77a9df36a7
Update UC3 platform driver support to use the bitmasks defined in the header files over raw constants.
...
Start implementation of XMEGA platform drivers.
14 years ago
d9643cf6ec
Add start of an architecture port to the Atmel USB XMEGA devices.
14 years ago
5f51554a5e
Enhance and document the AVR32 UC3 platform drivers.
14 years ago
f152ff26c7
Add missing function attributes to the RingBuffer driver to reduce the chances of invalid usage.
...
Fix duplicated LED driver functions in the Doxygen documentation.
14 years ago
4e601207a7
Tighten up the implementations of the USB_Device_SetDeviceAddress(), USB_Controller_Reset() and USB_PLL_On() functions for the AVR8 devices.
...
Minor corrections to the documentation of the USB_Control_Request_t enum.
14 years ago
5a580c6854
Pull out Android Accessory Mode functions into a seperate set of files in the incomplete Android Accessory Mode Host demo. Improve Android Accessory Mode protocol support to correctly query the device's supported protocol and send the approriate device information strings.
14 years ago
75da0d1877
Update AudioInput and AudioOutput Class Driver device mode demos to use a switch statement when selecting the audio request type for clarity.
14 years ago
8c3d421a01
Added board hardware driver support for the EVK1104 board.
...
Fix inverted LEDs_GetLEDs() result for the EVK1100 and EVK1101 boards.
14 years ago
8cc3fd56d9
Add board driver support for the EVK1100 board.
14 years ago
2e6370a6b9
Add missing project files for the new HIDReportViewer project to upgrade its status to a finished (working) project.
14 years ago
00acc95ff6
Add new incomplete HIDReportViewer project.
14 years ago
d8fe01f19a
Rename new Audio class driver functions, callbacks and events to ensure that they contain the USB mode (Device or Host) in the function names.
14 years ago
e5e34f91fa
Fix compile errors when both Host and Device modes are enabled.
14 years ago
1191da7b7b
Add missing AS4 and project description files to the new Audio Host demos.
...
Correct errors in the existing Audio demo description files due to the new demo features (variable sampling rate vs. a fixed sampling rate).
14 years ago
1f1d0710f3
Add new Audio Class Driver Host demos.
...
Fix errors in the new Audio Host mode Class Driver, which would have prevented data from being sent or received properly by the device.
Add microphone/square wave generation compile time switch to the Low Level AudioOutput Host demo.
14 years ago
e572ee7ff2
Added new Host mode Audio Class driver.
...
Added new EVENT_Audio_StreamStartStopChange() event to the Audio Device Class driver to detect stream start/stop events.
14 years ago
2d778a3ff5
Add additional support files for the new low level AudioInputHost and AudioOutputHost demos.
14 years ago
85f39a58c5
Move completed low level Audio Host demos into the LowLevel folder from the Incomplete folder.
14 years ago
7dffa15c16
Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.
14 years ago
3bd6336075
Added board driver support for the Busware TUL board.
14 years ago
68468e0aea
Added new incomplete AudioOutputHost Host LowLevel demo.
14 years ago
ea922c98d1
Added new incomplete AudioInputHost Host LowLevel demo.
...
Added missing Audio class control request definitions.
Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.
14 years ago
6e7fc21a94
Fix incorrect macro guard in the UC3 EndpointStream header file.
...
Fix incorrect project name in the Projects/ folder makefile.
14 years ago
edc4db41f4
Update Webserver project to remove DHCP IP configuration status notification.
14 years ago
b88e0a7b90
Add new MediaController project, a simple Media Playback control manipulator (Play/Pause/Next Track/Volume/etc.).
14 years ago
3cba88e4c0
Add RNDIS Device support to the Webserver project, so that the files stored on the device can be viewed from a web-browser while the board is plugged into a host machine.
14 years ago
9d733d44b4
Add new RNDIS_Host_IsPacketReceived(), RNDIS_Device_ReadPacket() and RNDIS_Device_WritePacket() functions to the Device RNDIS Class Driver.
...
Modify RNDIS demos to suit the simplified Ethernet_Frame_Info_t structure.
14 years ago
049e930963
Fixed possible invalid program execution when in host mode if corrupt descriptor lengths are supplied by the attached device.
...
Minor code cleanups to add const and reformat where missing, as well as abstract out the internal device signature start address into a macro, so that it can be altered to suit particular devices within a single architecture if needed.
Add missing documentation to the USB_Device_States_t enum.
14 years ago
16f09ab50a
Add makefile template for the AVR32 UC3 architecture.
14 years ago
70284d390f
Add in a new common Delay_MS() function, which provides a blocking delay for all architectures.
...
Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.
Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.
14 years ago
fe62770a1e
Added new VirtualSerialMassStorage Device Class Driver demo.
14 years ago
944e0d2009
Rename UC3B driver files to UC3, as they are generic to all AVR32 UC3 models.
14 years ago
f301a4a21f
Oops - rename misnamed Endianess.h header file.
...
Remove UC3B temp macros related to EEPROM, to ensure that projects requiring this break at compile time rather than at runtime until a solution can be found.
14 years ago
b1528a1256
Move out endianness management macros into a new common Endianness.h header.
...
Fix Doxygen documentation, broken due to the added ATTR_PACKED attribute on some structs breaking the Doxygen parser.
14 years ago
381dd0d490
Move out common architecture-independent core definitions into the appropriate core dispatch header files.
14 years ago
f3f481183a
More AVR32 UC3B architecture ports - USB device mode applications can now be sucessfully compiled, although they will be currently non-functional.
14 years ago
cf2411435c
Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called.
...
More UC3B architecture porting.
14 years ago
66c38cd940
Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus).
14 years ago
b6a3c78fa3
Rename architecture specific driver files, to make them appear with uniquely identifying filenames in the documentation.
14 years ago
cad5e9ffca
Added start of a port of the core USB driver code to the AVR32 UC3B architecture.
14 years ago
1daa5e16f9
Initial restructuring of the core USB driver module to support multiple architectures in the future.
14 years ago
e0a3f26978
Move out Dataflash IC command constants headers into the general LUFA/Drivers/Misc/ directory rather than duplicating them inside the individual board driver folders.
14 years ago
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
14 years ago
100a197d0e
Reduced latency for executing the Start-Of-Frame events (if enabled in the user application).
14 years ago
31ed53af55
Add missing HID bootloader AVRStudio project.
14 years ago
0019fbd129
Add more const-ness to the stream endpoint/pipe functions where possible.
14 years ago
7d823d926f
Update HID bootloader loader application to support the VID/PID used by the bootloader.
14 years ago
cae0fa73d7
Added HID class bootloader, compatible with a modified version of the command line Teensy loader from PJRC.com.
14 years ago
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
14 years ago
a852ea8e43
Added new KeyboardMouseMultiReport Device ClassDriver demo.
...
Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used.
Added new MAX() and MIN() convenience macros.
14 years ago
Dean Camera