add pin mapping and sweet16 test

pull/4661/head
Jack Humbert 6 years ago
parent 255173f379
commit f8c07e05c2

@ -88,8 +88,9 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
endif endif
ifeq ($(strip $(PROTON)), yes) ifeq ($(strip $(PROTON)), yes)
OPT_DEFS += -DPROTON_CONVERSION TARGET := $(TARGET)_proton_c
include $(STM32_PATH)/proton_c.mk include $(STM32_PATH)/proton_c.mk
OPT_DEFS += -DPROTON_CONVERSION
endif endif
include quantum/mcu_selection.mk include quantum/mcu_selection.mk

@ -27,6 +27,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
void led_set_user(uint8_t usb_led) { void led_set_user(uint8_t usb_led) {
#ifndef PROTON_CONVERSION
/* Map RXLED to USB_LED_NUM_LOCK */ /* Map RXLED to USB_LED_NUM_LOCK */
if (usb_led & (1 << USB_LED_NUM_LOCK)) { if (usb_led & (1 << USB_LED_NUM_LOCK)) {
DDRB |= (1 << 0); PORTB &= ~(1 << 0); DDRB |= (1 << 0); PORTB &= ~(1 << 0);
@ -40,4 +41,5 @@ void led_set_user(uint8_t usb_led) {
} else { } else {
DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
} }
#endif
} }

@ -125,6 +125,39 @@
#endif #endif
#elif defined(PROTOCOL_CHIBIOS) #elif defined(PROTOCOL_CHIBIOS)
#ifdef PROTON_CONVERSION
// Left side (front)
#define D3 PAL_LINE(GPIOA, 9)
#define D2 PAL_LINE(GPIOA, 10)
// GND
// GND
#define D1 PAL_LINE(GPIOB, 7)
#define D0 PAL_LINE(GPIOB, 6)
#define D4 PAL_LINE(GPIOB, 5)
#define C6 PAL_LINE(GPIOB, 4)
#define C7 PAL_LINE(GPIOB, 3)
#define E6 PAL_LINE(GPIOB, 2)
#define B4 PAL_LINE(GPIOB, 1)
#define B5 PAL_LINE(GPIOB, 0)
// Right side (front)
// RAW
// GND
// RESET
// VCC
#define F4 PAL_LINE(GPIOA, 2)
#define F5 PAL_LINE(GPIOA, 1)
#define F6 PAL_LINE(GPIOA, 0)
#define F7 PAL_LINE(GPIOB, 8)
#define B1 PAL_LINE(GPIOB, 13)
#define B3 PAL_LINE(GPIOB, 14)
#define B2 PAL_LINE(GPIOB, 15)
#define B6 PAL_LINE(GPIOB, 9)
// LEDs
#define D5 PAL_LINE(GPIOC, 13)
#define B0 PAL_LINE(GPIOC, 14)
#else
#define A0 PAL_LINE(GPIOA, 0) #define A0 PAL_LINE(GPIOA, 0)
#define A1 PAL_LINE(GPIOA, 1) #define A1 PAL_LINE(GPIOA, 1)
#define A2 PAL_LINE(GPIOA, 2) #define A2 PAL_LINE(GPIOA, 2)
@ -222,6 +255,7 @@
#define F14 PAL_LINE(GPIOF, 14) #define F14 PAL_LINE(GPIOF, 14)
#define F15 PAL_LINE(GPIOF, 15) #define F15 PAL_LINE(GPIOF, 15)
#endif #endif
#endif
/* USART configuration */ /* USART configuration */
#ifdef BLUETOOTH_ENABLE #ifdef BLUETOOTH_ENABLE

@ -1,5 +1,5 @@
ifneq ($(findstring STM32, $(MCU)),) ifneq ($(findstring STM32F303, $(MCU)),)
## chip/board settings ## chip/board settings
# - the next two should match the directories in # - the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)

@ -33,3 +33,6 @@ OPT_DEFS =
# Options to pass to dfu-util when flashing # Options to pass to dfu-util when flashing
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
RGBLIGHT_ENABLE = no
AUDIO_ENABLE = yes

Loading…
Cancel
Save