AppConfigHeaders: Move out the last of the demo/app configurations into new AppConfig.h header files.

Bootloaders/DFU/BootloaderDFU.h

@@ -49,18 +49,12 @@
 
 		#include "Descriptors.h"
 		#include "BootloaderAPI.h"
+		#include "Config/AppConfig.h"
 
 		#include <LUFA/Drivers/USB/USB.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
 
 	/* Macros: */
-		/** Configuration define. Define this token to true to case the bootloader to reject all memory commands
-		 *  until a memory erase has been performed. When used in conjunction with the lockbits of the AVR, this
-		 *  can protect the AVR's firmware from being dumped from a secured AVR. When false, memory operations are
-		 *  allowed at any time.
-		 */
-		#define SECURE_MODE              false
-
 		/** Major bootloader version number. */
 		#define BOOTLOADER_VERSION_MINOR 2
 

Bootloaders/DFU/BootloaderDFU.txt

@@ -140,10 +140,10 @@
  *   </tr>
  *   <tr>
  *    <td>SECURE_MODE</td>
- *    <td>BootloaderDFU.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>If defined to \c true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an
  *        erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from
- *        being dumped by unauthorized persons.</td>
+ *        being dumped by unauthorized persons. When false, all memory operations are allowed at any time.</td>
  *   </tr>
  *  </table>
  */

Bootloaders/DFU/Config/AppConfig.h

@@ -0,0 +1,48 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define SECURE_MODE              false
+
+#endif

Demos/Device/ClassDriver/AudioInput/AudioInput.c

@@ -94,7 +94,7 @@ void SetupHardware(void)
 	USB_Init();
 
 	/* Start the ADC conversion in free running mode */
-	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK);
+	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
 }
 
 /** ISR to handle the reloading of the data endpoint with the next sample. */

Demos/Device/ClassDriver/AudioInput/AudioInput.h

@@ -49,14 +49,9 @@
 		#include <LUFA/Drivers/USB/USB.h>
 
 		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
 
 	/* Macros: */
-		/** ADC channel number for the microphone input. */
-		#define MIC_IN_ADC_CHANNEL        2
-
-		/** ADC channel MUX mask for the microphone input. */
-		#define MIC_IN_ADC_MUX_MASK       ADC_CHANNEL2
-
 		/** Maximum audio sample value for the microphone input. */
 		#define SAMPLE_MAX_RANGE          0xFFFF
 

Demos/Device/ClassDriver/AudioInput/AudioInput.txt

@@ -72,6 +72,11 @@
  *    <td><b>Description:</b></td>
  *   </tr>
  *   <tr>
+ *    <td>MIC_IN_ADC_CHANNEL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ *   </tr>
+ *   <tr>
  *    <td>USE_TEST_TONE</td>
  *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed

Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h

@@ -43,6 +43,8 @@
 #ifndef _APP_CONFIG_H_
 #define _APP_CONFIG_H_
 
+	#define MIC_IN_ADC_CHANNEL               2
+
 	#define MICROPHONE_BIASED_TO_HALF_RAIL
 	#define USE_TEST_TONE
 

Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h

@@ -0,0 +1,48 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define GENERIC_REPORT_SIZE       8
+
+#endif

Demos/Device/ClassDriver/GenericHID/Descriptors.h

@@ -41,6 +41,8 @@
 
 		#include <LUFA/Drivers/USB/USB.h>
 		
+		#include "Config/AppConfig.h"
+
 	/* Type Defines: */
 		/** Type define for the device configuration descriptor structure. This must be defined in the
 		 *  application code, as the configuration descriptor contains several sub-descriptors which
@@ -63,9 +65,6 @@
 		/** Size in bytes of the Generic HID reporting endpoint. */
 		#define GENERIC_EPSIZE            8
 
-		/** Size in bytes of the Generic HID reports (including report ID byte). */
-		#define GENERIC_REPORT_SIZE       8
-
 	/* Function Prototypes: */
 		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
 		                                    const uint8_t wIndex,

Demos/Device/ClassDriver/GenericHID/GenericHID.h

@@ -44,6 +44,7 @@
 		#include <string.h>
 
 		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
 		
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>

Demos/Device/ClassDriver/GenericHID/GenericHID.txt

@@ -67,9 +67,9 @@
  *   </tr>
  *   <tr>
  *    <td>GENERIC_REPORT_SIZE</td>
- *    <td>Descriptors.h</td>
+ *    <td>AppConfig.h</td>
- *    <td>This token defines the size of the device reports, both sent and received. The value must be an
+ *    <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value 
- *        integer ranging from 1 to 255.</td>
+ *        must be an integer ranging from 1 to 255.</td>
  *   </tr>
  *  </table>
  */

Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h

@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define TOTAL_LUNS                1
+
+	#define DISK_READ_ONLY            false
+
+#endif

Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h

@@ -65,6 +65,9 @@
 		 */
 		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
 
+		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+		#define LUN_MEDIA_BLOCKS                    (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
 	/* Function Prototypes: */
 		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
 		                                  const uint32_t BlockAddress,

Demos/Device/ClassDriver/MassStorage/MassStorage.h

@@ -47,6 +47,7 @@
 
 		#include "Lib/SCSI.h"
 		#include "Lib/DataflashManager.h"
+		#include "Config/AppConfig.h"
 
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
@@ -68,15 +69,6 @@
 		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
 		#define LEDMASK_USB_BUSY          LEDS_LED2
 
-		/** Total number of logical drives within the device - must be non-zero. */
-		#define TOTAL_LUNS                1
-
-		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
-		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
-		/** Indicates if the disk is write protected or not. */
-		#define DISK_READ_ONLY            false
-
 	/* Function Prototypes: */
 		void SetupHardware(void);
 

Demos/Device/ClassDriver/MassStorage/MassStorage.txt

@@ -83,10 +83,15 @@
  *   </tr>
  *   <tr>
  *    <td>TOTAL_LUNS</td>
- *    <td>MassStorage.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
  *        this can be set to any positive non-zero amount.</td>
  *   </tr>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ *   </tr>
  *  </table>
  */
 

Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h

@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define TOTAL_LUNS                1
+
+	#define DISK_READ_ONLY            false
+
+#endif

Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h

@@ -63,6 +63,9 @@
 		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */
 		#define VIRTUAL_MEMORY_BLOCKS              (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
 
+		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
 	/* Function Prototypes: */
 		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
 		                                  const uint32_t BlockAddress,

Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h

@@ -50,6 +50,7 @@
 
 		#include "Lib/SCSI.h"
 		#include "Lib/DataflashManager.h"
+		#include "Config/AppConfig.h"
 
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/Joystick.h>
@@ -73,15 +74,6 @@
 		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
 		#define LEDMASK_USB_BUSY         LEDS_LED2
 
-		/** Total number of logical drives within the device - must be non-zero. */
-		#define TOTAL_LUNS               1
-
-		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
-		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
-		/** Indicates if the disk is write protected or not. */
-		#define DISK_READ_ONLY           false
-
 	/* Function Prototypes: */
 		void SetupHardware(void);
 

Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt

@@ -84,10 +84,14 @@
  *   </tr>
  *   <tr>
  *    <td>TOTAL_LUNS</td>
- *    <td>MassStorage.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
  *        this can be set to any positive non-zero amount.</td>
  *   </tr>
- *  </table>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ *   </tr>
  */
 

Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h

@@ -29,21 +29,26 @@
 */
 
 /** \file
- *  \brief Network Configuration Header File
+ *  \brief Application Configuration Header File
  *
- *  This header file is used to configure various portions of the
+ *  This is a header file which is be used to configure some of
- *  network stack used by the application.
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
  *
- *  For information on what each token does, refer to the LUFA
+ *  For information on what each token does, refer to the 
- *  manual section "Summary of Compile Tokens".
+ *  \ref Sec_Options section of the application documentation.
  */
 
-#ifndef _NETWORK_CONFIG_H_
+#ifndef _APP_CONFIG_H_
-#define _NETWORK_CONFIG_H_
+#define _APP_CONFIG_H_
 
 	#define CLIENT_IP_ADDRESS                { 10,     0,    0,    1}
 	#define SERVER_IP_ADDRESS                { 10,     0,    0,    2}
 
+	#define ADAPTER_MAC_ADDRESS              {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
+	#define SERVER_MAC_ADDRESS               {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
+
 	#define NO_DECODE_ETHERNET
 	#define NO_DECODE_ARP
 	#define NO_DECODE_IP

Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h

@@ -52,12 +52,6 @@
 		#include "IP.h"
 
 	/* Macros: */
-		/** Physical MAC address of the USB RNDIS network adapter. */
-		#define ADAPTER_MAC_ADDRESS              {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
-
-		/** Physical MAC address of the virtual server on the network. */
-		#define SERVER_MAC_ADDRESS               {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
-
 		/** Physical MAC address of the network broadcast address. */
 		#define BROADCAST_MAC_ADDRESS            {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
 

Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h

@@ -43,7 +43,7 @@
 		#include "EthernetProtocols.h"
 		#include "Ethernet.h"
 		#include "ProtocolDecoders.h"
-		#include "Config/NetworkConfig.h"
+		#include "Config/AppConfig.h"
 
 	/* Macros: */
 		/** Protocol IP address of the broadcast address. */

Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h

@@ -45,7 +45,7 @@
 
 		#include "EthernetProtocols.h"
 		#include "Ethernet.h"
-		#include "Config/NetworkConfig.h"
+		#include "Config/AppConfig.h"
 
 	/* Function Prototypes: */
 		void DecodeEthernetFrameHeader(void* InDataStart);

Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt

@@ -84,38 +84,58 @@
  *    <td><b>Description:</b></td>
  *   </tr>
  *   <tr>
+ *    <td>CLIENT_IP_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>SERVER_IP_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the IP address of the virtual server.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>ADAPTER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>SERVER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the MAC address of the virtual server on the network.</td>
+ *   </tr>
+ *   <tr>
  *    <td>NO_DECODE_ETHERNET</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_ARP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_IP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_ICMP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_TCP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_UDP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_DHCP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *  </table>

Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h

@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define TOTAL_LUNS                1
+
+	#define DISK_READ_ONLY            false
+
+#endif

Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h

@@ -65,6 +65,9 @@
 		 */
 		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
 
+		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
 	/* Function Prototypes: */
 		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
 		                                  const uint32_t BlockAddress,

Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h

@@ -47,6 +47,7 @@
 
 		#include "Lib/SCSI.h"
 		#include "Lib/DataflashManager.h"
+		#include "Config/AppConfig.h"
 
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
@@ -69,15 +70,6 @@
 		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
 		#define LEDMASK_USB_BUSY          LEDS_LED2
 
-		/** Total number of logical drives within the device - must be non-zero. */
-		#define TOTAL_LUNS                1
-
-		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
-		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
-		/** Indicates if the disk is write protected or not. */
-		#define DISK_READ_ONLY            false
-
 	/* Function Prototypes: */
 		void SetupHardware(void);
 		void CheckJoystickMovement(void);

Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt

@@ -77,10 +77,14 @@
  *   </tr>
  *   <tr>
  *    <td>TOTAL_LUNS</td>
- *    <td>MassStorage.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
  *        this can be set to any positive non-zero amount.</td>
  *   </tr>
- *  </table>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ *   </tr>
  */
 

Demos/Device/LowLevel/AudioInput/AudioInput.c

@@ -77,7 +77,7 @@ void SetupHardware(void)
 	USB_Init();
 
 	/* Start the ADC conversion in free running mode */
-	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK);
+	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
 }
 
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and

Demos/Device/LowLevel/AudioInput/AudioInput.h

@@ -52,12 +52,6 @@
 		#include <LUFA/Drivers/Peripheral/ADC.h>
 
 	/* Macros: */
-		/** ADC channel number for the microphone input. */
-		#define MIC_IN_ADC_CHANNEL        2
-
-		/** ADC channel MUX mask for the microphone input. */
-		#define MIC_IN_ADC_MUX_MASK       ADC_CHANNEL2
-
 		/** Maximum audio sample value for the microphone input. */
 		#define SAMPLE_MAX_RANGE          0xFFFF
 

Demos/Device/LowLevel/AudioInput/Config/AppConfig.h

@@ -43,6 +43,8 @@
 #ifndef _APP_CONFIG_H_
 #define _APP_CONFIG_H_
 
+	#define MIC_IN_ADC_CHANNEL               2
+
 	#define MICROPHONE_BIASED_TO_HALF_RAIL
 	#define USE_TEST_TONE
 

Demos/Device/LowLevel/GenericHID/Config/AppConfig.h

@@ -0,0 +1,48 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define GENERIC_REPORT_SIZE       8
+
+#endif

Demos/Device/LowLevel/GenericHID/Descriptors.h

@@ -41,6 +41,8 @@
 
 		#include <avr/pgmspace.h>
 
+		#include "Config/AppConfig.h"
+		
 	/* Type Defines: */
 		/** Type define for the device configuration descriptor structure. This must be defined in the
 		 *  application code, as the configuration descriptor contains several sub-descriptors which
@@ -67,9 +69,6 @@
 		/** Size in bytes of the Generic HID reporting endpoint. */
 		#define GENERIC_EPSIZE            8
 
-		/** Size in bytes of the Generic HID reports (including report ID byte). */
-		#define GENERIC_REPORT_SIZE       8
-
 	/* Function Prototypes: */
 		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
 		                                    const uint8_t wIndex,

Demos/Device/LowLevel/GenericHID/GenericHID.h

@@ -45,6 +45,7 @@
 		#include <string.h>
 
 		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
 		
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/USB/USB.h>

Demos/Device/LowLevel/GenericHID/GenericHID.txt

@@ -67,9 +67,9 @@
  *   </tr>
  *   <tr>
  *    <td>GENERIC_REPORT_SIZE</td>
- *    <td>Descriptors.h</td>
+ *    <td>AppConfig.h</td>
- *    <td>This token defines the size of the device reports, both sent and received. The value must be an
+ *    <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value 
- *        integer ranging from 1 to 255.</td>
+ *        must be an integer ranging from 1 to 255.</td>
  *   </tr>
  *  </table>
  */

Demos/Device/LowLevel/MassStorage/Config/AppConfig.h

@@ -0,0 +1,50 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define TOTAL_LUNS                1
+
+	#define DISK_READ_ONLY            false
+
+#endif

Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h

@@ -65,11 +65,6 @@
 		 */
 		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
 
-		/** Total number of Logical Units (drives) in the device. The total device capacity is shared equally between
-		 *  each drive - this can be set to any positive non-zero amount.
-		 */
-		#define TOTAL_LUNS                           1
-
 		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
 		#define LUN_MEDIA_BLOCKS                    (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
 

Demos/Device/LowLevel/MassStorage/MassStorage.h

@@ -46,6 +46,7 @@
 
 		#include "Lib/SCSI.h"
 		#include "Lib/DataflashManager.h"
+		#include "Config/AppConfig.h"
 
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/USB/USB.h>
@@ -68,9 +69,6 @@
 		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
 		#define LEDMASK_USB_BUSY           LEDS_LED2
 
-		/** Indicates if the disk is write protected or not. */
-		#define DISK_READ_ONLY            false
-
 	/* Global Variables: */
 		extern MS_CommandBlockWrapper_t  CommandBlock;
 		extern MS_CommandStatusWrapper_t CommandStatus;

Demos/Device/LowLevel/MassStorage/MassStorage.txt

@@ -83,10 +83,15 @@
  *   </tr>
  *   <tr>
  *    <td>TOTAL_LUNS</td>
- *    <td>MassStorage.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
  *        - this can be set to any positive non-zero amount.</td>
  *   </tr>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Indicates if the disk should be write protected or not.</td>
+ *   </tr>
  *  </table>
  */
 

Demos/Device/LowLevel/Mouse/Mouse.h

@@ -45,6 +45,7 @@
 		#include <string.h>
 
 		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
 
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/USB/USB.h>

Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h

@@ -29,21 +29,26 @@
 */
 
 /** \file
- *  \brief Network Configuration Header File
+ *  \brief Application Configuration Header File
  *
- *  This header file is used to configure various portions of the
+ *  This is a header file which is be used to configure some of
- *  network stack used by the application.
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
  *
- *  For information on what each token does, refer to the LUFA
+ *  For information on what each token does, refer to the 
- *  manual section "Summary of Compile Tokens".
+ *  \ref Sec_Options section of the application documentation.
  */
 
-#ifndef _NETWORK_CONFIG_H_
+#ifndef _APP_CONFIG_H_
-#define _NETWORK_CONFIG_H_
+#define _APP_CONFIG_H_
 
 	#define CLIENT_IP_ADDRESS                { 10,     0,    0,    1}
 	#define SERVER_IP_ADDRESS                { 10,     0,    0,    2}
 
+	#define ADAPTER_MAC_ADDRESS              {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
+	#define SERVER_MAC_ADDRESS               {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
+
 	#define NO_DECODE_ETHERNET
 	#define NO_DECODE_ARP
 	#define NO_DECODE_IP

Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h

@@ -50,12 +50,6 @@
 		#include "IP.h"
 
 	/* Macros: */
-		/** Physical MAC address of the USB RNDIS network adapter. */
-		#define ADAPTER_MAC_ADDRESS              {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
-
-		/** Physical MAC address of the virtual server on the network. */
-		#define SERVER_MAC_ADDRESS               {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
-
 		/** Physical MAC address of the network broadcast address. */
 		#define BROADCAST_MAC_ADDRESS            {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
 

Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h

@@ -43,8 +43,7 @@
 		#include "EthernetProtocols.h"
 		#include "Ethernet.h"
 		#include "ProtocolDecoders.h"
-		
+		#include "Config/AppConfig.h"
-		#include "Config/NetworkConfig.h"
 
 	/* Macros: */
 		/** Protocol IP address of the broadcast address. */

Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h

@@ -45,8 +45,7 @@
 
 		#include "EthernetProtocols.h"
 		#include "Ethernet.h"
-		
+		#include "Config/AppConfig.h"
-		#include "Config/NetworkConfig.h"
 
 	/* Function Prototypes: */
 		void DecodeEthernetFrameHeader(void* InDataStart);

Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt

@@ -85,47 +85,57 @@
  *   </tr>
  *   <tr>
  *    <td>CLIENT_IP_ADDRESS</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
  *   </tr>
  *   <tr>
- *    <td>HOST_IP_ADDRESS</td>
+ *    <td>SERVER_IP_ADDRESS</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
- *    <td>Configures the IP address used in the virtual server for communications to/from the client.</td>
+ *    <td>Configures the IP address of the virtual server.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>ADAPTER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>SERVER_MAC_ADDRESS</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configures the MAC address of the virtual server on the network.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_ETHERNET</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_ARP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_IP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_ICMP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_TCP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_UDP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_DECODE_DHCP</td>
- *    <td>NetworkConfig.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
  *   </tr>
  *  </table>

Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c

@@ -128,6 +128,9 @@ void SetupHardware(void)
 
 	/* Create a stdio stream for the serial port for stdin and stdout */
 	Serial_CreateStream(NULL);
+	
+	/* Start the ADC conversion in free running mode */
+	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));	
 }
 
 /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h

@@ -52,25 +52,15 @@
 		#include <LUFA/Drivers/Board/Buttons.h>
 		#include <LUFA/Drivers/USB/USB.h>
 		
-	/* Macros: */
+		#include "Config/AppConfig.h"
-		/** ADC channel number for the microphone input. */
-		#define MIC_IN_ADC_CHANNEL        2
-
-		/** ADC channel MUX mask for the microphone input. */
-		#define MIC_IN_ADC_MUX_MASK       ADC_CHANNEL2
 
+	/* Macros: */
 		/** Maximum audio sample value for the microphone input. */
 		#define SAMPLE_MAX_RANGE          0xFFFF
 
 		/** Maximum ADC range for the microphone input. */
 		#define ADC_MAX_RANGE             0x3FF
 
-		/** Defined to indicate that the microphone input voltage is biased to half the ADC reference voltage. */
-		#define MICROPHONE_BIASED_TO_HALF_RAIL
-		
-		/** Defined to generate test tone when a button is pressed, rather than use a microphone for audio samples. */
-		#define USE_TEST_TONE
-
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
 		#define LEDMASK_USB_NOTREADY      LEDS_LED1
 

Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt

@@ -63,14 +63,19 @@
  *    <td><b>Description:</b></td>
  *   </tr>
  *   <tr>
+ *    <td>MIC_IN_ADC_CHANNEL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ *   </tr>
+ *   <tr>
  *    <td>USE_TEST_TONE</td>
- *    <td>AudioOutputHost.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
  *        instead of sampling the board microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>AudioOutputHost.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
  *   </tr>
  *  </table>

Demos/Host/ClassDriver/AudioOutputHost/Config/AppConfig.h

@@ -0,0 +1,51 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define MIC_IN_ADC_CHANNEL               2
+
+	#define MICROPHONE_BIASED_TO_HALF_RAIL
+	#define USE_TEST_TONE
+
+#endif

Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c

@@ -74,6 +74,9 @@ void SetupHardware(void)
 
 	/* Create a stdio stream for the serial port for stdin and stdout */
 	Serial_CreateStream(NULL);
+
+	/* Start the ADC conversion in free running mode */
+	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));	
 }
 
 /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h

@@ -53,26 +53,15 @@
 		#include <LUFA/Drivers/Board/Buttons.h>
 
 		#include "ConfigDescriptor.h"
+		#include "Config/AppConfig.h"
 
 	/* Macros: */
-		/** ADC channel number for the microphone input. */
-		#define MIC_IN_ADC_CHANNEL        2
-
-		/** ADC channel MUX mask for the microphone input. */
-		#define MIC_IN_ADC_MUX_MASK       ADC_CHANNEL2
-
 		/** Maximum audio sample value for the microphone input. */
 		#define SAMPLE_MAX_RANGE          0xFFFF
 
 		/** Maximum ADC range for the microphone input. */
 		#define ADC_MAX_RANGE             0x3FF
 
-		/** Defined to indicate that the microphone input voltage is biased to half the ADC reference voltage. */
-		#define MICROPHONE_BIASED_TO_HALF_RAIL
-		
-		/** Defined to generate test tone when a button is pressed, rather than use a microphone for audio samples. */
-		#define USE_TEST_TONE
-
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
 		#define LEDMASK_USB_NOTREADY      LEDS_LED1
 

Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt

@@ -63,14 +63,19 @@
  *    <td><b>Description:</b></td>
  *   </tr>
  *   <tr>
+ *    <td>MIC_IN_ADC_CHANNEL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ *   </tr>
+ *   <tr>
  *    <td>USE_TEST_TONE</td>
- *    <td>AudioOutputHost.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
  *        instead of sampling the board microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>AudioOutputHost.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
  *   </tr>
  *  </table>

Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h

@@ -0,0 +1,51 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define MIC_IN_ADC_CHANNEL               2
+
+	#define MICROPHONE_BIASED_TO_HALF_RAIL
+	#define USE_TEST_TONE
+
+#endif

Projects/MIDIToneGenerator/Config/AppConfig.h

@@ -0,0 +1,48 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define MAX_SIMULTANEOUS_NOTES     3
+
+#endif

Projects/MIDIToneGenerator/MIDIToneGenerator.h

@@ -45,6 +45,7 @@
 		#include <stdbool.h>
 
 		#include "Descriptors.h"
+		#include "Config/AppConfig.h"
 
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
@@ -76,9 +77,6 @@
 		/** Lowest valid MIDI pitch index */
 		#define BASE_PITCH_INDEX           21
 
-		/** Maximum number of MIDI notes that can be played simultaneously */
-		#define MAX_SIMULTANEOUS_NOTES     3
-
 		/** Number of samples in the virtual sample table (can be expanded to lower maximum frequency, but allow for
 		 *  more simultaneous notes due to the reduced amount of processing time needed when the samples are spaced out)
 		 */

Projects/MIDIToneGenerator/MIDIToneGenerator.txt

@@ -64,7 +64,7 @@
  *   </tr>
  *   <tr>
  *    <td>MAX_SIMULTANEOUS_NOTES</td>
- *    <td>MIDIToneGenerator.h</td>
+ *    <td>AppConfig.h</td>
  *    <td>Sets the maximum number of MIDI notes that can be generated simultaneously. More notes require more processing time,
  *        and thus a value that is too high will cause audiable sound distortion due to insufficient CPU time.</td>
  *   </tr>