (for non-split keyboards)
-  [_ADJUST] = KM(
-      MO_RST , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          TG_ADJ ,
-      TG_NKRO, LY_QWER, LY_WORK, LY_NRMN, LY_DVRK, LY_CLMK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TG_GAME,          XXXXXXX, XXXXXXX,
-      MO_RST , AG_NORM, AG_SWAP,                            BL_TOGG,                            XXXXXXX, XXXXXXX, XXXXXXX, KC_CAPS),
-  // To Reset hit FN + ` + Esc
-  [_RESET] = KM(
-      RESET  , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX,
-      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX, XXXXXXX,
-      RESET  , XXXXXXX, XXXXXXX,                            XXXXXXX,                            XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX),
-};
-
-void matrix_scan_user(void) {
-  #ifdef KEYBOARD_gh60
-    if (IS_LAYER_ON(_GAME)) {
-      gh60_wasd_leds_on();
-    } else {
-      gh60_wasd_leds_off();
     }
-  #endif
+  }
 }
 
-void matrix_init_user(void) {
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  if (!eeconfig_is_enabled()) {
+  static uint8_t last_effect;
-    eeconfig_init();
+  switch (keycode) {
+    case DFAULTS:
+      if (IS_PRESSED(record->event)) set_backlight_defaults();
+      return false;
+    case BL_TOGG:
+      if (IS_PRESSED(record->event)) {
+        if (g_config.effect) {
+          last_effect = g_config.effect;
+          g_config.effect = 0;
+        } else {
+          g_config.effect = last_effect;
+        }
+      }
+      return false;
+    case EFFECT...EFFECT_END:
+      if (IS_PRESSED(record->event)) {
+        uint8_t effect = keycode - EFFECT;
+        g_config.effect = effect;
+        backlight_config_save();
+      }
+      return false;
   }
-}
 
-uint32_t default_layer_state_set_kb(uint32_t state) {
+  return true;
-  // persist changes to default layers
+}
-  eeconfig_update_default_layer(state);
+#endif
-  return state;
-}

layouts/community/ergodox/drashna/keymap.c

@@ -28,7 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 bool skip_leds = false;
 
 
-
+#ifdef KEYBOARD_ergodox_ez
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Keymap 0: QWERTY Layer
  *
@@ -56,14 +56,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         // left hand                                                                       // right hand
              KC_EQL,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    OSL(_MOUS),           OSL(_MOUS), KC_6,    KC_7,    KC_8,    KC_9,     KC_0,   KC_MINS,
              KC_TAB,  _________________QWERTY_L1_________________, TG(_DIABLO),         TG(_DIABLO), _________________QWERTY_R1_________________, KC_BSLS,
-           TG(_MODS), _________________QWERTY_L2_________________,                                   _________________QWERTY_R2_________________, GUI_T(KC_QUOT),
+             SH_TT,   _________________QWERTY_L2_________________,                                   _________________QWERTY_R2_________________, KC_QUOT,
              KC_MLSF, _________________QWERTY_L3_________________, TG(_GAMEPAD),       TG(_GAMEPAD), _________________QWERTY_R3_________________, KC_MRSF,
     LT(_SYMB,KC_GRV), ___________ERGODOX_BOTTOM_LEFT_____________,                                   ___________ERGODOX_BOTTOM_RIGHT____________, TT(_SYMB),
-                                                    ALT_T(KC_APP), KC_LGUI,                 KC_RGUI, CTL_T(KC_ESCAPE),
+                                                    __________________ERGODOX_THUMB_CLUSTER_____________________
-                                                                   KC_HOME,                 KC_PGUP,
-                                                 KC_SPACE,KC_BSPC, KC_END,                  KC_PGDN, KC_DEL,  KC_ENTER
-
-
     ),
 /* Keymap 0: COLEMAK layer
  *
@@ -92,12 +88,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         // left hand                                                                       // right hand
              KC_EQL,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    OSL(_MOUS),           OSL(_MOUS), KC_6,    KC_7,    KC_8,    KC_9,     KC_0,   KC_MINS,
              KC_TAB,  _________________COLEMAK_L1________________, TG(_DIABLO),         TG(_DIABLO), _________________COLEMAK_R1________________, KC_BSLS,
-           TG(_MODS), _________________COLEMAK_L2________________,                                   _________________COLEMAK_R2________________, GUI_T(KC_QUOT),
+             SH_TT,   _________________COLEMAK_L2________________,                                   _________________COLEMAK_R2________________, KC_QUOT,
              KC_MLSF, _________________COLEMAK_L3________________, TG(_GAMEPAD),       TG(_GAMEPAD), _________________COLEMAK_R3________________, KC_MRSF,
     LT(_SYMB,KC_GRV), ___________ERGODOX_BOTTOM_LEFT_____________,                                   ___________ERGODOX_BOTTOM_RIGHT____________, TT(_SYMB),
-                                                    ALT_T(KC_APP), KC_LGUI,                 KC_RGUI, CTL_T(KC_ESCAPE),
+                                                    __________________ERGODOX_THUMB_CLUSTER_____________________
-                                                                   KC_HOME,                 KC_PGUP,
-                                                 KC_SPACE,KC_BSPC, KC_END,                  KC_PGDN, KC_DEL,  KC_ENTER
     ),
 /* Keymap 0: DVORAK Layout
  *
@@ -126,12 +120,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         // left hand        // right hand
              KC_EQL,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    OSL(_MOUS),           OSL(_MOUS), KC_6,    KC_7,    KC_8,    KC_9,     KC_0,   KC_BSLS,
              KC_TAB,  _________________DVORAK_L1_________________, TG(_DIABLO),         TG(_DIABLO), _________________DVORAK_R1_________________, KC_SLSH,
-           TG(_MODS), _________________DVORAK_L2_________________,                                   _________________DVORAK_R2_________________, GUI_T(KC_MINS),
+             SH_TT,   _________________DVORAK_L2_________________,                                   _________________DVORAK_R2_________________, KC_MINS,
              KC_MLSF, _________________DVORAK_L3_________________, TG(_GAMEPAD),       TG(_GAMEPAD), _________________DVORAK_R3_________________, KC_MRSF,
     LT(_SYMB,KC_GRV), ___________ERGODOX_BOTTOM_LEFT_____________,                                   ___________ERGODOX_BOTTOM_RIGHT____________, TT(_SYMB),
-                                                    ALT_T(KC_APP), KC_LGUI,                 KC_RGUI, CTL_T(KC_ESCAPE),
+                                                    __________________ERGODOX_THUMB_CLUSTER_____________________
-                                                                   KC_HOME,                 KC_PGUP,
-                                                 KC_SPACE,KC_BSPC, KC_END,                  KC_PGDN, KC_DEL,  KC_ENTER
     ),
 /* Keymap 0: WORKMAN layer
  *
@@ -160,12 +152,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         // left hand
              KC_EQL,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    OSL(_MOUS),           OSL(_MOUS), KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
              KC_TAB,  _________________WORKMAN_L1________________, TG(_DIABLO),         TG(_DIABLO), _________________WORKMAN_R1________________, KC_BSLS,
-           TG(_MODS), _________________WORKMAN_L2________________,                                   _________________WORKMAN_R2________________, GUI_T(KC_QUOT),
+             SH_TT,   _________________WORKMAN_L2________________,                                   _________________WORKMAN_R2________________, KC_QUOT,
              KC_MLSF, _________________WORKMAN_L3________________, TG(_GAMEPAD),       TG(_GAMEPAD), _________________WORKMAN_R3________________, KC_MRSF,
     LT(_SYMB,KC_GRV), ___________ERGODOX_BOTTOM_LEFT_____________,                                   ___________ERGODOX_BOTTOM_RIGHT____________, TT(_SYMB),
-                                                    ALT_T(KC_APP), KC_LGUI,                 KC_RGUI, CTL_T(KC_ESCAPE),
+                                                    __________________ERGODOX_THUMB_CLUSTER_____________________
-                                                                   KC_HOME,                 KC_PGUP,
-                                                 KC_SPACE,KC_BSPC, KC_END,                  KC_PGDN, KC_DEL,  KC_ENTER
     ),
 
 // Reverts OSM(Shift) to normal Shifts. However, may not need since we fixed the issue with RDP (LOCAL RESOURCES)
@@ -203,9 +193,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 */
   [_SYMB] = LAYOUT_ergodox_pretty(
              EPRM,    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_QWERTY,             KC_QWERTY, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
-             KC_RST,  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE, KC_WORKMAN,            KC_DVORAK, KC_PPLS, KC_KP_7, KC_KP_8, KC_KP_9, KC_PAST, KC_F12,
+             KC_RST,  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE, KC_COLEMAK,           KC_WORKMAN, KC_PPLS, KC_KP_7, KC_KP_8, KC_KP_9, KC_PAST, KC_F12,
              KC_MAKE, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRAVE,                                  KC_PMNS, KC_KP_4, KC_KP_5, KC_KP_6, KC_PSLS, KC_PSCREEN,
-             VRSN,    KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_COLEMAK,           KC_COLEMAK, KC_NLCK, KC_KP_1, KC_KP_2, KC_KP_3, KC_PEQL, KC_PAUSE,
+             VRSN,    KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_DVORAK,            TG(_MODS), KC_NLCK, KC_KP_1, KC_KP_2, KC_KP_3, KC_PEQL, KC_PAUSE,
              KC_TRNS, KC_AMPR, KC_ASTR, KC_COLN, KC_SCLN,                                                     KC_KP_0, KC_KP_0, KC_PDOT, KC_PENT, KC_TRNS,
                                                           RGB_SMOD, KC_RGB_T,               KC_TRNS, KC_TRNS,
                                                                     RGB_HUI,                KC_TRNS,
@@ -238,7 +228,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
              KC_F1,   KC_K,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
              KC_TAB,  KC_G,    KC_A,    KC_S,    KC_D,    KC_F,                                      KC_I,    KC_O,    KC_NO,   KC_NO,   KC_NO,   KC_NO,
              KC_LCTL, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_TRNS,            TG(_GAMEPAD), KC_N,    KC_M,    KC_NO,   KC_NO,   KC_NO,   KC_NO,
-             KC_G,    KC_U,    KC_I,    KC_Y,    KC_T,                                                        KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_NO,
+             KC_GRV,   KC_U,    KC_I,    KC_Y,    KC_T,                                                        KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_NO,
                                                           KC_O,    KC_P,                    KC_HYPR, MAGIC_TOGGLE_NKRO,
                                                                    KC_LGUI,                 KC_NO,
                                                  KC_V,    KC_SPC,  KC_H,                    KC_PGDN, KC_DEL,  KC_ENTER
@@ -309,7 +299,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
             ),
 
 };
-
+#else // KEYBOARD_ergodox_ez
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_QWERTY] =  LAYOUT_ergodox_wrapper(KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, OSL(_MOUS), KC_TAB, _________________QWERTY_L1_________________, TG(_DIABLO), KC_BSPC, _________________QWERTY_L2_________________, KC_MLSF, _________________QWERTY_L3_________________, TG(_GAMEPAD), LT(_SYMB, KC_GRV), ___________ERGODOX_BOTTOM_LEFT_____________, ALT_T(KC_APP), KC_LGUI, KC_HOME, KC_SPACE, KC_BSPC, KC_END, OSL(_MOUS), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(_DIABLO), _________________QWERTY_R1_________________, KC_BSLS, _________________QWERTY_R2_________________, GUI_T(KC_QUOT), TG(_GAMEPAD), _________________QWERTY_R3_________________, KC_MRSF, ___________ERGODOX_BOTTOM_RIGHT____________, TT(_SYMB), KC_RGUI, CTL_T(KC_ESCAPE), KC_PGUP, KC_PGDOWN, KC_DELETE, KC_ENTER),
+    [_COLEMAK] = LAYOUT_ergodox_wrapper(KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, OSL(_MOUS), KC_TAB, _________________COLEMAK_L1________________, TG(_DIABLO), KC_BSPC, _________________COLEMAK_L2________________, KC_MLSF, _________________COLEMAK_L3________________, TG(_GAMEPAD), LT(_SYMB, KC_GRV), ___________ERGODOX_BOTTOM_LEFT_____________, ALT_T(KC_APP), KC_LGUI, KC_HOME, KC_SPACE, KC_BSPC, KC_END, OSL(_MOUS), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(_DIABLO), _________________COLEMAK_R1________________, KC_BSLS, _________________COLEMAK_R2________________, GUI_T(KC_QUOT), TG(_GAMEPAD), _________________COLEMAK_R3________________, KC_MRSF, ___________ERGODOX_BOTTOM_RIGHT____________, TT(_SYMB), KC_RGUI, CTL_T(KC_ESCAPE), KC_PGUP, KC_PGDOWN, KC_DELETE, KC_ENTER),
+    [_DVORAK] =  LAYOUT_ergodox_wrapper(KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, OSL(_MOUS), KC_TAB, _________________DVORAK_L1_________________, TG(_DIABLO), KC_BSPC, _________________DVORAK_L2_________________, KC_MLSF, _________________DVORAK_L3_________________, TG(_GAMEPAD), LT(_SYMB, KC_GRV), ___________ERGODOX_BOTTOM_LEFT_____________, ALT_T(KC_APP), KC_LGUI, KC_HOME, KC_SPACE, KC_BSPC, KC_END, OSL(_MOUS), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, TG(_DIABLO), _________________DVORAK_R1_________________, KC_SLSH, _________________DVORAK_R2_________________, GUI_T(KC_MINS), TG(_GAMEPAD), _________________DVORAK_R3_________________, KC_MRSF, ___________ERGODOX_BOTTOM_RIGHT____________, TT(_SYMB), KC_RGUI, CTL_T(KC_ESCAPE), KC_PGUP, KC_PGDOWN, KC_DELETE, KC_ENTER),
+    [_WORKMAN] = LAYOUT_ergodox_wrapper(KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, OSL(_MOUS), KC_TAB, _________________WORKMAN_L1________________, TG(_DIABLO), KC_BSPC, _________________WORKMAN_L2________________, KC_MLSF, _________________WORKMAN_L3________________, TG(_GAMEPAD), LT(_SYMB, KC_GRV), ___________ERGODOX_BOTTOM_LEFT_____________, ALT_T(KC_APP), KC_LGUI, KC_HOME, KC_SPACE, KC_BSPC, KC_END, OSL(_MOUS), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, TG(_DIABLO), _________________WORKMAN_R1________________, KC_BSLS, _________________WORKMAN_R2________________, GUI_T(KC_QUOT), TG(_GAMEPAD), _________________WORKMAN_R3________________, KC_MRSF, ___________ERGODOX_BOTTOM_RIGHT____________, TT(_SYMB), KC_RGUI, CTL_T(KC_ESCAPE), KC_PGUP, KC_PGDOWN, KC_DELETE, KC_ENTER),
+    [_MODS] =    LAYOUT_ergodox(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+    [_SYMB] =    LAYOUT_ergodox(EPRM, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, TG(_MODS), KC_RESET, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_WORKMAN, KC_MAKE, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRAVE, VRSN, KC_PERC, KC_CIRC, KC_LBRACKET, KC_RBRACKET, KC_TILD, KC_COLEMAK, KC_TRNS, KC_AMPR, KC_ASTR, KC_COLN, KC_SCOLON, RGB_SMOD, KC_RGB_T, RGB_HUI, RGB_M_R, RGB_M_SW, RGB_HUD, KC_QWERTY, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_DVORAK, KC_KP_PLUS, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_ASTERISK, KC_F12, KC_KP_MINUS, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_SLASH, KC_PSCREEN, KC_COLEMAK, KC_NUMLOCK, KC_KP_1, KC_KP_2, KC_KP_3, KC_EQUAL, KC_PAUSE, KC_KP_0, KC_KP_0, KC_KP_DOT, KC_KP_ENTER, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_KP_DOT, KC_KP_0, KC_KP_ENTER),
+    [_GAMEPAD] = LAYOUT_ergodox(KC_ESC, KC_TRNS, KC_TRNS, KC_TRNS, HYPR(KC_D), HYPR(KC_Q), HYPR(KC_GRV), KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_F1, KC_K, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TAB, KC_G, KC_A, KC_S, KC_D, KC_F, KC_I, KC_O, KC_NO, KC_NO, KC_NO, KC_NO, KC_LCTL, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_TRNS, TG(_GAMEPAD), KC_N, KC_M, KC_NO, KC_NO, KC_NO, KC_NO, KC_GRV, KC_U, KC_I, KC_Y, KC_T, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO, KC_O, KC_P, KC_HYPR, MAGIC_TOGGLE_NKRO, KC_LGUI, KC_NO, KC_V, KC_SPC, KC_H, KC_PGDN, KC_DEL, KC_ENTER),
+    [_DIABLO] =  LAYOUT_ergodox(KC_ESC, KC_V, KC_D, KC_LALT, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_TAB, KC_S, KC_I, KC_F, KC_M, KC_T, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_Q, KC_1, KC_2, KC_3, KC_4, KC_G, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LCTL, KC_D3_1, KC_D3_2, KC_D3_3, KC_D3_4, KC_Z, KC_NO, KC_NO, KC_N, KC_M, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_L, KC_J, KC_NO, KC_NO, KC_F, KC_NO, SFT_T(KC_SPACE), ALT_T(KC_Q), KC_DIABLO_CLEAR, KC_PGDN, KC_DEL, KC_ENT),
+    [_MOUS] =    LAYOUT_ergodox(KC_NO, KC_SEC1, KC_SEC2, KC_SEC3, KC_SEC4, KC_SEC5, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_U, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_NO, KC_NO, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_U, KC_NO, KC_BTN1, KC_BTN2, KC_WH_D, KC_BTN3, KC_BTN4, KC_BTN5),
+};
+#endif // KEYBOARD_ergodox_ez
 
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
 
@@ -327,8 +329,6 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
   return true;
 }
 
-
-
 void matrix_init_keymap(void) { // Runs boot tasks for keyboard
 };
 

layouts/community/ergodox/drashna/notes.txt

@@ -0,0 +1,6 @@
+Pins used by Ergodox EZ
+
+Column Pins:  F0  F1  F4  F5  F6  F7
+Row Pins   :  B0  B1  B2  B3  D2  D3  C6
+LEDs       :  D6  B5  B6  B7
+:

layouts/community/ergodox/drashna/rules.mk

@@ -1,7 +1,9 @@
 TAP_DANCE_ENABLE  = yes
 SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
 COMMAND_ENABLE    = yes  # Commands for debug and configuration
-RGBLIGHT_ENABLE   = yes
+ifeq ($(strip $(KEYBOARD)), ergodox_ez)
+  RGBLIGHT_ENABLE   = yes
+endif
 CONSOLE_ENABLE    = no
 BOOTMAGIC_ENABLE  = yes
 

layouts/community/ortho_4x12/talljoe/config.h

@@ -0,0 +1,22 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include QMK_KEYBOARD_CONFIG_H
+#define SPACE_COUNT 3
+
+#define LAYOUT(                                                                     \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
+    K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
+)                                                                                   \
+LAYOUT_ortho_4x12(                                              \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+    K40, K41, K0D, K42, K44, K45, K45, K46, K48, K49, K4B, K4C  \
+)
+
+
+#endif //CONFIG_USER_H

layouts/community/ortho_4x12/talljoe/keymap.c

@@ -0,0 +1 @@
+// This space intentionally left blank

quantum/process_keycode/process_audio.c

@@ -10,45 +10,7 @@ float voice_change_song[][2] = VOICE_CHANGE_SONG;
     #define PITCH_STANDARD_A 440.0f
 #endif
 
-#ifdef AUDIO_CLICKY
-#ifdef AUDIO_CLICKY_ON
-bool clicky_enable = true;
-#else
-bool clicky_enable = false;
-#endif
-#ifndef AUDIO_CLICKY_FREQ_DEFAULT
-#define AUDIO_CLICKY_FREQ_DEFAULT 440.0f
-#endif
-#ifndef AUDIO_CLICKY_FREQ_MIN
-#define AUDIO_CLICKY_FREQ_MIN 65.0f
-#endif
-#ifndef AUDIO_CLICKY_FREQ_MAX
-#define AUDIO_CLICKY_FREQ_MAX 1500.0f
-#endif
-#ifndef AUDIO_CLICKY_FREQ_FACTOR
-#define AUDIO_CLICKY_FREQ_FACTOR 1.18921f
-#endif
-#ifndef AUDIO_CLICKY_FREQ_RANDOMNESS
-#define AUDIO_CLICKY_FREQ_RANDOMNESS 0.05f
-#endif
-
-float clicky_freq = AUDIO_CLICKY_FREQ_DEFAULT;
-float clicky_song[][2]  = {{AUDIO_CLICKY_FREQ_DEFAULT, 3}, {AUDIO_CLICKY_FREQ_DEFAULT, 1}}; // 3 and 1 --> durations
 
-#ifndef NO_MUSIC_MODE
-extern bool music_activated;
-extern bool midi_activated;
-#endif
-
-void clicky_play(void) {
-#ifndef NO_MUSIC_MODE
-  if (music_activated || midi_activated) return;
-#endif
-  clicky_song[0][0] = 2.0f * clicky_freq * (1.0f + AUDIO_CLICKY_FREQ_RANDOMNESS * ( ((float)rand()) / ((float)(RAND_MAX)) ) );
-  clicky_song[1][0] = clicky_freq * (1.0f + AUDIO_CLICKY_FREQ_RANDOMNESS * ( ((float)rand()) / ((float)(RAND_MAX)) ) );
-  PLAY_SONG(clicky_song);
-}
-#endif
 
 static float compute_freq_for_midi_note(uint8_t note)
 {
@@ -89,33 +51,6 @@ bool process_audio(uint16_t keycode, keyrecord_t *record) {
         return false;
     }
 
-#ifdef AUDIO_CLICKY
-    if (keycode == CLICKY_TOGGLE && record->event.pressed) { clicky_enable = !clicky_enable; }
-
-    if (keycode == CLICKY_RESET && record->event.pressed) { clicky_freq = AUDIO_CLICKY_FREQ_DEFAULT; }
-
-    if (keycode == CLICKY_UP && record->event.pressed) {
-      float new_freq = clicky_freq * AUDIO_CLICKY_FREQ_FACTOR;
-      if (new_freq < AUDIO_CLICKY_FREQ_MAX) {
-        clicky_freq = new_freq;
-      }
-    }
-    if (keycode == CLICKY_TOGGLE && record->event.pressed) {
-      float new_freq = clicky_freq / AUDIO_CLICKY_FREQ_FACTOR;
-      if (new_freq > AUDIO_CLICKY_FREQ_MIN) {
-        clicky_freq = new_freq;
-      }
-      }
-
-
-    if ( (clicky_enable && keycode != CLICKY_TOGGLE) || (!clicky_enable && keycode == CLICKY_TOGGLE) ) {
-      if (record->event.pressed) {
-        stop_all_notes();
-        clicky_play();;
-      }
-    }
-#endif // AUDIO_CLICKY
-
     return true;
 }
 

quantum/process_keycode/process_clicky.c

@@ -0,0 +1,72 @@
+#include "audio.h"
+#include "process_clicky.h"
+
+#ifdef AUDIO_CLICKY
+
+#ifdef AUDIO_CLICKY_ON
+bool clicky_enable = true;
+#else // AUDIO_CLICKY_ON
+bool clicky_enable = false;
+#endif // AUDIO_CLICKY_ON
+#ifndef AUDIO_CLICKY_FREQ_DEFAULT
+#define AUDIO_CLICKY_FREQ_DEFAULT 440.0f
+#endif // !AUDIO_CLICKY_FREQ_DEFAULT
+#ifndef AUDIO_CLICKY_FREQ_MIN
+#define AUDIO_CLICKY_FREQ_MIN 65.0f
+#endif // !AUDIO_CLICKY_FREQ_MIN
+#ifndef AUDIO_CLICKY_FREQ_MAX
+#define AUDIO_CLICKY_FREQ_MAX 1500.0f
+#endif // !AUDIO_CLICKY_FREQ_MAX
+#ifndef AUDIO_CLICKY_FREQ_FACTOR
+#define AUDIO_CLICKY_FREQ_FACTOR 1.18921f
+#endif // !AUDIO_CLICKY_FREQ_FACTOR
+#ifndef AUDIO_CLICKY_FREQ_RANDOMNESS
+#define AUDIO_CLICKY_FREQ_RANDOMNESS 0.05f
+#endif // !AUDIO_CLICKY_FREQ_RANDOMNESS
+
+float clicky_freq = AUDIO_CLICKY_FREQ_DEFAULT;
+float clicky_song[][2]  = {{AUDIO_CLICKY_FREQ_DEFAULT, 3}, {AUDIO_CLICKY_FREQ_DEFAULT, 1}}; // 3 and 1 --> durations
+
+#ifndef NO_MUSIC_MODE
+extern bool music_activated;
+extern bool midi_activated;
+#endif // !NO_MUSIC_MODE
+
+void clicky_play(void) {
+#ifndef NO_MUSIC_MODE
+  if (music_activated || midi_activated) return;
+#endif // !NO_MUSIC_MODE
+  clicky_song[0][0] = 2.0f * clicky_freq * (1.0f + AUDIO_CLICKY_FREQ_RANDOMNESS * ( ((float)rand()) / ((float)(RAND_MAX)) ) );
+  clicky_song[1][0] = clicky_freq * (1.0f + AUDIO_CLICKY_FREQ_RANDOMNESS * ( ((float)rand()) / ((float)(RAND_MAX)) ) );
+  PLAY_SONG(clicky_song);
+}
+
+bool process_clicky(uint16_t keycode, keyrecord_t *record) {
+    if (keycode == CLICKY_TOGGLE && record->event.pressed) { clicky_enable = !clicky_enable; }
+
+    if (keycode == CLICKY_RESET && record->event.pressed) { clicky_freq = AUDIO_CLICKY_FREQ_DEFAULT; }
+
+    if (keycode == CLICKY_UP && record->event.pressed) {
+      float new_freq = clicky_freq * AUDIO_CLICKY_FREQ_FACTOR;
+      if (new_freq < AUDIO_CLICKY_FREQ_MAX) {
+        clicky_freq = new_freq;
+      }
+    }
+    if (keycode == CLICKY_TOGGLE && record->event.pressed) {
+      float new_freq = clicky_freq / AUDIO_CLICKY_FREQ_FACTOR;
+      if (new_freq > AUDIO_CLICKY_FREQ_MIN) {
+        clicky_freq = new_freq;
+      }
+    }
+
+
+    if ( clicky_enable ) {
+      if (record->event.pressed) {
+        stop_all_notes();
+        clicky_play();;
+      }
+    }
+    return true;
+}
+
+#endif //AUDIO_CLICKY

quantum/process_keycode/process_clicky.h

@@ -0,0 +1,7 @@
+#ifndef PROCESS_CLICKY_H
+#define PROCESS_CLICKY_H
+
+void clicky_play(void);
+bool process_clicky(uint16_t keycode, keyrecord_t *record);
+
+#endif

quantum/quantum.c

@@ -226,6 +226,9 @@ bool process_record_quantum(keyrecord_t *record) {
     // Must run first to be able to mask key_up events.
     process_key_lock(&keycode, record) &&
   #endif
+  #if defined(AUDIO_ENABLE) && defined(AUDIO_CLICKY)
+      process_clicky(keycode, record) &&
+  #endif //AUDIO_CLICKY
     process_record_kb(keycode, record) &&
   #if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
     process_midi(keycode, record) &&
@@ -236,7 +239,7 @@ bool process_record_quantum(keyrecord_t *record) {
   #ifdef STENO_ENABLE
     process_steno(keycode, record) &&
   #endif
-  #if ( defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))) && !defined(NO_MUSIC_MODE) 
+  #if ( defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))) && !defined(NO_MUSIC_MODE)
     process_music(keycode, record) &&
   #endif
   #ifdef TAP_DANCE_ENABLE
@@ -777,12 +780,14 @@ void set_single_persistent_default_layer(uint8_t default_layer) {
   default_layer_set(1U<<default_layer);
 }
 
+uint32_t update_tri_layer_state(uint32_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  uint32_t mask12 = (1UL << layer1) | (1UL << layer2);
+  uint32_t mask3 = 1UL << layer3;
+  return (state & mask12) == mask12 ? (state | mask3) : (state & ~mask3);
+}
+
 void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+  layer_state_set(update_tri_layer_state(layer_state, layer1, layer2, layer3));
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
 }
 
 void tap_random_base64(void) {

quantum/quantum.h

@@ -57,6 +57,9 @@ extern uint32_t default_layer_state;
 #ifdef AUDIO_ENABLE
 	#include "audio.h"
  	#include "process_audio.h"
+  #ifdef AUDIO_CLICKY
+    #include "process_clicky.h"
+  #endif // AUDIO_CLICKY
 #endif
 
 #ifdef STENO_ENABLE
@@ -139,6 +142,7 @@ void send_char(char ascii_code);
 
 // For tri-layer
 void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
+uint32_t update_tri_layer_state(uint32_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3);
 
 void set_single_persistent_default_layer(uint8_t default_layer);
 

quantum/template/keymaps/default/keymap.c

@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "%KEYBOARD%.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT( /* Base */

readme.md

@@ -7,11 +7,13 @@
 [![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
 [![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
 
-This is a keyboard firmware based on the [tmk\_keyboard firmware](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR and ARM controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/).
+This is a keyboard firmware based on the [tmk\_keyboard firmware](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR and ARM controllers, and more specifically, the [OLKB product line](https://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/).
 
-## Official website
+## Documentation
 
-[http://qmk.fm](http://qmk.fm) is the official website of QMK, where you can find links to this page, the documentation, and the keyboards supported by QMK.
+* [See the official documentation on docs.qmk.fm](https://docs.qmk.fm)
+
+The docs are hosted on [Gitbook](https://www.gitbook.com/book/qmk/firmware/details) and [GitHub](/docs/) (they are synced). You can request changes by making a fork and [pull request](https://github.com/qmk/qmk_firmware/pulls), or by clicking the "suggest an edit" link on any page of the docs.
 
 ## Supported Keyboards
 
@@ -27,6 +29,6 @@ The project also includes community support for [lots of other keyboards](/keybo
 
 QMK is developed and maintained by Jack Humbert of OLKB with contributions from the community, and of course, [Hasu](https://github.com/tmk). The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/jackhumbert), the Ergodox EZ by [Erez Zukerman](https://github.com/ezuk), and the Clueboard by [Zach White](https://github.com/skullydazed).
 
-## Documentation
+## Official website
 
-[https://docs.qmk.fm](https://docs.qmk.fm) is hosted on [Gitbook](https://www.gitbook.com/book/qmk/firmware/details) and [GitHub](/docs/) (they are synced). You can request changes by making a fork and [pull request](https://github.com/qmk/qmk_firmware/pulls), or by clicking the "suggest an edit" link on any page of the Docs.
+[http://qmk.fm](http://qmk.fm) is the official website of QMK, where you can find links to this page, the documentation, and the keyboards supported by QMK.

users/drashna/config.h

@@ -4,6 +4,7 @@
 
 #ifdef AUDIO_ENABLE
 #define AUDIO_CLICKY
+#define AUDIO_CLICKY_ON
 #define STARTUP_SONG SONG(E1M1_DOOM)
 #define GOODBYE_SONG  SONG(SONIC_RING)
 #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
@@ -16,7 +17,7 @@
 #ifdef RGBLIGHT_ENABLE
   #ifndef KEYBOARD_ergodox_ez
     #define RGBLIGHT_SLEEP
-  #endif
+  #endif // !KEYBOARD_ergodox_ez
 #endif // RGBLIGHT_ENABLE
 
 
@@ -51,8 +52,8 @@
 
 #ifdef TAPPING_TERM
 #undef TAPPING_TERM
-#endif
+#endif // TAPPING_TERM
-#define TAPPING_TERM 160
+#define TAPPING_TERM 176
 
 
 // Disable action_get_macro and fn_actions, since we don't use these

users/drashna/drashna.c

@@ -41,8 +41,13 @@ float fauxclicky_pressed[][2]             = SONG(S__NOTE(_A6)); // change to you
 float fauxclicky_released[][2]             = SONG(S__NOTE(_A6)); // change to your tastes
 #endif // FAUXCLICKY_ENABLE
 
+float tone_copy[][2]            = SONG(SCROLL_LOCK_ON_SOUND);
+float tone_paste[][2]           = SONG(SCROLL_LOCK_OFF_SOUND);
+
+
 bool faux_click_enabled = false;
 bool is_overwatch = false;
+static uint16_t copy_paste_timer;
 #ifdef RGBLIGHT_ENABLE
 bool rgb_layer_change = true;
 #endif
@@ -198,17 +203,21 @@ void matrix_scan_user(void) {
   matrix_scan_keymap();
 }
 
+void tap(uint16_t keycode){
+    register_code(keycode);
+    unregister_code(keycode);
+};
+
 // This block is for all of the gaming macros, as they were all doing
 // the same thing, but with differring text sent.
 bool send_game_macro(const char *str, keyrecord_t *record, bool override) {
   if (!record->event.pressed || override) {
     clear_keyboard();
-    register_code(is_overwatch ? KC_BSPC : KC_ENTER);
+    tap(is_overwatch ? KC_BSPC : KC_ENTER);
-    unregister_code(is_overwatch ? KC_BSPC : KC_ENTER);
     wait_ms(50);
     send_string(str);
-    register_code(KC_ENTER);
+    wait_ms(50);
-    unregister_code(KC_ENTER);
+    tap(KC_ENTER);
   }
   if (override) wait_ms(3000);
   return false;
@@ -402,6 +411,56 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     }
     return true; break;
 #endif // RGBLIGHT_ENABLE
+
+
+  case KC_CCCV:                                    // One key copy/paste
+    if(record->event.pressed){
+      copy_paste_timer = timer_read();
+    } else {
+      if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) {   // Hold, copy
+        register_code(KC_LCTL);
+        tap(KC_C);
+        unregister_code(KC_LCTL);
+#ifdef AUDIO_ENABLE
+        PLAY_SONG(tone_copy);
+#endif
+      } else {                                // Tap, paste
+        register_code(KC_LCTL);
+        tap(KC_V);
+        unregister_code(KC_LCTL);
+#ifdef AUDIO_ENABLE
+        PLAY_SONG(tone_paste);
+#endif
+      }
+    }
+    return false;
+    break;
+
+#ifdef UNICODE_ENABLE
+  case UC_FLIP: // (╯°□°)╯ ︵ ┻━┻
+    if (record->event.pressed) {
+      register_code(KC_RSFT);
+      tap(KC_9);
+      unregister_code(KC_RSFT);
+      process_unicode((0x256F | QK_UNICODE), record); // Arm
+      process_unicode((0x00B0 | QK_UNICODE), record); // Eye
+      process_unicode((0x25A1 | QK_UNICODE), record); // Mouth
+      process_unicode((0x00B0 | QK_UNICODE), record); // Eye
+      register_code(KC_RSFT);
+      tap(KC_0);
+      unregister_code(KC_RSFT);
+      process_unicode((0x256F | QK_UNICODE), record); // Arm
+      tap(KC_SPC);
+      process_unicode((0x0361 | QK_UNICODE), record); // Flippy
+      tap(KC_SPC);
+      process_unicode((0x253B | QK_UNICODE), record); // Table
+      process_unicode((0x2501 | QK_UNICODE), record); // Table
+      process_unicode((0x253B | QK_UNICODE), record); // Table
+    }
+    return false;
+    break;
+#endif // UNICODE_ENABLE
+
   }
   return process_record_keymap(keycode, record);
 }
@@ -413,6 +472,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 uint32_t layer_state_set_user(uint32_t state) {
 #ifdef RGBLIGHT_ENABLE
   uint8_t default_layer = eeconfig_read_default_layer();
+
   if (rgb_layer_change) {
     switch (biton32(state)) {
     case _NAV:

users/drashna/drashna.h

@@ -20,25 +20,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 // Define layer names
-#define _QWERTY 0
+enum userspace_layers {
-#define _NUMLOCK 0
+  _QWERTY = 0,
-#define _COLEMAK 1
+  _NUMLOCK = 0,
-#define _DVORAK 2
+  _COLEMAK,
-#define _WORKMAN 3
+  _DVORAK,
-#define _MODS 4
+  _WORKMAN,
-//#define _MISC 5
+  _MODS,
-#define _NAV 6
+  _NAV,
-#define _COVECUBE 7
+  _COVECUBE,
-#define _SYMB 8
+  _SYMB,
-#define _GAMEPAD 9
+  _GAMEPAD,
-#define _DIABLO 10
+  _DIABLO,
-#define _MOUS 11
+  _MOUS,
-#define _MACROS 12
+  _MACROS,
-#define _MEDIA 13
+  _MEDIA,
-#define _LOWER 14
+  _LOWER,
-#define _RAISE 15
+  _RAISE,
-#define _ADJUST 16
+  _ADJUST,
-
+};
 
 //define modifiers
 #define MODS_SHIFT_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
@@ -83,6 +83,10 @@ enum userspace_custom_keycodes {
   KC_SECRET_3,
   KC_SECRET_4,
   KC_SECRET_5,
+  KC_CCCV,
+#ifdef UNICODE_ENABLE
+  UC_FLIP,
+#endif //UNICODE_ENABLE
   NEW_SAFE_RANGE //use "NEWPLACEHOLDER for keymap specific codes
 };
 
@@ -107,6 +111,72 @@ enum {
 };
 #endif // TAP_DANCE_ENABLE
 
+#ifdef UNICODEMAP_ENABLE
+
+/* use X(n) to call the  */
+
+
+enum unicode_name {
+  THINK, // thinking face 🤔
+  GRIN, // grinning face 😊
+  SMRK, // smirk 😏
+  WEARY, // good shit 😩
+  UNAMU, // unamused 😒
+
+  SNEK, // snke 🐍
+  PENGUIN, // 🐧
+  DRAGON, // 🐉
+  MONKEY, // 🐒
+  CHICK, // 🐥
+
+  OKOK, // 👌
+  EFFU, // 🖕
+  INUP, // 👆
+  THUP, // 👍
+  THDN, // 👎
+
+  BBB, // dat B 🅱
+  POO, // poop 💩
+  HUNDR, // 100 💯
+  EGGPL, // EGGPLANT 🍆
+  WATER, // wet 💦
+  TUMBLER, // 🥃
+
+  LIT, // fire 🔥
+  IRONY, // ‽
+  DEGREE, // °
+};
+
+
+const uint32_t PROGMEM unicode_map[] = {
+  [THINK]     = 0x1F914,
+  [GRIN]      = 0x1F600,
+  [BBB]       = 0x1F171,
+  [POO]       = 0x1F4A9,
+  [HUNDR]     = 0x1F4AF,
+  [SMRK]      = 0x1F60F,
+  [WEARY]     = 0x1F629,
+  [EGGPL]     = 0x1F346,
+  [WATER]     = 0x1F4A6,
+  [LIT]       = 0x1F525,
+  [UNAMU]     = 0x1F612,
+  [SNEK]      = 0x1F40D,
+  [PENGUIN]   = 0x1F427,
+  [BOAR]      = 0x1F417,
+  [MONKEY]    = 0x1F412,
+  [CHICK]     = 0x1F425,
+  [DRAGON]    = 0x1F409,
+  [OKOK]      = 0x1F44C,
+  [EFFU]      = 0x1F595,
+  [INUP]      = 0x1F446,
+  [THDN]      = 0x1F44E,
+  [THUP]      = 0x1F44D,
+  [TUMBLER]   = 0x1F943,
+  [IRONY]     = 0x0203D,
+  [DEGREE]    = 0x000B0,
+ };
+
+#endif //UNICODEMAP_ENABLE
 
 // Custom Keycodes for Diablo 3 layer
 // But since TD() doesn't work when tap dance is disabled
@@ -199,13 +269,13 @@ enum {
 #define _________________DVORAK_R3_________________        KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z)
 
 
-#define _________________WORKMAN_L1________________       KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y
+#define _________________WORKMAN_L1________________       KC_Q,    KC_D,    KC_R,   KC_W,     KC_B
-#define _________________WORKMAN_L2________________       KC_A,    KC_O,    KC_E,   KC_U,     KC_I
+#define _________________WORKMAN_L2________________       KC_A,    KC_S,    KC_H,   KC_T,     KC_G
-#define _________________WORKMAN_L3________________ CTL_T(KC_SCLN),KC_Q,    KC_J,   KC_K,     KC_X
+#define _________________WORKMAN_L3________________ CTL_T(KC_Z),   KC_X,    KC_M,   KC_C,     KC_V
 
-#define _________________WORKMAN_R1________________       KC_F,    KC_G,    KC_C,    KC_R,    KC_L
+#define _________________WORKMAN_R1________________       KC_J,    KC_F,    KC_U,    KC_P,    KC_SCLN
-#define _________________WORKMAN_R2________________       KC_D,    KC_H,    KC_T,    KC_N,    KC_S
+#define _________________WORKMAN_R2________________       KC_Y,    KC_N,    KC_E,    KC_O,    KC_I
-#define _________________WORKMAN_R3________________       KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z)
+#define _________________WORKMAN_R3________________       KC_K,    KC_L,    KC_COMM, KC_DOT,    CTL_T(KC_SLASH)
 
 
 #define _________________NORMAN_L1_________________       KC_Q,    KC_W,    KC_D,    KC_F,    KC_K
@@ -226,4 +296,9 @@ enum {
 #define ___________ERGODOX_BOTTOM_RIGHT____________       KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 
 
+#define __________________ERGODOX_THUMB_CLUSTER_____________________       ALT_T(KC_APP), KC_LGUI,                 KC_RGUI, CTL_T(KC_ESCAPE), \
+                                                                                              KC_HOME,                 KC_PGUP, \
+                                                                            KC_SPACE,KC_BSPC, KC_END,                  KC_PGDN, KC_DEL,  KC_ENTER
+
+
 #endif

users/drashna/rules.mk

@@ -2,4 +2,6 @@
 SRC += drashna.c
 EXTRAFLAGS        += -flto
 
-
+ifeq ($(strip $(NO_SECRETS)), yes)
+    OPT_DEFS += -DNO_SECRETS
+endif

users/talljoe/config.h

@@ -0,0 +1,9 @@
+#ifndef USERSPACE_CONFIG_H
+#define USERSPACE_CONFIG_H
+
+#define PREVENT_STUCK_MODIFIERS
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#define RESET_LAYER 15
+
+#endif // !USERSPACE_CONFIG_H

users/talljoe/readme.md

@@ -0,0 +1,7 @@
+Copyright 2018 Joe Wasson <info@talljoe.com> @talljoe
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

users/talljoe/rules.mk

@@ -0,0 +1,3 @@
+SRC += talljoe.c
+
+EXTRAFLAGS+=-flto

users/talljoe/talljoe.c

@@ -0,0 +1,124 @@
+#include QMK_KEYBOARD_H
+
+#include "talljoe.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+      KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_ESC,
+      KC_TAB , KC_Q,    KC_W,    KC_E,    KC_R,    KC_T   , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,
+      US_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G   , KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, US_QUOT,          US_ENT ,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B   , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, MO_ADJ ,
+      KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC2, KC_SPC1, KC_SPC3,                   KC_RALT, KC_APP , KC_RCTL, KC_PTT ),
+  [_WORKMAN] = LAYOUT(
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, KC_Q   , KC_D   , KC_R   , KC_W   , KC_B   , KC_J   , KC_F   , KC_U   , KC_P   , KC_SCLN, _______, _______, _______,
+      _______, KC_A   , KC_S   , KC_H   , KC_T   , KC_G   , KC_Y   , KC_N   , KC_E   , KC_O   , KC_I   , _______,          _______,
+      _______, KC_Z   , KC_X   , KC_M   , KC_C   , KC_V   , KC_K   , KC_L   , KC_COMM, KC_DOT , KC_SLSH,          _______, _______,
+      _______, _______, _______,                   _______, _______, _______,                   _______, _______, _______, _______),
+  [_NORMAN] = LAYOUT(
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, KC_Q   , KC_W   , KC_D   , KC_F   , KC_K   , KC_J   , KC_U   , KC_R   , KC_L   , KC_SCLN, _______, _______, _______,
+      _______, KC_A   , KC_S   , KC_E   , KC_T   , KC_G   , KC_Y   , KC_N   , KC_I   , KC_O   , KC_H   , _______,          _______,
+      _______, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_P   , KC_M   , KC_COMM, KC_DOT , KC_SLSH,          _______, _______,
+      _______, _______, _______,                   _______, _______, _______,                   _______, _______, _______, _______),
+  [_DVORAK] = LAYOUT(
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______,
+      _______, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y   , KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL , _______,
+      _______, KC_A,    KC_O,    KC_E,    KC_U,    KC_I   , KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    US_MINS,          _______,
+      _______, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X   , KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,             _______, _______,
+      _______, _______, _______,                   _______, _______, _______,                   _______, _______, _______, _______),
+  [_COLMAK] = LAYOUT(
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G   , KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, _______, _______, _______,
+      _______, KC_A,    KC_R,    KC_S,    KC_T,    KC_D   , KC_H,    KC_N,    KC_E,    KC_I,    KC_O   , _______,          _______,
+      _______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B   , KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          _______, _______,
+      _______, _______, _______,                   _______, _______, _______,                   _______, _______, _______, _______),
+
+#ifdef ENABLE_GAME_LAYER
+  [_GAME] = LAYOUT(
+      KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV,
+      KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,
+      MO_NAV , KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT,          KC_ENT ,
+      KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH,          KC_RSFT, MO_ADJ ,
+      KC_LCTL, KC_PTT , KC_PGDN,                   KC_SPC , KC_SPC , KC_SPC ,                    KC_RALT, KC_APP , KC_RCTL, KC_PTT ),
+#endif
+  [_NAV] = LAYOUT(
+      KC_GRV , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+      KC_TAB , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_VOLU, KC_INS , KC_PGUP, KC_UP  , KC_PGDN, KC_BTN1, KC_BTN2, KC_BTN3, KC_DEL ,
+      US_CAPS, KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_MUTE, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END , KC_RCTL,          TG_ADJ ,
+      KC_LSFT, KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_VOLD, KC_END , KC_PGDN, KC_WBAK, KC_WFWD, KC_WREF,          KC_RSFT, XXXXXXX,
+      KC_LCTL, KC_LGUI, KC_LALT,                   NV_SPC2, NV_SPC1, NV_SPC3,                   KC_RALT, KC_RGUI, KC_RCTL, KC_PTT ),
+  [_NUM] = LAYOUT(
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+      KC_GRV , KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, XXXXXXX, KC_DEL ,
+      US_CAPS, KC_LCBR, KC_RCBR, KC_LPRN, KC_RPRN, KC_LBRC, KC_RBRC, KC_4,    KC_5,    KC_6,    KC_PPLS, KC_PENT,          XXXXXXX,
+      KC_LSFT, KC_EQL,  KC_PLUS, KC_BSLS, KC_PIPE, XXXXXXX, XXXXXXX, KC_1,    KC_2,    KC_3,    KC_PAST,          KC_PSLS, XXXXXXX,
+      KC_LCTL, KC_LGUI, KC_LALT,                   NM_SPC2, NM_SPC1, NM_SPC3,                   KC_PDOT, KC_PCMM, KC_RCTL, KC_PTT ),
+ // Adjust layer is on the split-shift key; or NAV+Enter (for non-split keyboards)
+  [_ADJUST] = LAYOUT(
+      MO_RST , FX(1)  , FX(2)  , FX(3)  , FX(4)  , FX(5)  , FX(6)  , FX(7)  , FX(8)  , FX(9)  , FX(10) , BR_DEC , BR_INC , XXXXXXX, MO_RST ,
+      XXXXXXX, H1_INC , S1_INC , H2_INC , S2_INC , EF_INC , RGB_HUI, RGB_SAI, RGB_MOD, RGB_M_P, DFAULTS, RGB_VAD, RGB_VAI, KC_DEL ,
+      XXXXXXX, H1_DEC , S1_DEC , H2_DEC , S2_DEC , EF_DEC , RGB_HUD, RGB_SAD, RGB_RMOD,RGB_M_K, RGB_M_B, RGB_M_G,          TG_ADJ ,
+      TG_NKRO, LY_QWER, LY_WORK, LY_NRMN, LY_DVRK, LY_CLMK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MAKE,          KC_CAPS, XXXXXXX,
+      MO_RST , AG_NORM, AG_SWAP,                   XXXXXXX, BL_TOGG, XXXXXXX,                   RGB_TOG, XXXXXXX, XXXXXXX, TG_GAME),
+  // To Reset hit FN + ` + Esc
+  [_RESET] = LAYOUT(
+      RESET  , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET  ,
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX,
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX, XXXXXXX,
+      RESET  , XXXXXXX, XXXXXXX,                   XXXXXXX, KC_SLEP, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX),
+};
+
+void matrix_scan_user(void) {
+  #ifdef KEYBOARD_gh60
+    if (IS_LAYER_ON(_GAME)) {
+      gh60_wasd_leds_on();
+    } else {
+      gh60_wasd_leds_off();
+    }
+  #endif
+}
+
+void matrix_init_user(void) {
+  if (!eeconfig_is_enabled()) {
+    eeconfig_init();
+  }
+}
+
+uint32_t default_layer_state_set_kb(uint32_t state) {
+  // persist changes to default layers
+  eeconfig_update_default_layer(state);
+  return state;
+}
+
+__attribute__ ((weak))
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+// If console is enabled, it will print the matrix position and status of each key pressed
+#ifdef CONSOLE_ENABLE
+  xprintf("KL: row: %u, column: %u, pressed: %u\n", record->event.key.row, record->event.key.col, record->event.pressed);
+#endif //CONSOLE_ENABLE
+
+  switch (keycode) {
+    case KC_MAKE:  // Compiles the firmware, and adds the flash command based on keyboard bootloader
+      if (!record->event.pressed) {
+        SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP
+
+  #if   defined(BOOTLOADER_HALFKAY)
+                    ":teensy"
+  #elif defined(BOOTLOADER_CATERINA)
+                    ":avrdude"
+  #else
+                    ":dfu"
+  #endif
+                    SS_TAP(X_ENTER));
+      }
+      return false;
+      break;
+  }
+  return process_record_keymap(keycode, record);
+}

users/talljoe/talljoe.h

@@ -0,0 +1,108 @@
+#ifndef USERSPACE
+#define USERSPACE
+
+#include "quantum.h"
+
+enum userspace_custom_keycodes {
+  KC_MAKE = SAFE_RANGE, // can always be here
+  DFAULTS,
+  TOGGLE_BACKLIGHT,
+  EFFECT,
+  EFFECT_END = EFFECT + 10
+};
+
+#ifndef RESET_LAYER
+#define RESET_LAYER 15
+#endif
+
+enum layers {
+    _BASE = 0,
+    _WORKMAN,
+    _NORMAN,
+    _DVORAK,
+    _COLMAK,
+    _GAME,
+    _NAV,
+    _NUM,
+    _ADJUST,
+    _RESET = RESET_LAYER,
+};
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define MO_NAV    MO(_NAV)
+#define MO_ADJ    MO(_ADJUST)
+#define MO_RST    MO(_RESET)
+#define TG_ADJ    TG(_ADJUST)
+#ifdef ENABLE_GAME_LAYER
+  #define TG_GAME TG(_GAME)
+#else
+  #define TG_GAME KC_NO
+#endif
+#define LY_QWER   DF(_BASE)
+#define LY_WORK   DF(_WORKMAN)
+#define LY_NRMN   DF(_NORMAN)
+#define LY_DVRK   DF(_DVORAK)
+#define LY_CLMK   DF(_COLMAK)
+#define TG_NKRO   MAGIC_TOGGLE_NKRO
+#define KC_PTT    KC_F24
+#define MS_MID    KC_MS_BTN3
+#define FX(x)     (EFFECT + x)
+
+#define US_CAPS   CTL_T(KC_ESC)
+#define US_QUOT   RCTL_T(KC_QUOT)
+#define US_MINS   RCTL_T(KC_QUOT)
+#define US_ENT    LT(_NUM, KC_ENT)
+
+#ifndef SPACE_COUNT
+  #define SPACE_COUNT 1
+#endif
+#if (SPACE_COUNT == 1)
+  #define KC_SPC1   LT(_NAV, KC_SPC)
+  #define KC_SPC2   XXXXXXX
+  #define KC_SPC3   XXXXXXX
+
+  #define NV_SPC1   _______
+  #define NV_SPC2   _______
+  #define NV_SPC3   _______
+
+  #define NM_SPC1   _______
+  #define NM_SPC2   _______
+  #define NM_SPC3   _______
+#elif (SPACE_COUNT == 3)
+  #define KC_SPC1   KC_BSPC
+  #define KC_SPC2   LT(_NUM,KC_ENT)
+  #define KC_SPC3   LT(_NAV,KC_SPC)
+
+  #define NV_SPC1   KC_SPC
+  #define NV_SPC2   C_S_T(KC_ENT)
+  #define NV_SPC3   KC_SPC
+
+  #define NM_SPC2   XXXXXXX
+  #define NM_SPC1   KC_SPC
+  #define NM_SPC3   KC_0
+#else
+  #error "Unsupported space count:" SPACE_COUNT
+#endif
+
+#ifndef ZEAL_RGB
+  #define BR_INC KC_NO
+  #define BR_DEC KC_NO
+  #define EF_INC KC_NO
+  #define EF_DEC KC_NO
+  #define ES_INC KC_NO
+  #define ES_DEC KC_NO
+  #define H1_INC KC_NO
+  #define H1_DEC KC_NO
+  #define S1_INC KC_NO
+  #define S1_DEC KC_NO
+  #define H2_INC KC_NO
+  #define H2_DEC KC_NO
+  #define S2_INC KC_NO
+  #define S2_DEC KC_NO
+  #define FN_MO13 KC_NO
+  #define FN_MO2 KC_NO
+#endif
+
+#endif