forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge remote-tracking branch 'upstream/master'

Browse Source
pull/1213/head
nstickney 8 years ago
parent b69b214d52 615bfc4eca
commit eab0166f83
66 changed files with 2369 additions and 349 deletions
Show Stats Download Patch File Download Diff File

83
keyboards/clueboard/keymaps/caps_fn/keymap.c
Unescape View File

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

BIN
keyboards/clueboard/keymaps/caps_fn/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 110 KiB

15
keyboards/clueboard/keymaps/caps_fn/readme.md
Unescape View File

@ -0,0 +1,15 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Caps Fn Layout
This is the default layout except that Caps Lock acts like Caps Lock when
tapped but Fn when held.

93
keyboards/clueboard/keymaps/default/keymap.c
Unescape View File

@ -1,7 +1,8 @@
#include "clueboard.h" #include "clueboard.h"
// Used for SHIFT_ESC // Helpful defines
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) #define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below. // Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name. // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@ -9,21 +10,10 @@
// entirely and just use numbers. // entirely and just use numbers.
#define _BL 0 #define _BL 0
#define _FL 1 #define _FL 1
#define _RS 2 #define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer /* Keymap _BL: Base Layer (Default Layer)
* ,--------------------------------------------------------------------------. ,----.
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
* |--------------------------------------------------------------------------| |----|
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
* |--------------------------------------------------------------------------| `----'
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
* |-----------------------------------------------------------------------------.
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
* |------------------------------------------------------------------------|----|----.
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
* `----------------------------------------------------------------------------------'
*/ */
[_BL] = KEYMAP( [_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
@ -33,61 +23,44 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer /* Keymap _FL: Function Layer
* ,--------------------------------------------------------------------------. ,----.
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
* |--------------------------------------------------------------------------| |----|
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | |PGUP|
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL|HOME|PGDN| END|
* `----------------------------------------------------------------------------------'
*/ */
[_FL] = KEYMAP( [_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _RS: Reset layer /* Keymap _CL: Control layer
* ,--------------------------------------------------------------------------. ,----.
* | | | | | | | | | | | | | | | | | |
* |--------------------------------------------------------------------------| |----|
* | | | | |RESET| | | | | | | | | | | |
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL| | | |
* `----------------------------------------------------------------------------------'
*/ */
[_RS] = KEYMAP( [_CL] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
enum function_id {
SHIFT_ESC,
}; };
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = { const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC), [0] = ACTION_FUNCTION(0), // Calls action_function()
}; };
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask; static uint8_t mods_pressed;
switch (id) { switch (id) {
case SHIFT_ESC: case 0:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; /* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) { if (record->event.pressed) {
if (shift_esc_shift_mask) { /* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV); add_key(KC_GRV);
send_keyboard_report(); send_keyboard_report();
} else { } else {
@ -95,7 +68,9 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
send_keyboard_report(); send_keyboard_report();
} }
} else { } else {
if (shift_esc_shift_mask) { /* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV); del_key(KC_GRV);
send_keyboard_report(); send_keyboard_report();
} else { } else {

BIN
keyboards/clueboard/keymaps/default/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 110 KiB

17
keyboards/clueboard/keymaps/default/readme.md
Unescape View File

@ -0,0 +1,17 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Default Clueboard Layout
This is the default layout that comes flashed on every Clueboard. For the most
part it's a straightforward and easy to follow layout. The only unusual key is
the key in the upper left, which sends Escape normally, but Grave when any of
the Ctrl, Alt, or GUI modifiers are held down.

83
keyboards/clueboard/keymaps/mac_optimized/keymap.c
Unescape View File

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

BIN
keyboards/clueboard/keymaps/mac_optimized/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 105 KiB

15
keyboards/clueboard/keymaps/mac_optimized/readme.md
Unescape View File

@ -0,0 +1,15 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Default Clueboard Layout for Mac
This is the default Clueboard layout with Alt and GUI switched to match Mac
conventions.

49
keyboards/clueboard/keymaps/max/Makefile
Unescape View File

@ -1,49 +0,0 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Build Options
# change to "no" to disable the options, or define them in the makefile.mk in
# the appropriate keymap folder that will get included automatically
#
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

85
keyboards/clueboard/keymaps/max/keymap.c
Unescape View File

@ -1,85 +0,0 @@
#include "clueboard.h"
// Used for SHIFT_ESC
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _RS 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer
* ,--------------------------------------------------------------------------. ,----.
* | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp|
* |--------------------------------------------------------------------------| |----|
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn|
* |--------------------------------------------------------------------------| `----'
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
* |-----------------------------------------------------------------------------.
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up|
* |------------------------------------------------------------------------|----|----.
* | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght|
* `----------------------------------------------------------------------------------'
*/
[_BL] = KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
* ,--------------------------------------------------------------------------. ,----.
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
* |--------------------------------------------------------------------------| |----|
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | |PGUP|
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL|HOME|PGDN| END|
* `----------------------------------------------------------------------------------'
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END),
/* Keymap _RS: Reset/Underlight layer
* ,--------------------------------------------------------------------------. ,----.
* | | | | | | | | | | | | | | | | | |
* |--------------------------------------------------------------------------| |----|
* | | | | |RESET| | | | | | | | | | | |
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL| | | |
* `----------------------------------------------------------------------------------'
*/
[_RS] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI),
};
/*enum function_id {
};*/
const uint16_t PROGMEM fn_actions[] = {
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
}
}

47
keyboards/clueboard/keymaps/maximised/keymap.c
Unescape View File

@ -0,0 +1,47 @@
#include "clueboard.h"
// Helpful defines
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), KC_PGUP, \
_______, _______, _______,_______, _______,_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Reset/Underlight layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
const uint16_t PROGMEM fn_actions[] = {
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
};

BIN
keyboards/clueboard/keymaps/maximised/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 109 KiB

14
keyboards/clueboard/keymaps/maximised/readme.md
Unescape View File

@ -0,0 +1,14 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Maximised Clueboard Layout
This layout is intended for a board with one or both shifts split. The outside key on the split shift is an Fn, while the inside is shift. The bottom row has all the mods on both sides, optimised for a Mac.

1
keyboards/clueboard/keymaps/mouse_keys/Makefile
Unescape View File

@ -0,0 +1 @@
MOUSEKEY_ENABLE = yes

93
keyboards/clueboard/keymaps/mouse_keys/keymap.c
Unescape View File

@ -0,0 +1,93 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
#define _ML 3
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
/* Keymap _ML: Mouse layer
*/
[_ML] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \
_______, _______, KC_BTN3,KC_BTN2,KC_BTN1,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MS_U, \
_______, _______, _______,_______, LT(_ML, KC_SPC),LT(_ML, KC_SPC), _______, KC_BTN1, KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D,KC_MS_R),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

BIN
keyboards/clueboard/keymaps/mouse_keys/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 140 KiB

16
keyboards/clueboard/keymaps/mouse_keys/readme.md
Unescape View File

@ -0,0 +1,16 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# MouseKeys Layout
This layout adds a mouse layer. When you hold down the spacebar the arrow keys
will move your mouse cursor. You can click using the 3 mods to the left of the
arrow keys, or the 3 keys under your primary fingers on the home row.

83
keyboards/clueboard/keymaps/shift_fn/keymap.c
Unescape View File

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
S(KC_GRV), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_GRV), KC_DEL, BL_STEP, \
S(KC_TAB), S(KC_Q), S(KC_W),S(KC_E),S(KC_R),S(KC_T), S(KC_Y), S(KC_U),S(KC_I),S(KC_O), S(KC_P), S(KC_LBRC),S(KC_RBRC),S(KC_BSLS), S(KC_PGDN), \
S(KC_LCTL),S(KC_A), MO(_CL),S(KC_D),S(KC_F),S(KC_G), S(KC_H), S(KC_J),S(KC_K),S(KC_L), S(KC_SCLN),S(KC_QUOT),S(KC_NUHS),S(KC_ENT), \
MO(_FL), S(KC_NUBS),S(KC_Z),S(KC_X),S(KC_C),S(KC_V), S(KC_B), S(KC_N),S(KC_M),S(KC_COMM),S(KC_DOT), S(KC_SLSH),S(KC_RO), KC_RSFT, KC_PGUP, \
KC_LCTL, KC_LALT, KC_LGUI,MO(_FL), S(KC_SPC),S(KC_SPC), MO(_FL), KC_RGUI, KC_RALT, KC_RCTL, KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

BIN
keyboards/clueboard/keymaps/shift_fn/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 105 KiB

17
keyboards/clueboard/keymaps/shift_fn/readme.md
Unescape View File

@ -0,0 +1,17 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Shift Fn Clueboard Layout
This is an experimental layout. It makes the left shift key a dual roll key.
For most keys it acts as a shift key, but for some keys it activates an
alternate function instead. Primarily I use this to access the F-keys under
the number rows.

90
keyboards/clueboard/keymaps/skully/keymap.c
Unescape View File

@ -1,7 +1,8 @@
#include "clueboard.h" #include "clueboard.h"
// Used for SHIFT_ESC // Helpful defines
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) #define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below. // Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name. // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@ -9,21 +10,10 @@
// entirely and just use numbers. // entirely and just use numbers.
#define _BL 0 #define _BL 0
#define _FL 1 #define _FL 1
#define _RS 2 #define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer /* Keymap _BL: Base Layer (Default Layer)
* ,--------------------------------------------------------------------------. ,----.
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
* |--------------------------------------------------------------------------| |----|
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
* |--------------------------------------------------------------------------| `----'
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
* |-----------------------------------------------------------------------------.
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
* |------------------------------------------------------------------------|----|----.
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
* `----------------------------------------------------------------------------------'
*/ */
[_BL] = KEYMAP( [_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
@ -33,61 +23,41 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer /* Keymap _FL: Function Layer
* ,--------------------------------------------------------------------------. ,----.
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
* |--------------------------------------------------------------------------| |----|
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | |PGUP|
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL|HOME|PGDN| END|
* `----------------------------------------------------------------------------------'
*/ */
[_FL] = KEYMAP( [_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, BL_STEP, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______, _______, \
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, \
KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END), _______,_______,_______,MO(_FL), _______,_______, MO(_FL),_______,_______,MO(_FL),KC_HOME,KC_PGDN,KC_END),
/* Keymap _RS: Reset layer /* Keymap _CL: Control layer
* ,--------------------------------------------------------------------------. ,----.
* | | | | | | | | | | | | | | | | | |
* |--------------------------------------------------------------------------| |----|
* | | | | |RESET| | | | | | | | | | | |
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL| | | |
* `----------------------------------------------------------------------------------'
*/ */
[_RS] = KEYMAP( [_CL] = KEYMAP(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS), _______,_______,_______,_______, _______,_______, _______,_______,_______,MO(_FL),_______, _______, _______),
};
enum function_id {
SHIFT_ESC,
}; };
const uint16_t PROGMEM fn_actions[] = { const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC), [0] = ACTION_FUNCTION(0),
}; };
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask; static uint8_t mods_pressed;
switch (id) { switch (id) {
case SHIFT_ESC: case 0:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; /* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) { if (record->event.pressed) {
if (shift_esc_shift_mask) { /* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV); add_key(KC_GRV);
send_keyboard_report(); send_keyboard_report();
} else { } else {
@ -95,7 +65,9 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
send_keyboard_report(); send_keyboard_report();
} }
} else { } else {
if (shift_esc_shift_mask) { /* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV); del_key(KC_GRV);
send_keyboard_report(); send_keyboard_report();
} else { } else {

BIN
keyboards/clueboard/keymaps/skully/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 109 KiB

11
keyboards/clueboard/keymaps/skully/readme.md
Unescape View File

@ -1,3 +1,14 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# skullY's Clueboard Layout # skullY's Clueboard Layout
This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing. This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing.

83
keyboards/clueboard/keymaps/unix_optimized/keymap.c
Unescape View File

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_INS, \
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, KC_DEL, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD,RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

BIN
keyboards/clueboard/keymaps/unix_optimized/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 109 KiB

15
keyboards/clueboard/keymaps/unix_optimized/readme.md
Unescape View File

@ -0,0 +1,15 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Default Clueboard Layout
This is the default layout except that Caps Lock has been changed to Control
and Insert and Delete have been put into the Fn layer.

83
keyboards/clueboard/keymaps/win_optimized/keymap.c
Unescape View File

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

BIN
keyboards/clueboard/keymaps/win_optimized/layout.png
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 108 KiB

17
keyboards/clueboard/keymaps/win_optimized/readme.md
Unescape View File

@ -0,0 +1,17 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Default Clueboard Layout
This is the default layout that comes flashed on every Clueboard. For the most
part it's a straightforward and easy to follow layout. The only unusual key is
the key in the upper left, which sends Escape normally, but Grave when any of
the Ctrl, Alt, or GUI modifiers are held down.

10
keyboards/clueboard/rules.mk
Unescape View File

@ -90,14 +90,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400) CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
AUDIO_ENABLE ?= no AUDIO_ENABLE ?= no
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality
MIDI_ENABLE ?= no # MIDI controls MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID

1
keyboards/ergodox/keymaps/colemak_programmer/Makefile
Unescape View File

@ -0,0 +1 @@
TAP_DANCE_ENABLE = no

BIN
keyboards/ergodox/keymaps/colemak_programmer/colemak_programmer_001.jpg
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 294 KiB

BIN
keyboards/ergodox/keymaps/colemak_programmer/colemak_programmer_002.jpg
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 230 KiB

256
keyboards/ergodox/keymaps/colemak_programmer/keymap.c
Unescape View File

@ -0,0 +1,256 @@
#include "ergodox.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Basic layer
* MEH: Alt+Control+Shift
* HYPER: Alt+Control+Shift+Gui
* ,--------------------------------------------------. ,--------------------------------------------------.
* | ` ~ | 1 ! | 2 @ | 3 # | 4 $ | 5 % | 6 ^ | | 7 & | 8 * | 9 ( | 0 ) | - _ | = + | Backsp |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | TAB | Q | W | F | P | G |TG(3) | |TG(4) | J | L | U | Y | ; : | ' " |
* |--------+------+------+------+------+------|F-lck | |N-lck |------+------+------+------+------+--------|
* | CAPS | A | R | S | T | D |------| |------| H | N | E | I | O | ENT |
* |--------+------+------+------+------+------| MEH | | MEH |------+------+------+------+------+--------|
* | Shift | Z | X | C | V | B | | | | K | M | , < | . > | UP | Shift |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | LCTL | LCTL | LGUI | LALT | LGUI | | RALT | RCTL | LEFT | DOWN | RIGHT|
* `----------------------------------' `----------------------------------'
* ,--------------. ,--------------.
* | Esc | App | | Ins | Del |
* ,------|------|-------| |------+-------+------.
* | | | Home | | PgUp | | |
* | MO(2)| MO(4)|-------| |------| Space |Space |
* |symbol|N-Lock| End | | PgDn | | |
* `---------------------' `---------------------'
*/
[0] = KEYMAP( // layer 0 : default
// left hand
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(3),
KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MEH,
KC_LCTL, KC_LCTL, KC_LGUI, KC_LALT, KC_LGUI,
KC_ESC, KC_APP,
KC_HOME,
MO(2), MO(4), KC_END,
// right hand
KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
TG(4), KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_QUOT,
KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT,
KC_MEH, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSFT,
KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT,
KC_INS, KC_DEL,
KC_PGUP,
KC_PGDN, KC_SPC, KC_SPC
),
/* Keymap 1: QWERTY layer (games)
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | Q | W | E | R | T | | | | Y | U | I | O | P | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | A | S | D | F | G |------| |------| H | J | K | L | ; | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | Z | X | C | V | B | | | | N | M | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+--------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `----------------------'
*/
[1] = KEYMAP( // layer 1: QWERTY layer (games)
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS,
KC_TRNS, KC_A, KC_S, KC_D, KC_F, KC_G,
KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TRNS,
KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_TRNS,
KC_TRNS, KC_N, KC_M, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
/* Keymap 2: Symbol Layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | + | < | % | # | DF(1)| | | & | [ | ] | \ | : | " |
* |--------+------+------+------+------+------|QWERTY| | |------+------+------+------+------+--------|
* | | ! | - | > | = | @ |------| |------| * | { | } | / | ? | |
* |--------+------+------+------+------+------| DF(0)| | |------+------+------+------+------+--------|
* | | NUBS | NUHS | / | $ | ^ |COLEMAK | | | | ( | ) | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// SYMBOLS
[2] = KEYMAP(
// left hand
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
KC_TRNS, KC_PIPE, KC_PLUS, KC_LT, KC_PERC, KC_HASH, DF(1),
KC_LBRC, KC_EXCLAIM, KC_MINUS, KC_GT, KC_EQUAL, KC_AT,
KC_TRNS, KC_NUBS, KC_NUHS, KC_SLSH, KC_DOLLAR, KC_CIRC, DF(0),
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
KC_TRNS, KC_AMPERSAND, KC_LBRC, KC_RBRC, KC_BSLS, KC_COLN, KC_DQT,
KC_ASTERISK, KC_LCBR, KC_RCBR, KC_SLSH, KC_QUES, KC_TRNS,
KC_TRNS, KC_PIPE, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
/* Keymap 3:
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | | | | | | | | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | |------| |------| | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | | HYPR | | HYPR | | | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------ |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// F-keys
[3] = KEYMAP(
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HYPR,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_HYPR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
/* Keymap 4: Numlock
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | RESET | | | |P-SCRE|S-LOCK|PAUSE | |NLOCK | CALC | = | / | * | | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | | | | | | | Vol+ | 7 | 8 | 9 | - | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | |------| |------| Vol- | 4 | 5 | 6 | + | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | | HYPR | | HYPR | Mute | 1 | 2 | 3 |Enter | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | 0 | . | RCTL | RCTL |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------ |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
[4] = KEYMAP(
RESET, KC_LSFT, KC_LSFT, KC_SYSREQ, KC_PSCR, KC_SLCK, KC_PAUSE,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HYPR,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_NLCK, KC_CALC, KC_PEQL, KC_PSLS, KC_PAST, KC_LSFT, KC_TRNS,
KC_TRNS, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_TRNS,
KC_VOLD, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS,
KC_HYPR, KC_MUTE, KC_P1, KC_P2, KC_P3, KC_PENT, KC_TRNS,
KC_TRNS, KC_P0, KC_PDOT, KC_RCTL, KC_RCTL,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
static uint8_t state;
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
//reduce LED on time to 1/6th because LEDs are too strong
if (++state < 6) return;
state = 0;
//bit 1: default layer 1 - QWERTY
if (default_layer_state & (1UL << 1)) ergodox_right_led_1_on();
uint8_t layer = biton32(layer_state);
//layer 2 : Symbols (& Fs)
//if (layer == 2) ergodox_right_led_2_on();
//layer 3 : F-lock
if (layer == 3) ergodox_right_led_2_on();
//layer 4 : Num-lock
if (layer == 4) ergodox_right_led_3_on();
};

23
keyboards/ergodox/keymaps/colemak_programmer/readme.md
Unescape View File

@ -0,0 +1,23 @@
# ErgoDox EZ colemak_programmer
## Features
* Qwerty and colemak 2 in 1
* Use DF() macro to swap the bottom layer so it behaves literally as collemak or qwerty
* Graphical creator did not allow this so I had to use TO(0) and TO(1) on the picture
* Symbol layer programmers friendly
* Not only symbols are easy to access but common combination are easy too: ->, =>, !=, etc.
* Windows and Mac
* The extra repeated Win key is very handy on Mac
* Numlock
I came to this layout after several iterations. It is not the ultimate best ergonomic layout but it is the best if you switch back and forth between ergodox and laptops.
## Notes
* The Quote and Enter can be swapped
* If you use sculpted key caps try turning the bottom key 180 degrees so it became very comfortable to type with thumb.
Alternatively view the [graphical creator version](http://configure.ergodox-ez.com/keyboard_layouts/kmevwm/edit) but beware it is not the same due to the creator limitations.
![Default](colemak_programmer_001.jpg)
![Default](colemak_programmer_002.jpg)

112
keyboards/gh60/keymaps/unxmaal/Makefile
Unescape View File

@ -0,0 +1,112 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
# MIDI_ENABLE ?= YES # MIDI controls
# UNICODE_ENABLE ?= YES # Unicode
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

20
keyboards/gh60/keymaps/unxmaal/README.md
Unescape View File

@ -0,0 +1,20 @@
Unxmaal's GH60 Layout
=====================
* Mostly stolen from /u/robotmaxtron
##Quantum MK Firmware
For the full Quantum feature list, see the parent readme.md.
* Standard Mac ANSI layout
* Spacebar acts as space when tapped, Fn when held
* Menu acts as menu when tapped, Fn2 when held
* Layer1:
* Top row = `~, F1-F12, Del
* JKIL = arrow cluster
* Layer2:
* Top row = media controls
* JKIL = PgDn/Up/Home/Insert
* Backspace = Reset
### Additional Credits
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.

BIN
keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1015 KiB

190
keyboards/gh60/keymaps/unxmaal/config.h
Unescape View File

@ -0,0 +1,190 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* RGB Underglow
* These settings are for the F4 by default:
*
*
* #define ws2812_PORTREG PORTF
* #define ws2812_DDRREG DDRF
* #define ws2812_pin PF4
* #define RGBLED_NUM 14 // Number of LEDs
* #define RGBLIGHT_HUE_STEP 10
* #define RGBLIGHT_SAT_STEP 17
* #define RGBLIGHT_VAL_STEP 17
*
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
*/
/* Deprecated code below
#define ws2812_PORTREG PORTF
#define ws2812_DDRREG DDRF
#define ws2812_pin PF4
*/
#define RGB_DI_PIN F4
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 8 // Number of LEDs
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

228
keyboards/gh60/keymaps/unxmaal/keymap.c
Unescape View File

@ -0,0 +1,228 @@
#include "gh60.h"
#include "action_layer.h"
#define _BL 0
#define _AL 1
#define _FL 2
#define _UL 3
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* ANSI Base, Mac style
* ,-----------------------------------------------------------------------------.
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp |
* |-----------------------------------------------------------------------------|
* |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \|
* |-----------------------------------------------------------------------------|
* |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter |
* |-----------------------------------------------------------------------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
* |-----------------------------------------------------------------------------|
* |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl|
* `-----------------------------------------------------------------------------'
*/
[_BL] = KEYMAP(
KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \
KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \
KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \
KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \
MO(1),KC_LALT,KC_LGUI, LT(1,KC_SPACE), KC_NO, KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL),
/*
* Pok3r style arrow cluster
* ,-----------------------------------------------------------.
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
* |-----------------------------------------------------------|
* | | | | | | | | |Up| | | | | |
* |-----------------------------------------------------------|
* | | | | | | | |Left|Down|Right| | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_AL] = KEYMAP(
KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/*
* Secondary function layer
* ,-------------------------------------------------------------.
* | | | | | | | | RW|Play|FF| Mute| Vol Down | Vol up |Reset |
* |-------------------------------------------------------------|
* | | | | | | | | | |PgUp| | | | |
* |-------------------------------------------------------------|
* | | | | | | | |Home|PgDown|End| | | |
* |-------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-------------------------------------------------------------|
* | | | | | | | | |
* `-------------------------------------------------------------'
*/
[_FL] = KEYMAP(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,RESET, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_TRNS,KC_HOME,KC_PGDN,KC_END,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/*
* Locking layer for controlling the underglow.
* NOTE: currently unused.
*
* ,-----------------------------------------------------------.
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | |On|Mode| | | | | | | | | | |
* |-----------------------------------------------------------|
* | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_UL] = KEYMAP(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
};
enum function_id {
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
SHIFT_ESC,
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay
[1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay
[2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
[3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay
[4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
[5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
[6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
[7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
[8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
[9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
[10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
[11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
[12] = ACTION_FUNCTION(SHIFT_ESC),
[13] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_scan_user(void) {
// Layer LED indicators
// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
uint32_t layer = layer_state;
if (layer & (1<<1)) {
gh60_wasd_leds_on();
} else {
gh60_wasd_leds_off();
}
if (layer & (1<<2)) {
gh60_esc_led_on();
} else {
gh60_esc_led_off();
}
};
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
case RGBLED_TOGGLE:
//led operations
if (record->event.pressed) {
rgblight_toggle();
}
break;
case RGBLED_INCREASE_HUE:
if (record->event.pressed) {
rgblight_increase_hue();
}
break;
case RGBLED_DECREASE_HUE:
if (record->event.pressed) {
rgblight_decrease_hue();
}
break;
case RGBLED_INCREASE_SAT:
if (record->event.pressed) {
rgblight_increase_sat();
}
break;
case RGBLED_DECREASE_SAT:
if (record->event.pressed) {
rgblight_decrease_sat();
}
break;
case RGBLED_INCREASE_VAL:
if (record->event.pressed) {
rgblight_increase_val();
}
break;
case RGBLED_DECREASE_VAL:
if (record->event.pressed) {
rgblight_decrease_val();
}
break;
case RGBLED_STEP_MODE:
if (record->event.pressed) {
rgblight_step();
}
break;
static uint8_t shift_esc_shift_mask;
// Shift + ESC = ~
case SHIFT_ESC:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
if (record->event.pressed) {
if (shift_esc_shift_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (shift_esc_shift_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
};

16
keyboards/planck/keymaps/callum/keymap.c
Unescape View File

@ -14,7 +14,7 @@ extern keymap_config_t keymap_config;
#define _FUNC 4 #define _FUNC 4
#define ENDASH LALT(KC_MINS) #define ENDASH LALT(KC_MINS)
#define POUND LALT(KC_3) #define POUND LALT(KC_3)
#define H(X) LALT(LCTL(X))
enum planck_keycodes { enum planck_keycodes {
MOVE = SAFE_RANGE, MOVE = SAFE_RANGE,
@ -48,19 +48,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* MOVE /* MOVE
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
* | Esc | | Home | Up | End | | | Home | Up | End | | Esc | * | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del | * | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | | * | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | * | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_MOVE] = { [_MOVE] = {
{KC_ESC, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, KC_ESC }, {H(KC_3), H(KC_F1),H(KC_F2),H(KC_F3),H(KC_F4),H(KC_F5),H(KC_8), KC_HOME, KC_UP, KC_END, H(KC_7), KC_ESC },
{KC_DEL, KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL }, {H(KC_4), H(KC_F6),H(KC_F7),H(KC_F8),H(KC_F9),H(KC_F10),H(KC_9),KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL },
{_______, XXXXXXX, XXXXXXX, KC_PGUP, KC_PGDN, XXXXXXX, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______}, {_______, H(KC_F11),H(KC_F12),H(KC_0),H(KC_1),H(KC_2), H(KC_A), KC_PGDN, KC_PGUP, H(KC_5), H(KC_6), _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
}, },
@ -114,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_FUNC] = { [_FUNC] = {
{RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_VOLU}, {RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_VOLU},
{XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_VOLD}, {XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_VOLD},
{_______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_POWER, XXXXXXX, XXXXXXX, XXXXXXX, _______}, {_______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_POWER,XXXXXXX, XXXXXXX, XXXXXXX, _______},
{_______, _______, _______, _______, KC_MPRV, KC_MUTE, KC_MPLY, KC_MNXT, _______, _______, _______, _______} {_______, _______, _______, _______, KC_MPRV, KC_MUTE, KC_MPLY, KC_MNXT, _______, _______, _______, _______}
} }

10
keyboards/planck/keymaps/callum/readme.md
Unescape View File

@ -6,7 +6,7 @@ This is a layout for the grid planck, built with a few ideals in mind:
- The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible. - The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible.
- There should be two of every modifier (one on each side), otherwise certain long key combinations become hard to make. - There should be two of every modifier (one on each side), otherwise certain long key combinations become hard to make.
We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster and other movement keys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously. We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster, other movement keys, and hotkeys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously.
``` ```
/* BASE /* BASE
@ -23,11 +23,11 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
/* MOVE /* MOVE
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
* | Esc | | Home | Up | End | | | Home | Up | End | | Esc | * | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del | * | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | | * | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | * | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
@ -68,4 +68,4 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
* | | | | | Prev | Mute | Play | Next | | | | | * | | | | | Prev | Mute | Play | Next | | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
``` ```

16
keyboards/planck/keymaps/default/keymap.c
Unescape View File

@ -102,16 +102,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play | * | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_LOWER] = { [_LOWER] = {
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
{KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
}, },
/* Raise /* Raise
@ -120,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play | * | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
@ -138,7 +138,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | | S | T | P | H | * | * | F | P | L | T | D | * | | S | T | P | H | * | * | F | P | L | T | D |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* |TogOut| S | K | W | R | * | * | R | B | G | S | Z | * | | S | K | W | R | * | * | R | B | G | S | Z |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Exit | | | A | O | | E | U | | | | * | Exit | | | A | O | | E | U | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
@ -163,7 +163,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_ADJUST] = { [_ADJUST] = {
{_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
{_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______},
{_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}

BIN
keyboards/planck/keymaps/espynn/keyboard-layout.jpg
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 52 KiB

After

Width:  |  Height:  |  Size: 52 KiB

22
keyboards/planck/keymaps/espynn/keymap.c
Unescape View File

@ -60,7 +60,7 @@ const uint16_t PROGMEM fn_actions[] = {
[7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS), [7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS),
}; };
// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l // This config can be found at Keyboard layout editor site: https://goo.gl/cF7uIO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = { /* QWERTY */ [_QWERTY] = { /* QWERTY */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
@ -69,22 +69,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
{KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} {KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
}, },
[_LOWER] = { /* LOWER */ [_LOWER] = { /* LOWER */
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL}, {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_MINS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} {KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
}, },
[_RAISE] = { /* RAISE */ [_RAISE] = { /* RAISE */
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PLUS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, S(KC_COMM), S(KC_DOT), KC_BSLS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
}, },
[_CUSTOM] = { /* CUSTOM */ [_CUSTOM] = { /* CUSTOM */
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, CUS4, KC_TRNS, KC_F12, KC_TRNS},
{KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{BL, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} {BL, RESET, LALT(LCTL(KC_DEL)), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
} }
}; };

131
keyboards/planck/keymaps/espynn/layout.json
Unescape View File

@ -3,6 +3,7 @@
"backcolor": "#858585", "backcolor": "#858585",
"name": "Planck 40%", "name": "Planck 40%",
"author": "James Folkert", "author": "James Folkert",
"notes": "# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard\nAdded several custom functions to the keymap from the \"ab\" map. Special thanks to \"mollat\" for demonstration of macros in their keymap.c\n \n\n![Layout](keyboard-layout.png \"Practical Keymap\")\n\n* Online keyboard layout editor: http://goo.gl/mlLAFZ\n\n# Notes\n* Front legend text is the custom layer (both raise and lower)\n* Holding is denoted by down arrow, for example, right shift is an enter button when tapped, shift when held\n* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here\n* I disregarded the advice of Jack and used macros for passwords. I accept my fate.\n* RAISE and LOWER also acts as PgUp and PgDn when tapped.\n* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works)\n* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.",
"background": { "background": {
"name": "Aluminium brushed", "name": "Aluminium brushed",
"style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');" "style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');"
@ -19,41 +20,49 @@
2, 2,
2, 2,
0, 0,
2 0
] ]
}, },
"F1\n1\n\n!\n\n\n\n\n\n<i class='kb kb-Tab-2'></i>", "!\n1\n\n\nF1\n\n\n\n\n<i class='kb kb-Tab-2'></i>",
"F2\n2\n\n@\n\n\n\n\n\nQ", "@\n2\n\n\nF2\n\n\n\n\nQ",
"F3\n3\n\n#\n\n\n\n\n\nW", "#\n3\n\n\nF3\n\n\n\n\nW",
"F4\n4\n\n$\n\n\n\n\n\nE", "$\n4\n\n\nF4\n\n\n\n\nE",
"F5\n5\n\n%\n\n\n\n\n\nR", "%\n5\n\n\nF5\n\n\n\n\nR",
"F6\n6\n\n^\n\n\n\n\n\nT", "^\n6\n\n\nF6\n\n\n\n\nT",
"F7\n6\n\n&\n\n\n\n\n\nY", "&\n7\n\n\nF7\n\n\n\n\nY",
"F8\n8\n\n*\nMacro4\n\n\n\n\nU", "*\n8\n\n\nF8\n\n\n\n\nU",
"F9\n9\n\n(\n\n\n\n\n\nI", "(\n9\n\n\nF9\n\n\n\n\nI",
{ {
"fa": [ "fa": [
2,
0, 0,
0, 0,
0, 0
2
] ]
}, },
"F10\n0\n\n)\n\n\n\n\n\nO", ")\n0\n\n\nF10\n\n\n\n\nO",
{ {
"fa": [ "fa": [
2, 2,
2, 2,
0, 0,
2 0,
0,
0,
0,
0,
0
] ]
}, },
"F11\n-\n\n_\n\n\n\n\n\nP", "_\n-\n\n\nF11\n\n\n\n\nP",
"F12\n=\n\n+\n\n\n\n\n\n<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>" {
"a": 7,
"f": 3
},
"<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>"
], ],
[ [
{ {
"a": 7,
"f": 3 "f": 3
}, },
"<i class='mss mss-Unicode-DeleteRight-Big-2'></i>", "<i class='mss mss-Unicode-DeleteRight-Big-2'></i>",
@ -66,12 +75,12 @@
}, },
"S", "S",
{ {
"a": 4,
"f": 3 "f": 3
}, },
"D", "=\n_\n\n\n\n\n\n\n\nD",
{ {
"t": "#ff0000", "t": "#ff0000",
"a": 4,
"f": 3 "f": 3
}, },
"\n(\n\n\n\n\n\n\n\nF", "\n(\n\n\n\n\n\n\n\nF",
@ -93,24 +102,21 @@
"t": "#000000", "t": "#000000",
"f": 3 "f": 3
}, },
"{\n\n\n\n\n\n\n\n\nK", "+\n-\n\n\nMacro4\n\n\n\n\nK",
{ {
"a": 7,
"f": 3 "f": 3
}, },
"{\n\n\n\n\n\n\n\n\nL", "L",
{ {
"a": 6,
"fa": [ "fa": [
2, 2,
2, 2,
2,
2,
0,
0,
0,
2 2
] ]
}, },
"\\\n\n|\n\n\n\n\n:\n\n;", "\n\n:\n\nF12\n\n\n\n;",
{ {
"a": 7, "a": 7,
"fa": [ "fa": [
@ -141,66 +147,79 @@
"fa": [ "fa": [
2, 2,
2, 2,
2, 0,
2 0
] ]
}, },
"\\\n[\n|\n{\nPaste\n\n\n\n\nV", "\\\n[\n\n\nPaste\n\n\n\n\nV",
"|\n]\n\n}\nMacro1\n\n\n\n\nB", "|\n]\n\n\nMacro1\n\n\n\n\nB",
"`\n'\n~\n\"\nMacro5\n\n\n\n\nN", "`\n'\n\n\nMacro5\n\n\n\n\nN",
"~\n\"\n\n\nMacro2\n\n\n\n\nM", "~\n\"\n\n\nMacro2\n\n\n\n\nM",
{ {
"fa": [ "fa": [
2, 2,
2, 2,
2,
2,
0, 0,
0, 0,
0, 0,
1 0,
0,
2
] ]
}, },
"[\n\n{\n\n\n\n\n<\n\n,", "<\n\n\n\n\n\n\n<\n\n,",
"[\n\n{\n\n\n\n\n\n\n.",
{ {
"a": 6 "fa": [
2,
2,
0
]
}, },
"\n\n?\n\n\n\n\n\n/", ">\n\n\n\n\n\n\n>\n\n.",
{ {
"a": 4,
"fa": [ "fa": [
0,
2, 2,
2, 0,
0,
0,
0,
0,
2
]
},
"\\\n\n\n\n\n\n\n?\n\n/",
{
"fa": [
0,
2, 2,
0, 0,
0, 0,
0, 0,
0, 0,
1, 0,
9, 2,
0 9
] ]
}, },
"\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift\n\n\n\n\n<i class='mss mss-Unicode-Enter-3'></i>\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift" "\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift\n\n\n\n\n<i class='mss mss-Unicode-Enter-3'></i>\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift"
], ],
[ [
{ {
"a": 7, "a": 7
"f": 3
}, },
"Ctrl\n\n\n\nBLight", "Ctrl\n\n\n\nBLight",
{ {
"a": 4, "a": 4,
"fa": [ "fa": [
2, 0,
1, 1,
2,
0, 0,
0, 0,
0, 0,
0, 0,
1, 0,
2,
9, 9,
9 9
] ]
@ -208,29 +227,29 @@
"\nZNorm\n\n\nRESET\n\n\n\n\n<i class='mss mss-Unicode-Escape-3'></i>", "\nZNorm\n\n\nRESET\n\n\n\n\n<i class='mss mss-Unicode-Escape-3'></i>",
{ {
"fa": [ "fa": [
2, 0,
1, 1,
2,
0, 0,
0, 0,
0, 0,
0, 0,
1, 0,
2,
9, 9,
6 6
] ]
}, },
"\nZIn\n\n\n\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>", "\nZIn\n\n\nc.a.del\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>",
{ {
"fa": [ "fa": [
2, 0,
1, 1,
2,
0, 0,
0, 0,
0, 0,
0, 0,
1, 0,
2,
9, 9,
9 9
] ]

12
keyboards/planck/keymaps/espynn/readme.md
Unescape View File

@ -3,7 +3,7 @@ Created by James Folkert: https://twitter.com/trekloFsemaJ
Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c
![Layout](keyboard-layout.png "Practical Keymap") ![Layout](keyboard-layout.jpg "Practical Keymap")
* Online keyboard layout editor: http://www.keyboard-layout-editor.com/ * Online keyboard layout editor: http://www.keyboard-layout-editor.com/
@ -14,5 +14,11 @@ Added several custom functions to the keymap from the "ab" map. Special thanks t
* I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4 * I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4
* add your mobile and email to the keymap before make * add your mobile and email to the keymap before make
* RAISE and LOWER also acts as PgUp and PgDn when tapped. * RAISE and LOWER also acts as PgUp and PgDn when tapped.
* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works) * Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.
* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.
## changes
* Removed some unneeded keys from raise and lower layers
* moved the + and = signs, backspace is now more intuitive
* moved all the Function keys to CUSTOM layer
* added ctrl alt del to CUSTOM layer
* simplified the layout picture greatly

3
keyboards/roadkit/Makefile
Unescape View File

@ -0,0 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif

162
keyboards/roadkit/config.h
Unescape View File

@ -0,0 +1,162 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEAE
#define PRODUCT_ID 0x8846
#define DEVICE_VER 0x0001
#define MANUFACTURER TheVan Keyboards
#define PRODUCT Roadkit Micro
#define DESCRIPTION keyboard firmware for Roadkit Micro
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 4
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F0, F5, D7, B4 }
#define MATRIX_COL_PINS { F1, F4, D6, D4 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

21
keyboards/roadkit/keymaps/default/Makefile
Unescape View File

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

8
keyboards/roadkit/keymaps/default/config.h
Unescape View File

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

49
keyboards/roadkit/keymaps/default/keymap.c
Unescape View File

@ -0,0 +1,49 @@
#include "roadkit.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _NP 0
// Macro name shortcuts
#define NUMPAD M(_NP)
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_NP] = /* Numpad */
KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
KC_KP_4, KC_KP_5, KC_KP_6, \
KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \
KC_KP_0, KC_KP_DOT),
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _NP:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_NP);
}
break;
}
return MACRO_NONE;
};

1
keyboards/roadkit/keymaps/default/readme.md
Unescape View File

@ -0,0 +1 @@
# The default keymap for roadkit

21
keyboards/roadkit/keymaps/singles/Makefile
Unescape View File

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

8
keyboards/roadkit/keymaps/singles/config.h
Unescape View File

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

61
keyboards/roadkit/keymaps/singles/keymap.c
Unescape View File

@ -0,0 +1,61 @@
#include "roadkit.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _NP 0
#define _L1 1
// Macro name shortcuts
#define NUMPAD M(_NP)
#define LAYER1 M(_L1)
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_NP] = /* Numpad */
SINGLES_KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, \
KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \
KC_KP_0, KC_KP_DOT, TG(_L1), KC_BSPC),
[_L1] = /* LAYER 1 */
SINGLES_KEYMAP(KC_NUMLOCK, KC_TRNS, KC_TRNS, KC_VOLU, \
KC_TRNS, KC_UP, KC_TRNS, KC_VOLD, \
KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _L1:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_L1);
}
break;
case _NP:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_NP);
}
break;
}
return MACRO_NONE;
};

3
keyboards/roadkit/keymaps/singles/readme.md
Unescape View File

@ -0,0 +1,3 @@
# The singles keymap for roadkit
This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point.

32
keyboards/roadkit/readme.md
Unescape View File

@ -0,0 +1,32 @@
roadkit keyboard firmware
======================
## Quantum MK Firmware
For the full Quantum feature list, see [the QMK Wiki](https://github.com/qmk/qmk_firmware/wiki).
## Building
Download or clone the whole firmware and navigate to the `keyboards/roadkit` folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex. You can then use the programmer of your choice to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
To build with the default keymap, simply run `make default`. For the roadkit, the default layout is a standard numpad layout.
### Singles
The singles layout for the roadkit corresponds to the configuration where only 1u keys are used and there are 16 of them on the board. To build the singles keymap, run `make singles`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
```
$ make [default|jack|<name>]
```
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

28
keyboards/roadkit/roadkit.c
Unescape View File

@ -0,0 +1,28 @@
#include "roadkit.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}

33
keyboards/roadkit/roadkit.h
Unescape View File

@ -0,0 +1,33 @@
#ifndef ROADKIT_H
#define ROADKIT_H
#include "quantum.h"
// This is a shortcut to help you visually see your layout.
#define KEYMAP( \
K00, K01, K02, K03, \
K10, K11, K12, \
K20, K21, K22, K23, \
K30, K32 \
) \
{ \
{ K00, K01, K02, K03 }, \
{ K10, K11, K12, KC_NO }, \
{ K20, K21, K22, K23 }, \
{ K30, KC_NO, K32, KC_NO } \
}
#define SINGLES_KEYMAP( \
K00, K01, K02, K03, \
K10, K11, K12, K13, \
K20, K21, K22, K23, \
K30, K31, K32, K33 \
) \
{ \
{ K00, K01, K02, K03 }, \
{ K10, K11, K12, K13 }, \
{ K20, K21, K22, K23 }, \
{ K30, K31, K32, K33 } \
}
#endif

69
keyboards/roadkit/rules.mk
Unescape View File

@ -0,0 +1,69 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= yes # USB Nkey Rollover
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6

21
keyboards/satan/keymaps/unxmaal/Makefile
Unescape View File

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

20
keyboards/satan/keymaps/unxmaal/README.md
Unescape View File

@ -0,0 +1,20 @@
Unxmaal's GH60 Satan Layout
=====================
* Mostly stolen from /u/robotmaxtron
##Quantum MK Firmware
For the full Quantum feature list, see the parent readme.md.
* Standard Mac ANSI layout
* Spacebar acts as space when tapped, Fn when held
* Menu acts as menu when tapped, Fn2 when held
* Layer1:
* Top row = `~, F1-F12, Del
* JKIL = arrow cluster
* Layer2:
* Top row = media controls
* JKIL = PgDn/Up/Home/Insert
* Backspace = Reset
### Additional Credits
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.

119
keyboards/satan/keymaps/unxmaal/keymap.c
Unescape View File

@ -0,0 +1,119 @@
#include "satan.h"
// Used for SHIFT_ESC
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _AL 1
#define _FL 2
#define _______ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* ANSI Base, Mac style
* ,-----------------------------------------------------------------------------.
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp |
* |-----------------------------------------------------------------------------|
* |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \|
* |-----------------------------------------------------------------------------|
* |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter |
* |-----------------------------------------------------------------------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
* |-----------------------------------------------------------------------------|
* |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl|
* `-----------------------------------------------------------------------------'
*/
[_BL] = KEYMAP_ANSI(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
MO(_AL), KC_LALT,KC_LGUI, LT(_AL,KC_SPACE), KC_RGUI, KC_RALT, LT(_FL,KC_MENU), KC_RCTL),
/*
* Pok3r style arrow cluster
* ,-----------------------------------------------------------.
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
* |-----------------------------------------------------------|
* | | | | | | | | |Up| | | | | |
* |-----------------------------------------------------------|
* | | | | | | | |Left|Down|Right| | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_AL] = KEYMAP_ANSI(
KC_GRV, KC_F1, KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/* Keymap _FL: Function Layer
* ,-----------------------------------------------------------.
* | | | | | | | | | | | | | | RESET|
* |-----------------------------------------------------------|
* | | | | | | | | | | | |BL-|BL+|BL |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | RGB on|RGB step|Hue+|Hue- |Sat+|Sat-|Val+| Val-| | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_FL] = KEYMAP_ANSI(
#ifdef RGBLIGHT_ENABLE
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
_______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \
_______,_______,_______, _______, _______,_______,_______, _______),
#else
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
_______,_______,_______, _______, _______,_______,_______,_______),
#endif
};
enum function_id {
SHIFT_ESC,
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC),
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask;
switch (id) {
case SHIFT_ESC:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
if (record->event.pressed) {
if (shift_esc_shift_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (shift_esc_shift_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

2
tmk_core/common/action_tapping.c
Unescape View File

@ -257,7 +257,7 @@ bool process_tapping(keyrecord_t *keyp)
return true; return true;
} }
} else { } else {
if (!IS_NOEVENT(event)) debug("Tapping: other key just after tap.\n") {}; if (!IS_NOEVENT(event)) debug("Tapping: other key just after tap.\n");
process_record(keyp); process_record(keyp);
return true; return true;
} }

Write Preview
Loading…
Cancel
Save