Helix config refine (#3374)

* helix config.h refine

keyboards/helix/config.h

@@ -21,8 +21,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-#ifdef SUBPROJECT_rev1
-    #include "rev1/config.h"
-#endif
+// GCC include 'config.h" sequence in qmk_firmware/keyboards/helix/
+//   -include keyboards/helix/config.h
+//   -include keyboards/helix/rev?/config.h
+//   -include keyboards/helix/rev?/keymaps/MAPNAME/config.h
+//   XXXX.c
 
-#endif
+#include <serial_config.h>
+
+// GCC include search path in qmk_firmare/keyboards/helix/
+//    #include "..." search starts here:
+//    #include <...> search starts here:
+//     keyboards/helix/rev?/keymaps/MAPNAME
+//     keyboards/helix
+//     keyboards/helix/rev?
+//     .
+//     ./tmk_core
+//     ......
+
+#endif /* CONFIG_H */

keyboards/helix/rev1/config.h

@@ -19,8 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef REV1_CONFIG_H
 #define REV1_CONFIG_H
 
-#include "../config.h"
-
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x3060

keyboards/helix/rev1/keymaps/OLED_sample/config.h

@@ -21,8 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
-
 /* Use I2C or Serial */
 
 #define USE_I2C
@@ -37,8 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define SSD1306OLED
 
-#define USE_SERIAL_PD2
-
 #define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100

keyboards/helix/rev1/keymaps/OLED_sample/serial_config.h

@@ -0,0 +1,16 @@
+#ifndef SOFT_SERIAL_CONFIG_H
+#define SOFT_SERIAL_CONFIG_H
+
+/* Soft Serial defines */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+//// #error rev1/keymaps/OLED_sample serial config
+
+#endif /* SOFT_SERIAL_CONFIG_H */

keyboards/helix/rev1/keymaps/default/config.h

@@ -21,8 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
-
 /* Use I2C or Serial, not both */
 
 #define USE_SERIAL

keyboards/helix/rev1/serial_config.h

@@ -0,0 +1,16 @@
+#ifndef SOFT_SERIAL_CONFIG_H
+#define SOFT_SERIAL_CONFIG_H
+
+/* Soft Serial defines */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+/// #error rev1 serial config
+
+#endif /* SOFT_SERIAL_CONFIG_H */

keyboards/helix/rev2/config.h

@@ -19,8 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef REV2_CONFIG_H
 #define REV2_CONFIG_H
 
-#include "../config.h"
-
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x3060
@@ -37,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Use I2C or Serial */
 #define USE_I2C
 #define USE_SERIAL
-#define USE_SERIAL_PD2
 //#define USE_MATRIX_I2C
 
 /* Select hand configuration */

keyboards/helix/rev2/keymaps/default/config.h

@@ -21,8 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
-
 // place overrides here
 
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/edvorakjp/config.h

@@ -1,8 +1,6 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
-
 #undef TAPPING_FORCE_HOLD
 #undef TAPPING_TERM
 #define TAPPING_TERM 120

keyboards/helix/rev2/keymaps/five_rows/config.h

@@ -21,8 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
-
 // place overrides here
 
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/five_rows_jis/config.h

@@ -21,8 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
-
 /* Use I2C or Serial */
 
 #define USE_I2C
@@ -59,8 +57,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #error "expected HELIX_ROWS 4 or 5"
 #endif
 
-#define USE_SERIAL_PD2
-
 #define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100

keyboards/helix/rev2/keymaps/froggy/config.h

@@ -21,8 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
-
 #undef TAPPING_TERM
 #define TAPPING_TERM 200
 #define ONESHOT_TAP_TOGGLE 5 /* Tapping this number of times holds the key until tapped this number of times again. */

keyboards/helix/rev2/keymaps/led_test/config.h

@@ -21,8 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
-
 // place overrides here
 
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/matrix.c

@@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "matrix.h"
 #include "split_util.h"
 #include "pro_micro.h"
-#include "config.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"

keyboards/helix/rev2/serial_config.h

@@ -0,0 +1,16 @@
+#ifndef SOFT_SERIAL_CONFIG_H
+#define SOFT_SERIAL_CONFIG_H
+
+/* Soft Serial defines */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+
+//// #error rev2 serial config
+
+#endif /* SOFT_SERIAL_CONFIG_H */

keyboards/helix/rev2/split_util.c

@@ -7,7 +7,6 @@
 #include "split_util.h"
 #include "matrix.h"
 #include "keyboard.h"
-#include "config.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"

keyboards/helix/serial.c

@@ -110,16 +110,18 @@ void serial_master_init(void) {
 void serial_slave_init(void) {
   serial_input_with_pullup();
 
-#ifndef USE_SERIAL_PD2
+#if SERIAL_PIN_MASK == _BV(PD0)
   // Enable INT0
   EIMSK |= _BV(INT0);
   // Trigger on falling edge of INT0
   EICRA &= ~(_BV(ISC00) | _BV(ISC01));
-#else
+#elif SERIAL_PIN_MASK == _BV(PD2)
   // Enable INT2
   EIMSK |= _BV(INT2);
   // Trigger on falling edge of INT2
   EICRA &= ~(_BV(ISC20) | _BV(ISC21));
+#else
+ #error unknown SERIAL_PIN_MASK value
 #endif
 }
 

keyboards/helix/serial.h

@@ -1,28 +1,19 @@
-#ifndef MY_SERIAL_H
-#define MY_SERIAL_H
+#ifndef SOFT_SERIAL_H
+#define SOFT_SERIAL_H
 
-#include "config.h"
 #include <stdbool.h>
 
-/* TODO:  some defines for interrupt setup */
-#define SERIAL_PIN_DDR DDRD
-#define SERIAL_PIN_PORT PORTD
-#define SERIAL_PIN_INPUT PIND
-
-#ifndef USE_SERIAL_PD2
-#define SERIAL_PIN_MASK _BV(PD0)
-#define SERIAL_PIN_INTERRUPT INT0_vect
-#else
-#define SERIAL_PIN_MASK _BV(PD2)
-#define SERIAL_PIN_INTERRUPT INT2_vect
-#endif
-
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#ifdef KEYBOARD_helix_rev1
-#define SERIAL_MASTER_BUFFER_LENGTH 1
-#else
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-#endif
+// ////////////////////////////////////////////
+// Need Soft Serial defines in serial_config.h
+// ////////////////////////////////////////////
+// ex.
+//  #define SERIAL_PIN_DDR DDRD
+//  #define SERIAL_PIN_PORT PORTD
+//  #define SERIAL_PIN_INPUT PIND
+//  #define SERIAL_PIN_MASK _BV(PD?)   ?=0,2
+//  #define SERIAL_PIN_INTERRUPT INT?_vect  ?=0,2
+//  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+//  #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
 
 // Buffers for master - slave communication
 extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
@@ -33,4 +24,4 @@ void serial_slave_init(void);
 int serial_update_buffers(void);
 bool serial_slave_data_corrupt(void);
 
-#endif
+#endif /* SOFT_SERIAL_H */

keyboards/helix/ssd1306.h

@@ -4,7 +4,6 @@
 #include <stdbool.h>
 #include <stdio.h>
 #include "pincontrol.h"
-#include "config.h"
 
 enum ssd1306_cmds {
   DisplayOff = 0xAE,