Remove duplicate test keyboards (#6539)

* Remove test keyboards now onekey and splittest have been extended

* Add f072 for testing
pull/6544/head
Joel Challis 5 years ago committed by MechMerlin
parent d578aaefcd
commit ee8d9bd40a

@ -1,49 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "hal.h"
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
#if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config =
{
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
};
#endif
/*
* Early initialization code.
* This initialization must be performed just after stack setup and before
* any other initialization.
*/
void __early_init(void) {
stm32_clock_init();
}
/*
* Board-specific initialization code.
*/
void boardInit(void) {
}

@ -1,166 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for a Generic STM32F103 board.
*/
/*
* Board identifier.
*/
#define BOARD_GENERIC_STM32_F103
#define BOARD_NAME "Generic STM32F103x board"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
/*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
*/
#define STM32F103xB
/*
* IO pins assignments
*/
/* on-board */
#define GPIOC_LED 13
#define GPIOD_OSC_IN 0
#define GPIOD_OSC_OUT 1
/* In case your board has a "USB enable" hardware
controlled by a pin, define it here. (It could be just
a 1.5k resistor connected to D+ line.)
*/
/*
#define GPIOB_USB_DISC 10
*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
/*
* Port A setup.
* Everything input with pull-up except:
* PA2 - Alternate output (USART2 TX).
* PA3 - Normal input (USART2 RX).
* PA9 - Alternate output (USART1 TX).
* PA10 - Normal input (USART1 RX).
*/
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
/*
* Port B setup.
* Everything input with pull-up except:
* PB10 - Push Pull output (USB switch).
*/
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
/*
* Port C setup.
* Everything input with pull-up except:
* PC13 - Push Pull output (LED).
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD0 - Normal input (XTAL).
* PD1 - Normal input (XTAL).
*/
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* USB bus activation macro, required by the USB driver.
*/
/* The point is that most of the generic STM32F103* boards
have a 1.5k resistor connected on one end to the D+ line
and on the other end to some pin. Or even a slightly more
complicated "USB enable" circuit, controlled by a pin.
That should go here.
However on some boards (e.g. one that I have), there's no
such hardware. In which case it's better to not do anything.
*/
/*
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
/*
* USB bus de-activation macro, required by the USB driver.
*/
/*
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

Binary file not shown.

Before

Width:  |  Height:  |  Size: 159 KiB

@ -1,111 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#if HAL_USE_PAL || defined(__DOXYGEN__)
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
const PALConfig pal_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
#endif
};
#endif
void enter_bootloader_mode_if_requested(void);
/**
* @brief Early initialization code.
* @details This initialization must be performed just after stack setup
* and before any other initialization.
*/
void __early_init(void) {
enter_bootloader_mode_if_requested();
stm32_clock_init();
}
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
}

@ -1,923 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: LSE not fitted.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 0U
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

Binary file not shown.

Before

Width:  |  Height:  |  Size: 232 KiB

@ -1 +0,0 @@
#include "chibios_test.h"

@ -1,8 +0,0 @@
#ifndef KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_
#define KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_
#include "quantum.h"
#define LAYOUT(k00) {{ k00 }}
#endif /* KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ */

@ -1,65 +0,0 @@
/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6464
#define DEVICE_VER 0x0001
/* in python2: list(u"whatever".encode('utf-16-le')) */
/* at most 32 characters or the ugly hack in usb_main.c borks */
#define MANUFACTURER QMK
#define PRODUCT ChibiOS QMK test
#define DESCRIPTION QMK keyboard firmware test for ChibiOS
/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 1
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

@ -1,22 +0,0 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
{{KC_CAPS}}, // test with KC_CAPS, KC_A, RESET
};

@ -1,105 +0,0 @@
/*
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
* (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/*
* KL26Z64 memory setup.
*/
MEMORY
{
flash0 : org = 0x00000000, len = 0x100
flash1 : org = 0x00000400, len = 0x10
flash2 : org = 0x00000410, len = 62k - 0x410
flash3 : org = 0x0000F800, len = 2k
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x1FFFF800, len = 8k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* Flash region for the configuration bytes.*/
SECTIONS
{
.cfmprotect : ALIGN(4) SUBALIGN(4)
{
KEEP(*(.cfmconfig))
} > flash1
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash2);
REGION_ALIAS("XTORS_FLASH_LMA", flash2);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash2);
REGION_ALIAS("TEXT_FLASH_LMA", flash2);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash2);
REGION_ALIAS("RODATA_FLASH_LMA", flash2);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash2);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash2);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
__eeprom_workarea_start__ = ORIGIN(flash3);
__eeprom_workarea_size__ = LENGTH(flash3);
__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
/* Generic rules inclusion.*/
INCLUDE rules.ld

@ -1,88 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* ST32F103xB memory setup for use with the maplemini bootloader.
* You will have to
* #define CORTEX_VTOR_INIT 0x5000
* in your projects chconf.h
*/
MEMORY
{
flash0 : org = 0x08002000, len = 128k - 0x2000
flash1 : org = 0x00000000, len = 0
flash2 : org = 0x00000000, len = 0
flash3 : org = 0x00000000, len = 0
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x20000000, len = 20k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash0);
REGION_ALIAS("XTORS_FLASH_LMA", flash0);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash0);
REGION_ALIAS("TEXT_FLASH_LMA", flash0);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash0);
REGION_ALIAS("RODATA_FLASH_LMA", flash0);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash0);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash0);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld

@ -1,3 +0,0 @@
# ChibiOS Test Keyboards
Test code for several ARM based ChibiOS boards

@ -1,10 +0,0 @@
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = yes # Custom matrix file
DEFAULT_FOLDER = chibios_test/stm32_f072_onekey

@ -1,7 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

@ -1,7 +0,0 @@
#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_
#define KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_
#include "../config.h"
#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ */

@ -1,34 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "hal.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
(void)usb_led;
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output high
palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(GPIOC, GPIOC_LED_GREEN);
} else {
// Hi-Z
palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_INPUT);
}
}

@ -1,163 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ch.h"
#include "hal.h"
/*
* scan matrix
*/
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "wait.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
#define LED_ON() do { palSetPad(GPIOC, GPIOC_LED_BLUE) ;} while (0)
#define LED_OFF() do { palClearPad(GPIOC, GPIOC_LED_BLUE); } while (0)
#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED_BLUE); } while (0)
void matrix_init(void)
{
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
//debug
debug_matrix = true;
LED_ON();
wait_ms(500);
LED_OFF();
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
wait_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
wait_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
/* Column pin configuration
*/
static void init_cols(void)
{
// don't need pullup/down, since it's pulled down in hardware
palSetPadMode(GPIOA, GPIOA_BUTTON, PAL_MODE_INPUT);
}
/* Returns status of switches(1:on, 0:off) */
static matrix_row_t read_cols(void)
{
return ((palReadPad(GPIOA, GPIOA_BUTTON)==PAL_LOW) ? 0 : (1<<0));
// | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
}
/* Row pin configuration
*/
static void unselect_rows(void)
{
// palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z
}
static void select_row(uint8_t row)
{
(void)row;
// Output low to select
// switch (row) {
// case 0:
// palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL);
// palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW);
// break;
// }
}

@ -1,3 +0,0 @@
# ChibiOS Test
Test code for the stm32_f072 one key keyboard

@ -1,7 +0,0 @@
#ifndef STM32_F072_ONEKEY_H
#define STM32_F072_ONEKEY_H
#include "chibios_test.h"
#define LAYOUT(k00) {{ k00 }}
#endif

@ -1,10 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

@ -1,524 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef CHCONF_H
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
/*===========================================================================*/
/**
* @name System timers settings
* @{
*/
/*===========================================================================*/
/**
* @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
#define CH_CFG_ST_RESOLUTION 16
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#define CH_CFG_ST_FREQUENCY 2000
/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
#define CH_CFG_ST_TIMEDELTA 2
/** @} */
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
* @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
#define CH_CFG_MEMCORE_SIZE 0
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
* infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
/* Use __WFI in the idle thread for waiting. Does lower the power
* consumption. */
#define CORTEX_ENABLE_WFI_IDLE TRUE
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#define CH_CFG_OPTIMIZE_SPEED TRUE
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_REGISTRY TRUE
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_WAITEXIT TRUE
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_SEMAPHORES TRUE
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MUTEXES TRUE
/**
* @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased
* memory footprint.
*
* @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_CONDVARS TRUE
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_EVENTS TRUE
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MESSAGES TRUE
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_MAILBOXES TRUE
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMCORE TRUE
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#define CH_CFG_USE_HEAP TRUE
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMPOOLS FALSE
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
#define CH_CFG_USE_DYNAMIC FALSE
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, kernel statistics.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_STATISTICS FALSE
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_CHECKS FALSE
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_ASSERTS FALSE
/**
* @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_BUFFER_SIZE 128
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#define CH_DBG_ENABLE_STACK_CHECK FALSE
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_FILL_THREADS FALSE
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p FALSE.
* @note This debug option is not currently compatible with the
* tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API.
*
* @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
/**
* @brief ISR enter hook.
*/
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \
}
/**
* @brief ISR exit hook.
*/
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \
}
/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \
}
/**
* @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \
}
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
/**
* @brief Trace hook.
* @details This hook is invoked each time a new record is written in the
* trace buffer.
*/
#define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \
}
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* CHCONF_H */
/** @} */

@ -1,6 +0,0 @@
#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_
#define KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_
#include "../config.h"
#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ */

@ -1,2 +0,0 @@
#!/bin/bash
Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin

@ -1,353 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 1
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */

@ -1,43 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "hal.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
/* generic STM32F103C8T6 board */
#ifdef BOARD_GENERIC_STM32_F103
palClearPad(GPIOC, 13);
#endif
/* Maple Mini */
#ifdef BOARD_MAPLEMINI_STM32_F103
palSetPad(GPIOB, 1);
#endif
} else {
/* generic STM32F103C8T6 board */
#ifdef BOARD_GENERIC_STM32_F103
palSetPad(GPIOC, 13);
#endif
/* Maple Mini */
#ifdef BOARD_MAPLEMINI_STM32_F103
palClearPad(GPIOB,1);
#endif
}
}

@ -1,177 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ch.h"
#include "hal.h"
/*
* scan matrix
*/
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "wait.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
/* generic STM32F103C8T6 board */
#ifdef BOARD_GENERIC_STM32_F103
#define LED_ON() do { palClearPad(GPIOC, GPIOC_LED) ;} while (0)
#define LED_OFF() do { palSetPad(GPIOC, GPIOC_LED); } while (0)
#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED); } while (0)
#endif
/* Maple Mini */
#ifdef BOARD_MAPLEMINI_STM32_F103
#define LED_ON() do { palSetPad(GPIOB, 1) ;} while (0)
#define LED_OFF() do { palClearPad(GPIOB, 1); } while (0)
#define LED_TGL() do { palTogglePad(GPIOB, 1); } while (0)
#endif
void matrix_init(void)
{
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
//debug
debug_matrix = true;
LED_ON();
wait_ms(500);
LED_OFF();
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
wait_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
wait_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
/* Column pin configuration
*/
static void init_cols(void)
{
#ifdef BOARD_MAPLEMINI_STM32_F103
// don't need pullup/down, since it's pulled down in hardware
palSetPadMode(GPIOB, 8, PAL_MODE_INPUT);
#else
palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN);
#endif
}
/* Returns status of switches(1:on, 0:off) */
static matrix_row_t read_cols(void)
{
return ((palReadPad(GPIOB, 8)==PAL_LOW) ? 0 : (1<<0));
// | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
}
/* Row pin configuration
*/
static void unselect_rows(void)
{
// palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z
}
static void select_row(uint8_t row)
{
(void)row;
// Output low to select
// switch (row) {
// case 0:
// palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL);
// palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW);
// break;
// }
}

@ -1,209 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define STM32F103_MCUCONF
/*
* STM32F103 drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED FALSE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_USB_CLOCK_REQUIRED TRUE
#define STM32_USBPRE STM32_USBPRE_DIV1P5
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC1_IRQ_PRIORITY 6
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM5 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* RTC driver system settings.
*/
#define STM32_RTC_IRQ_PRIORITY 15
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
#endif /* _MCUCONF_H_ */

@ -1,3 +0,0 @@
# ChibiOS Test
Test code for the stm32_f103 one key keyboard

@ -1,47 +0,0 @@
# project specific files
SRC = matrix.c \
led.c
# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = GENERIC_STM32_F103
# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
# OPT_DEFS =
# MCU_LDSCRIPT = STM32F103x8
# BOARD = GENERIC_STM32_F103
# MAPLE MINI
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
# BOARD = MAPLEMINI_STM32_F103
## chip/board settings
# the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
MCU_FAMILY = STM32
MCU_SERIES = STM32F1xx
# linker script to use
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
# startup code to use
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = stm32f1xx
# it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
# Cortex version
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
MCU = cortex-m3
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 7
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
# a custom board definition that you plan to reuse).
# If you're not setting it here, leave it commented out.
# It is chip dependent, the correct number can be looked up here (page 175):
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
# This also requires a patch to chibios:
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800

@ -1,7 +0,0 @@
#ifndef STM32_F103_ONEKEY_H
#define STM32_F103_ONEKEY_H
#include "chibios_test.h"
#define LAYOUT(k00) {{ k00 }}
#endif

@ -1,524 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef CHCONF_H
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
/*===========================================================================*/
/**
* @name System timers settings
* @{
*/
/*===========================================================================*/
/**
* @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
#define CH_CFG_ST_RESOLUTION 32
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#define CH_CFG_ST_FREQUENCY 1000
/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
#define CH_CFG_ST_TIMEDELTA 0
/** @} */
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
* @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 20
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
#define CH_CFG_MEMCORE_SIZE 0
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
* infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
/* Use __WFI in the idle thread for waiting. Does lower the power
* consumption. */
#define CORTEX_ENABLE_WFI_IDLE TRUE
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#define CH_CFG_OPTIMIZE_SPEED TRUE
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_REGISTRY TRUE
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_WAITEXIT TRUE
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_SEMAPHORES TRUE
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MUTEXES TRUE
/**
* @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased
* memory footprint.
*
* @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_CONDVARS TRUE
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_EVENTS TRUE
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MESSAGES TRUE
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_MAILBOXES TRUE
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMCORE TRUE
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#define CH_CFG_USE_HEAP TRUE
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMPOOLS TRUE
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
#define CH_CFG_USE_DYNAMIC TRUE
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, kernel statistics.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_STATISTICS FALSE
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_CHECKS TRUE
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_ASSERTS TRUE
/**
* @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_BUFFER_SIZE 128
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#define CH_DBG_ENABLE_STACK_CHECK TRUE
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_FILL_THREADS TRUE
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p FALSE.
* @note This debug option is not currently compatible with the
* tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API.
*
* @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
/**
* @brief ISR enter hook.
*/
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \
}
/**
* @brief ISR exit hook.
*/
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \
}
/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \
}
/**
* @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \
}
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
/**
* @brief Trace hook.
* @details This hook is invoked each time a new record is written in the
* trace buffer.
*/
#define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \
}
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* CHCONF_H */
/** @} */

@ -1,6 +0,0 @@
#ifndef KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_
#define KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_
#include "../config.h"
#endif /* KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ */

@ -1,354 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 1
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */

@ -1,97 +0,0 @@
# Teensy LC, 3.0, 3.1, 3.2 support
These ARM Teensies are now supported through [ChibiOS](http://chibios.org).
## Installing the ARM toolchain
You'll need to install an ARM toolchain, there is now a nice documentation about the two AVR/ARM toolchain:https://docs.qmk.fm/getting_started_build_tools.html and you can just run `sudo util/install_dependencies.sh`.
This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting.
You can find others way with the [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output.
## Installing ChibiOS
Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories: [chibios-main](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS).
### If youre using git
Run `git submodule sync --recursive && git submodule update --init --recursive`. This will install ChibiOS and ChibiOS-Contrib in the `/lib/` directory.
### If youre not using Git
If you're not using git, you can just download a [zip of chibios from here](https://github.com/ChibiOS/ChibiOS/archive/a7df9a891067621e8e1a5c2a2c0ceada82403afe.zip), unpack the zip, and rename/move the unpacked directory (named `ChibiOS-<long_hash_here>`) to `lib/chibios/chibios` (so that the file `lib/chibios/chibios/license.txt` exists). Now the same procedure with a [zip of chibios-contrib from here](https://github.com/ChibiOS/ChibiOS-Contrib/archive/e1311c4db6cd366cf760673f769e925741ac0ad3.zip): unpack and move `ChibiOS-Contrib-<long_hash_here>` to `lib/chibios/chibios-contrib`.
(If you're using git, you can just clone the two repos: [chibios](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS-Contrib). However - be warned that things may be somewhat out-of-sync (updates at different rates), so you may need to hunt a bit for the right commits.)
(Why do we need chibios-contrib? Well, the main repo focuses on STM32 chips, and Freescale/NXP Kinetis chips are supported via the Contrib repository.)
This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`.
For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`.
## About this onekey example
It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`.
## Credits
TMK itself is written by hasu, original sources [here](https://github.com/tmk/tmk_keyboard).
The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions.
## Features that are not implemented yet
Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome).
# Matrix programming notes
The notes below explain what commands can be used to examine and set the status of Teensy pins.
## ChibiOS pin manipulation basics
### Pins
Each pin sits on a "port", each of which comprises at most 32 individual pins.
So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number.
Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number.
### Mode
A MCU pin can be in several modes. The basic command to set a pin mode is
palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP);
The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW).
### Setting
Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by
palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
or set LOW by
palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
Toggling can be done with
palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn);
Alternatively, you can use
palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit);
where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`).
### Reading
Reading pin status is done with
palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`).
### Further docs
All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html).

@ -1,32 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "hal.h"
#include "led.h"
void led_set(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output high
palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
} else {
// Hi-Z
palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_INPUT);
}
}

@ -1,163 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ch.h"
#include "hal.h"
/*
* scan matrix
*/
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "wait.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
#define LED_ON() do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0)
#define LED_OFF() do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
#define LED_TGL() do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
void matrix_init(void)
{
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
//debug
debug_matrix = true;
LED_ON();
wait_ms(500);
LED_OFF();
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
wait_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
wait_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
/* Column pin configuration
*/
static void init_cols(void)
{
// internal pull-up
palSetPadMode(TEENSY_PIN2_IOPORT, TEENSY_PIN2, PAL_MODE_INPUT_PULLUP);
}
/* Returns status of switches(1:on, 0:off) */
static matrix_row_t read_cols(void)
{
return ((palReadPad(TEENSY_PIN2_IOPORT, TEENSY_PIN2)==PAL_HIGH) ? 0 : (1<<0));
// | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
}
/* Row pin configuration
*/
static void unselect_rows(void)
{
palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_INPUT); // hi-Z
}
static void select_row(uint8_t row)
{
(void)row;
// Output low to select
switch (row) {
case 0:
palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_OUTPUT_PUSHPULL);
palClearPad(TEENSY_PIN5_IOPORT, TEENSY_PIN5);
break;
}
}

@ -1,55 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define KL2x_MCUCONF
/*
* HAL driver system settings.
*/
#if 1
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
#define KINETIS_PLLCLK_FREQUENCY 96000000UL
#define KINETIS_SYSCLK_FREQUENCY 48000000UL
#endif
#if 0
/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */
#endif
/*
* SERIAL driver system settings.
*/
#define KINETIS_SERIAL_USE_UART0 TRUE
/*
* USB driver settings
*/
#define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default is for K20x */
/* This is for Teensy LC; you should comment it out (or change to 5)
* for Teensy 3.x */
#define KINETIS_USB_USB0_IRQ_PRIORITY 2
#endif /* _MCUCONF_H_ */

@ -1,3 +0,0 @@
# ChibiOS Test
Test code for the teensy lc one key keyboard

@ -1,45 +0,0 @@
# project specific files
SRC = matrix.c \
led.c
## chip/board settings
# - the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
# - For Teensies, FAMILY = KINETIS and SERIES is either
# KL2x (LC) or K20x (3.0,3.1,3.2).
MCU_FAMILY = KINETIS
MCU_SERIES = KL2x
# Linker script to use
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
# - LDSCRIPT =
# - MKL26Z64 for Teensy LC
# - MK20DX128 for Teensy 3.0
# - MK20DX256 for Teensy 3.1 and 3.2
MCU_LDSCRIPT = MKL26Z64
# Startup code to use
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
# - STARTUP =
# - kl2x for Teensy LC
# - k20x5 for Teensy 3.0
# - k20x7 for Teensy 3.1 and 3.2
MCU_STARTUP = kl2x
# Board: it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
# - BOARD =
# - PJRC_TEENSY_LC for Teensy LC
# - PJRC_TEENSY_3 for Teensy 3.0
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
BOARD = PJRC_TEENSY_LC
# Cortex version
# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
MCU = cortex-m0plus
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
ARMV = 6

@ -1,7 +0,0 @@
#ifndef TEENSY_LC_ONEKEY_H
#define TEENSY_LC_ONEKEY_H
#include "chibios_test.h"
#define LAYOUT(k00) {{ k00 }}
#endif

@ -1,4 +1,4 @@
/* Copyright 2018 Jack Humbert /* Copyright 2019
* *
* This program is free software: you can redistribute it and/or modify * This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@ -15,4 +15,9 @@
*/ */
#pragma once #pragma once
#include "quantum.h"
#include "config_common.h"
#define MATRIX_COL_PINS { B4 }
#define MATRIX_ROW_PINS { B5 }
#define UNUSED_PINS

@ -111,7 +111,7 @@
* @brief Enables the PWM subsystem. * @brief Enables the PWM subsystem.
*/ */
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE #define HAL_USE_PWM TRUE
#endif #endif
/** /**

@ -120,7 +120,7 @@
#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE #define STM32_PWM_USE_TIM3 TRUE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3 #define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3 #define STM32_PWM_TIM2_IRQ_PRIORITY 3
#define STM32_PWM_TIM3_IRQ_PRIORITY 3 #define STM32_PWM_TIM3_IRQ_PRIORITY 3

@ -0,0 +1,5 @@
# STM32F072 Discovery kit onekey
Supported Hardware: <https://www.st.com/en/evaluation-tools/32f072bdiscovery.html>
To trigger keypress, short together pins *B4* and *B5*.

@ -1,7 +1,3 @@
# project specific files
SRC = matrix.c \
led.c
## chip/board settings ## chip/board settings
# the next two should match the directories in # the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
@ -33,6 +29,6 @@ ARMV = 6
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch # <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
# Build Options # Options to pass to dfu-util when flashing
# comment out to disable the options. DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
# DFU_SUFFIX_ARGS = -p df11 -v 0483

@ -1,114 +0,0 @@
/* Copyright 2018 Jack Humbert
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0006
#define MANUFACTURER QMK
#define PRODUCT Proton C
#define DESCRIPTION A compact ortholinear keyboard
/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 1
#define MATRIX_ROW_PINS { B9 }
#define MATRIX_COL_PINS { B0 }
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
// #define WS2812_LED_N 2
// #define RGBLED_NUM WS2812_LED_N
// #define WS2812_TIM_N 2
// #define WS2812_TIM_CH 2
// #define PORT_WS2812 GPIOA
// #define PIN_WS2812 1
// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
//#define WS2812_EXTERNAL_PULLUP

@ -1,21 +0,0 @@
/* Copyright 2018 Jack Humbert
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = {{ KC_A }}
};

@ -1,25 +0,0 @@
/* Copyright 2018 Jack Humbert
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "proton_c.h"
void matrix_init_kb(void) {
// Turn status LED on
setPinOutput(C13);
writePinHigh(C13);
matrix_init_user();
}

@ -1,16 +0,0 @@
Proton C
===
![Proton C](https://i.imgur.com/xZrjIqa.jpg)
A Pro Micro drop-in replacement.
Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert)
Hardware Supported: QMK Proton C
Hardware Availability: [List of vendors](https://qmk.fm/proton-c)
Make example for this keyboard (after setting up your build environment):
make proton_c:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

@ -1,17 +0,0 @@
MCU = STM32F303
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = no
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = no
# SERIAL_LINK_ENABLE = yes
Loading…
Cancel
Save